Phoenix M48-S, M48-A, M60-S, M72-S, M60-A Operator's Manual
...
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
page 1
Unifarm Machinery Corporation
PO Box 38, Wilson, NC
Operator’s Manual MOWERS
ATTENTION
Carefully read this manual
before using the machine
M48-S M48-A M60-S M60-A M72-S M72-A M84-S M84-A
903182002
-
00
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
page 2
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
page 3
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
252-291-3997 Fax: 252-291-7354
Dealer’s
Stamp
No part of this manual shall be reproduced, copied or disseminated by any means, without Unifarm
Machinery Corporation’s prior authorization in writing.
Unifarm Machinery Corporation reserves the right to make any necessary changes without giving
prior notice, in order to optimize the quality and safety features and does not commit itself to
updating this manual every time a change is made.
This booklet provides a thorough and accurate description of the instruction and maintenance
activities to be carried out on the tiller you purchased. We congratulate you on your choice and
urge you to thoroughly familiarize yourself with and follow the instructions contained in this manual.
This will assure you a long, safe and trouble free working life for your Phoenix Tiller.
The Manufacturer shall not assume any responsibility should problems arise as a result of
lack of compliance with the instructions and/or operator’s negligence.
The manual is divided in chapters and paragraphs and the pages are numbered, thus offering
accurate and precise information.
The requested information can be easily found by searching the key words or referring to the index.
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
page 4
INDEX
GENERAL INFORMATION
Symbols Page 5
Safety labels Page 6
Technical data Page 7
Main parts Page 7
Identification plates Page 8
Recommended use Page 8
Inappropriate use Page 8
Torque specification Page 8
SAFETY
Safety in the workplace Page 9
User’s requirements Page 9
Work clothing Page 9
General safety norms Page 9
SET UP
Assembling Page 11
Front roller kit Page 12
Attachment to the tractor Page 13
Connection to PTO shaft Page 14
Cutting height adjustment Page 14
Belts adjustment Page 15
Start up Page 15
Road transport Page 16
Shut down Page 16
MAINTENANCE
Program Page 16
Blade replacement Page 18
Spare parts Page 18
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
page 5
GENERAL INFORMATION
SYMBOLS
This booklet contains three “safety pictograms” which highlight the relevant danger levels or
important information:
It draws the operator’s attention to special situations which
may jeopardize people’s safety.
It draws the attention to situations which unfavourably affect
the machine efficiency, but not people’s safety.
It is used for general information, when people’s safety or
the efficiency of the parts are not at risk.
Unifarm Machinery Corporation
PO Box 38, Wilson, NC, U.S.A.
page 6
SAFETY LABELS
The safety labels and information on the machine, described in, must be complied with. Failure to
comply with these warnings may result in severe injuries or even death. Make sure that the labels
are always present and legible; should this not be the case, contact your nearest PHOENIX dealer to
request replacements.
1 2 3 4
5 6 7 8
Loading...