![](/html/67/675a/675a81e5d0481f39f2c84c96ea884f0a1e6435f9233898a243fbcd322f42cf6e/bg1.png)
USER MANUAL
QUATTRO 3 CONFERENCE SPEAKERPHONE
MODEL 303
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
![](/html/67/675a/675a81e5d0481f39f2c84c96ea884f0a1e6435f9233898a243fbcd322f42cf6e/bg2.png)
L1 Function
L2 Function
Power/Mute
Volume Down
Volume Up
4 Microphone
Array
The Q3 utilizes multiple microphones, a uniquely designed speaker, and a powerful DSP
to achieve commanding performance.
The Q3 can easily be paired with an interface module to enable it to communicate with
different types of infrastructures.
This guide will help you learn how to use your speakerphone and will reveal all the
features that come with it.
The Quattro3 (Q3) is a high-quality conference speakerphone that will turn any room into
a professionally sounding conference room. It has an exceptionally large pickup and
broadcasting range, yet is small in size and discrete in design.
QUATTRO3 OVERVIEW
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
![](/html/67/675a/675a81e5d0481f39f2c84c96ea884f0a1e6435f9233898a243fbcd322f42cf6e/bg3.png)
CONNECTING YOUR Q3
CONNECT TO A COMPUTER
This connection is for any session using your computer, such as Voice Over IP applications
(Skype, Vidyo, etc.)
1 Using the USB cable provided, plug the mini USB side of the cable into
the Q3 (located on the connector panel below the unit).
2 Plug the USB end of the cable into any USB port on your computer.
Your Quattro3 is ready to use.
No additional drivers or steps are needed. However we do recommend downloading and using
our “Phoenix Audio Setup Utility” for optimal audio control and performance. This utility can
be found on our website: www.phnxaudio.com
CONNECT TO A SMART DEVICE
This connection is for any session using a smart phone, tablet, or any device that requires an
analog audio signal (Video Codec Systems, recorders, etc.).
1
Using the provided audio cable or any custom made cable, plug the 2.5mm 3-pin connector
side into the Q3’s “Audio Out” jack (located on the connector panel below the unit).
2 Plug the other end of the provided cable (3.5mm 4pin connector) into your smart phone
or table’s headphone/headset jack.
3 If applicable, make sure to select the use of the “headset” on your device. Your Quattro3
is ready to use.
2.5mm Analog
Audio Out
Interface Module
3.5mm External
Speaker/Microphone
Mini USB
Connector Panel
DC Power
Connector
Daisy Chain Connectors
Down (right)
Up (left)
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299