Phoenix Gold Octane ZR Owner's Manual

LIMITED WARRANTY

Phoenix Gold International, Inc. (or "Phoenix Gold") warrants its products against defects
in materials and workmanship for a limited period of time. For a period of 90 days from date of
original purchase, we will repair or replace the product, at our option, without charge for parts
and labor. Customer must pay all parts and labor charges after the limited warranty period
expires. The limited warranty period for factory refurbished products expires after ninety (90)
days from date of original purchase. The warranty is extended to 2 years from date of purchase
if installed by an authorized Phoenix Gold dealer. This limited warranty applies only to
purchases from authorized Phoenix Gold Electronics/Speaker retailers.

This limited warranty is extended only to the original purchaser and is valid only to
consumers in the United States. Consumers are required to provide a copy of the original sales
invoice from an authorized Phoenix Gold dealer when making a claim against this limited
warranty. This limited warranty only covers failures due to defects in materials or workmanship
that occur during normal use. It does not cover failures resulting from accident, misuse, abuse,
neglect, mishandling, misapplication, alteration, faulty installation, modification, service by
anyone other than Phoenix Gold, or damage that is attributable to Acts of God. It does not cover
costs of transportation to Phoenix Gold or damage in transit.

This warranty will become void if the serial number identification has been wholly or
partially removed, altered or erased. Repair or replacement under the terms of this warranty
does not extend the terms of this warranty. Should a product prove to be defective in
workmanship or material, the consumer's sole remedies will be repair or replacement as
provided under the terms of this warranty. Under no circumstances shall Phoenix Gold be liable
for loss or damage, direct, consequential or incidental, arising out of the use of or inability to
use the product. There are no express warranties other than described above.

© 2003 PHOENIX GOLD INTERNATIONAL

9300 North Decatur St. • Portland, OR 97203

www.phoenixgold.com

CAUTION

Octane ZR Components are capable of extremely high sound
volumes. Prolonged exposure to these high sound levels can cause
hearing loss. We want you to enjoy your Phoenix Gold speakers for a
long time to come. Please exercise reason and restraint accordingly.

Congratulations on your purchase of a new Octane ZR Component
loudspeaker system. By purchasing Phoenix Gold, you’ve
demonstrated a desire to own the finest in audio reproduction.
Phoenix Gold strives to provide you, the customer, with the most
thoroughly engineered and tested car audio products possible.

OCTANE ZR COMPONENT FEATURES

• Developed by Phoenix Gold from the ground up to set new standards in performance.

• 25mm, ferro-fluid filled, parachute-silk dome tweeters.

• Grained aluminized polypropylene cone material is precisely injection molded to be very
light and rigid for excellent signal tracking.

• Optimized magnet/motor structures result in high efficiency and clarity.

• Advanced butyl rubber surround is more rugged than foam, won’t break down from
moisture or UV, and is extremely well damped.

• Flat linear roll spider reduces distortion and provides maximum voice coil centering.

• Rigid powder coated steel frame

• Optimized 24dB/octave acoustic crossover.

• Standard mounting sizes and bolt patterns

• Flexible tweeter mounting system.

1.04 REV A

Figure 2: Creating new speaker location

2 7

MODEL POWER FREQUENCY IMPEDANCE SENSITIVITY MOUNTING MOUNTING

HANDLING (HZ) (OHMS) (DB) DEPTH DIAM.

(RMS/PEAK) (INS.) (INS.)

ZR5.0 75/150 75-20K 4 89 2 3/8 4 1/2
ZR6.0 75/150 65-20K 4 90 2 1/2 5 1/8
ZR6.5 75/150 65-20K 4 90 2 3/4 5 5/8

SPECIFICATIONS

CROSSOVER INSTALLATION:

The crossover included with the Octane ZR component set is computer optimized to
give the most accurate in-car response possible. Use only the crossover provided.
The use of any other crossover may result in poor performance or damage to one or
more of the Octane ZR components. The Octane ZR crossover can be mounted any­where that is convenient. Common mounting positions are under the dashboard, in
the kick panel, or under the rear deck. Be cautious when mounting the crossover
inside of a door panel that might be exposed to moisture. Remove the crossover
cover to access the two internal mounting holes. Use the supplied mounting screws
to secure the crossover. Make sure that there is ample clearance on both sides of
the mounting surface to avoid damaging other equipment in the vehicle. Wire the
crossover to the component speakers and amplifier as shown.

IMPORTANT NOTE:

The Octane ZR crossover has been redesigned with flexibility in mind. We have
added a switch inside the crossover to allow either flat, musical response or +3dB
from the tweeter if desired. Make sure to adjust the tweeter crossover to your pre­ferred setting before hiding the crossover in the door or panel!

Figure 1: Factory speaker location