Philips TY5080/00 user manual [zh]

TY5080

Always there to help you

始终如一地为您提供帮助

有疑 问？

请联系飞利浦

Read this user manual carefully before you
use the appliance.
Save it for future reference.

使用产品前请仔细阅读本使用说明书
保留备用

EN

User manual

3 ZHS

用户手册

23

EN

Contents

1 Important 4

Safety 4

2 Yourairpurier 6

Product Overview 6
Controls overview 7

3 Getting started 8

Install lters 8

4 Using the appliance 10

Understand the air quality light 10
Switch on 10
Change the fan speed 11

5 Cleaning 13

Cleaning schedule 13
Clean the body of the appliance 13
Clean the air outlet cover 13
Clean the air quality sensor 14

Clean the pre-lter 15

6 Replacingtheairpuricationlter16

Understand the healthy air protect

lock 16

Replace the air purication lter 16

10 Notices 20

Electromagnetic elds (EMF) 20

Recycling 20

7 Resettingthelterlifetime

counter 17

8 Troubleshooting 18

9 Guarantee and service 20

Order parts or accessories 20

3

EN

1 Important

Safety

Read this user manual carefully before you
use the appliance, and save it for future
reference.

Danger

• Do not let water or any other liquid

or ammable detergent enter the

appliance to avoid electric shock and/or

a re hazard.

• Do not clean the appliance with water,

any other liquid, or a (ammable)

detergent to avoid electric shock and/

or a re hazard.

• Do not spray any ammable materials

such as insecticides or fragrance around
the appliance.

Warning

• Check if the voltage indicated on the

appliance corresponds to the local
power voltage before you connect the
appliance.

• If the power cord is damaged, you must

have it replaced by Philips, a service

center authorized by Philips, or similarly
qualied persons in order to avoid a
hazard.

• Do not use the appliance if the plug,

the power cord, or the appliance itself
is damaged.

• This appliance can be used by children

aged from 8 years and above and

persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a

safe way and understand the hazards

involved. Child shall not play with the
appliance. Cleaning and maintenance
shall not be made by children without
supervision.

• Do not block the air inlet and outlet,

e.g. by placing items on the air outlet or
in front of the air inlet.

• Make sure that foreign objects do not

fall into the appliance through the air
outlet.

Caution

• This appliance is not a substitute for

proper ventilation or regular vacuum
cleaning.

• If the power socket used to power the

appliance has poor connections, the
plug of the appliance becomes hot.

Make sure that you plug the appliance

into a properly connected power
socket.

• Always place and use the appliance

on a dry, stable, level, and horizontal

surface.

• Leave at least 20cm free space behind

and on both sides of the appliance and
leave at least 30cm free space above
the appliance.

• Do not place anything on top of the

appliance.

• Do not sit or stand on the appliance.

The appliance is equipped with omni
wheels. Sitting or standing on the

appliance may lead to potential injuiry.

• Do not place the appliance directly

below an air conditioner to prevent
condensation from dripping onto the
appliance.

• Make sure all lters are properly

installed before you switch on the
appliance.

4

EN

• Only use the original Philips lters

specially intended for this appliance.

Do not use any other lters.

• Avoid knocking against the appliance

(the air inlet and outlet in particular)
with hard objects.

• Always lift or move the appliance

by both handles at the sides of the
appliance.

• Do not insert your ngers or

objects into the air outlet or the air
inlet to prevent physical injury or

malfunctioning of the appliance.

• Do not use this appliance when

you have used indoor smoke-type
insect repellents or in places with oily
residues, burning incense, or chemical
fumes.

• Do not use the appliance near gas

appliances, heating devices or replaces.

• Always unplug the appliance after use

and before cleaning or carrying out
other maintenance.

• Do not use the appliance in a room

with major temperature changes, as

this may cause condensation inside the
appliance.

• To prevent interference, place the

appliance at least 2m away from
electrical appliances that use airborne
radio waves such as TVs, radios, and
radio-controlled clocks.

• This appliance is only intended to be

used indoor under normal operating
conditions.

• Do not use the appliance in wet

surroundings or in surroundings with
high ambient temperatures.

• The appliance does not remove carbon

monoxide (CO) or radon (Rn). It

cannot be used as a safety device in
case of accidents with combustion

processes and hazardous chemicals.

• If you need to move the appliance,

disconnect the appliance from the

power supply rst. The appliance is

equipped with omni wheels and is easy
to move.

• When moving the appliance, do it

slowly and do not push it rapidly.

• Do not move the appliance by pulling

its power cord.

5

EN

2 Your air purifier

Read this user manual carefully before you use the appliance, and save it for future reference.

Product Overview

Air outlet cover

Speed knob

Filter 2: Integrated Filter

for Tai series

Filter 1: Pre-lter

Air outlet cover knob

Air quality sensor

Side panels

Type number Filter

TY5089 Integrated Filter for Tai series*

*Hereinafter referred to as "air purication lter".

6

EN

Controls overview

: On/Off button : Turbo speed

: Silent speed : Pre-lter cleaning alert
: Speed 1 : Air purication lter replacement alert
: Speed 2 : Air quality light button
: Speed 3 : Auto button

7

EN

3 Getting started

Installlters

Remove the packaging of the lters

before using the appliance. Unpack them
and place them back into the appliance

described as follows:

Note

2 To take out the pre-lter, press the

two clips down and pull the lter

towards you.

• There is one set of lters on each
side of the appliance. Each side is

equipped with one pre-lter and one air
purication lter.

• Insert the lters in the correct position.

• Make sure that you place the air

purication lter in the appliance rst
and then the pre-lter.

• Make sure that the side with the tag is
pointing towards you.

1 Unlock the side panel from the

appliance, and then gently pull the
bottom of the side panel towards you.

3 Take out the air purication lter from

the appliance.

4 Remove the packaging materials of the

air purication lter.

8

EN

5 Put the unpacked air purication lter

back into the appliance.

6 Put the pre-lter back into the

appliance.

Note

7 To reattach the side panel, mount

the panel onto the bottom of the

appliance rst (1). Then, gently push

the panel against the body of the

appliance (2).

8 Repeat all steps for the other side of

the appliance.

• Make sure that the side with the two
clips is pointing towards you, and that

all hooks of the pre-lter are properly
attached to the purier.

9

EN

4 Using the appliance

Understand the air quality
light

Color of the air quality
light

Blue Good
Dark purple Fair
Pink Unhealthy
Red Very unhealthy

The air quality light automatically goes on
when the appliance is switched on, and
lights up all colors in sequence. In a short
while the air quality sensor selects the
color that corresponds to the ambient air
quality.

Note

• The built-in air quality sensor measures
the air quality and automatically selects
the appropriate color of the air quality
light. When the air is clean, the color of
the air quality light is in blue. When the
air quality deteriorates, the color of the
air quality light changes to dark purple,
purple or red.

Air quality level

Switch on

1

Put the plug of the appliance into the
wall socket.

» The appliance beeps.
» All lights go on once and then go

out again.

2 Press to switch on the appliance.

» After measuring the air quality

for a short time, the air quality
sensor automatically selects
the appropriate color of the air
quality light.

» The default fan speed is

(AUTO).

3 Press again to switch off the

appliance.

10

EN

Change the fan speed

(AUTO)

In auto mode, the appliance selects the
appropriate fan speed in accordance with
the ambient air quality.

1 Press to select the auto mode.

» and one of the fan speed

indicators light up.

Manual

You can mannually select the fan speed
you need.

1 Turn the speed knob to select the fan

speed:

(Speed 1)
(Speed 2)
(Speed 3)
(Silent speed)
(Turbo speed)

2 Press again to deactivate the auto

mode.

» The appliance operates in manual

mode.

Note

• You can also turn the speed knob and
select another fan speed to switch from
auto mode to manual mode.

Tip

• If the air quality light lights up blue, the
air quality is good, and you can select a
lower fan speed. On the other hand, if
the air quality light lights up pink or red,
the air quality is unhealthy, and you can
select a higher fan speed to purify the
air more quickly.

11

EN

Set the sensitivity of the air
quality sensor

This appliance allows you to adjust the

sensitivity of the air quality sensor. There

are three sensitivity levels:

• Extra sensitive (default setting)

• Sensitive

• Standard

You can adjust the sensitivity of the air
quality sensor in the following way:

Note

• At higher sensitivity level, the purier
is more sensitive to air pollutants.

When the purier is in auto mode, it

is more likely to choose a higher fan
speed. The air quality sensor selects the
appropriate color of the air quality light
in accordance with the higher sensitivity.

1 Unplug the appliance rst, plug it in

again and switch it on. Within 5 to 30

seconds from the appliance is switched
on, press and hold and for 3
seconds.

» The corresponding fan speed

light ashes to show the current

sensitivity level of the air quality
se nsor.

3秒

3S

Fan speed light Sensitivity level

Extra sensitive

Sensitive

Standard

2 Turn the speed knob to adjust the

sensitivity level of the air quality sensor.

3 When the desired sensitivity level is

selected, press and hold and for
3 seconds again to save the setting.

Note

• When you are changing the sensitivity
level, if you do not change any setting
within 10 seconds, or do not press and
hold
you have changed the sensitivity level,
the appliance will resume normal work
without saving any changes.

• After the sensitivity level is changed
and saved, the appliance operates at
the latest setting of the sensitivity level
whenever you switch on the appliance.

and for 3 seconds after

12