Philips W10162446A User Manual

1
Connect
A
Placement
Proper speakers system placement is important to ensure optimum sound performance.
A Place the center speaker above or close to the TV. B Place the subwoofer on the floor, at least one meter
away from the TV.
C Place the front speakers at equal disctances from the
TV.
D Place the rear speakers at normal listening ear level.
2
Set up
B
Connect the radio antennas
Keep the antennas away from the electronic devices to prevent unwanted interference.
A
B
C
A Connect the FM antenna to the FM jack. Extend the
wire and fix its end to the wall.
B Unfold the AM loop antenna and fix the claw into
the slot.
C Connect the AM loop antenna to the AM jack. Place
the AM loop antenna on a shelf, or attach it to a stand or wall.
C
Connect the speakers and
subwoofer
Connect the various colored plugs from the speakers and subwoofer to the same colored jacks at the rear of the DVD system.
DVD System (rear)
REAR
LEFT
REAR
RIGHT
FRONT
LEFT
FRONT
RIGHT
FRONT
CENTER
SUB-
WOOFER
A
Finding the viewing channel
A Press STANDBY ON on the DVD system. B Press SOURCE on the DVD system until “DISC”
appears on the display panel.
C Turn on the TV. Use the TV’s remote control to
select the correct viewing channel for the DVD system.
You should see the blue DVD background on the
TV.
Note To search for the correct viewing channel, press the Channel Down button on the TV’s remote
control repeatedly (or AV, SELECT,
° button) until
you see the blue DVD background.
B
Select the display language on the
screen
A Press SETUP.
The setup menu appears. Use WXTS keys on the remote control to navigate in the menu.
B Highlight icon and press T. Move to in the
menu and press X.
C Move to { MENU LANG } in the menu and press X. D Use TS keys to select a language option in the
menu and press OK to confirm.
E Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this DVD system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this DVD system. Refer to the user manual for more information.
D
Connect the DVD system to TV
A
B
A Use the supplied composite video cable to connect
the CVBS jack on this DVD system to the VIDEO IN jack on your TV.
B Plug in the power cable from the DVD system to an
AC power outlet.
Note It is important to connect the DVD system directly to your TV.
DVD System (rear)
Television ( rear)
E
Connect the audio from other
device to DVD system (optional)
Use the red and white audio cables to connect the AUX IN (R/L) jackts on this DVD system to the AUDIO output jacks on your Audio/Video device (for example, DVD recorder, VCR).
b
AUDIO
OUT
AUDIO OUT
Note Press TV/AUX/DI on the remote control to get the sound output from the speakers system when watching the TV program.
DVD System (rear)
DVD System (rear)
3
Enjoy
DVD HOME THEATRE SYSTEM HTS3090
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
What’s in the box?
DVD system
Remote Control
and 2 batteries
User Manual
1 video cable 1 audio cable
Start disc playback
A Press OPEN CLOSE to open the disc tray.
Load a disc and close the disc tray.
B Playback will start automatically. C If the disc menu appears, use TS
keys to select an option in the menu and press PLAY X to start playback.
D Press STOP x to stop playback.
Listen to radio
A Press TUNER.
The display panel will show “AUTO INSTALL
PRESS PLAY”.
B Press PLAY X until “START ...” appears on the
display panel. All the available radio stations with strong reception signal will be stored automatically.
C Once complete, use . > keys to select a
preset radio station.
D To delete a preset radio station, hold down STOP
x until “DELETED” appears.
Experience surround sound
A Press SURR to switch between stereo and multi-
channel.
B Press SOUND to select either CONCERT,
DRAMA, ACTION, SCI-FI, CLASSIC, JAZZ, ROCK or DIGITAL preset digital sound effects.
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
Press DISC button on the remote control.
Check the connection to the TV and ensure the plugs are  rmly in place.
No sound.
Adjust the volume.
Check the speaker connections and settings.
Check the audio connections and press SOURCE button to select the correct input source.
The center and rear speakers operate only in multi-channel surround mode. Press SURR button to select multi-channel surround output.
When playback of DTS track, press AUDIO to select other audio track.
The DVD system does not work.
Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again.
1 center, 2 front, 2 rear speakers
and subwoofer
FM wire antenna
AM/MW loop
antenna
Need help?
User Manual
See the user manual that came with your Philips DVD System
Online
Go to www.philips.com/support
2006 C Koninklijke Philips N.V. All rights reserved.
www.philips.com
Note When you press PLAY button again, the playback will resume from its last stopped
point. To start playback from the beginning, you have to press STOP button two times to cancel the resume mode, then press PLAY button.
Note This feature is only available for the  rst time
setup. If you wish to reinstall all the radio stations, hold down the PROGRAM button on the remote control.
Adaptor
Loading...