Phoenix Gold RSD300.1 User Manual

MONOBLOCK AMPLIFIER
OWNER’S MANUAL
FOR MODELS:
RSd300.1
RSd600.1
Congratulations on your purchase of high quality Phoenix Gold audio electronics. At Phoenix Gold our highest concern is musical reproduction. We appreciate that you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products to give your system all the clarity and richness you deserve.
Great product and competent installations are only one piece of the puzzle when it comes to your system. Make sure that your install is using only the best installation accessories. Phoenix Gold manufactures everything from RCA cables and speaker wire to power/ground cable and battery connectors. With proper installation and accessories your system will sound the best that it can.
For more information about Phoenix Gold electronics, speakers and accessories please visit www.phoenixgold.com
RSd AMPLIFIERS
MONOBLOCK OWNER’S MANUAL
WARRANTY
LIMITED WARRANTY ELECTRONICS (USA)
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the defective product
WARRANTY IS VOID IF THE PRODUCT’S SERIAL NUMBER HAS BEEN REMOVED OR DEFACED.
with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.
Any applicable implied warranties are limited in duration to the period of the express warranty as provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to this product thereafter. Some states do not allow limitations
IF YOU NEED SERVICE ON YOUR PHOENIX GOLD PRODUCT:
All warranty returns should be sent to Phoenix Gold’s Product Service Facility freight-prepaid through an authorized Phoenix Gold dealer and must be accompanied by proof of purchase (a copy of the original sales receipt). Direct returns from consumers or non-authorized dealers will require a Return Authorization number from Phoenix Gold in advance of any shipment to the product service facility. Units returned to Phoenix Gold without an RA number may be subject to refusal or delays.
FOR SERVICE INFORMATION IN THE U.S.A. PLEASE CALL:
Phoenix Gold customer service: (503) 286-9300 during normal business hours (8:30 AM – 5:00 PM Pacific Standard Time)
PHOENIX GOLD INTERNATIONAL, INC
9300 North Decatur St. Portland, OR 97203 (do not send product for repair to this address)
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s distributor and not by Phoenix Gold International, Inc.
on implied warranties, therefore these exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Warranty expiration on products returned without proof of purchase will be determined from the manufacturing date code. Coverage may be invalidated as this date is previous to purchase date. Non-defective items received will be returned freight-collect. Customer is responsible for shipping charges and insurance in sending the product to Phoenix Gold. Freight damage on returns is not covered under warranty.
Use the following area provided to record your serial number and date of purchase.
Serial Number ________________________ Date of Purchase ________________________
Phoenix Gold International, Inc. • 9300 North Decatur St. Portland, OR 97203 • 503.286.9300 • www.phoenixgold.com
SPECIFICATIONS:
RSd 300.1
MONOBLOCK CLASS A/B POWER AMPLIFIER
MONOBLOCK OWNER’S MANUAL
RSd AMPLIFIERS
FEATURES:
CEA-2006 Compliant Amplifier Power Standard
Frequency Response . . . . . . . . 10Hz to 300Hz
Effective Damping Factor . . . . . . 6.39 @ 4 ohms
Maximum Input . . . . . . . . . . 11.8V at clipping
Maximum Sensitivity . . . . . . . . 200mV at clipping
Ratings other than CEA-2006
Power Output . . . . . . . . . . . 360W RMS @ 2 Ohms, 100Hz and 1% THD+N
Bass Boost . . . . . . . . . . . . +18dB @ 45Hz
Low Pass Filter Frequency Response. . 30 to 300Hz Lowpass, 18dB per octave Subsonic Filter Frequency Response . . 5 to 55Hz Highpass, 18dB per octave
Dimensions (L x W x H): . . . . . . . 12 7/8” x 11 3/16” x 2 3/8”
RSd 600.1
MONOBLOCK CLASS D POWER AMPLIFIER
CEA-2006 Compliant Amplifier Power Standard
Power Output . . . . . . . . . . 400W RMS @ 4 ohms and 1% THD+N
Signal to Noise Ratio . . . . . . . . 82 dBA (reference: 1W output @ 4 ohms)
Frequency Response . . . . . . . . 10Hz to 300Hz
Effective Damping Factor . . . . . . 6.39 @ 4 ohms
Maximum Input . . . . . . . . . . 10V at clipping
Maximum Sensitivity . . . . . . . . 200mV at clipping
BUILT-IN ELECTRONIC CROSSOVER
Monoblock: 18dB per octave electronic crossover for low­pass and an 18dB per octave subsonic filter.
ON BOARD PROTECTION
The on-board protection circuitry monitors abnormal conditions such as voltage spikes, short circuit and over thermal limits. When any of these conditions exist, the protection circuit will shut down the amplifier and light up the protection indicator to identify the problem. Once the problem is resolved, the amplifier will return to normal operation automatically.
HIGH SPEED HIGH CURRENT MOSFET SWITCHING POWER SUPPLY
High current MOSFET transistors are used in the power supply section to minimize internal heat and maximize reliability.
HIGH CURRENT/HIGH VOLTAGE FULLY COMPLEMENTARY OUTPUT STAGE
Complementary output stage audio circuitry has been a standard in high end home amplifier design. Phoenix Gold is one of the very few car audio manufacturers to incorporate this design approach into a mobile audio amplifier.
LINE OUTPUTS
The amplifiers full-range line outputs can be used to feed signals to another amplifier for future expansion or for setting up a more sophisticated system.
WIDE RANGE INPUT SENSITIVITY ADJUSTMENT
The input sensitivity level of this amplifier can be easily varied from as low as 200 mV to as high as 8.0 volts by adjusting the control on the Input Panel.
Ratings other than CEA-2006
Power Output . . . . . . . . . . . 650W RMS @ 2 ohms, 100Hz and 1% THD+N
Bass Boost . . . . . . . . . . . . +18dB @ 45Hz
Low Pass Filter Frequency Response. . 30 to 265Hz Lowpass, 18dB per octave Subsonic Filter Frequency Response . . 5 to 55Hz Highpass, 18dB per octave
Dimensions (L x W x H): . . . . . . . 16 7/8” x 11 3/16” x 2 3/8”
Due to continual product improvement, all specifications subject to change without notice.
MULTI-FUNCTION PROTECTION INDICATOR
When the red protect indicator lights up it signifies a high operating temperature is detected and the amplifier is temporarily shut down to allow for a cooling period. As soon as the temperature returns to a safe level, the amplifier will restart and resume normal operation. This indicator also lights up when the amplifier detects either an over-current situation, shorted speaker outputs or a DC offset at the outputs. Turn off the amplifier; double-check all inputs and speaker connections to make sure there is no short or inappropriate input. If all connections are in order, turn on the amplifier to resume operation.
VARIABLE BASS BOOST
The bass boost will increase the output centered at 45Hz from 0 to 18dB
Phoenix Gold International, Inc. • 9300 North Decatur St. Portland, OR 97203 • 503.286.9300 • www.phoenixgold.com
Loading...
+ 5 hidden pages