Philips TV Cables User Manual
Connecting Hi- System or External Speakers to TV
3
How t
o
Better
SPDIF (Sony and Philips Digital Interconnect Format)
is highly recommended for high quality digital
surround sound output.
ma k
e
Use this guide to achie ve the optimal connection for each of your components
TV can support these different types of cable connection. Please check your
device to see which one applies.
the best connection
.
Connection Basics
Audio Out
Connect red/while audio cables from the TV
A
monitor output jacks to the rear of hi-fi system
or external speakers.
AV1 in
Pb
AV2 in
Y
Pr
S-VIDEO
TV Jack Panel
VIDEO
L/Mono
AUDIO
Monitor out
R
COMPONENT VIDEO INPUT
SPDIF
B
Connect audio cable from the SPDIF jack on the
rear of the TV to the DIGITAL IN jack on the
rear of the hi-fi system or external speakers.
1
Better Good
Component Video
Input (CVI)
Provides superior picture
quality by separating the
green, blue and red
luminance signals. Typically
used with red/white
audio cables.
Connecting Set-Top Box to TV
S-Video
Supplies a better picture
than RF and Composite
connections. Used with
red/white audio cables.
Basic
Composite Audio/Video
Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the set-top box and other devices.
Note
: The color of audio inputs
may differ, e.g. red/white or
red/black.
Basic
RF
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
OR
A
TV
IN
Need more help?
User manual:
Check the user ma ual that came with your
Online help www.p4c.philips.com or
:
n
www.usasupport.philips.com
TV.
B
-
RF Cable
Cable Signal IN
C
from Cable Company
A
TO
TV/VCR
CABLE
IN
Basic
RF
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
IR
DVD-D OUT
USB
TV
PASSCARD
AUDIO IN
R L
AUDIO OUT
SPDIF
IN OUT
Y Pb Pr
VIDEO
Connect RF cable
A
from wall to input at
the back of the set-top
box.
Use second RF cable to
B
connect the set-top box
to the TV input (75 ).
Note: This connection gives
mono sound. For stereo
sound use also composite
audio/video connection
(Refer to panel 2).
Back of Set-Top Box
S-VIDEO
OPTICAL
SPDIF
Set the out channel of the
C
set-top box to CH 3 or 4
if available.
Press the A/D button on the
remote control to set the
TV to analog mode.
Set the TV to the same
D
channel as the set-top box
output channel.
Change the channels at the
set-top box to view the
program.
2005 © Koninklij ke Philips Electronics N.V.
All rights reserved.
3139 125 35352
B
75
75 Input
TV
Other Possible
Connections
Monitor out
Component
Video
Refer to panel 2.
2
Connecting Input Device to TV (eg. DVD player, Digital Recorder, VCR, Video Camera, Games Console)
OR
Component Video Input
A
Insert Component
Video connectors into
their corresponding
jacks on both DVD
player/DVD recorder
and TV (sometimes
labeled Y, Pb and Pr).
Connect red/white
audio cables to the
audio output jacks
on DVD player/DVD
recorder and audio
AV inputs on TV.
B
Turn on TV and DVD
player/DVD recorder.
Press the AV button
on the remote control
until CVI appears on
TV screen.
C
Insert a pre-recorded
DVD into DVD player/
DVD recorder and
press PLAY to verify
correct connection.
D
AV1 in
AV2 in
R
VIDEO
COMPONENT VIDEO INPUT
TV
Back of DVD Player/Recorder
AV Buttons
Remote
Control
TV Jack Panel
S-VIDEO
OUT
OUT
OUT
L
R
AUDIO
VIDEO
COM
P VIDEO
Y
Pb
Pr
A
B
C
Note: When using CVI, it is best not to connect a video
signal to the other AV input on the TV.
Monitor out
Monitor out
L/Mono
Component Video
Input (CVI)
Provides superior picture quality
by separating the green, blue and
red luminance signals. Typically
used with red/while audio cables.
Better
S-Video
Connect audio cables
(red/white) to audio AV
inputs on back of TV and
Audio outputs on back
of VCR.
B
Insert pre-recorded
videotape into VCR and
press PLAY to verify
correct connection.
D
C
Turn on TV and VCR.
Press the AV button
on the remote control
until S-Video appears
on TV screen.
TV Jack Panel
Back of VCR
AV Button
B
TV
S-VIDEO
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
L/Mono
VIDEO
COMPONEN
T VIDEO INPUT
AUDIO OUT
L R
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
A
CH+ and CH- Buttons
Remote
Control
C
A
Connect S-Video
cable to S-Video input
on back of TV and
S-Video output on
back of VCR.
Note: When you connect S-Video and AV2 at the same time,
Monitor out
Monitor out
Good
S-Video
Supplies a better picture
than RF and Composite
connections. Used with
red/white audio cables.
you can only hear sound coming from S-Video.
S-Video will dominate over the Video of AV2.
Composite Audio/Video
Connect the video
cable (yellow) to the
VIDEO AV input on
back of TV and the
corresponding video
output on back
of VCR.
A
Connect audio cables
(red/white) to audio
AV inputs on back of
TV and the
corresponding audio
outputs (L & R) on
back of VCR.
B
Turn on the TV and
VCR. Press the AV
button on the remote
control until AV1 or
AV2 appears on TV
screen.
C
Insert pre-recorded
videotape into VCR
and press PLAY to
verify correct
connection.
D
TV
TV Jack Panel
Back of VCR
B
S-VIDEO
A
V1 in
AV2 in
AUDIO
R
L/Mono
VIDEO
COMPONEN
T VIDEO INPUT
AUDIO OUT
R L
S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
AV Button
Remote
Control
C
A
Monitor out
Monitor out
Basic
Composite Audio/Video
Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the set-top box and other devices.
: The color of audio inputs
may differ, e.g. red/white or
red/black.
Note
Composite Audio/Video
TV Side Jack Panel
VIDEO
AUDIO
L
R
S-VIDEO
VIDEO
AUDIO
LEFT RIGHT
AV Button
Remote
Cont r ol
Video Camera
TV
Video Camera Jack Panel
A
B
C
D
B
C
A
Note:
for mono devices,
connect only white audio
cable from
output to white audio input
on the side of TV.
device’s audio
OR
OR
OR
Basic
Composite Audio/Video
Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the set-top box and other devices.
: The color of audio inputs
may differ, e.g. red/white or
red/black.
Note
Connect the video
cable (yellow) from the
video output on camera
(or other device) to the
video input (yellow)
located on the side of TV.
Connect audio cables
(red/white) from audio outputs
on device to audio inputs
(red/white) on the side of TV.
Press PLAY on the
device to verify
connection
Turn on TV and the
device. Press the AV
button on the remote
control until FRONT /
SIDE appears on TV
screen.
TV Side Jack Panel
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
1 2 3
4
5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
1 2 3
4
5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
1 2 3
4
5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
1 2 3
4
5 6
7 8 9
0
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP
A/CH
CC INFO
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
Loading...