Philips VSS2364/00T, VSS2364/C4T User Manual

FCC declaration

English

Warning: To prevent fire or shock hazard, do not expose camera or monitor to rain or moisture.

The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation mark within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions: 1 This device may not cause harmful interference. 2 This device must accept any interference received,

including interference that may cause undesired

operation.

This equipment has been tested and found to comply

with the limits for a class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Electro Magnetic Compatibility (EMC)

This equipment complies with the European rules for

EMC according to EN50081-1 and EN50082-1.

The equipment conforms with the EMC directive and

low-voltage directive.

This device complies with EMC rules under test

conditions that included use of system cables and

connectors between system components. If you have any

problems, contact your dealer.

Warning

Any unauthorized modification to this equipment may cause

violation of the FCC or EMC rules resulting in the revocation

of the authorization to operate the equipment.

Englishg

B/W Observation Quad

The illustrations to which this manual refers are shown on the front cover flap.

Table of contents

Introduction...............................................................................................2

Installation..................................................................................................3

Monitor

Cameras VCR Extra monitor Alarm contact

Cable

Operation....................................................................................................4

Monitor

System on/off Power save/active

Normal mode Silent mode

Brightness/Contrast Volume Talk function

Doorbell function

Action function View modes

Full screen mode Camera sequence mode Quad mode VCR mode

Clock adjust function

Display time and date (on/off) Time and date adjustment

Event replay function Next camera input

Alarm

Alarm programming Automatic alarm termination Premature alarm termination Alarm priority

Tips for maintenance.........................................................................5

Page

Introduction

By purchasing this system you possess a sophisticated, easy-to-operate observation system.

The observation system consists of a specially designed monochrome monitor with a number of observation and security functions, including:

• Reproduction of image and sound picked-up by the

camera (can be extended by an intercom). The reproduced images and sound can be recorded by means of a video recorder.

• Quad mode feature displays images of up to 4 cameras

in 4 quadrants on the monitor screen.

• Event replay function to store and replay the images of

an alarm, a doorbell or a lost camera.

• Monitoring of the camera lines for breakage in the cable.

• Alarm detection by means of an alarm box (optional) or

by the alarm contacts on the camera.

• Triggering external equipment by means of an action

box (optional) and/or alarm.

• On Screen Display (OSD) to show time, date, camera

number and alarm information on screen or on video tape.

When the picture and sound are switched off by means of the power save switch on the control panel of the monitor, the cameras continue to transmit images and sound to the VCR and slave output. The alarm functions also remain active.

In addition, several CCD cameras and accessories can be connected to the monitor by means of a four-wire (telephone) system cable.

Accessories:

The system can be extended by one or more system accessories or other peripheral equipment, such as:

• Intercom box

• Alarm box

• Action box

• Cameras (a maximum of four)

• Cable extension adapter

• Camera interface box

• Slave monitor

• Video printers

Mains supply:

The monitor can be connected to a power voltage of 100-240 V ~ 50/60 Hz. The safe low-voltage (24 V _) for the camera(s) and the system accessory boxes is supplied by the monitor through the system cable.

Read these instructions, before putting your system in operation.

+ 3 hidden pages