Philips xenium x806 User Manual

Discover your phone

Philips continuously strives to improve its products. Therefore, Philips reserves the rights to revise this user guide or withdraw it at any time without prior notice. Philips provides this user guide "as is" and does not accept, except as required by the applicable law, liability for any error, omission or discrepancy between this user guide and the product described. The device is meant to be connected to GSM/GPRS/EDGE networks.

Status pull-down

USB port/charger & headset connector

262K TFT LCD

touch screen

Power on/off key,

Unlock/lock key

+/- Volume key

Camera key

Hang-up key

Camera flash/ Torch

SIM settings

shortcut

Functional displays

Light sensor

Slide bar

Pick-up key

Back of phone

5.0MP camera lens

Loud speaker

Shortcut icons

Microphone

How to...

Switch the phone On/Off Long press the power on/off key ) on the top of the phone.

Enter your PIN code Enter your PIN code through the on-screen keypad and tap on

OK to confirm.

Unlock/lock the screen Short press ) on the top of the phone. To lock the screen,

short press ).

Enter SIM settings on the idle screen

On the idle screen, tap SIM settings shortcut .

Make a call On the idle screen, tap on to select a contact, or to

enter a phone number, and then, press A.

Answer a call When the phone rings, press A .

Mute the ringing call or sounding alarm

When the phone/alarm rings, turn over the phone, front side to the back, or back side to the front (if you have turned on the options in > Settings > General > Motion sensor).

Activate/Deactivate handsfree mode

During a call, tap on H-Free/H-Held.

End a call Press B.

View prompt screen of new message/missed call

If receiving a new message/missed call, the prompt icon will keep flashing on the idle screen. Tap on the icon to check for new message/missed call.

Check or write messages On the idle screen, tap on .

Access the main menu On the idle screen, tap on .

Quickly return to idle when browsing menus

Press B.

Show functional displays on the idle screen

Go to > Settings > Dashboard. Select and turn on your desired displays.

Switch between displays Slide the bar below displays. Or, tap on or .

Access the status pull-down menu Tap on at the top of idle screen. Tap to select options.

Enter the camera/video mode Long press the Camera key on idle screen. Tap / to select

the camera/video mode.

Select on-screen input keypads/ modes

Qwerty keypad : On the editing screen, turn the phone counterclockwise by 90 degrees, vertical to horizontal. Alphanumeric keypad : Turn the horizontal phone clockwise by 90 degrees, horizontal to vertical. Handwriting recognition mode : Tap on / to switch between the two modes. Tap on the language, numeric, or input method icon to select.

Quick access to functions

You can quickly access functions directly from the idle screen (using the shortcut icons, functional displays, or status pull-down menu), or through the main menu.

Shortcut icons

On the idle screen, the four shortcut icons lead you directly to four functional displays.

: Quick access to messaging

: Quick access to phonebooks

: Quick access to dial pad

: Quick access to main menu

Main menu

The main menu gives you access to all the different features of your mobile phone. The table below summarizes the functional icons on the main menu. To find more information about their functions, refer to the pages.

Tap on on idle screen to access the main

Fun Browser Music

page 62 page 50 page 64

Camera Messaging My files

page 52 page 26 page 70

Tools Contacts Profiles

page 42

page 37

page 78

Bluetooth Calls Settings

page 75 page 73 page 79

menu. To select your option, tap on the icons and lists, and then OK. Tap on Options to access the options related to the selected item. Tap on

Back to return to the previous menu. Press B

to return to the idle screen.

Functional displays

On the idle screen, you can switch between up to 9 displays. You can use the empty idle screen, show clock time (if you select Analog or Digital in

Settings > General > Time & date > Display time),

or select a functional display.

With such functional displays, you can quickly check world clock (World clock); or check or edit to-do list (Calendar) or memos (Quick notes); or conveniently send messages to up to 3 recent contacts/numbers of outgoing messages (Messaging); or place a call to preset contacts just by a long tap (Quick call); or play music (Music) or listen to radio (FM radio) from the idle screen.

Customize functional displays

Select up to 7 functional displays as needed.

Go to Settings > Dashboard.

Select your option. Tap on On/Off to select or unselect.

Tap on Done to finish setting.

Switch between different displays

• Slide the bar below displays.

•Or, tap on / .

Status pull-down menu

By dragging at the top of the idle screen, you can quickly turn on/off the alarm, torch, Bluetooth, or silent mode; check battery level; and select your desired profile, or ring type for incoming calls or messages.

SIM settings shortcut and prompt screen

SIM settings shortcut and prompt screen are located under status bar.

Tap SIM settings shoutcut icon to set your SIM card slot1 and slot2.(see "SIM settings" on page 79).

The prompt screen displays current prompt informatin of phone. If receiving a new message, E-mail or missed call, the prompt icon will keep flashing. Tap on this icon to open prompt screen, and tap to select the desired information.

Stylus

The touch screen allows you to enter text by directly writing on the screen, or tap to select the desired option. The supplied stylus makes it easier to do so.

The first time you switch on the phone, you are asked to do calibration for the stylus. Thus, strokes or taps by the stylus will be precisely displayed on the screen.

You can also do the calibration in Settings >

General > Pen calibration by following the screen

instructions.

Sensor

With built-in motion and light sensors, the phone can react to motion and ambient luminance as desired or necessary.

To use the motion sensor

•In Settings > General > Motion sensor > Mute

incoming call or Snooze alarm, select On.

If a call rings, turn over the phone (front side to back, or back side to front) to mute the ringtone.

To interrupt the sounding alarm in the same way, check that the Snooze is set to a time interval in Tools > Alarm (see "To set an alarm" on page 45). To stop the alarm, tap on Stop (see "To use an alarm" on page 45).

To use the light sensor

•In Settings > Display > Light sensor, select On. The phone will adjust backlight level automatically according to ambient brightness. For power-saving purposes, always turn on the light sensor.

Power-saving mode

After the set time span, the phone has the idle screen turned off automatically. To exit the power-saving mode, press any key. For powersaving purpose, set the time span to a low value in Settings > Display > Backlight duration.

Auto screen lock

In the idle mode, your phone can have the screen locked automatically after the set time span. When the screen is locked, a set of concentric circles keep moving on the screen.

To set the auto screen lock

Go to Settings > General > Auto screen lock.

To unlock the screen

Short press ) on the top of the phone. Or,

drag out the innermost dot.

To lock the screen manually

Short press ) on the top of the phone.

8 Table of contents

Table of contents

1 Getting Started 12

Insert the SIM card 12 Charge the battery 14 Set clock 15 Display local and

international clocks 16 Insert the micro-SD card 16

2 Text Entry 17

Using the Qwerty keypad 17 Using the supplied stylus

(the handwriting recognition mode) 18 Using the alphanumeric keypad 18

3 Calling 21

Making a call 21 Answering and ending a call 22 Options during a call 23

Handling multiple calls (Network-dependent) 24

Making an emergency call 25

4 Messaging 26

Creating messages 26 Sending messages from idle screen 28 Organizing your messages 29 Defining your message settings 30 E-mail 32 Broadcast messages 35

5 Contacts 37

Adding or editing contacts 37 Searching for a contact 38 Managing your contacts 39 Sharing contact information

with others 40

Table of contents

Table of contents 9

Backing up important contacts 40 Special numbers 41

6 Tools 42

Using your business organizer

Create your to-do list 42 Check your calendar 43

Edit your to-do list 43 Delete expired tasks 43

Using your memo

Display a text memo on the idle screen 43

Record a sound memo 44

Using your clock and timer

Alarm 45 World clock 46

Stopwatch 46

Text reader 46

Using the torch 47 Using your business assistant

Back up your phonebook 48 Firewall 48

Calculator 49 Currency converter 49

7 Browser 50

Managing your browser 51 Accessing web sites 50 Enabling/ disabling push messages 50 STK 51

8 Camera 52

Camera 52 Video recorder 58

9 Fun 62

Java 62

10 Table of contents

Sensor games 63

10 Music 64

Music player 64 FM radio 67

11 My files 70

Finding your files 70 Managing your files 70 Sharing your files 71 Using your files 72

12 Calls 73

Call history 73 Call options 73

13 Bluetooth 75

About Bluetooth 75 Connecting to a Bluetooth device 75

Getting connected by a Bluetooth device 76

Editing your device list 77

14 Profiles 78

Adjusting ringer settings to different scenes 78

15 Settings 79

SIM settings 79 Customize the functional displays

on idle screen 80 General 80 Display 83 Sounds 83 Connectivity 84

Icons & Symbols 86

Precautions 88

Table of contents 11

Tips 94

Troubleshooting 95

Philips Authentic Accessories 99

Trademark Declaration 102

Specific Absorption Rate Information 103

Limited Warranty 105

Declaration of Conformity 109

12 Getting Started

1 Getting Started

Congratulations on your purchase and welcome to Philips!

To get the most of your product and enjoy all Philips has to offer, register your product at www. philips. com/welcome.

Please read the safety instructions in the "Precautions" section before use.

To use your phone, you must insert a valid SIM card supplied by your GSM operator or retailer. The SIM card contains your subscription information, your mobile telephone number, and a memory in which you can store phone numbers and messages.

Insert the SIM card

Follow the steps below to insert your new SIM card. Remember to switch off your mobile phone before removing the back cover.

Press on the back cover and slide the cover as shown.

Getting Started 13

As shown, take out the battery.

You may lose all your personal settings if you remove the battery when the phone is switched on.

As shown, align your SIM card with the SIM card slot, clipped corner facing you and gold

contact downwards. Insert your SIM card under the metal clip holder.

Figure 1

Figure 2

14 Getting Started

As shown, align the metallic connectors on the battery and battery slot. Press the battery down until it is locked.

As shown, slide the back cover along the slots until it is locked.

Remove the protective film covering the screen and camera lens before using the phone.

Charge the battery

Your phone is powered by a rechargeable battery. A new battery is partially charged. The battery symbol indicates the state of the battery.

To charge the battery, plug in the connector as shown below. Then plug the other end into a power socket.

During charging, the battery symbol scrolls.

Keeping the charger plugged to the mobile phone when the battery is fully charged will not

Getting Started 15

damage the battery. The only way to turn off the charger is to unplug it, so it is advisable to use an easily accessible power socket.

If you do not intend to use your phone for several days, we recommend that you remove the battery.

You can use the phone while it is charging. If the phone is extremely low on power, the low battery images will only appear after a few minutes of charging.

Set clock

Check that your phone is switched on. Long

press the power on/off key ) if

necessary. Enter the PIN code if required. A PIN code is a 4- to 8-digit secret code of your SIM card. It is preconfigured and communicated to you by your network operator or retailer.

If you enter an incorrect PIN code three times in succession, your SIM card will be blocked. To unblock it, you must request the PUK code from your operator.

On the idle screen, tap on and go to

Settings > General > Time & date. Set format: Select the time (12-hour or 24-

hour clock) and date format by tapping the desired options, and or .

Set time / Set date: Enter the time and date.

Tap on the box to be defined. To enter your desired digits, tap or repeatedly, or long press or until you reach the desired digits.

To select how to display the time, go to

Settings > General > Time & date > Display time: Analog: Tap to show the time in a clock. Digital: Tap to show the time in digits.

Ta p OK to confirm.

16 Getting Started

To show the clock display on idle screen, slide the bar below displays (see "Switch between different displays" on page 5).

Display local and international clocks

You can display two clocks on the idle screen, one showing your local time and one the time of your destination.

Check that you have set your local time and date.

Go to Tools > World clock.

Local setting/Foreign setting: Tap or

repeatedly to select a city. If necessary, tap

Options to turn Daylight saving/Daylight saving for foreign city on or off.

Check that you have set world clock as your functional display on the idle screen (see "Functional displays" on page 5).

Insert a micro-SD card (memory card)

You can expand the memory of your phone by adding a micro-SD card.

Storage capacity: up to 8 GB

Follow Step 1 and 2 under “Insert the SIM card”.

As shown, push down the card holder and lift it up. Align your micro-SD card with the slot. Put it in place.

Press down the card holder and pull it until it is locked.

Text entry 17

2 Text entry

Your mobile phone supports text entry through the on-screen Qwerty keypad, on-screen alphanumeric keypad, or the supplied stylus (handwriting format).

Using the Qwerty keypad

Select text entry modes

• On the editing screen, turn your phone, if in the vertical position, counterclockwise by 90 degrees. Check that you are in an input mode other than or .

Enter text

Tap t o s e l e c t

: for English entry :Pinyin input for Simplified

Chinese

: for numeric entry

Depending on the language you select for your phone, the supported input formats may vary.

Tap on the keys to enter your desired letters or numbers.

: Tap to move to the beginning of the

next line.

: Tap to delete the previous character.

: Tap to enter a space.

:Tap to enter symbols and

punctuations. Tap again to exit.

/ : Tap to switch between upper and

lower cases (for English entry).

Tap on Done to complete editing.

18 Text entry

Using the supplied stylus (the handwriting format)

Select text entry modes

On the editing screen, turn your phone, if in the horizontal position, clockwise by 90 degrees.

If necessary, tap on to select

: text entry through the supplied stylus

(handwriting format)

Enter text

Tap t o s e le c t

: for English entry : for the entry of Simplified

Chinese

: for the entry of Traditional

Chinese

: for numeric entry

Depending on the language you select for your phone, the supported input methods may vary.

Write on the screen using the supplied stylus, as you do on paper using a pen.

: Tap to move to the beginning of the

next line.

: Tap to enter a space.

: Tap to enter symbols and

punctuations. Tap again to exit.

Using the alphanumeric keypad

Select text entry modes

Follow Step 1 under "Using the supplied stylus (the handwriting format)".

If necessary, tap on to select

: text entry through the alphanumeric

keypad

Enter text

Tap to select, or repeatedly press ,

/ / / : for English

entry

: stroke input for Traditional

Text entry 19

Chinese

: Pinyin input for Simplified

Chinese

: for numeric entry

- Long press to turn T9 input on or off (for suitable input formats only).

- To set preferred input formats, long press

. On the screen, you will only find

the icons for preferred input formats.

Depending on the language you select for your phone, the supported input formats may vary.

Tap on the keys to enter your desired letters, numbers, or strokes.

to Tap to input letters (T9 input)

Tap repeatedly to input the desired

letter (multi-tap input)

to Tap to enter strokes (stroke

input)

/ Tap to browse candidate words

on the previous/next page.

Tap to input symbols and punctuations

Tap to input a space

Clear

Short press to clear a letter, long press to clear all entries. If necessary, tap on Clear to exit the input mode first.

- Tap on a candidate word or

Select

select.

- To move to the beginning of the next line, tap on and select .

If necessary, tap on Clear to exit the input mode.

T9® input

T9® predictive text input is an intelligent editing mode for messages, which includes a comprehensive dictionary. It allows you to quickly enter text.

You need to press only once on the key corresponding to each letter needed to spell a word: keystrokes input are analyzed and

Tegic Euro. Pat.

App. 0842463

20 Text entry

the word suggested by T9® is displayed at the pop-up window.

Examples: how to enter the word "home":

Tap on , , , . The screen displays a list of candidate words.

Tap to select “home”.

Multi-tap input (ABC/abc)

Press the keys that are marked with the corresponding letter you wish to enter. Press once to get the first letter on the key, press twice quickly to get the second letter and so on until the letter you want is displayed on the screen.

Example: how to enter the word "home":

Press , (GHI) , , (MNO), (MNO), , (DEF).

Stroke input

The principle of stroke input is to dissect and separate every stroke of a Chinese character according to sequence. When you wish to input the character, press the keys corresponding to the required strokes according to sequence to get the desired character. The stroke input method in this phone classifies a Chinese character into 5 basic strokes: (horizontal, vertical, left falling stroke, right falling stroke and over-down) as well as a special stroke. When the stroke you need does not correspond to the 5 basic strokes, replace it with the special stroke ( ).

Calling 21

3 Calling

Making calls

From the idle screen

Tap on to enter the phone number. An on-screen dial pad appears.

Press A

to dial the number.

If you want to dial the number by using secondary SIM, tap Options >

Dial(Secondary SIM).

Press B to hang up.

For international calls, long press on the dial pad to enter "+" (the international prefix).

Use the phonebook (see "Contacts" on page 37)

On the idle screen, tap on . To search for a contact, tap on

beside the text box. Enter

the contact name (up to 5 characters). Tap on the input method icon to select.

Press A to dial the selected number.

If you want to dial the number by using secondary SIM, tap Options >

Call(Secondary SIM).

Press Bto hang up.

Quick call

On the idle screen, by using the functional display of quick call, you can call a preset contact just with a long tap on the contact icon. Set your quick-call list before making such a call.

To set your quick-call list

Go to > Settings > Dashboard (see "Functional displays" on page 5).

Select Quick call, and tap to turn it on. The functional display of quick call will appear on the idle screen.

Press B to return to the idle screen. To

select the quick-call display, if necessary,

22 Calling

slide the bar below displays (see "Switch between different displays" on page 5).

Tap on an empty contact icon, and select your desired one from the phonebook. On the quick-call display, the contact name appears below the icon. For those with contact pictures (see "Add a contact to Smart Phonebook" on page 37), the associated picture also appears.

To replace a contact in the quick-call dashboard

Go to Settings > General > Quick call

dashboard.

Tap to select the contact to be replaced.

Tap on Options > Replace to replace the contact with your desired one from the phonebook.

Speed dial

On the idle screen, tap on , and you can call a preset speed-dial number by long pressing a numeric key.

Set your speed-dial number before dialing it.

To assign a speed-dial key to a contact or phone number,

Go to > Settings > General > Speed dial.

Select one of the locations ( to ). Tap on Add.

In Contacts, assign to the location a contact from your phonebook. In Phone number, assign to the location a preset phone number.

Answering and ending a call

When you receive a call, the number of the caller may be displayed, depending on whether or not the caller has chosen to display his or her ID. If the number is stored in the phonebook, then the corresponding name is displayed.

• Answer the call: Press A, or tap on

Answer.

• Hang up: Press B.

Calling 23

•

To answer or end a call using the supplied one-key headset,

see "Headset" on page 99.

•

To reject calls from certain contacts

, you can add the contacts or numbers to your blacklist. (For more information about the blacklist, see "Firewall" on page 48).

The phone will not ring or vibrate if it is in Silent mode (see "Profiles" on page 78).

Options during a call

During a call, you can tap to select H-Free or H-

Held mode. Tap on Keypad to use the on-screen

dial pad. Tap on Options to access the following options:

- Contacts: Select or edit contacts in the phonebook.

- Hold: Put current call on hold.

- End call: End current call.

- Sound recorder: Record conversation

during a call.

- Mute: Mute/unmute the call.

- Messaging: Send and receive messages.

- Calendar: Check your calendar (see

"Check your calendar" on page 43) during a call.

- Quick note: Edit a text memo to be shown on the idle screen.

- Calculator: Use the calculator (see "Calculator" on page 49) during a call.

Sound recorder

In most countries, recording of telephone conversation is subject to legislation. We advise you to notify the caller if you intend to record the conversation and only do so if they agree. You should also ensure confidentiality of the recordings.

To record a conversation during a call, tap on

Options and select Sound recorder. Recorded

sound is saved in *.amr format and stored in Audio of My files menu (see "Finding your files" on page

70).

24 Calling

Mute or unmute a call

During a call, tap on

Options

and select to set the

Mute

function to On or

Off

. If you select

Mute On

the microphone will be deactivated.

Adjust the volume

During a call, press the side volume key + or - to increase or decrease the volume.

Handling multiple calls (Networkdependent)

You can handle two or more calls at the same time, as well as make conference calls with your phone. The availability of this feature is dependent on your network operator and/or your subscription.

Make a second call

You can make a second call when there is an active call or a call on hold. While on the phone, tap on Options > Contacts or Keypad to select a

contact or enter a phone number, and then

press A. The first call is put on hold and the

second number is dialed. When the second call is received, you can tap on Swap to toggle between 2 calls, or select Options to access the following options:

• Contacts to select or edit contacts in the phonebook.

• H-Free to receive the call in handsfree or handheld way.

• Conference to introduce the party into conference call.

• Transfer to connect the two calls. You are disconnected when the transfer is completed.

• End call to disconnect one party from the call.

• End all calls to disconnect all parties from the call.

• Sound recorder to record the phone conversation.

• Mute to deactivate the microphone.

• Messaging to send or receive messages

Calling 25

• Calendar to check your calendar (see "Check your calendar" on page 43) during a call.

• Quick note: Edit a text memo to be shown on the idle screen.

• Calculator to use the calculator (see "Calculator" on page 49) during a call.

Answer a second call

When you receive a second call while already in communication, the phone screen displays information about the incoming call. You can then:

To receive a second call, you must first deactivate Call divert (see 74) and activate Call waiting (see 74).

Making an emergency call

Without a SIM card in phone, you can tap on

SOS to make the emergency call.

With a SIM card in phone, you can tap on to enter the emergency number in idle mode,

then press A.

In Europe, the standard emergency number is 112, in the UK, it is 999.

Press A or tap

on Answer

To answer the call (the first one is put on hold).

Press B or tap

on Options >

Reject

To reject the call.

26 Messaging

4 Messaging

Creating messages

SMS

SMS enables you to send text messages to the other party, using Short Messaging Service (SMS). You can use the Create SMS menu to send messages to another handphone or a device that is capable of receiving SMS. To compose and send an SMS, follow the steps below:

Tap on on the idle screen, or go to

Messaging. Select SMS > Create SMS, and

write your message.

Tap on Options to access the following options:

Ta p o n Send to send the message to the desired contact or contact group (see "Contacts" on page 37).

MMS

Your mobile phone can also send and receive MMS (Multimedia Messaging Service) messages. With MMS, you can send messages that contain pictures, sound and text.

Save as Draft (Primary card)/(Secondary

card): Save the SMS message to Drafts of SIM 1 and SIM 2. Template: Save the SMS message

as an SMS template.

Insert contact Select to insert the name and

phone number of your contacts.

Use templates

Select to insert a preset message.

Exit editor Exit the editing screen.

Messaging 27

When sending MMS messages, make sure that your recipient also has an MMS-enabled phone in order to view your messages. Follow the steps described below to compose and send an MMS.

Select MMS >Create MMS, and enter the following：

In Edit content, tap on Options to select your options.

To insert multimedia slides, select

To insert file attachment, select

To Enter the number or e-mail of the

recipient.

Cc Enter the number or e-mail of other

recipients to whom you wish to send a copy of the message.

Bcc Enter the number or e-mail of the

recipients to whom you wish to send a copy of the message, by which the recipients in the Bcc list will be invisible to other recipients.

Subject Enter the subject of the MMS.

Add picture, Add audio, Add video

Insert a slide into your message. The multimedia slide can consist of a picture and an audio file, or a video clip.

Add slide before, Add slide after

Insert more slides into your message.

Slide timing Set the play time of MMS slides.

The default value is 5 seconds.

Preview Preview inserted multimedia

slides. Tap on and to move to previous or next page.

Add attachment

Insert a file attachment to your message.

28 Messaging

To insert Bookmark text, select

Tap on Done to access the next option:

Use templates for messages

You can use ready-made messages as new messages. 10 SMS and 5 MMS messages are preset in the Templates folder.

Select SMS > Templates or MMS >

Templates.

Select your desired templates.

Tap on Options, and select Write message or

Create message.

The ready-made message appears on the edit screen.

Sending messages from idle screen

By tapping the functional display of Messaging on the idle screen, you can quickly send messages to 3 contacts/numbers you recently used to send messages.

On the idle screen, select your desired functional display (see "Functional displays" on page 5).

Add bookmark text

Add to your message the website information you saved as a bookmark (see "Accessing web sites" on page 49).

Send only Send the MMS message only.

Save and send

Save and send the MMS message.

Save to Drafts

Save the MMS message to Drafts.

Send options

Set Validity period, Delivery report, Read report, Priority.

Exit Exit the editing screen.

Messaging 29

Tap to select the contact or number as the recipient of your message.

Write and send your messages (see "Creating messages" on page 26).

Organizing your messages

Your messages are sorted in the following folders on your phone memory and SIM card:

Inbox: received messages Sent: sent messages Outbox: unsuccessfully sent messages Drafts: messages saved as drafts Spam box: rejected or filtered messages

Find a message

• Tap to enter a folder, and then, select a message.

Manage messages

• Open a message, and then, tap on Options to access the following options:

For the SMS or MMS, or different folders, available options may vary.

Reply Reply to the sender.

Reply by SMS

Reply to the MMS sender by SMS.

Reply all Reply to the MMS sender and all

recipients on the Cc and Bcc lists.

Forward Forward the selected message.

Edit Edit and send the selected message.

Edit before calling

Edit the sender’s phone number before making a call

Use details, Use number, Use URL

Extract the number or E-mail address of the sender or in the message to create messages, make a call, or save to the phonebook.

Extract the URL in the message to connect to the website, or add as a bookmark.

30 Messaging

Defining your message settings

Some of your message settings are dependent on the service you subscribe with the network operator. Consult your network operator for

your account settings, general settings, server profile, or other relevant settings.

In SMS > SMS Settings, tap SMS1 message settings or SMS2 message settings:

Delete Delete the selected message.

Delete all Delete all messages in the folder.

Multi Select

Select multiple messages to be deleted. Tap on Select or Cancel to select messages. To delete selected messages, select Done > Delete.

Move to SIM

Move current SMS message to the SIM card.

Save object Save to your phone or memory

card (if inserted) attached files of current MMS message.

Properties Show the file information of

current message.

Account settings

Profile name: Edit the name of the

current profile.

SC address: Select your default

SMS center. If not available on your SIM card, you must enter your SMS center number.

Validity period: Select the length of

time your messages will be stored in the SMS centre. This is useful when the recipient is not connected to the network (and thus cannot receive your message immediately).

This feature is subscription dependent.

Messaging 31

Message type: Select the format of

your sent messages. This option is network dependent.

General settings

Delivery report: When selected,

this option will inform you via the SMS whether or not your own SMS message was sent.

This feature is subscription dependent.

Reply path: When selected, this

option allows you to transmit the number of your SMS message center together with the message. The recipient can then reply using your SMS center and not theirs. This speeds up the rate of transmission. This feature is subscription dependent.

Auto save SMS: Tap to select

On: The message is sent and

saved to the Sent folder.

Off: The message is sent only.

Memory status

This option can display the memory status of the messages saved in the SIM card and the phone.

Preferred storage

This option allows you to select the preferred storage. You can select SIM or Phone.

32 Messaging

In MMS > MMS Settings,

E-mail

To send and receive E-mail, you need to subscribe relevant services. Contact the operator for the subscription and configuration information.

This menu allows you to send E-mail to one or several recipients at a time, including with an attachment (smaller than 200K in size) such as a JPEG picture. Once received, your messages can be forwarded and the attachments can be visualized with the appropriate software.

Set up E-mail accounts

Select E-mail > E-mail accounts.This menu allows you to create new E-mail accounts and select

Compose Set Creation mode, Picture resizing,

Best page time, Auto signature and Signature. When Auto signature is

set to On, edit your signature in

Signature.

Send Set Validity period, Delivery report,

Read report, Priority, Slide timing and Delivery time options for sending an

MMS message.

Retrieve Set Home network, Roaming, Read

report and Delivery report options

for receiving an MMS message.

Filter Set Anonymous, and Advertisement

from whom you want to filter MMS or E-mail messages.

Server profile

Set network configuration. Please contact your network provider for more information.

Memory status

View the memory status of your MMS messages.

Messaging 33

one to activate it. Consult the network operator for the account information. If necessary, consult your mail service provider for the mail server configuration.

Go to E-mail > E-mail accounts. Tap on Add or Options > New account to set up a new account.

Enter your account information as prompted.

- When entering symbols like @ and _, tap on or to turn on/ off the symbol input keypad.

- When selecting data account, tap on Edit and select GPRS data. Check that you have selected a GPRS Internet/Email connection account.

- Consult your mail service provider for the mail server configuration.

When returning to the list of E-mail accounts, tap on Activate to activate the selected E-mail account.

Write E-mail

To write E-mail, select E-mail > Write Email. Tap to enter the address (To), a copy (Cc), a blind copy (Bcc), subject, and the E-mail content. By tapping Attachments, you can attach up to three files. When you have finished writing your Email, press

Done

. You can then select to Send,

Send and save, Save to draft or Quit without Saving.

Send and receive E-mail

Select E-mail > Send and receive. This menu allows you to send E-mail from your phone to the Internet, and receive E-mail from the Internet to the mailbox you have preset on your phone.

To receive E-mail automatically

Go to E-mail > E-mail accounts. Tap to select your desired account.

Tap on Options, and select Edit > Advance.

In Account settings > Check interval, tap or

to select your desired time span.

34 Messaging

Your mail box will be checked automatically after each time span.

If authentication is required for outgoing mail

Go to E-mail > E-mail accounts. Tap to select your desired account.

Tap on Options, and select Edit > Advance >

Outgoing server. Check that you have

selected On (by default) in Authentication.

Organize your E-mail

For your activated account, the Email is sorted in the following folders:

Inbox: received E-mail Outbox: unsuccessfully sent E-mail Sent: sent E-mail Drafts: Email saved as drafts

Go to E-mail > E-mail accounts. Tap to select your desired account. Tap on Activate to activate the E-mail account.

Enter a folder and select a desired message. Tap on View to read the mail. When reading

the mail, tap on Options to access the following options:

For different folders, available options may vary.

Reply Reply to the senders.

Reply without content

Reply to the sender without the email history.

Reply all Reply to all senders.

Reply all without content

Reply to all senders without the email history.

Forward Forward the E-mail to someone

else.

Messaging 35

To delete marked Emails

By tapping on E-mail > Delete marked Emails, you can delete all the mail marked as deleted.

To clear mailboxes

By tapping on E-mail > Clear mailbox, you can empty a folder, like Inbox, Outbox, Sent,

Drafts, or all mailboxes.

Broadcast messages

Broadcast messages are public messages broadcast to a group of mobile users. The messages are broadcast on coded channels. Generally, one broadcast channel can transmit one type of message. Please contact your network operator for a list of channel numbers and their respective broadcast information.

Define settings for broadcast messages

In Broadcast messages, select SIM1 broadcasting

message or SIM2 broadcasting message:

Retrieve options

Retrieve the complete mail.

This option is available when you select Incoming server >

Downloaded options > Header only

in Edit > Advance (see Step 1 and 2 under see "To receive E-mail automatically" on page 33).

Mark as unread

Display current E-mail as unread.

Mark as deleted

Display current E-mail as deleted.

Delete Delete current E-mail.

Receive mode

Tap to turn the receive mode on or off.

Read message

Read messages when there are received broadcast messages.

Languages Set language for the broadcast

message to be received.

36 Messaging

Channel settings

Define the channel for broadcast messages

Contacts 37

5 Contacts

Contacts are stored in one of the two available phonebooks: SIM phonebook (located on your SIM card, by which the number of entries you can store depends on the card capacity) or the Smart Phonebook (located on your phone, which allows you to store up to 1000 names). New contacts will only be added to the phonebook you have selected.

Adding or editing contacts

Add a contact to Smart Phonebook

For contacts on the Smart Phonebook, you can add detailed information, like home number and office number, and identifying features, like contact pictures and ringtones.

Go to Contacts > Advanced: In Contact details, select the items to be defined for a new contact.

On the idle screen, tap on and enter the phone number you wish to save.

Tap on Save and choose storage SaveTo

phone. Name: Tap on Edit to go to the editing

screen. Select your desired text entry formats (see "Text entry" on page 17). Tap on Clear to exit the input mode, if necessary.

Number: Enter the mobile number.

Add details as desired in other fields. When selecting the contact picture, ringtone or caller group, tap on or (To use a photo as contact picture, see "Use a picture file as contact picture" on page 72).

Tap on Done to save.

38 Contacts

Add a contact to SIM phonebook

On the idle screen, tap on and enter the phone number you wish to save.

Tap on Save and choose storage To SIM1 or

To SIM2.

Follow Step 3 under “Add a contact to Smart Phonebook”.

Edit a contact

Go to Contacts > View contacts.

Select your desired contact (see see "Searching for a contact").

Tap on Options > Edit to go to the editing options. For contacts on SIM phonebook, only name and mobile number are editable.

Searching for a contact

Go to Contact > View contacts.

There are 4 pages on top of phonebook list: all contacts, phone contacts, SIM1 contacts and SIM2 contacts.

Select your desired page of contacts.

To search for a contact, tap on

, and enter the name (up to

5 characters) using the on-screen keypad.

- To search contacts by any character in a name, turn on Smart search in Contacts >

Advanced.

Names containing the character are listed.

- To search contacts by first characters in a name, turn off Smart search in Contacts >

Advanced.

Names starting with the character are listed.

Or, move up or down the slider on the right. Initials (English or phonetic letter) appear for current names in an ascending or descending order.

Contacts 39

Managing your contacts

You can copy or move your contact entries among the three phonebooks. Also, you can group your contacts as Family, Friends, Business and others as you like. For different groups, you can use different ringtones for identification, and send messages to a group.

Copy, move or delete a contact

Go to Contacts > View contacts. Select your desired page of contacts.

Select a desired contact (see see "Searching for a contact").

Tap on Options to select Delete, Copy to, or Move to

Copy, move or delete multiple contacts

Go to Contacts > View contacts. Select your desired page of contacts.

Select a desired contact. see "Searching for a contact".

Tap on Options > Select multiple. Select

Select all or Select one by one to display a fully

checked or unchecked contacts list.

Ta p to check or uncheck your selection.

Tap on Options > Copy to phone/SIM1 or

SIM2, Move to phone/SIM1 or SIM2, or Delete.

Copy, move or delete all contacts

Go to Contacts > Advanced.

Select Copy all, Move all, or Delete all

contacts.

Group your contacts on the Smart Phonebook

Go to Contacts > View groups.

Select a group. You can rename the group, select a ringtone and a contact picture, and add contacts to Member list.

40 Contacts

Sharing contact information with others

You can share with others the contact information in your phonebook. As desired, the information can be sent via the SMS, MMS, Email or Bluetooth.

In Contact > View contacts, select your desired page of contacts.

Select a desired contact (see see "Searching for a contact").

Tap on Options > Send contact to send the contact information via the SMS, MMS, Email or Bluetooth.

Backing up important contacts

You can save the information of important contacts as files in your phone or memory card. To back up your entire phonebooks, see "Back up your phonebook" on page 48.

In Contact > View contacts, select your desired page of contacts.

Select your desired contact. (see see "Searching for a contact").

Tap on Options, and select Send contact >

Save as file.

- Select your desired backup location, phone or memory card.

- Select your desired folder where the backup information is to be stored. To create a sub-folder, tap on Create, or

Options > New folder.

Tap on Done, and name backup file. The backup file is created.

To restore the contact to your phonebook

Go to My files. Find and select the contact information file (.vcf) you saved.

Tap on Options > Use to restore the contact to your desired phonebook.

Contacts 41

Special numbers

This menu allows you to keep a list of useful numbers such as own numbers, service numbers, voicemail and emergency numbers.

Options Description

My numbers

Tap on Edit to edit the phone number or name to be shown on the idle screen.

Emergency Tap on Edit to edit your

emergency phone number.

Voice mail This menu allows you to set your

voice mail server number, as well as retrieve your voice mails. Consult the network operator for the account information.

Select a voice mail box, and tap on Edit: Edit voice mail server number.

Connect: Retrieve your voice mail.

Service numbers

This service is provided by your network operator. For more information regarding the corresponding function, please contact your network operator.

42 Tools

6 Tools

Using your business organizer

You can add your new tasks to the phone. Such to-do tasks are marked in your calender. You can always check your calendar and remind yourself as desired.

Create your to-do list

In Tools > Calendar, select a date in the calendar, and tap on Tasks to add a kind of task. You can also add a task by tapping Options >

Add event.

To create or edit the to-do list of current date, you can tap the functional display of calendar on the idle screen (see "Functional displays" on page 5).

To keep yourself reminded, do the following:

Tap on Done to save the task.

Subject Add a note about the task.

Tap on Edit to edit the task. On the editing screen, tap on Template to use the preset note.

Alarm Tap on or once or more to

turn the alarm on, have it sound 5, 15 or 30 minutes before the specified time, or turn the alarm off.

Repeat Tap on or once or more to

repeat the alarm at the specified time once, everyday, weekly or monthly.

To repeat the alarm at certain days, tap on or to select Days, tap on a weekday or weekend, and then On/Off to select or unselect the day.

Tools 43

At the set time, the new event icon appears on the idle screen.

Check your calendar

After creating your to-do lists, you can check your calendar in weekly, or monthly views. In

Tools > Calendar, tap on Options > Go to monthly/ weekly view to switch between the views.

You can also create your to-do list in the calendar of different views.

To view the to-do list of current date

• Select your desired date. Tap on Tasks.

To view all to-do lists

• Tap on Options > View all.

Edit your to-do list

Go to your desired to-do list (see “Check your calendar”).

Select your desired task. Tap on Options to do the following:

Delete expired tasks

You can quickly delete all tasks before current date and time.

•In Tools > Calendar, tap on Options > Delete

expired tasks.

Using your memo

You can use this phone to record your text or sound memos.

Display a text memo on the idle screen

You can save up to 5 text memos, and display them on the idle screen.

Add Add a task.

Edit Edit the selected task.

Delete Delete the selected task.

Delete all Delete all the tasks.

Send vCalendar

Send the task as a message.

44 Tools

In Tools > Quick note, tap on Edit. Or, tap on the functional display of Quick notes on idle screen. You can write a text memo, or draw an image as desired on the page.

To turn over a page, drag to lift its lower right corner.

Tap on Save to finish editing. On the idle screen, you can see the text memo pages.

To delete an existing page

•In Tools > Quick note, select your desired page (if necessary, turn over a page by dragging to lift its lower right corner). Tap on Delete.

Record a sound memo

You can make your own recording, and share it with your friends via the MMS, E-mail, or Bluetooth. Also, you can use the recording as the ringtone of incoming calls or a contact.

Make recording

Go to Tools > Sound recorder. To select your storage location, file format, and audio quality, tap on Options > Settings to select your options.

Tap on Record or Options > Record to start recording.

Tap on Stop to stop recording. A file name is generated.

Edit the file name as desired. The recording file is saved to My files >

Audio.

Append recording to a file

Select the desired file.

Tap on Options > Append. The new recording is added to the file.

Edit recording files

Select the desired file.

Tap on Options to select Rename, Delete, or

Delete all files.

Send an audio file

Select the desired file.

Tools 45

Tap on Options > Send to send the audio file via the MMS, E-mail, or Bluetooth.

Set your recording as a ringtone

Select the desired file.

Tap o n Options > Set as ringtone.

The recording is added to your ringtone file list.

The ringtone of your incoming calls is changed to the recording. To change the ringtone, see "Sounds" on page 83. To use the ringtone for contacts, see "Adding or editing contacts" on page 37 or see "Group your contacts on the Smart Phonebook" on page 39.

Using your clock and timer

Alarm

You can set up to five alarms.

To set an alarm

Check that your clock is correctly set (see "Set clock" on page 15).

Go to Tools > Alarm. The screen of alarm list appears.

Select an alarm, and tap on Edit to enter the alarm setting screen.

Time: Set the alarm time. Repetition: Repeat the alarm on one or some

of the weekdays or weekends. Tap to select your option. Tap on Done to finish setting.

Alarm tone: Tap to select an alarm tone. Snooze: Select an alarm interval: 5, 10, or 20

minutes.

Alert type: Select how the alarm sounds at

the set time.

Tap on Done when you finish setting the alarm.

To turn off an alarm, tap on an alarm, and then Off.

To use an alarm

At the set alarm time, your alarm rings or vibrates, depending on the alert type you have selected (see “To set an alarm”). Select Stop: The alarm stops. If you have selected repeat mode for the alarm (see “To set an alarm”), it will sound again at the set time.

46 Tools

Select Snooze: The alarm will sound again after the set Snooze interval.

To mute the sounding alarm, you can also turn over the phone (front side to the back, back side to the front, see "Sensor" on page 6).

The alarm clock will ring or vibrate, even if your mobile phone is switched off, or the Profiles is set to Meeting or Silent.

World cloc k

You can display two clocks on the idle screen, one showing your local time, and one the time of your destination.

Check that you have set your local time and date.

Go to Tools > World clock.

Local setting/Foreign setting: Tap or

repeatedly to select a city. If necessary, tap

Options

to turn

Daylight saving/Daylight saving

for foreign city

on or off.

Switch local/foreign: Ta p to switch between

local and foreign clock.

Alarms, reminders, programmed events are time zone independent! If you set an alarm or an event at 9:00 AM in time zone A, it will still ring or be due at 9:00 AM if you change to time zone B.

Stopwatch

Use the stopwatch for your timing needs. In Tools > Stopwatch,

•Tap on Start to start timing.

•Tap on Pause/Continue to pause or resume.

• Tap on Restart to reset the timer.

• Tap on Back to exit.

Text reader

This menu allows you to view text files (.txt file) saved on your phone or memory card. To view a file through the text reader,

Tools 47

Copy and save the file to My files > Phone or

Memory card > Others > Ebook.

Go to Tools > Text reader. Tap on Options >

Global settings > Select storage to select the

storage location: phone or memory card, if you have inserted a memory card into your phone. Existing files are listed in the Bookshelf screen.

To display a file correctly, open it and tap on

Options > Global settings > Encoding. Select

the encoding suitable to your language.

To search for information when viewing a file

You can search for specific words, marked information, or different parts of the file. After opening the file, tap on Options to select:

• Find: Find specific words in the file.

• Go to bookmark: Go to the marked information. To do so, add a bookmark where desired by tapping Options > Add bookmark.

• Jump to: Go to the beginning, middle, or end of the file. To skip a certain percentage of the file, select Input percentage and tap on Edit to enter your desired percentage number.

To clear the files created by the system during E-book reading

• Go to Tools > Text reader. In the screen of file list, tap on Options > Cleanup bookshelf.

Using the torch

On the back of the phone, a torch function is equipped, which you can also use as the flash for camera. To turn on the torch,

•Select Tools > Torch. Tap on On.

• To turn on the torch from idle screen, drag

48 Tools

Using your business assistant

Back up your phonebook

You can back up all your contact information stored in phonebooks, and restore such information when necessary.

To back up your phonebook

Go to Tools > Phonebook backup, and select

Back-up to memory.

- Select your desired backup location, phone or memory card.

- Select your desired folder where the backup file is to be stored. To create a sub-folder, tap on Create or

Options > New folder.

Tap on Done, and name backup file. The backup starts.

To restore the backup phonebook

Go to Tools > Phonebook backup, and select

Restore from memory.

Select the backup file. Tap on OK. The contact information is restored to where it is.

Firewall

Use the firewall to reject the incoming calls or messages from those included in the blacklist.

Mode: Turn the firewall mode on or off.

Black list numbers: Edit a list of phone numbers.

You can reject all the calls or messages from such numbers.

To a d d a phone number from your phonebook

Go to Contacts > View contacts. Select your desired page of contacts.

Select your desired contact from the list.

Tap on Options, and select Add to blacklist.

Tools 49

To change the type of firewall

You can use the firewall to reject incoming calls only, incoming SMS messages only, or both incoming calls and SMS messages.

Go to Tools > Firewall > Black list numbers. The black list of contacts and numbers appear.

Tap to select a contact or number. Tap on

Options > change type.

Current type is highlighted.

Tap to select the desired type. Tap on Select to confirm.

Calculator

Enter figures and operation symbols by using the the on-screen numeric keypad.

Currency converter

Convert between different currencies based on exchange rates.

In Tools > Currency converter, enter your exchange rate in Rate. Tap on Done to confirm.

In Rate, if necessary, press or to switch foreign versus local currency to local versus foreign currency.

Enter the sum of money in Local. Tap on

Done.

You will get the result in Foreign.

The result of the calculator is indicative only. The calculation accuracy is 10 decimal places. The result is then truncated after the 10th decimal digit for the next operation.

50 Browser

7 Browser

You can use this function to browse the Internet. Consult your network operator for the service subscription, data account information, and WAP settings.

Managing your browser

In Browser >

Settings,

Edit account: Define or select your Internet

access settings.

Browser options: Define the time for an access

attempt, or choose whether to show images on web pages.

Clear cache, Clear cookies: Clear the history and

cookies of the browser.

Accessing web sites

You can access a web site in different ways:

Home: Access the homepage. Save your favorite

web site as the homepage.

Bookmarks: Access the web site saved as a

bookmark. By storing a website as bookmark, you can save and quickly access your favorite websites, and forward them in your messages (see "Add bookmark text" on page 28).

Enter address: Enter a web site address. History: Access a web site you visited before.

Select SIM: Select a SIM card to access Internet,

default is SIM1.

Or choose Always ask, always select SIM card before accessing Internet.

Enabling/disabling push messages

WAP push messages are specially formatted SMS messages that contain a URL. With such a URL, you can connect to a web site address

Browser 51

through the WAP browser of your phone. To enable or disable the function, go to Browser >

Settings > Service message settings.

STK

The availability of the features in this menu depends on whether or not your SIM card supports STK. If your SIM card supports STK function, the STK menu will be displayed on the screen.

52 Camera

8 Camera

Your mobile phone features a digital camera that allows you to take pictures (up to 5.0 Mega pixels) and record short video clips.

Camera

Take photos

To go to the camera mode from idle screen,

- long press the side camera key;

- or, tap on > Camera. Tap on to switch to the camera, if necessary.

To use the photo for different purposes, tap on to select settings:

- To send the photo via MMS or Email, check that VGA(640 x 480) is

selected in Image size and Normal in Adv.

settings > Image quality.

- To set the photo as contact picture (

see"Add a contact to Smart Phonebook" on page 37), check that Contact pictures is selected in Image size.

Press the side camera key gently to focus. A green square appears. Hold down the camera key until the auto focus is completed and picture captured.

Tap to select the camera mode

Press the side volume key to zoom in/out

Tap to select settings

Current image size

Tap to exit

Flash

ISO value

Camera 53

After a photo is taken

After a photo is taken, the photo is saved to My

files > Phone or Memory card > Pictures,

depending on the storage location you select in

> Adv. settings > Storage.

• Tap on to delete the photo.

• Tap on to set the photo as wallpaper.

• Tap on to send the photo via the MMS (for file size smaller than 100k), E-mail (for file size smaller than 200k), or Bluetooth.

• Tap on to exit and continue photographing.

Select settings

• Tap on to select settings. Press or to browse options. Tap an option to

select. Press to return to the previous menu.

• To restore default settings, tap on Adv. settings

> Restore.

To adjust settings to different scenes

•In Scene mode, select

- Auto: Automatic adjustment to scenes

- Portrait: Settings for portrait shooting

- Landscape: Settings for landscape shooting

54 Camera

- Night: Settings for shooting at night

- Sport: Settings for sports shooting. When the sport scene is selected, the auto focus range is set for panoramic shots automatically.

- Document: Settings for document shooting. When the document scene is selected, the auto focus range is set for close-up shots automatically.

- Anti-shake: Settings to detect vibration and keep steady shot.

To use optimal settings

•In Capture mode, select

- Best shot: for ideal exposure and clarity

•Select Face detection for ideal exposure and clarity of faces.

To easily adjust focus on off-center subjects

•In Adv. settings > AF zone, select Multi-zone.

5 viewfinders appear when you gently press the side camera key to focus. Move the lens to adjust focus areas in relation to the central one.

To shoot photos under insufficient brightness

• Use the flash. At the back of the phone, the built-in flash helps increase the brightness.

-In Flash, tap to select On.

- To use the flash when capturing faces, also select Red-eye reduction in Flash.

• Select a higher ISO value. However, high ISO values may cause noises in your photo, harming the sharpness.

-In ISO, tap to select a higher value.

To shoot photos with desired frames

•In Capture mode, select

- Add frame: to add a frame around to-becaptured subjects.

To take photos in a sequence

In Capture mode, select Continue shot.

appears on the screen.

Press the side camera key gently to focus. A green square appears. Hold down the camera key until the auto focus is completed and all pictures captured.

Camera 55

Photos are captured continuously until you release the press on the side camera key. All the photos are saved.

Or,

In Capture mode, select Burst shot sel..

appears on the screen.

Take photos as described in Step 3 under "Take photos". 3 photos are captured at a time. Thumbnails appear on the screen.

Select a photo. Tap on to save the selected photo; Tap on to send the photo via the MMS, E-mail, or Bluetooth (see Step 2 under “"Take photos" on page 52); Tap on to cancel the selection; Tap on to exit and continue photographing.

To take a close-up shot

Adjust the auto focus range to shoot subjects within a short distance.

•In AF range, tap to select Macro.

To take a panoramic shot

Adjust the auto focus range to shoot subjects in panoramic view.

•In AF range, tap to select Infinite.

To take photos for yourself

To take photos for yourself, you need time to point the lens to yourself after you select the view, and hold down the side camera key. To delay the shooting,

In Self-timer, select a time span. The selected time span appears on screen when you return to the photographing mode.

Take photos as described in Step 3 under "Take photos". Photographing will start after the set time span.

Turn over the phone (front side to back) to point the lens to yourself.

56 Camera

To take photos using different exposure values

At a time, 3 photos can be captured in different exposue values.

In Capture mode, select EV bracket sel..

Take photos as described in Step 3 under "Take photos". 3 photos are captured at a time. Thumbnails appears on the screen.

Select a photo. Tap on to save selected photos; Tap on to send it via the MMS, E-mail, or Bluetooth (see Step 2 under “"Take photos" on page 52); Tap on to cancel the selection; Tap on to exit and continue photographing.

Advanced light settings

• To select how to highlight different areas in a photo, tap on Adv. settings > AE meter.

• To avoid the impacts on photos caused by flickers from lighting sources, such as

fluorescent lamps, tap on Adv. settings >

Remove flicker. Select 50Hz if the AC power

supply is 220V, and 60Hz if 110V.

Color settings

• To remove the effects on colors by surroundings, tap on White balance to select the scenes similar to yours.

• To add effects, tap on Effects to select the your options.

• To increase or decrease contrast, tap on Adv.

settings > Contrast.

• To make colors more or less pronounced, tap on Adv. settings > Saturation.

• To sharpen or blur the borders between objects, tap on Adv. settings > Sharpness.

Other settings

• Select image size and quality as needed. Lower image quality may decrease the photo clarity, but reduce the file size. Set your desired value in Image size and Adv. settings >

Image quality.

Camera 57

- Contact pictures: for photos to be set as contact picture

- WQVGA (400 x 240) or higher: for photos to be zoomed in and set as fullscreen wallpaper

- VGA (640 x 480) size and Normal image quality: best resolution for photos sent via the MMS and E-mail

- 3M: for to-be-printed photos in postcard size

- 4M/5M: for to-be-printed photos in a larger size

• Display time on photos. Tap on Adv.

settings > Time stamp.

• Adjust the shutter sound in the time of shooting. Tap on Adv. settings > Shutter sound.

View photos

You can view photos in the camera, or, under

My files > Phone or Memory card > Pictures.

In the camera mode, tap on > View

pictures. Select your desired photo.

If necessary, tap on > Adv. settings >

Storage to select storage location.

To move to the previous or next

photo,

- On the screen, move your finger to the left or right;

- Or, tap on the screen to show the onscreen menu, if necessary. Tap or .

To zoom in or out the photo, If the photo is taken in a size equal to or greater than 400 x 240,

- Tap on the screen to show the on-screen menu, if necessary. Tap on the zoom icon

or .

- After zooming in a photo by tapping on

, slide the screen using your finger. You can browse the details on different portions of the photo. shows the position of current portion in the photo.

To view photos one by one

Go to My files > Phone or Memory card >

Pictures.

58 Camera

Select the photo you will start with. Tap on

Options > Slide show.

To select the playback settings, tap on

Settings: Type of play > Auto (Once): Play photos one

by one once and automatically.

Type of play > Auto (Repeat): Play photos one

by one repeatedly and automatically.

Type of play > Manual: Tap on / to

move to previous or next photo.

Speed: Select long or short interval between

photos.

Effect: Select the transition between two

photos.

Horizontal view > On: Show photos in

horizontal view.

Horizontal view > Off: Show photos in

vertical view.

Set photos as wallpaper

You can set a photo as wallpaper, or use the default wallpapers ( see"Wallpaper" on page 83).

Select your desired photo (see Step 1 under "View photos").

Tap on the screen to show the on-screen menu, if necessary. Tap on .

To set the photo as full-screen wallpaper

Tap on to zoom in the photo. Slide the bar in to select your desired portion. Tap on .

To save the full-screen wallpaper as another file, tap on the screen to show the onscreen menu, if necessary. Tap on .

Share and use photos

see"Sharing your files" on page 71, and see"Use a picture file as contact picture" on page 72.

Video recorder

Video recording

To go to the video mode from idle screen,

- long press the side camera key;

Camera 59

- or, tap on > Camera. Tap on to switch to the video, if necessary.

To set the video length, tap on > Record

limit.

- To send the video clip via MMS, select

Size 95 k, if you have selected 176 x 144

or 320 x 240 in > Record size.

Press and hold the side camera key until the video recording starts.

To stop recording, tap on , or press and hold the camera key.

To zoom in or out

• Press the side volume key (if you have selected 176 x 144 or 320 x 240 in >

Record size).

To keep adjusting focus during recording

• Tap on > Adv. settings > AF mode. Select

Cont. focus.

During the video recording, keep holding down the side camera key.

After a video clip is recorded

After a video clip is recorded, the recording is saved to My files > Phone or Memory card >

Videos, depending on the storage location you

select in > Adv. settings > Storage.

• Tap on to delete the video clip.

• Tap on to send the video clip via the MMS (for file size smaller than 100k), E-mail (for file size smaller than 200k), or Bluetooth.

• Tap on to exit and continue recording.

Select settings

• Tap on to select settings. Press or

to browse options. Tap an option to select. Press to return to the previous menu.

60 Camera

• To restore default settings, tap on Adv. settings > Restore.

To adjust settings to different scenes

•In Scene mode, select

- Auto: Automatic adjustment to scenes

- Night: Settings for shooting at night

To turn on/ off audio recording in the time of video recording

•In Adv. settings > Record audio, select On or Off.

To take a close-up shot

Adjust the auto focus range to shoot subjects within a short distance.

•In AF range, tap to select Macro.

To take a panoramic shot

Adjust the auto focus range to shoot subjects in panoramic view.

In AF range, tap to select Infinite.

To select video size or quality

• Select the video size according to the screen resolution. For ideal playback on this phone, select 640 x 480 in Record size.

• To select video quality, tap on Adv. settings >

Video quality. You can reduce the file size by

selecting a low video quality.

To set time or size limit to video clips

•In Record limit, tap to select your option.

Color settings

see"Color settings" on page 56.

To remove flickers during recording

• To avoid the impacts on photos caused by flickers from lighting sources, such as fluorescent lamps, tap on Adv. settings >

Remove flicker. Select 50Hz if the AC power

supply is 220V, and 60Hz if 110V.

Play video clips

Your video recording is saved to My files >

Phone or Memory card > Videos. To play a video

clip,

1. In the video mode, tap on > View

videos. Select your desired video clip.

If necessary, tap on > Adv. settings >

Storage to select storage location.

Camera 61

Tap on the screen to show the on-screen menu, if necessary.

/ : Tap to start or pause playback. : Tap to select playback speed.

: Tap to exit. : Tap to select your playback settings.

: Tap to capture a screenshot during video playback. All screenshots are saved as photos.

Share video clips

see"Sharing your files" on page 71.

62 Fun

9 Fun

Java

Your mobile phone features a Java run-time environment, which allows you to run Java applications, such as games downloaded from the network. The first time you launch Java, a message appears to alert you that the installation and configuration of Java will take several moments.

Install Java games and applications

You can download Java games and applications from the Internet to your phone via the WAP, or install them from PC via the supplied USB cable.

Consult your network operator for the services.

When installing games via a USB data cable, make sure that you save the .jar file under My

files > Others. Tap on Intall to start the

installation.

Run Java games and applications

Your phone is preloaded with some Java games and applications. Select your desired program, tap on Launch to start it.

To run some Java applications (untrusted third party software) on your phone, you may need to adjust the Java settings.

In Fun > Java, select the application to be launched.

Tap on Options > Settings, and select your option as needed:

Network access: permission to network

access

Auto invocation: permission to launch the

MIDlet automatically

Messaging: permission to send and receive

Fun 63

messages

Multimedia: permission to photographing, or

sound/video recording

Read user data: permission to read your

data, like contacts and calendar entries

Write user data: permission to write your

data

Local connectivity: permission to local

connectivity, like the Bluetooth connectivity.

Sensor games

In Fun > Sensor games, your phone is preloaded with some sensor games, for which you can use the built-in motion sensor.

In the games, to go to the left or right, you can move your phone in the direction.

64 Music

10 Music

Music player

Save MP3, WMA, AAC, AAC+, MIDI, WAV and AMR music files under the Audio folder on your phone or memory card. You can play the music on your phone.

Create your music library

Edit music files on your PC

Run Windows Media Player (or other music management program) on your PC.

To add music files, click Media Library on the left menu, and then click Add on the top menu.

On the left pane, select All Music. On the right pane, all the music files you added are displayed.

Click Title, Artist, Album to edit them as desired.

Operations may vary according to music management software or Windows Media Player versions. Consult the help file of the software.

Transfer music files from PC to your phone

Use the supplied USB data cable to connect your phone with the PC. Select Mass storage on your phone.

Copy the music files from the PC to the

Audio folder on your phone or memory card

(see "Insert the SIM card" on page 12).

Remove your phone (a USB mass storage device) from the PC safely.

On your phone, go to Music > Music player > Settings > Refresh list. All the music files are transferred.

Music 65

Play music

The music files are organized in two folders on the phone or memory card.

Tracks: all the songs on your phone. Artists: songs sorted by artist.

Play music files

If you have inserted a memory card on your phone, select your music source in Music >

Music player > Settings > Music source: Phone

or Memory card.

Select your desired song in a folder. You start playback from the song. On the playback screen, the file information and selected playback settings are displayed.

To select your plackback settings, tap on

Options: Set as ringtone: Set current song as the

ringtone of incoming calls.

Play in background: Continue to play music

after exiting the music player.

Turn off audio player: Exit the music player.

Add to playlist: Add current song to a

selected playlist.

Equaliser: Select sound settings suitable to

your songs.

Repeat: Select One to play current file

repeatedly; select All to play all the files in the folder repeatedly.

Shuffle > On: Play music files in the folder

randomly.

During playback (on the playback screen), If necessary, select Now playing on the Music

player screen to go to the playback screen.

/ : tap to start or pause playback.

/ : tap repeatedly to select a song. / : long tap for rewinding or fast

forwarding.

Back: tap to return to the previous menu.

- Press the side volume key to adjust the volume.

- Press B to go to the idle screen.

To continue to play music after exiting the music player

66 Music

• Go to Music > Music player > Settings > Play in

background, and select Ask first or Always.

To turn off the music player on the idle screen

• Press B, and then tap on Yes.

When listening to music, adjust the volume to a moderate level. Continuous exposure to high volume may impair your hearing.

Create playlists

You can create up to 10 playlists for songs that you wish to play at this time. Your last played songs are saved to

My playlists > Last

played

Select your desired song.

Tap on Options > Add to playlist. Existing playlists are displayed.

To create a new playlist, tap on Create or select

My playlists

> New playlist, and then assign a file name to the playlist. Repeat Step 1 and 2.

Select the playlist where you add the song. The song is added to the selected playlist.

Listen to music through a stereo Bluetooth headset

Check that your phone is connected to a stereo Bluetooth headset that supports A2DP profile (Bluetooth stereo output). For the Bluetooth connection, see "Connecting to a Bluetooth device" on page

75.

In Music >

Music

player > Settings > Bluetooth settings, BT stereo output: Tap on or to select On. BT stereo headset: Tap to select a connected

stereo Bluetooth headset.

Play your music files (see "Play music" on page 65).

Music 67

To play music through the loudspeaker again

Select Off in BT stereo output (see Step 2 in "Listen to music through a stereo Bluetooth headset").

Turn off the Bluetooth headset.

FM radio

Tune to a radio station

To tune to a radio station, always plug the supplied headset into your phone.

• Auto tune:

-In Music > FM radio, select Options > Auto

preset.

The radio frequency scanning starts automatically. Up to 20 available radio stations are saved to Channel. The first preset radio station starts to play.

Or,

-In Music > FM radio, press or to start the auto tuning to the next available station, if you have selected On in Options > Settings > Auto search.

• Manual tune:

-In Music > FM radio, select Options >

Manual input to enter your desired radio

frequency.

Or,

-In Music > FM radio, repeatedly long press

or to tune to a frequency, if you

have selected On in Options > Settings >

Auto search.

Edit the channel list

You can assign a preset to a certain location. In this way, you can quickly tune to the desired station.

In Music > FM radio, tap on Channel to enter the channel list.

Tap on a location for your preset .

68 Music

Tap o n Options > Edit to edit the channel list:

Channel name: Name or rename the

channel.

Frequency: Enter your desired frequency.

The old frequency in the location is replaced.

Listen to a radio station

Go to Music > FM radio. The last played station starts to play.

Tune to your desired station (see "Tune to a radio station" on page 67). To select a preset station,

- press or repeatedly, if you have selected Off in Options > Settings > Auto

search;

- or, tap on Channel.

On the radio playback screen,

: Tap to pause or resume radio playback.

Press the side volume key to adjust the volume.

Options > Settings > Background play: Select

On to exit the radio and continue playback

on idle screen.

Options > Loudspeaker: Turn it on to listen to

the radio through the speaker.

To return to the idle screen during playback,

press B.

To turn off the radio on the idle screen

• Press B, and then tap on Yes.

Record radio programs

You can record a radio program when listening to it.

On the radio playback screen, tap on

Options > Record to start recording.

Tap on Pause/Cont. to pause or resume recording. Tap on Stop to stop recording. A file name is generated for the recording file. Edit the file name as desired, if necessary.

Tap on Save to save the file. You can find the recording file under My files > Phone or Memory card > Audio.

Music 69

RDS (dependent on the radio station service)

The feature RDS (Radio Data System) is a service that allows FM stations to send additional information along with the regular FM radio signal.

When you are listening to an RDS station, received text information appears on the screen, including station name, program type (for example, News, Sports, and Info), and frequency.

To enable the RDS reception of your phone

In Music > FM radio, tap on Options > Settings >

RDS, and select On.

70 My files

11 My files

On the phone, all the files are stored under the folders of the phone memory or memory card.

Finding your files

Go to My files.

Select Phone or Memory card, if you have installed a memory card on your phone. Select your desired file folder:

Pictures: for photos, .jpg files and others Videos: for video files, and others Audio: for audio files, like sound recording,

radio recording, music files, ringtones, and others

Others: for all other files, like Ebook (for files

readable through Tools > Text reader), and files received via the Bluetooth

If necessary, open a folder, and tap on

Options to select your view settings: Sort by: Show files in the order of name,

type, time or size.

Browse style (for pictures only): Show files as

a list (file details and thumbnails), or thumbnails only.

Select your default storage location

• Go to Settings > General > Default storage. Tap to select the default location, phone or memory card.

Managing your files

Create sub-folders

You can create sub-folders under the folders (like Pictures, Videos, Audio and Others) or an existing sub-folder.

Select a folder or sub-folder under which you wish to create a folder.

Tap on Create or Options > New folder.

My files 71

In the editing screen, enter a file name. A sub-folder is created.

Manage your files

You can copy and move, delete, or rename your files.

To copy, move, or delete a file

Select a file under a folder.

Tap on Options to select your desired option.

To copy or move a file, select the desired folder, and tap on

Done: Move or copy the file to current

folder or sub-folder.

Open > Options > Open: Open a sub-folder

under current folder/sub-folder.

Open > Options > New folder: Create a sub-

folder under current folder/sub-folder.

To copy, move, or delete multiple files

In a file folder, tap on Options > Select

multiple.

Select Select all or Select one by one to display a fully checked or unchecked list. Ta p to check or uncheck your selection.

Follow Step 2 and 3 under "To copy, move, or delete a file".

Sharing your files

You can share your picture, audio or video files with others via the MMS, E-mail, or Bluetooth.

Select your desired picture, audio or video file, and tap on Options > Send.

Select the option to send the file via the MMS, E-mail , or Bluetooth.

- MMS: for photos smaller than 100k in size (see Step 2 under "Take photos" on page 52); for videos 95k in size (see Step 2 under "Video recorder" on page 58).

- E-mail: for file sizes smaller than 200k. To take photos as E-mail attachment, see Step 2 under "Take photos" on page 52.

72 My files

- If you send your files via the Bluetooth, check your Bluetooth connection first. (see "Bluetooth" on page 75 )

Using your files

Use a picture file as contact picture

• Select the photo, and tap on Options > To

Phonebook.

The photo is set to the contact picture of a contact in your Smart Phonebook (see "Add a contact to Smart Phonebook" on page 37).

- To take photos as contact picture, select

Contact pictures in Image size (see Step 2

under "Take photos" on page 52).

Use a picture file as wallpaper

see "Set photos as wallpaper" on page 58.

Set an audio file as ringtone

• Select an audio file, and tap on Options > Set as

ringtone.

You can set the audio file to ringtone (see "Sounds" on page 83), or associated sound of contacts (see "Add a contact to Smart Phonebook" on page 37).

Calls 73

12 Calls

Call history

You are provided with the records about your incoming and outgoing calls.

Go to View calls to check your call history.

There are three pages on top of all calls: All,

SIM1 and SIM2. Select one of them, the call

history is listed accordingly. You can reply to such calls or add such contacts to your phone book. Go to the call list, select the contact or phone number, and tap on

Options to select your options.

Go to Clear history to clear your call history as desired.

Call options

This menu allows you to set call-related options.

Headset answer

Turn it on to answer an incoming call automatically when using a headset (see "Headset" on page

99). Tap to turn it On or Off.

Any key answer

Turn it on to answer an incoming call by briefly pressing any key

(except for B). Tap to turn it

On or Off.

Call time reminder

Get reminded after the call time span once or repeatedly.

Call services Call timers: Depending on your

network, rounding-off for billing purposes, taxes and others, the actual time invoiced for calls and services by your service provider may vary.

74 Calls

Call cost: network-dependent

Call waiting: Get informed of an

incoming call when on phone (network-dependent, see "Answer a second call" on page

25).

Caller ID: Set how to show your

number to the called party (network-dependent).

Call divert Divert incoming calls to your

voice mailbox or to another phone number (regardless of whether or not the number is in your phonebook).

Call barring Set limits to your incoming and

outgoing calls. Select Change

barring passward to change the

call barring password.

This feature is network dependent and requires a specific call barring password supplied by your service provider.

Auto redial Keep redialing the call number

that fails to go through.

Fixed dial Restrict your outgoing calls to

certain numbers (PIN2 code required).

Bluetooth 75

13 Bluetooth

About Bluetooth

Your phone supports Bluetooth wireless technology, allowing connection to a compatible Bluetooth device within 10 meters. The Bluetooth connection can be subject to interference from obstructions such as walls or other electronic devices.

Before you can apply Bluetooth, make sure the other device supports Bluetooth function by contacting the device’s manufacturer or its accompanied documentation.

Connecting to a Bluetooth device

Consult the user documentation of the Bluetooth device to be connected. Prepare the Bluetooth device for pairing.

Go to Bluetooth > Power. Tap on On, if necessary, to turn on the bluetooth function. You can also turn on the Bluetooth function from the idle screen. Drag the at the top of the idle screen, and tap on On.

Select Find devices to start searching for available Bluetooth devices. A list of available Bluetooth devices appears.

Select the device you wish to connect.

Enter your Bluetooth password (0000 by default) to start pairing. The pairing is made if your pairing request is accepted by the other device.

76 Bluetooth

To connect to a device you connected previously

On the device, check that the Bluetooth function is enabled.

Turn on the Bluetooth of your phone.

On your phone, go to Bluetooth > My

devices. Check that the device is in the list.

The connection is established. If necessary, select the device and tap on Connect.

Use the Bluetooth stereo headset

Consult the user documentation of the Bluetooth headset.

- Check that your Bluetooth headset supports A2DP profile (Bluetooth stereo output).

- Prepare the Bluetooth headset for pairing.

On your phone,

- Check that the Bluetooth function is enabled. Select Bluetooth > Find devices to

start the connection with the Bluetooth headset (see "Connecting to a Bluetooth device" on page 75).

Select and play your desired music or audio files.

To control music playback through a Bluetooth headset

Consult the user documentation of the Bluetooth headset. Check that your Bluetooth headset supports AVRCP profile (Audio/video remote control).

Getting connected by a Bluetooth device

• Go to Bluetooth > Settings:

Change device name: Edit the name of your

phone.

Visibility: Turn it on to make your phone

visible to other Bluetooth devices

The pairing is made when you receive and accept the pairing request (enter the password 0000 if necessary).

Bluetooth 77

Editing your device list

All the devices you have connected are saved to

My devices. To edit the device list,

Go to Bluetooth > My devices.

To rename or delete a device, tap on

Options to select your options.

If you do not use the Bluetooth feature for some time, you should deactivate it in order to conserve battery power.

78 Profiles

14 Profiles

Adjusting ringer settings to different scenes

The profiles are defined for several scenes. They consist of the settings for ringtones, volume, and others. With preset profiles, you can easily adjust the settings for incoming calls and messages as desired.

Define your profiles

This phone has provided you several preset profiles. You can use the default settings or change them as desired.

The settings for Flight mode (on a plane) and Silent mode are unchangeable.

To change the settings

In Profiles, select the profile to be changed. Tap on Modify.

Select the item to be changed. Tap to select your desired options.

Repeat Step 2 until you finish the settings. Tap on OK.

Apply a profile

In Profiles, select the profile to be applied.

Tap on Activate to activate the profile.

If you select Flight mode, you disable the connection between your phone and your mobile phone network.

Settings 79

15 Settings

SIM settings

Dual SIM

There are shortcut for SIM settings on the idle screen, see "SIM settings shortcut and prompt screen" on page 6。

Change current SIM card slot settings:

Slot1 settings/Slot2 settings

• Set SIM card name;

• Select an icon for disoplaying SIM card to identify which card is receiving a call or message;

• Active mode: select on or off.

- On: receive calls and messages.

- Off: do not receive calls and messages.

Primary settings

The default SIM card is SIM1. You are provided services by primary SIM by default.

Tap on SIM1 or SIM2 to select the primary SIM card.

Ask when power on

Display SIM settings screen or not while power on the phone.

80 Settings

Customize the functional displays on idle screen

General

Dashboard Select functional displays to be

shown on the idle screen (see "Functional displays" on page 5).

Language Select a language for your phone.

Time & date Set the clock of the phone (see

"Set clock" on page 15 ).

Auto power-on time: Set time for

the phone to be switched on automatically.

Auto power-off time: Set time for

the phone to be switched off automatically.

Quick call dashboard

Call a contact by long pressing the relating contact icon on the idle screen (see "Quick call" on page 21).

Speed dial Call a contact by long pressing a

numeric key (see "Speed dial" on page 22).

Motion sensor

Turn on/ off functions that are enabled by the motion sensor. see "To use the motion sensor" on page 6.

Pen calibration

see "Stylus" on page 6.

Settings 81

Security setup

This menu allows you to use passwords to protect your SIM card, phone, and information stored on the phone.

PIN protection: Set PIN or PIN2

password protection for your SIM card. (The PIN or PIN2 are provided by the network operator. )

If you enter an incorrect PIN code three times in succession, the PIN code of your SIM card will be locked automatically and you will be prompted to enter the PUK code to unlock it. You can obtain the PUK code from your network operator.

If you enter an incorrect PUK code ten times in succession, the SIM card will be locked permanently. When this happens, please contact your network operator or retailer.

Change PIN and Change PIN2:

Change your PIN and PIN2 passwords as desired.

Phone lock: Set password

protection for your phone. You are required to enter the password each time you turn on the phone (1122 by default).

82 Settings

Safeguard: Set password

protection for the information stored on your phone.

• Safeguard: Enter your password to turn the password protection on or off (1122 by default).

• Activation: Enter your password to select the information that accepts the password protection: msg(s),

Contacts, View calls or/and Speed dial.

• Change safeguard password: Change your password as desired.

Default storage

Select the default storage location for your files: phone or memory card (if a memory card is inserted on your phone).

Memory status

Check the memory occpancy of Contacts, Messaging and My files: on phone and SIM card, or on phone and memory card (if a memory card is inserted on your phone).

Auto screen lock

Set an idle time span for the screen to be locked automatically.

To unlock the screen, short

press ) on the top of the

phone. Or, drag out the innermost dot.

Factory settings

Restore your phone settings to the default values. You need to enter your phone lock password (1122 by default).

Settings 83

Display Sounds

Wallpaper Select an image as the wall paper of

your phone. You can select either a default wallpaper or one of your pictures stored in My files (see "Use a picture file as contact picture" on page 72).

Themes Define the theme for your phone.

Backlight level

Select the brightness of backlight.

Backlight duration

Select the duration of backlight.

Greeting Select whether to show greetings

when your phone is turned on.

Light sensor

Select whether the phone adjust backlight level automatically according to ambient brightness.

Alert type Select alert types.

Ringtones Select a ringtone for incoming calls

and messages.

Ring volume

Adjust the volume of rings.

Key sound

Select whether the key sounds when pressed.

Tap vibration

Select whether there is accompanying vibration for each tap.

Shutter sound

Select shutter sounds for your camera.

Battery low

Select whether a warning tone is emitted when the battery level is low.

84 Settings

Connectivity

This menu allows you to define the service settings available on your phone.

Call options

see "Call options" on page 73.

Network settings

You can set SIM1 and/or SIM2 network.

You can select a network other than your home network only if it has a valid roaming agreement with your home network. If you change the network, some problems may arise during the operation of your phone.

Browser

See "Managing your browser" and "Enabling/ disabling push messages" on page 50.

Connections

The menu allows you to define the Internet access profiles of your phone. Such profiles are usually pre-defined in your SIM card. Consult your network operator for details.

Network selection

Select the network for your phone (service subscriptiondependent).

Automatic is recommended.

Preferences Select your preferred network.

Settings 85

Java settings

Java audio Set the volume level.

Java vibration Turn the vibration On or Off.

Select SIM Select SIM1 or SIM2.

Java SIM1 Profile/Java SIM2 Profile

Select Java network for SIM1 and SIM2 (service subscriptiondependent).

Java network Select a Java network (service

subscription-dependent).

Heap Size Display allowed maximum size

for Java memory.

86 Icons & symbols

Icons & symbols

In idle mode, several symbols can be displayed simultaneously on the main screen. When pressing some of the status icons, the corresponding menu will be displayed on the screen.

If the network symbol isn’t displayed, the network is currently not available. You may be in a bad reception area, moving to a different location may help.

Silent

- Your phone will not ring when

receiving a call.

Vibration only

- Your phone will vibrate

when there is an incoming call.

Battery

- The bars indicate the battery

level

(4 bars = full, 1 bar = low).

SMS

- You have received a new SMS

message.

MMS

- You have received a new

multimedia message.

Wap message - You have received a

Wap push message in the message inbox.

Missed call

- You have a missed call.

Call divert

- All your incoming voice

calls are being forwarded to a number.

Bluetooth - Bluetooth feature is

activated.

Bluetooth headset - The Bluetooth

headset is connected.

Headset

- The headset is plugged into

the phone.

Alarm - The alarm clock has been

activated.

Icons & symbols 87

Roaming

- Displayed when your phone is registered to a network other than your own (especially when you’re abroad).

Home zone

- A zone designated by your network operator. Subscription dependent, contact your service provider for details.

GSM network

: your phone is connected

to a GSM network.

Reception quality:

the more bars are

shown the better the reception is.

Tap on the icon to switch between the flight mode and normal mode.

Wap message - You have received a

Wap push message in the message inbox.

GPRS attach

- Your phone is connected

to the GPRS network.

EDGE - Your phone is connected to

the EDGE network.

Memory card - Indicates the memory

card is in use. You can access your memory card through the My files menu.

Precautions

Radio Waves

Your cellular mobile phone is a low power radio transmitter and receiver. When it is operating, it

sends and receives radio waves. The

radio waves carry your voice or data signal to a base station that is connected to the telephone network. The network controls the power at which the phone transmits.

• Your phone transmits/receives radio waves in

the GSM frequency (900 / 1800 / 1900 MHz).

• The GSM network controls transmission

power (0.01 to 2 watts).

• Your phone complies with all relevant safety

standards.

• The CE mark on your phone shows

compliancy with European electromagnetic

compatibility (Ref. 89/336/EEC) and low

voltage directives (Ref. 73/23/EEC). Your cellular mobile phone is your responsibility. To avoid damage to yourself, to others or to the phone itself, read and follow all the safety instructions and make them known to anyone borrowing your phone. Furthermore to prevent unauthorised use of your phone:

Keep your phone in a safe place and keep it out of small children's reach.

Avoid writing down your PIN code. Try to remember it instead.

Switch off the phone and remove the battery if you are going to leave it unused for a long time. Change your PIN code after purchasing the phone and to activate call restriction options.

The design of your phone complies with all applicable laws and regulations. However your phone may cause interference with other electronic devices. Consequently you should

follow all local recommendations and regulations when using your cellular phone both at home and when away. Regulations on

the use of cellular phones in vehicles and aircraft are particularly stringent.

Public concern has been focused for some time on the possible health risks for users of cellular phones. The current research on radio wave technology, including the GSM technology, has been reviewed and safety standards have been drawn up to ensure protection from exposure to radio wave energy. Your cellular telephone

complies with all applicable safety standards

and the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC.

Always switch off your phone...

Inadequately protected or sensitive electronic equipment may be affected by radio energy.

This interference can lead to accidents.

Before boarding an aircraft and/ or when packing the phone in your luggage: the use of mobile phones

in an aircraft may be dangerous for the operation of the aircraft, disrupt the mobile phones network and may be illegal.

In hospitals, clinics, other health care centres and anywhere else where you may be in the close vicinity of medic

equ

ipment.

In areas with a potentially explosive atmosphere (e.g. petrol stations and

also areas where the air contains dust particles, such as metal powders).

In a vehicle transporting flammable products (even if the vehicle is parked) or a vehicle powered by liquefied petroleum gas (LPG), check first that the vehicle complies with the applicable safety rules.

In areas where you are requested to turn off radio transmitting devices, such as quarries or other areas where blasting operations are in progress.

Check with the vehicle manufacturer that electronic equipment used in your vehicle will not be affected by radio energy.

Pacemakers

If you have a pacemaker:

• Always keep the phone more than 15 cm from your pacemaker when the phone is switched on, in order to avoid potential interference.

• Do not carry the phone in a breastpocket.

• Use the ear opposite to the pacemaker to minimise the potential interference.

• Switch off your phone if you suspect that interference is taking place.

Hearing aids

If you are a user of a hearing aid, consult your physician and hearing aid manufacturer to learn whether your particular device is susceptible to cellular phone interference.

Improved performance

In order to improve the performance of your phone, reduce radio energy emission, reduce battery consumption and ensure safe operation adhere to the following guidelines:

For the optimal and satisfactory operation of the phone you are recommended to use the phone in the

normal operating position (when not using in hands-free mode or with a hands-free accessory).

• Do not expose your phone to extreme

temperatures.

• Treat the phone with care. Any misuse will void the International Guarantee.

• Do not immerse the phone in any liquid; if your phone is damp, switch it off, remove the battery and let them dry for 24hrs before using them again.

• To clean the phone, wipe it with a soft cloth.

• Placing and receiving calls consumes the same amount of battery energy. However, the mobile consumes less energy in idle screen when kept in the same place. When in idle screen and while you are moving, your phone consumes energy to transmit updated location information to the network. Setting the backlight for a shorter period of time as well as avoiding unnecessary navigating in the menus will also help to save the battery’s energy for longer phoning and stand-by performances.

Battery information

• Your phone is powered by a rechargeable battery.

• Use specified charger only.

• Do not incinerate.

• Do not deform or open the battery.

• Do not allow metal objects (such as keys in your pocket) to short circuit the battery contacts.

• Avoid exposure to excessive heat (>60° C or 140° F), moisture or caustic environments.

You should only use Philips Authentic Accessories, as the use of any other accessories may damage your phone

and may be dangerous, and will make all guarantees for your Philips phone null and void. The use of an incorrect type of battery may also cause an explosion.

Make sure damaged parts are replaced immediately by a qualified technician and that they

are replaced with genuine Philips replacement parts.

Your mobile phone and your car

Studies have shown that speaking on the telephone while driving lowers your concentration, which can be dangerous. Adhere to the following

guidelines:

• Give your full attention to driving. Pull off the road and park before using the phone.

• Respect the local regulations in countries where you drive and use your GSM phone.

• If you want to use your phone in a vehicle, install the hands-free car kit which is designed for that purpose.

• Ensure that your phone and car kit do not block any air bags or other security devices fitted in your car.

• The use of an alarm system to operate a vehicle's light or horn to indicate incoming

phone calls is prohibited on public roads in some countries. Check local regulations.

EN 60950 Norm

In hot weather or after prolonged exposure to the sun (e.g., behind a window or a windscreen), the temperature of your phone's casing might increase, especially when featuring a metallic finish. Be very careful in this case when picking up your phone and also avoid using it with an ambient temperature over 40° C.

For your phone, the socket-outlet shall be installed near the phone and shall be accessible.

Environmental care

Remember to observe the local regulations regarding the disposal of the packaging materials, exhausted batteries and old phone and please

promote their recycling.

Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.

WEEE Marking in the DFU: “Information to the Consumer”

Disposal of your old product

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/ EC

Please inform yourself about the local separate collection system for

electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.

The labelled packaging material is recyclable.

A financial contribution has been made to the associated national packaging recovery and recycling system.

The plastic material is recyclable (also identifies the type of plastic).

Tips

How to prolong the battery life of your phone

To have your mobile phone function properly, sufficient battery power is important. For the power-saving purpose, do the following, if applicable:

Turn off the Bluetooth function of your phone.

Set the backlight level of your phone to a low value. Or, turn on the light sensor.

Set the backlight duration of your phone to a low value.

Turn on the auto keypad lock. When the keypad is locked, your phone goes to the power-saving mode.

Turn off the key sounds, tap vibration, or vibration alerts.

Establish GPRS connection when needed. Otherwise, your phone will keep searching for GPRS connection, and drain your battery power.

Turn off your phone if there is no coverage. Otherwise, the phone will keep searching for network, and drain your battery power.

Troubleshooting

The phone does not switch on

Remove/reinstall the battery. Then charge the phone until the battery icon stops scrolling. Unplug the charger and try to switch the mobile on.

The display shows BLOCKED when you switch on the phone

Somebody tried to use your phone but didn’t know the PIN code nor the unblocking code (PUK). Contact your service provider.

The display shows IMSI failure

This problem is related to your subscription. Contact your operator.

Your phone doesn’t return to idle screen

Long press the hang-up key or switch off the phone, check that the SIM card and the battery are installed correctly and switch it on again.

The network symbol is not displayed

The network connection is lost. Either you are in a radio shadow (in a tunnel or between tall buildings) or you are outside the network coverage area. Try from another place, try to reconnect to the network (especially when abroad), check that the antenna is in place if your mobile has an external antenna, or contact your network operator for assistance/information.

The display doesn’t respond (or the display responds slowly) to key presses

The display responds more slowly at very low temperatures. This is normal and does not affect

the operation of the phone. Take the phone to a warmer place and try again. In other cases please contact your phone supplier.

Your battery seems to over heat

You might be using a charger that was not intended for use with your phone. Make sure you always use the Philips authentic accessory shipped with your phone.

Your phone doesn’t display the phone numbers of incoming calls

This feature is network and subscription dependent. If the network doesn’t send the caller’s number, the phone will display Call 1 or

Withheld instead. Contact your operator for

detailed information on this subject.

You can’t send text messages

Some networks don’t allow message exchanges with other networks. First check that you have entered the number of your SMS centre, or

contact your operator for detailed information on this subject.

You can’t receive and/or store JPEG pictures

A picture may not be accepted by your mobile phone if it is too large, if its name is too long, or if it doesn’t have the correct file format.

You feel that you have missed some calls

Check your call divert options.

When charging, the battery icon shows no bar and the outline is flashing

Only charge the battery in an environment where the temperature does not go below 0°C (32°F) or above 50°C (113°F).

In other cases please contact your phone supplier.

The display shows SIM failure

Check that the SIM card has been inserted correctly. If the problem persists, your SIM card may be damaged. Contact your operator.

When attempting to use a feature in the menu, the display shows NOT ALLOWED

Some features are network dependent. They are only available, therefore, if the network or your subscription supports them. Contact your operator for detailed information on this subject.

The display shows INSERT YOUR SIM CARD

Check that the SIM card has been inserted correctly. If the problem persists, your SIM card may be damaged. Contact your operator.

The autonomy of your phone seems lower than indicated on the user guide

The autonomy is linked to your settings (e.g., ringer volume, backlight duration) and the features you use. To increase the autonomy, and whenever possible, you must deactivate features you do not use.

Your phone doesn’t work well in your car

A car contains many metallic parts that absorb electromagnetic waves which can affect the phone’s performance. A car kit is available to provide you with an external antenna and enables you to make and receive phone calls without handling the handset.

Check with the local authorities whether or not you are allowed to use the phone while driving.

Your phone is not charging

If the battery is completely flat, it might take several minutes of pre-charge (up to 5 minutes in some cases) before the charging icon is displayed on the screen.

The picture captured with the phone camera is not clear

Make sure that the camera lens on both sides is clean.

Philips Authentic Accessories

Some accessories, such as a standard battery, headset, USB cable and a charger, are included as standard accessories in your mobile phone package. Additional accessories may also be provided or sold separately. Package contents may therefore vary.

To maximize the performance of your Philips mobile phone and not to void the warranty, always purchase Philips Authentic Accessories that are specially designed for use with your phone. Philips Consumer Electronics cannot be held liable for any damages due to use with non authorised accessories.

Charger

Charges your battery in any AC outlet. Small enough to carry in a briefcase/handbag.

Headset

Your phone will activate the headset profile automatically when you plug in the headset.

When using the supplied one-key headset, press the key to answer a call, and long press the key to end the call.

USB cable

When connected to a computer through the USB cable (compatible with most computers), your phone can work as

Charger Charges the battery on the

phone.

Mass Storage

Allows the data transfer between PC and the phone, or the microSD card inserted into the phone;

Allows the data management on the phone, or micro-SD card through your PC.

Philips xenium x806 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual