Philips VisaPure Advanced SC6040/00 User Manual

VisaPure

ADVANCED/AVANCÉ

SC6040/00

FRESH EYES/

RAFRAÎCHISSEMENT

DU CONTOUR DES YEUX

4222.100.7352.1

www.philips.com

15 sec.

15 sec.

1 2

3 4

ENGLISH

Introduction

The Fresh Eyes head with its
customized DualMotion program
gently massages the skin below the
eye.The premium coating gives a
cooling and refreshing experience:
a boost of freshness for tired eyes in
only 30 seconds!

Note: Please read all instructions for
VisaPure Advanced before using the
Fresh Eyes head.

Important

Caution

- The Fresh Eyes head is intended
for use on the bony area below
the eye. Do not place the Fresh
Eyes head on the eyeball or on the
eyelid.

- Do not use the Fresh Eyes head if
it is damaged or broken to avoid
injuries.

- Do not use the Fresh Eyes head if
you have glaucoma, an eye injury,
or have had eye surgery within the
last 12 months.

- Do not use the Fresh Eyes head if
you are allergic to aluminium.

- If you wear contact lenses or
glasses, remove them before using
the Fresh Eyes head.

- Do not put the Fresh Eyes head in
the refrigerator or freezer, as this
may cause a hazardous situation
for your skin.

- Do not put the Fresh Eyes head in
the dishwasher.

- For hygienic reasons, it is
recommended the Fresh Eyes head
be used by only one person.

Fresh eyes

The Fresh Eyes head is suitable for
all skin types. We advise you to use it
once a day in the morning.

Fresh eyes program

The massage program consists of 2
treatment periods of 15 seconds each.
It has 2 intensity settings. At intensity
setting 1, the head vibrates. At intensity
setting 2, the head vibrates and rotates.

Note: Each treatment period has
a specic rotation direction that is
optimized for the skin zone treated.

Using the Fresh Eyes head

You can use the Fresh Eyes head on dry
skin or after applying cream to your skin.
1 Push the Fresh Eyes head onto the

connection pin until it locks into
position with a click (Fig. 1).

2 Press the on/o button to switch

the appliance on and choose your
preferred setting.

Note: When you attach a dierent
head the appliance recognizes
it. You will hear a beep and the
intensity setting indications ash
alternately. (Fig. 2)

3 Place the Fresh Eyes Head on

the bony area below the right
eye. Gently move the head from
the nose towards the temple and
repeat this movement (Fig. 3).

Note: Do not push the head too
hard onto the skin to make sure the
treatment remains comfortable.

4 After 15 seconds, the appliance

pauses briey to let you know you
have to move it to the area below
the left eye (Fig. 4).

5 When the program is nished, turn

the appliance o.

Cleaning and storage

Do not use scouring pads, abrasive
cleaning agents or aggressive liquids
such as alcohol or acetone to clean the
appliance or attachments.
1 Clean and store the appliance after

each use according to the VisaPure
Advanced user manual.

2 Thoroughly clean the Fresh Eyes

head with warm water and mild
soap after each use. Shake o
excess water.

3 Remove the Fresh Eyes head from

the handle and clean the back of
head and the connection pin of the
appliance under the tap.

4 Dry the Fresh Eyes head with a soft

towel or allow to air dry thoroughly.

5 Store in a cool, dry place.
Note: Never store a wet Fresh Eyes head.

Assistance

For assistance, visit our website:
www.philips.com/support or call toll
free 1-800-243-7884 (in US only) or
1-866-800-9311 (in Canada only).
Online information available 24 hours
a day, 7 days a week.