Phil Jones Bass D-1000 User Manual

Phil Jones Bass

PJB D-1000

OWNER’S MANUAL

into designing and building this no compromise, high performance compact amplifier.
It was conceived to be a dedicated amplifier for the “connoisseur” bassist. Reading this
manual will enable you to get the best performance from it so that you may enjoy many
years of service.

READ THIS FIRST

•

• On receipt of product, check for any signs of physical damage arising from shipping.

If any damage is visible contact your dealer.

• Keep all original packing.

• Do not locate this amplifier near any heat source.

• This amplifier must be connected only to a power source specified in this manual.

• For safety do not leave the amplifier plugged into a power source for long periods

• Do not let any liquid or foreign objects fall into any openings on the amplifier.

• Never use this amplifier if it has:

1. Suffered any physical damage.

2. Been subjected to any liquids, rain or moisture.

3. Damaged cables connected to it.
If any of the above occurs, the amplifier should be examined by qualified service
personnel.

• Always operate this amplifier with the correctly rated fuse.

• Never use this amplifier without proper grounding.

• The mains plug is used as disconnect device, the disconnect device shall remain

readily operable.

The apparatus should be connected to a mains

• Correct disposal of this product. This marking indicates that this product should

not be disposed with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources.

• The apparatus shall not be exposed to dripping or splashing.

1

FRONT PANEL AND BACK PANEL OVERVIEW

PRE

GND

D-1000

POWER

LO-TREBLE

MID

HI-TREBLE

0

0

LIMITER

+18dB-18dB

+18dB-18dB

ON

LEVEL

AUX IN

MAXMINMINMAX

MAXMIN

VOLUME

PHONE

INPUT

0

+18dB-18dB

INPUT LEVEL

OVERLOAD

MUTE

LOW

HIGH

-18dB

LO-BASS

0

+18dB

HI-BASS

0

+18dB-18dB

-18dB0+18dB

PHIL JONES BASS

3

4

2

1

5

6

7

8 9 1011 12 13 14 15 16 17

FRONT PANEL

PHIL JONES BASS

MODEL:

EQ

POST

LIFT

DI OUT

LINE IN

PRE-AMP OUT

FX SEND

FX RETURN

SPEAKER OUT

MINIMUM IMPEDANCE 8 OHMS EACH

D-1000

AC~INPUT

100 - 240V~ 50 / 60Hz

Power Consumption:1200W

CAUTION

BEFORE OPENING
PULL MAIN PLUG

NO USER SERVICEABLE PARTS INSIDE

REFER TO OWNERS MANUAL

POWER

ON

I

O

OFF

18 19 20 21 22 23 24 25 26 27

BACK PANEL

2

FRONT AND BACK PANEL DESCRIPTION

1. PASSIVE BASS INSTRUMENT INPUT JACK.

This is a standard ¼ inch mono jack socket.
For the best possible sound we recommend you use the PJB BI-12 instrument cable as

of sound and less noise than other instrument cables.

2. INPUT LEVEL ADJUSTMENT.

This is a fine-tuning adjustment (+/- 18dB) to get the precise match between your

level on the input level control.

3. LED CLIP/MUTE INDICATOR.

Green is Mute, Red is overloaded input.

4. INPUT /MUTE SWICTH.

Mute On

signal from modern high-end basses.

-

pickups enabling them to faithfully reproduce the true frequency and dynamic range of
the instrument

5. LOW BASS EQ CONTROL.

This will adjust the fundamental tones of E and A strings on 4 string basses and B, E &
A on 5 string basses.

6. HIGH BASS EQ CONTROL.

This will adjust the fundamental tones of D and G-strings on 4 &5 string basses.

7. MID RANGE EQ CONTROL.

8. LOW TEBLE EQ CONTROL.

9. HIGH TREBLE (PRESCENCE) EQ CONTROL.

10. COMPRESSOR THRESHOLD LEVEL CONTROL.

this to suit your playing style and output power of your instrument. The blue LED will
light up when the signal is being compressed. This will vary on how hard the instrument
is played and how the threshold is adjusted.

11. COMPRESSOR INDICATOR.

This blue L.E.D will light up when the signal is being compressed. This will vary on how
hard

the instrument is played and how the threshold is adjusted.

3