Phoenix Audio Technologies Condor Quick Start Manual

Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779

Zoom Quick Start Guide

for

Phoenix Audio Technologies

Condor Microphone Array (MT600)

Recommended Equipment for Zoom Setup:

1) One or Two TV Screens

2) Condor Microphone Array

3) Soundbar

The Condor Microphone Array (MT600) is only a microphone solution and it is rec­ommended to use external speakers, like a soundbar. The Condor has both optical
and RCA outputs to be used with majority of the speaker solutions available on the
market.

Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779

Step 1:

Connect Condor (MT600) to soundbar or external speaker using RCA or Optical
Cable.

Leave Condor (MT600) unplugged and powered o.

Step 2:

Connect Condor (MT600) to PC/Mac computer.

Plug in Condor (MT600) and power on device, speakers, TV, and computer. Upon

start-up, the Condor (MT600) will initialize and make a few audio notications used

measure and diagnose any audio issues which the digital signal processor will auto­matically correct the issues.

Step 3:

Zoom has two application options of either A) Zoom Room or B) Zoom Desktop
Application.

A) Zoom Room

- Launch Zoom Room application on iPad device and navigate to the Settings tab

by clicking the icon on the bottom left of the application.

- Start by rst disabling “Lock Settings” next to the settings button.

Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779

- Check to ensure both the microphone and speaker selection is (PHNX MT600)

- Disable “Software Echo Cancellation” and “Automatically Adjust Microphone
Level”

*Note - ‘Software Echo Cancellation” and “Automatically Adjust Micophone Level”
feature will conict with the hardware DSP and cause poor performance.

Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779

B) Zoom Desktop Client

- Launch Zoom Desktop Client and click Settings Audio

-Check to ensure both the “Test Microphone” and “Test Speaker” selection is

(PHNX MT600)

-Disable “Automatically Adjust Microphone”

-Enable “Preserve original sound from microphone”

Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779

*If option is not available, the selection must be enabled by the Zoom Admin
Account via the web-based settings panel - www.zoom.us/account/setting

1) Navigate to “Account Management” “Account Settings” “Audio
Options” “Edit” “Allow users to select original sound in their client
settings”

2) Ensure to save settings before exiting

3) Check Zoom Desktop Client for “Preserve
original sound from microphone” and Enable.

*Note: If option is still not available, log out and
relaunch the client.

Zoom Quick Setup Video for Condor:

https://www.youtube.com/watch?v=UNmOGfq9znw

For additional support please visit:

https://www.phnxaudio.com/zoom/

https://www.phnxaudio.com/support/

Phoenix Audio T

Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779

echnology Support:

[phone]