Philips TTX400 User Manual

Light-line systems

Selection guide – Light-line systems

Luminaire family Page Lamps Reflectors Wiring

Fluorescent

Maxos

TTX400

Tetrix TTX150

8.4

8.32

8.64

TL5

TL-D Steel Aluminum 5-wire

mm

2

• • • • • •

• • • • • • •

• • • • •

7-wire

mm

9-wire

2

mm

2

Philips indoor luminairesLight-line systems8.2

Selection guide – Light-line systems

Luminaire family Wiring Protection Emergency

lighting

2x5 wire

2

mm

Maxos

• • •

TTX400

Tetrix TTX150

2x7 wire

2

mm

Bus bar

(flexible

positioning)

IP class

IP64

IP63

IP40

IP20

IP20

IP20

• • •

• •

•

Lighting

control

Dynamic lighting option

(color mixing)

Light-line systems

Philips indoor luminaires Light-line systems 8.3

Maxos

Philips indoor luminaires8.4 Light-line systems

Maxos – the multifunctional
performer, in proper style

Maxos has been designed on the basis of in-depth knowledge of end-user needs

in the retail business and industry. It also offers solutions for schools, ofces and

public spaces. Maxos’ durable quality and electrical exibility, combined with a

wide selection of reectors and accessories, ensure well-designed, cost-effective

lighting solutions with minimum energy consumption.

Maxos is designed for fast installation and is available in TL-D and TL5 versions, in the colors

silver and white, and with IP20 and IP64 protection. The possibility of integrating projectors and

the exibility in positioning electrical units make it the ideal system for retail outlets.

www.philips.com/lighting

Light-line systems

Aluminum reector TL-D, perforatedAluminum reector TL5 Trapeze reectorFacetted reector with D6-louver

Philips indoor luminaires 8.5

Light-line systems

Maxos

1 2

Main applications

1 Retail

Combining attractive design and compact dimensions with outstanding light output and

distribution, Maxos is ideally suited to retail applications – e.g. food, non-food and fashion

stores. The combination of TL5 lamps and aluminum reectors, for example, delivers exactly

the right amount of light precisely where it is needed. Maxos also offers extensive options to

integrate projectors/spots, as well as exibility in positioning of electrical units and spots (bus

bar system). The light-line system is available in both silver and white, ensuring a perfect match

with the store interior.

Light-line systems

Philips indoor luminaires8.6

2 Industry

The Maxos light-line system helps to boost operating efciency and safety in industrial

facilities by delivering high lighting levels with low glare, while at the same time reducing

energy consumption and maintenance. Dedicated TL-D aluminum reectors are available

for each application. Maxos has IP64 protection options across the system. A dedicated IP63

reector unit – the outside of which can be cleaned – has been developed for the automotive

and food industries. Maxos is also available in versions with up to 14 wires; this allows, among

other things, zones for separate switching and emergency lighting with cabling separated from

the standard mains.

3Ofces

In ofce environments, the Maxos light-line system delivers high lighting levels, combined with

low glare, for example by means of TL5 lamps in combination with OLC semi-high-gloss high-

quality aluminum optics with 3D lamellae (D6). This creates a bright, stimulating ambience that

minimizes visual fatigue and improves productivity.

4 Public spaces

Maxos’ appealing design aesthetic and system exibility makes it eminently suited to a host of

applications in public spaces.

Maxos

Light-line systems

3 4

Philips indoor luminaires 8.7

Light-line systems

Maxos

Suspension brackets in

silver and white

Trunkings in

silver and white

4MX656...2x

(double wiring)

2x5-wire 2.5 mm
2x7-wire 2.5 mm

4MX691

Maxos TL5

2

2

4MX656

5-wire 1.5 mm
7-wire 1.5 mm
5-wire 2.5 mm
7-wire 2.5 mm

Projector connection

Maxos bus bar system for TL5 and TL-D

4MX056...BB

(bus bar)

2

2

2

2

Bus bar/5-wire 2.5 mm
Bus bar/7-wire 2.5 mm

4MX691...BB

2

2

4MX091...BB

(bus bar)

Electrical units in

silver and white

Reectorsand

mirror inlays

Louvers and optics

1-lamp TL5

2-lamp TL5
1-lamp TL5 EL
2-lamp TL5 EL

Electrical units with 3C track

and bus bar adapter units

4MX692...F 4MX692...D/C

Facetted reector

- slotted

- standard

Aluminum reector

- narrow beam

- wide beam

- medium beam

- ‘double asymmetrical beam

- asymmetrical beam

- very narrow beam

4MX693...D6 4MX693...M2

Semi-high-gloss optic

- wide-beam optic

- narrow-beam optic
White louver

Prismatic optic

Aluminum proled louver

Bus bar/1-lamp/TL5
Bus bar/2-lamp/TL5

4MX692...T

Trapeze reector

- without mirror

- with medium-beam mirror

- with narrow-beam mirror

- perforated without mirror

- slotted without mirror

4MX693...L

White louver

Bus bar/1-lamp/TL-D
Bus bar/2-lamp/TL-D

Light-line systems

Philips indoor luminaires8.8

Maxos

9MX056

4MX056

5-wire 1.5 mm
7-wire 1.5 mm
5-wire 2.5 mm
7-wire 2.5 mm

Projector connection

Maxos TL-D / IP20 / IP40

(double wiring)

2

2

2

2

4MX056...2x

2x5-wire 1.5 mm
2x7-wire 1.5 mm
2x5-wire 2.5 mm
2x7-wire 2.5 mm

4MX091

2

2

2

2

SDW-T /

CDM-T units

4MX056 A.../M...E...

Extended trunkings

5-wire 1.5 mm

2

/300 mm

600 mm

4MX013 4MX014...IP63

4MX014...IP63

Maxos TL-D IP64

4MX056...IP64

White only
7-wire 1.5 mm
5-wire 2.5 mm
7-wire 2.5 mm

4MX091...IP64

Light-line systems

2

2

2

Electrical units with 3C track

4MX092...T

Trapeze reector

- without mirror

- with wide-beam mirror

- with narrow-beam mirror

- perforated without mirror

- ‘wall washer’

- slotted without mirror

4MX093...L

White louver

Silver louver

1-lamp TL-D

2-lamp TL-D
1-lamp TL-D EL
2-lamp TL-D EL

2-lamp TL-D FSG32 mm

4MX092...F

Facetted reector

- without mirror

- with wide-beam mirror

- with asymmetrical beam

- slotted without mirror

4MX093...

L/PL/C6/D6

Semi-high-gloss optic

- narrow-beam optic

mirror

White louver

Prismatic optic

- wide-beam optic

CDM-T lamp
SDW-T lamp

Includes facetted reector

4MX092...D/C/Wing

Aluminum reector

- narrow beam

- wide beam

- asymmetrical beam

- very narrow beam

- wide beam / perforated

Wing optic reector/indirect

White only

1-lamp TL-D
2-lamp TL-D

1-lamp TL5
2-lamp TL5

1-lamp TL-D

2-lamp TL-D
1-lamp TL-D EL
2-lamp TL-D EL

1-lamp TL-D FF-sign
2-lamp TL-D FF-sign

4MX092...IP64

Trapeze reector

Philips indoor luminaires 8.9

Light-line systems

Maxos

Fast and smooth
installation

Maxos can be quickly and easily set up by

installers of all ability levels, thanks to its clearly

denable components and simple click together

assembly.

A variety of suspension brackets can

be clicked into place along the trunking

groove.

The two trunkings are connected via

a sturdy coupler. Then the prewired

5- or 7-pole electrical connections

can be manually connected.

The gear units are secured in the

trunking via a two-way turnable clip,

simply click them into place. The locks

are made of steel.

Reectors are tted onto the same

mounting points as the gear units.

Louvers and optics can be easily put in

place, enabling easy relamping.

Light-line systems

Philips indoor luminaires8.10

Resolutie te laag

Maxos

Light-line systems

Philips indoor luminaires 8.11

Light-line systems

Maxos

Maxosaluminumreectorsandoptics

The aluminum reectors for TL5 and TL-D lamps are optimized

for applications in supermarkets, shops, distribution centers and

industry. They are made of high-quality aluminum and are available for

electrical units holding 1 or 2 TL5 or TL-D lamps. A semi-high-gloss

(D) aluminum reector is available for wide-beam, medium-beam,

narrow-beam, asymmetrical beam and (double-) asymmetrical-beam

light distributions. For very narrow beams a high-gloss (C) aluminum

reector is available. For TL-D, a perforated decorative high-gloss

aluminum reector in wide beam can be ordered.

TL5 aluminum reectors can be equipped with aluminum louvers with

proled lamellae (M2) or with a simple white steel louver (L) for glare

reduction.

All the reectors are xed to the electrical unit via a simple click. They

can be connected to each other in a line by means of an overlap; for

the TL5 versions, additional coupling pieces (9MX056 CP/TL5) are

available as an option. Also for the TL5 versions, decorative end-plates

for the beginning and end of the light-line are available as accessories.

Maxos TL5

Aluminum reectors and optics

Type 4MX692 (TL5 reector)

4MX693 (TL5 louver/optic)

Suitable electrical unit For 1 and 2 TL5 35, 49, 54 and 80 W versions

Material and light

distribution

Accessory Aluminum reector end caps (9MX056 EP/TL5 SI

Remarks Optics and louvers are suitable for 1- and 2 lamp

Main applications Retail (e.g. food, fashion)

Reector:

Semi-high gloss aluminum (D), narrow beam

(-NB)

Semi-high gloss aluminum (D), medium beam

(-MB)

Semi-high gloss aluminum (D), wide beam

(-WB)

Semi-high gloss aluminum (D), asymmetric beam

(-A)

Semi-high gloss aluminum (D), double

asymmetric beam (-DA)

High gloss aluminum (C), very narrow beam

(-NB)

Louver:

Aluminum with proled lamelae (M2)

Steel, white coated (L-D WH)

/ WH)*, coupling pieces (9MX056 CP/TL5) *not

for C-NB reector

versions

Maxos TL-D

Aluminum reectors

Type 4MX092

Suitable electrical unit For 1 and 2 TL-D 36 and 58 W* versions

Material and light

distribution

Remarks *2-lamp versions of aluminum reectors to

Main applications Industry, logistics, retail

Semi-high gloss aluminum (D), narrow beam (-NB),

1- and 2-lamp

Semi-high gloss aluminum (D), wide beam (-WB),

1- and 2-lamp

Semi-high gloss aluminum (D), asymmetrical beam

(-A), 1- and 2-lamp

High gloss aluminum (C), very narrow beam (-NB),

1-lamp

High gloss aluminum, perforated (CP), wide beam

(-WB), 1-lamp

be used with dedicated electrical unit (with

lampholder F32 mm)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Philips indoor luminaires8.12 Light-line systems

TL5 TL-D

Maxos

Maxos 4MX692 TL5 aluminum

reector with semi-high-gloss mirror,

available for narrow-, medium-,

wide-beam, asymmetrical and double

asymmetrical light distribution (D-NB/

D-MB/D-WB/D-A/D-DA)

Maxos 4MX692 TL5 aluminum

reector with high-gloss mirror for

very narrow-beam light distribution

Maxos 4MX692 TL5 aluminum

reector for narrow, medium, wide,

asymmetrical or double-asymmetrical-

beam light distribution, with aluminum

optic with proled lamellae (4MX693

M2) or white lamellae louver (4MX693

L-D)

Maxos 4MX092 TL-D aluminum

reector for 1-lamp electrical unit with

a semi-high-gloss mirror for narrow or

wide-beam light distribution (D-NB/D-

WB) or a high-gloss mirror for narrow-

beam light distribution (C-NB)

Light-line systems

Maxos 4MX092 TL-D perforated

aluminum reector for wide-beam light

distribution and upward lighting

Maxos 4MX092 TL-D aluminum

reector for 2-lamps electrical units

with 32 mm lamp holder (F32)

Philips indoor luminaires 8.13

Light-line systems

Maxos

Maxosfacettedreectorsandoptics

Facetted reectors for TL5 and TL-D give shops and ofces a high-

class appearance.

They are made of steel, with a white or silver coating, and are available

for electrical units holding 1 or 2 TL5 or TL-D lamps.

The facetted reector can be integrated with a semi-high-gloss (D6)

OLC optic of high-quality aluminum. This optic has parabolic side

reectors and parabolic lamellae, and it can create either a medium

beam (with an integrated white top reector) or a narrow beam (with

an integrated mirror top reector). Moreover, a prismatic acrylic cover

(P) and a white steel louver (L-F) are also available.

End-plates for the beginning and end of the light-line are available as

accessories.

Maxos TL5

Facetted reectors and optics

Type 4MX692 (TL5 reector)

4MX693 (TL5 louver/optic)

Suitable electrical unit For 1 and 2 TL5 35, 49, 54 and 80 W versions

Material and light

distribution

Installation Click-in xation on electrical unit

Accessory Facetted reector end caps (9MX056 EP-F WH/

Remarks Reectors and optics are suitable for 1- and 2

Main applications Ofces, schools, cash areas in shops

Reector:

Steel, facetted (F) in white (WH) or silver (SI)

Reector option:

Steel, facetted (F) with high-gloss aluminum

mirror, wide beam (-WB)

Steel, facetted (F) with high-gloss aluminum

mirror, asymmetrical beam (-A)

Optic:

Semi-high gloss, high-quality aluminum, (D6),

wide beam (-WB)

Semi-high gloss, high-quality aluminum, (D6),

narrow beam (-NB)

Cover:

PMMA prismatic cover (P)

Louver:

Steel lamellae, white (L-F WH)

SI), facetted reector coupling pieces (9MX056

CP-F WH/SI)

lamp versions

Maxos TL-D

Facetted reectors and optics

Type 4MX092 (TL-D reector)

4MX093 (TL-D louver/optic)

Suitable electrical unit For 1 and 2 TL-D 36 and 58 W* versions

Material and light

distribution

Installation Click-in xation on electrical unit

Accessory Facetted reector end caps (9MX056 EP-F WH/

Remarks *2-lamp versions of facetted reectors to be used

Main applications Ofces, schools, cash areas in shops

Reector:

Steel, facetted (F)

Steel, facetted (F) with high gloss aluminum

mirror, wide beam (-WB)

Steel, facetted (F), with high gloss aluminum

mirror, asymmetrical beam (-A)

Reector option:

Steel, facetted (F) with symmetrical beam, direct/

indirect (F-S-D/I)

Louver:

Semi-high gloss, high-quality aluminum, (D6),

wide beam (-WB)

Semi-high gloss, high-quality aluminum, (D6),

narrow beam (-NB)

PMMA prismatic cover (P)

Steel lamellae, white (L-F WH)

SI), facetted reector coupling pieces (9MX056

CP-F WH/SI)

with dedicated electrical unit (with lampholder

F32 mm)

Reectors and optics are suitable for 1- and 2-

lamp versions

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Light-line systems

Philips indoor luminaires8.14

TL5 TL-D

Maxos

Maxos 4MX692 TL5 facetted reector,

also for wide or asymmetric-beam light

distribution (F/F-WB/F-A)

Maxos 4MX692 TL5 slotted facetted

reector with direct/indirect light

distribution (F-S-D/I); a version for

emergency lighting is also available

(F-S-D/I-EL)

Maxos 4MX692 TL5 facetted reector,

for wide or asymmetric-beam light

distribution with OLC semi-high-gloss

high-quality aluminum optic with 3D

lamellae (4MX693 D6)

Maxos 4MX092 TL-D facetted

reector, also for wide or asymmetric-

beam light distribution (F/F-WB/F-A)

Light-line systems

Maxos 4MX092 TL-D slotted facetted

reector with direct/indirect light

distribution (F-S-D/I); a version for

emergency lighting is also available

(F-S-D/I-EL)

Maxos 4MX092 TL-D facetted

reector, for wide or asymmetric-beam

light distribution, with OLC semi-high-

gloss high-quality aluminum optic with

3D lamellae (4MX093 D6)

Maxos 4MX692 TL5 facetted reector

with prismatic refractor (4MX693 P)

Maxos 4MX692 TL5 aluminum

reector with semi-high-gloss mirror

for narrow, medium, wide, asymmetrical

or double-asymmetrical-beam light

distribution, with lamellae louver for

facetted reector (4MX693 L-F)

Maxos 4MX092 TL-D facetted

reector with prismatic refractor

(4MX093 P)

Maxos 4MX092 TL-D facetted

reector, for narrow or wide-beam

light distribution, with a lamellae louver

for facetted reector (4MX093 L)

Philips indoor luminaires 8.15

Light-line systems

Maxos

Maxostrapezereectorsandoptics

The sturdy trapeze reectors for TL5 and TL-D are designed primarily

for applications in industry, supermarkets and shops. They are made of

steel with a white or silver outer nish. The reectors are optimized

for electrical units holding 1 or 2 TL5/TL-D lamps and provide an

excellent light output ratio.

There are basic trapeze reectors without an additional mirror inlay

and trapeze reectors with dedicated aluminum mirror inlays. These

are designed for wide-beam, narrow-beam and asymmetrical wall-

washing light distributions. Moreover, perforated and slotted trapeze

reectors (without mirror inlays) can be ordered for design reasons or

to create an indirect uplighting effect. For glare reduction, the trapeze

reector can be equipped with a steel louver.

Maxos TL5

Trapeze reectors and optics

Type 4MX692 (TL5 reector)

4MX693 (TL5 louver/optic)

Suitable electrical unit For 1- and 2 TL5 49, 54 and 80 W versions

Material and light

distribution

Installation Click-in xation on electrical unit

Accessory Trapeze reector end caps (9MX056 EP1-T WH/

Remarks Reectors and optics are suitable for 1- and 2-

Main applications Retail and general industry

Reector:

Steel, trapeze (T)

Steel, trapeze (T) with high gloss aluminum

mirror, medium beam (-MB)

Steel, trapeze (T) with high gloss aluminum

mirror, narrow beam (-NB)

Reector option:

Slotted, direct/indirect (T-S-D/I) or perforated

(T-P)

Louver:

Steel lamellae, white (L-T WH)

SI)

lamp versions

Emergency lighting, for TL-D only

If emergency lighting by means of separately connected orientation

light units (E27-sockets) is required, special trapeze reectors with a

bigger cut-off must be used. The length of this reector corresponds

to that of the 58 W trunking length. A 36 W electrical unit plus the

orientation light unit will ll this length.

Maxos TL-D

Trapeze reectors and optics

Type 4MX092 (TL-D reector)

4MX093 (TL-D louver/optic)

Suitable electrical unit For 1 and 2 TL-D 36 and 58 W versions

Material and light

distribution

Installation Click-in xation on electrical unit

Accessory Trapeze reector end caps 1 and 2-lamp version

Remarks * For 1-lamp version only

Main applications Retail and general industry

Reector:

Steel, trapeze (T)

Steel, trapeze (T), with high gloss aluminum

mirror, wide beam (-WB)

Steel, trapeze (T), with high gloss aluminum

mirror, narrow beam (-NB)

Steel, trapeze (T), with high gloss aluminum

mirror, asymmetrical half reector (-A)*

Steel, trapeze (T), with high gloss aluminum

mirror, asymmetrical wallwasher (TI-A)*

Reector option:

Slotted, direct/indirect (T-S-D/I) or perforated

(T-P)

Optic and louver:

Steel lamellae, white (L-T WH) or silver (L-T SI)

(9MX056 EP1-T WH/SI, 9MX056 EP2-T WH/SI)

Dedicated reectors for 1- and 2-lamp TL-D

versions

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Light-line systems

Philips indoor luminaires8.16

TL5 TL-D

Maxos

Maxos 4MX692 TL5 trapeze reector,

also for narrow or wide-beam light

distribution (T/T-NB/T-WB)

Maxos 4MX692 TL5 perforated

trapeze reector (T-P)

Maxos 4MX692 TL5 trapeze reector,

for narrow or wide-beam light

distribution, with a lamellae louver for

trapeze reector (4MX693 L-T)

Maxos 4MX092 TL-D perforated

trapeze reector

Light-line systems

Maxos 4MX092 TL-D trapeze reector,

for narrow or wide-beam light

distribution, with lamellae louver for

trapeze reector (4MX093 L-T)

Maxos 4MX092 TL-D trapeze reector,

also for narrow or wide-beam light

distribution (T/T-NB/T-WB)

Maxos 4MX692 TL5 slotted trapeze

reector (T-S-D/I)

Maxos 4MX092 TL-D trapeze reector,

also for narrow or wide-beam light

distribution (T/T-NB/T-WB)

Maxos, 4MX092 TL-D asymmetrical

trapeze reector

Philips indoor luminaires 8.17

Light-line systems

Maxos

Maxos TL-D Wing optic

The Wing optic is a reector solution creating soft indirect light,

without glare, and is ideal for ofce and shop applications. Designed

for electrical units holding 1 or 2 TL-D lamps, it is made of white

powder-coated steel and a perforated curved sheet conceals the

lamps. The 2-lamp version must be used with special electrical units

(lamp holder F32 mm).TL5 solutions are available on request.

The Wing optic is xed to the electrical unit via a simple click-in. The

reectors can be connected to each other without additional coupling

pieces, as they are delivered with an integrated connection side at one

end of the reector. Decorative end-plates for the beginning and end

of the light-line are available as accessories.

Maxos TL-D

Wing optic

Type 4MX092 WG

Suitable electrical unit For 1 and 2 TL-D 36 and 58 W* versions

Material Steel, white coated (WH)

Installation Click-in xation on electrical unit

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Accessory End plates (9MX056 EP-WG)

Remarks *2-lamp versions of the Wing optic to be used

Main applications shops, ofces

with dedicated electrical unit (with lampholder

F32 mm)

Light-line systems

4MX092 WG Wing optic

Philips indoor luminaires8.18

Maxos

Light-line systems

Philips indoor luminaires 8.19

Light-line systems

Maxos

Maxos electrical units

The electrical units for Maxos trunking sections can hold 1 or 2

TL5 or TL-D lamps and are designed for quick and reliable click-in

mounting. They are made of steel with a white or silver coating.

The electrical units can be equipped with HFP electronic ballasts, HFR

dimming ballasts (allowing light output of a TLD-lamp to be regulated

from 3 to 100%), HF-DALI ballasts or low-loss conventional ballasts.

HFR and HF-DALI units must be mounted to 7-wire trunking sections.

The conventional ballasts are available parallel compensated (IC) or

inductive (I).

Special electrical units equipped with an emergency battery pack for

1 or 3 hours (EL1/EL3) are available. These units must be used with

7-wire trunking sections. If trunkings with double wiring are used, one

at ribbon cable will be connected to the central battery. This provides

a completely separate emergency lighting circuit.

Some 2-lamp TL-D reectors need dedicated electrical units (F32)

with a short distance between the lamps. On request, the TL-D

electrical units can be upgraded from IP20 to IP40 with an IP40 set

that is available as an accessory.

Maxos TL5

Electrical units

Type 4MX691

Lamp Fluorescent:

1 x or 2 x MASTER TL5 / G5 / 35, 54, 49, 80 W

Gear Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

High Frequency Regulator (HFR)

High Frequency Regulator, DALI (HFD)

Option Emergency lighting:

1 hour (EL1)

3 hours (EL3)

Material Sheet steel in white (WH) or silver (SI)

Installation Click-in xation (mechanical and electrical) on

trunking

Maxos TL-D

Electrical units

Type 4MX091

Lamp Fluorescent:

1 x or 2 x MASTER TL-D / G13 / 36, 58 W

Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:

Inductive, parallel compensated (IC)

Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

High Frequency Regulator (HFR)

High Frequency Basic (HF-Dali)

Option Emergency lighting:

1 hour (EL1), 3 hours (EL3)

2-lamp lampholder of 32 mm (F32) to be used in

facetted and aluminum reectors, standard is 115

mm

Master/slave unit: pair of electrical units one with

gear (M) one without gear (S)

Material Sheet steel in white (WH) or silver (SI)

Installation Click-in xation (mechanical and electrical) on

trunking

Remarks Dedicated IP40 sets for upgrading from IP20 to

IP40

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Light-line systems

Philips indoor luminaires8.20

TL5 TL-D

Maxos

Maxos 4MX691 TL5 1-lamp

electrical unit

Maxos 4MX691 TL5 2-lamp

electrical unit

Maxos 4MX091 TL-D 1-lamp

electrical unit

Light-line systems

Maxos 4MX091 TL-D 2-lamp

electrical unit

Maxos 4MX091 TL-D 2-lamp

electrical unit; 32 mm lamp holders

(F32) enable smaller solutins using

1/2-lamp reectors.

Philips indoor luminaires 8.21

Light-line systems

Maxos

Maxos standard trunking

The trunking fulls two functions: rst, it provides a sturdy in-line

mounting rail on which to x the electrical units, and second, it

provides a housing for the electrical cables that bring power to the

units. All the trunking sections are made of hot-dip galvanized steel

with a white or silver nish and available in lengths of 1, 2 and 3

electrical units 36 W and 58 W.

A at ribbon cable (5 or 7 wires) or two at ribbon cables (2 x 5

or 2 x 7 wires) are integrated in the trunking and guarantee (in

combination with an integrated phase selection switch and contact

blocks) safe and correct cabling. The 7-wire cable is used to integrate

light regulation or emergency lighting for those electrical units that are

equipped with emergency battery packs. Double wiring (2 x 5 or 2 x 7

wires) is needed to provide a completely separate mains supply to the

electrical units. Double wiring is mostly used for emergency lighting

by central emergency batteries or separate switching. Hence, no extra

contact blocks or wiring are required.

For suspended light-lines, the trunking sections are connected using

the integrated electrical connector and a sturdy external mechanical

coupling piece (accessory). Surface-mounted light-lines use the same

integrated electrical connector and an internal coupler (accessory).

On the upper part of the trunking section, special knock-out openings

enable cable entry wherever needed.

The trunking is available with a complete range of interchangeable

components that optimize exibility. The outstanding stability of the

sections and coupling pieces allows suspension intervals of 3.4 to 5 m

(TL5) / 4.8 m (TL-D).

Maxos TL5

Standard trunkings

Type 4MX656

Length 1 x,2 x or 3 x length of electrical unit 49 W (491,

492 or 493), for 80 and 35 W electrical units as

well

1 x,2 x or 3 x length of electrical unit 54 W (541,

542 or 543)

Electrical circuit option 1 x or 2 x at ribbon cable, 5 or 7 wires:

1 x or 2 x 5 x 1.5 or 2.5 mm² (1x5x2.5 etc)

1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)

Material Hot-dip galvanized steel in white (WH) or silver

(SI)

Accessory Trunking end piece, mains connection, tr unking

coupling pieces, etc. (see chapter Maxos

accessories)

Remarks 7-wire cable for integration of light regulation or

emergency lighting

Double wiring for emergency lighting by central

emergency batteries or separate switching

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Type 4MX056

Length 1 x, 2 x or 3 x length of electrical unit of 58 W

Electrical circuit option 1 x or 2 x at ribbon cable, 5 or 7 wires:

Material Hot-dip galvanized steel in white (WH) or silver

Accessory Trunking end piece and mains connection set

Remarks 7-wire cable for integration of light regulation or

Maxos TL-D

Standard trunking

(581, 582 or 583) or 36 W (361, 362 or 363)

1 x or 2 x 5 x 1.5 or 2.5 mm² (1x5x2.5 etc)

1 x or 2 x 7 x 1.5 or 2.5 mm² (1x7x2.5 etc)

(SI)

(9MX056 EP SET), trunking coupling pieces etc.

(see chapter Maxos accessories)

emergency lighting

Double wiring for emergency lighting by central

emergency batteries or separate switching

Light-line systems

Philips indoor luminaires8.22

TL5/TL-D

Maxos

Maxos 4MX656 TL5 and

4MX056 TL-D standard trunking

section with 5-wire at ribbon cable

(5x1.5/5x2.5)

Maxos 4MX656 TL5 and

4MX056 TL-D standard trunking

section with two 5-wire at ribbon

cables (2x5x1.5/2x5x2.5); to create

different zones in an application or use

central emergency systems

Maxos 4MX656 TL5 and

4MX056 TL-D standard trunking

section with 7-wire at ribbon cable

(7x1.5/7x2.5); for dimming (1-10 V),

DALI or emergency lighting with local

battery

Light-line systems

Maxos 4MX656 TL5 and

4MX056 TL-D standard trunking

section with two 7-wire at ribbon

cables (2x7x1.5/2x7x2.5); to create

different lighting zones with dimming or

separate emergency lighting

Philips indoor luminaires 8.23

Light-line systems

Maxos

Maxos projectors and HID solutions

Accent lighting is part of the integral concept of Maxos. The lightlines

can be equipped with almost the full range of different projectors next

to all the reector solutions based on TL5 and TL-D uorescent lamps.

Often in specic areas of shops projectors are requested in addition

to uorescent general lighting.

For Maxos trunkings with at ribbon cable (5 x 2.5, 7 x 2.5), units with

integrated 3C-rail are available. These units can be clicked into the

trunking sections like a regular electrical unit.

Projectors with a 3C adapter can be xed to the system. These can

be xed to the trunking similar to a regular electrical unit. 4MX013

facetted reector units with HID lamps are often used to illuminate

fruit and vegetables in supermarkets.

The electrical components are integrated in a white-coated housing

with the shape of a facetted reector. The lengths of these units

correspond to those of the 36 W trunking.

End-plates for the beginning and the end of the light-line are available

as accessories.

Type 4MX013

Facetted reector with HID-lamp units

Suitable trunking unit For trunking with at ribbon cable (5/7 wires),

length of electrical unit 36 W (361), other lengths

available on request

Light source 1-lamp or 2-lamp version:

HID:

1 x or 2 x MASTER SDW-T / PG12-1 / 50,

100 W

1 x or 2 x MASTERColour CDM-T / G12 /

70 W

Double lamp version:

1 x MASTER SDW-T / PG12-1 / 50 W and 1 x

MASTERColour CDM-T / G12 / 35 W

1 x MASTER SDW-T / PG12-1 / 100 W and 1 x

MASTERColour CDM-T / G12 / 70 W

Gear Electro magnetic (low loss), 230 V / 50 Hz:

Parallel compensated (IC)

Material Steel, white-coated, shape of a facetted reector

(F)

Installation Turning bolt xation (mechanical and electrical) on

trunking

Accessory Decorative end-plates

Main applications Retail (e.g. food, fashion)

Type 4MX094

3C units for projectors

Suitable trunking and

projectors

Length Length of electrical unit 58 W (581) or 49 W

Projector xation 3-circuit power track adapter (3C)

Material Sheet steel, white (WH) or silver (SI)

Installation Click-in xation (mechanical and electrical) on

Main applications Retail (e.g. food, fashion)

For trunkings with at ribbon cable (5/7 wires) to

x projectors with 3C adapter

(491)

trunking

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Maxos 4MX013 HID-lamp units

Light-line systems

Maxos 4MX094 unit with integrated

3C rail and projector with 3C adapter

Philips indoor luminaires8.24

Type 4MX091

Projector adapter for Bus bar system

Suitable trunking and

projectors

Length 600 mm

Material Sheet steel, white (WH) or silver (SI)

Installation Click-in xation (mechanical and electrical) on

Main applications Retail (e.g. food, fashion)

For trunkings with Bus bar system only, to x

specic projectors with ceiling base plate

trunking. Most Philips projectors, versions with

ceiling base plate - can be xed by screwing the

base plate to the projector adapter units

Maxos

Maxos TL-D extended trunking

The extended trunking sections are made of hot-dip galvanized steel

with a white or silver nish. They are available in lengths of 1 and 2

electrical units of 58 W. Extensions of 300 and 600 mm in the middle

only (M), or in the middle and at the end of these trunking sections

(ME), allow interrupted lines where the gaps between the electrical

units correspond to the extended trunking length. The gaps can be

lled by blind covers, available as accessories.

A at ribbon cable (5 wires) is integrated in the trunking and

guarantees (in combination with an integrated phase selection switch

and contact blocks) safe and correct cabling.

For suspended light-lines, the trunking sections are connected using

the integrated electrical connector and a sturdy external mechanical

coupling piece (accessory). Surface-mounted light-lines use the same

integrated electrical connector and an internal coupler (accessory).

On the upper part of the trunking section, special knock-out openings

enable cable entry wherever needed.

Maxos TL-D

Extended trunking

Type 4MX056

Length 1 x or 2 x length of electrical unit 58 W (581 or

582)

Electrical circuit option Flat ribbon cable, 5 or 7 wires

Others on request

Extention length 300 and 600 mm in the middle (M), or in the

middle and at the end (ME)

Material Hot-dip galvanized steel in white (WH) or silver

(SI)

Accessory Trunking end piece and mains connection set

(9MX056 EP SET), trunking coupling pieces etc.

(see chapter Maxos accessories)

Light-line systems

Maxos 4MX091 projector adapter Maxos 4MX056 TL-D extended

trunking section M300/E300/M600/

E600 and blind cover, used to close

the spaces in the trunking where no

electrical units are mounted; available in

white or silver

Philips indoor luminaires 8.25

Light-line systems

Maxos

Maxos TL-D IP64 trunking sections

The IP64 trunking sections are made of hot-dip galvanized steel with

a white powder coating. They are available in lengths of 1, 2 and 3

electrical units 36 W and 58 W. Special seals between the sections and

waterproof trunking end-pieces are used (to be ordered separately).

A at ribbon cable (5 or 7 wires) is integrated in the trunking and

guarantees (in combination with an integrated phase selection switch

and contact blocks) safe and correct cabling. The 7-wire cable is used

to integrate light regulation or emergency lighting for those electrical

units that are equipped with emergency battery packs. Hence, no extra

contact blocks or wiring need to be installed.

For suspended light-lines, the trunking sections are connected using

the integrated electrical connector and a sturdy external mechanical

coupling piece (accessory). Surface-mounted light-lines use the same

integrated electrical connector and an internal coupler (accessory).

On the upper part of the trunking section, special knock-out openings

enable cable entry wherever needed.

The IP64 trunking can be equipped with special IP64 electrical units

and different reectors.

The outstanding stability of the sections and coupling pieces allows

suspension intervals of 3.4 to 4.8 m.

Maxos TL-D

IP64 Trunking

(to be used with IP64 electrical unit only)

Type 4MX056

Length 1 x, 2 x and 3 x length of electrical unit 36 and

58 W

Wiring (1.5 or 2.5 mm²) Standard 5 pole (5x1.5 or 2.5)

Standard 7 pole for dimming (7x1.5 or 2.5)

Option Double wiring (for additional functionality)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Maxos 4MX056 TL-D IP64 trunking

section

Material Hot-dip galvanized steel, coated white (WH)

Accessory Trunking end pieces and mains connection set

Remarks Not for permanent wet conditions, corrosion

(9MX056 EP IP64 SET), gasket between trunkings

(9MX056 GK IP64), blind cover (9MX056

BC36/58 IP64), PC procetion tube

possible over time

Two trunking end caps including 1

electrical connector

Light-line systems

Blind cover IP64, white Gasket between trunking sections

Philips indoor luminaires8.26

Maxos TL-D IP64 electrical units

The IP64 electrical units are designed for quick and reliable mounting

in Maxos IP64 trunking sections. They are made of steel with a white

powder nish.

The high IP classication is possible due to special seals between the

trunking sections and to lamp holders with gasketted screw rings on

the IP64 electrical units. Maxos IP by is not designed for applications in

regular humid environments.

A connector block is mounted for electrical connection to the

trunking. The electrical units are equipped with electronic ballasts

(including dimmable and DALI) or low-loss conventional ballasts. The

conventional ballasts are available as parallel compensated (IC) or

Maxos

inductive (I). The units can hold 1 or 2 TL-D lamps.

Dimmable versions are delivered with HF-R electronic ballast,

allowing the light output of the TL-D lamps to be regulated from 3 to

100%. HF-R and HF-DALI units must be mounted to 7-wire trunking

sections.

The electrical units can be combined with dedicated IP64 trapeze

reectors and a selection of aluminum reectors. These aluminum

reectors offer a choice of narrow-beam, asymmetrical-beam and

very-narrow-beam light distributions for 1 x 58 W. Units which comply

with the FF rules (limited surface temperature) are available on request.

Special electrical units equipped with an emergency battery pack for

1 or 3 hours (EL1/EL3) are available. These units must be used with

7-wire trunking sections.

Light-line systems

Maxos TL-D

IP64 Electrical units

(to be used with IP64 trunking only)

Type 4MX091

Lamp Fluorescent:

1 x or 2 x MASTER TL-D / G13 / 36, 58 W

Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:

Inductive (I)

Inductive, parallel compensated (IC)

Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

High Frequency Regulator (HFR)

Option Emergency lighting:

1 hour (EL1), 3 hours (EL3)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Material Sheet steel in white (WH)

Accessory Protection tube

Remarks Not for permanent wet conditions, corrosion

possible over time

To be used with standard trapeze reectors

(1-lamp) or dedicated IP64 trapeze reectors

(2-lamp) or dedicated aluminum reectors (on

request)

Maxos 4MX091 TL-D IP64 1-lamp

electrical unit

Philips indoor luminaires 8.27

Maxos 4MX091 TL-D IP64 2-lamp

electrical unit

Light-line systems

Maxos

MaxosTL-DIP63closedreectorunits

Maxos IP63 closed reector units are ready-to-install dedicated

luminaires for the Maxos trunking system. They are designed for

industrial applications requiring good protection of reectors against

dust, in particular the automotive industry and food industry. The unit

can be easily cleaned with a wet cloth.

The housing is made of steel with a white coating, while the cover is

made of tempered glass or, optionally, polycarbonate (PC); the inner

reector is made of aluminum.

Maxos IP63 closed reector units combine the functions of Maxos

electrical units, reectors and covers. They are designed for reliable

mounting on Maxos trunking sections in TL-D lengths. A connector

block is mounted on top of the units for electrical connection to the

trunking. Mechanical connection is realized by means of a safe bracket

with knee-lever clasp around the trunking. IP63 classication is valid

for the complete lamp, optical and ballast compartment; however, the

classication for the total system including IP20 trunking sections is

IP20.

The standard range is 1-lamp and 2-lamp TL-D 58 W with HF or

conventional ballast and TL5 80 W with HF ballast, all to be mounted

on the TL-D Maxos trunking system, optionally with EL3 emergency

lighting.

The units come with inner aluminum reectors for wide-beam (WB)

or asymmetrical-beam (A) light distribution. White louvers (4MX093

1/2 58 L-IP63-unit WH) are available as accessories.

Please note that Maxos is not designed for application in regular humid

environments.

Maxos TL-D

IP63 Reector unit

Type 4MX014

Lamp Fluorescent:

1 x or 2 x MASTER TL-D / G13 / 58 W or 1x

or 2x TL5 80 W

Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:

Inductive, parallel compensated (IC)

Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

Reector Wide beam (-WB)

Asymmetric (-A)

Option Emergency lighting: 3 hours (EL3)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Maxos 4MX014 IP63 closed reector

unit

Material Housing: steel, white coated

Accessory Steel, white inlay louver (4MX093 1/2/58 L-IP63-

Remarks The electrical connection to the trunking is realized

Main applications Industry: automotive and food (cleanable front

Cover: tempered glass (GT) or polycarbonate

(PC) (optional)

unit WH)

via a pre-mounted connector block, the mechanical

connection via a bracket with knee-lever clasp

around the trunking

IP63 for optical compartment inclusive lamp- and

ballast compartment only, can be used with regular

IP20 at ribbon trunkings

screen)

Maxos 4MX014 IP63 closed reector

unit with louver

Light-line systems

Philips indoor luminaires8.28

Maxos

Light-line systems

Philips indoor luminaires 8.29

Light-line systems

Maxos

Accessories

Bracket for direct ceiling mounting;

available in white or silver

Chain bracket, adjustable; white or

silver

Chain bracket, xed; white, silver or

galvanized

Mounting bracket including suspension

tube, 1250 mm; available in white or

silver

Mounting bracket including suspension

wire, 1250/3000 mm; available in white

or silver (MB-SW-L1250/MB-SW-

L3000)

Prole bracket for exposed T-proles;

available in white or silver

Mounting bracket for suspension wire;

available in white or silver

Suspension wire, diameter 2 mm; per

meter

Light-line systems

Ceiling cover and suspension wire,

1250 mm; available in white or silver

Ceiling xation with steel wire, 1250

mm; white, silver or zinc

Philips indoor luminaires8.30

Accessories

Flexible coupling joint; coupling piece

to connect exible coupling joint to the

trunking

Maxos

Blind cover, used to close the spaces in

the trunking where no electrical units

are mounted; available in white or silver

Light-line systems

End-piece set for trunking with mains

supply; available in white or silver

Coupling piece for trunking; available in

white or silver

IP40 set to upgrade TL-D electrical

units (1-lamp) from IP20 to IP40

Electrical supply connector, 7-pole; 10

pieces

Internal coupling piece for surface-

mounted trunking

IP40 set to upgrade TL-D electrical

units (2-lamps) from IP20 to IP40

Philips indoor luminaires 8.31

Light-line systems

TTX400

Philips indoor luminaires8.32 Light-line systems

TTX400 – the value of lighting

Good lighting contributes to our sense of well-being. In typical industrial

environments, the cost-effective TTX400 light-line system helps to increase

productivity, improve quality and safety, and reduce fatigue.

The experience of lighting

The TTX400 light-line system enhances the shopping experience by ensuring a perfect light

distribution in a host of design congurations, keeping the customers’ attention fully focused on

the merchandise.

www.philips.com/lighting

Light-line systems

White lamella louver for medium beam

Ultra-narrow beam reector TL5

Philips indoor luminaires 8.33Light-line systems

and wide beam reectors TL5

Multi-purpose white reector TL-DNarrow beam reector TL-D

TTX400

1 2

Main applications

1 Retail

In retail outlets such as hypermarkets, the TTX400 light-line system with TL5 lamps delivers

high lighting levels, focusing attention on the merchandise and creating a bright, stimulating

shopping atmosphere.

2 Logistics

To increase operating efciency in logistics facilities such as distribution centers and groupage

warehouses, the TTX400 light-line system delivers high horizontal illuminances in open

receipt and dispatch areas and high vertical illuminances on the racks, enhancing the visibility

of the whole rack, from oor to ceiling

Philips indoor luminaires8.34 Light-line systems

3 Industry

The TTX400 light-line system helps to boost operating efciency in industrial facilities by

delivering high lighting levels – which help workers to focus better on the task in hand and

improve safety – while reducing energy consumption and maintenance.

4 Public areas

In public areas, e.g. libraries, the TTX400 light-line system with TL5 lamps delivers high lighting

levels, combined with low glare. This creates a bright, stimulating ambience that minimizes

visual fatigue.

TTX400

Light-line systems

Light-line systems

3 4

2

Philips indoor luminaires 8.35Light-line systems

TTX400

Suspension brackets

Trunkings

Electrical units

Reectors

Inlayreectors

Louvers and optics

Philips indoor luminaires8.36 Light-line systems

ZTX400

TTX400

Light-line systems

TL-DTL5

TTX400 5 wire TTX400 7 wire TTX400 9 wire * TTX400 5 wire TTX400 7 wire

5 x 1.5 mm
5 x 2.5 mm

2

2

2

7 x 2.5 mm

2

7 x 2.5 mm

+ 2 x 1.0 mm

2

5 x 1.5 mm
5 x 2.5 mm

2

2

TMX400 1 49 TMX40. 49TMX400 2 49 TMX400 1 58 TMX40. 58TMX400 2 58

1-lamp TL5

1-lamp TL5 EL3

2-lamp TL5

2-lamp TL5 EL3

- projectors

- halogen spots

1-lamp TL-D

1-lamp TL-D EL3

GMX5.. white GMX5.. aluminum GMX4.. white GMX4.. aluminum

- wide beam

- wide beam

- medium beam

- narrow beam

- ultra narrow beam

- asymmetric beam

- wall washer

- standard

- slotted

- perforated

GGX45. ..GGX555 ..

- narrow beam

- bi-directional

- asymmetrical

- asymmetric

- wide beam

- bi-directional

GGX555

7 x 2.5 mm

2-lamp TL-D

2-lamp TL-D EL3

GGX450

2

- wall washer

- wide beam

TTX400 9 wire *

- very narrow beam

- ultra narrow beam

- asymmetric beam

7 x 2.5 mm

+ 2 x 1.0 mm

- projectors

- halogen spots

- narrow beam

2

2

- white louver

- at proled aluminium

- high gloss parabolic lamella

- matt parabolic lamella

- white louver

- at proled aluminum

- matt parabolic lamellea

- perforated louver

- high gloss parabolic lamella

- semi high gloss parabolic lamella

- prismatic panel

* see new alternative with TMX400 C-2R onto TTX400 7

Philips indoor luminaires 8.37Light-line systems

- mesh louver

TTX400

Just 5 clicks

TTX400 is installed with just 5 click-in actions.

No tools, no screws and no additional movements.

Fast, easy and secure.

Click 1

The trunking is mounted on the

various suspension brackets.

Click 2

Trunkings are connected, mechanically

and electrically in one movement.

Click 3

Electrical unit is mounted.

Click 4

Reector is mounted on the electrical

unit.

Click 5

Connection unit with the power supply

is installed at the beginning of the line.

Philips indoor luminaires8.38 Light-line systems

Linesense

TTX

400

TTX

400

With Linesense, TTX400 and controls are combined in one. The speed and ease

of installation of TTX400 remains when Linesense is used. In addition, substantial

TTX400

energy savings up to 75% can be achieved. Linesense has been developed for

industrial applications like warehouses.

Installation clicks only

1 ZTX400 MDU control unit clicks onto the trunking.

2 Movement detector clicks on the bracket.

3 ZTX400 MB-MDU bracket clicks on the trunking.

4 Telejack cables click the detector and control unit together.

5 ZTX400 CU mains connection clicks on the control unit.

ZTX400 MDU

Pre-wired Linesense unit

with integrated control

function

ZTX400 MB-MDU

Mounting bracket for

movement detector

LRM8117/00

Light-line systems

LRM8117/00

High-bay passive infrared

movement detector

Mounting height up to

15 m

Daylight linking Manual override Movement detection

Switch on/off

or dim to

10, 20, 30%

Best performance Best economy

ZTX400 MDU HFD ZTX400 MDU HFP

Movement detection (detector LRM8117)

Minimum light level without presence 0, 10, 20, or 30% 0

Maximum number of presence detectors per control unit 4 2*

Maximum cable length for movement detector 300 m 125 m

Daylight linking (light sensor LRL8102)

Number of light sensors per control unit 1 -

Manual control

(on, off and override)

Type of ballast HFD*** HFP

Maximum number of ballasts per line 64 **

TTX400 system 7 wire 5 wire

* 2 presence detectors or 3 with LED disabled

** any number of luminaires allowed by the TTX400 light line system

*** HFD=HFR-DALI

-

-

Switch on/off

Linesense consists of a 618 mm piece

of trunking, which is fully pre-equipped

and wired to be added to the trunking.

The control function is integrated into

this extra unit, and can easily be clicked

between the light line and the electrical

connection unit. High bay movement

detectors are connected with standard

RJ-12 cables and mounted at the right

location with the use of dedicated

brackets. Linesense is equipped as

standard with a telejack splitter to

easily connect the detectors to the

light line.

Philips indoor luminaires 8.39Light-line systems

TTX400

TTX400aluminumreectors

These aluminum one-piece reectors for both TL5 and TL-D lamps

are available in hammered, matt and glossy versions. The TL5 ones are

smaller due to the smaller lamps, resulting in easier handling and less

space needed. TTX400 aluminum reectors are specially designed for

applications where a wide beam, narrow beam, very narrow beam

or ultra- narrow beam is required e.g. distribution centeres and

warehouses. Installation is via a simple click-in action to the electrical

units TMX400. The high efciencies of these reectors ensure a highly

cost effective solution. Reector overlapping and mechanical clips

delivered with the reectors enable proper alignment in the event of

continuous lines. All aluminum reectors are available for 49 W and

54 W lengths.

TTX400 TL5

Aluminum reectors

Type GMX565, GMX566, GMX567, GMX570

Suitable electrical unit For 1 and 2 TL5 35/49/80 W and 54/28 W

versions

Material and light

distribution

Installation One click-in action to electrical unit

Remarks All reectors are in one piece

Main applications Retail (e.g. food, fashion), industry, warehouses

GMX565:

matt aluminum, narrow beam (M-NB)

high-gloss hammer-bow aluminum, narrow beam

(HB-NB)

GMX566:

matt aluminum, wide beam (M-WB)

high-gloss hammer-bow aluminum, wide beam

(HB-WB)

high-gloss hammer-bow aluminum, asymmetric

beam (HB-A)

GMX567:

matt aluminum, asymmetric beam (M-A)

GMX570:

high-gloss aluminum, ultra narrow beam (C-NB)

high-gloss hammer-bow aluminum, ultra narrow

beam (HB-NB)

Reectors are suitable for 1- and 2 lamp versions,

GMX566 M-WB and HB-A for 49 W version only

TTX400 TL-D

Aluminum reectors

Type GMX440, GMX460, GMX465, GMX466, GMX467,

GMX470

Suitable electrical unit For 1 and/or 2 TL-D 36 and 58 W versions

Material and light

distribution

Installation One click-in action to electrical unit

Remarks All reectors are of one piece

Main applications Retail (e.g. food, fashion), industry, warehouses

GMX440:

matt aluminum, for general lighting, both 1- and

2-lamp 36 and 58 W version*

GMX460:

high-gloss aluminum, narrow beam (C-NB),

1-lamp 58 W version*

GMX465:

high-gloss hammer-bow aluminum, narrow beam

(HB-NB), 1- and 2-lamp 58 W version*

matt aluminum, narrow beam (M-NB), 1- and

2-lamp 58 W version*

GMX466:

high-gloss hammer-bow aluminum, asymmetrical

(wall washer) beam (HB-A), 1-lamp 58 W

version*

high-gloss hammer-bow aluminum, wide beam

(HB-WB), 2-lamp 58 W version

matt aluminum, wide beam (M-WB), 2-lamp

58 W version

GMX467:

matt aluminum, asymmetrical beam (M-A),

1-lamp 36 and 58 W version*

GMX470:

high-gloss aluminum, very narrow beam (C-NB),

1-lamp 58 W version*

* Also for TMX400 electrical unit, 2-lamp version

with F32 lampholder

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Philips indoor luminaires8.40 Light-line systems

TL5

TTX400

GMX565 one-piece narrow beam

reector made from matt aluminum

GMX566 one-piece wide-beam

reector made of matt aluminum

(M-WB)

GMX566 one-piece asymmetrical

reector made of high-gloss hammered

aluminum

GMX565 one-piece narrow-beam

reector made of hammered aluminum

(HB-NB)

Light-line systems

GMX566 one-piece wide beam

reector made of hammered aluminum

(HB-WB)

GMX567 one-piece asymmetrical

reector made of matt aluminum

(M-A)

GMX570 one-piece narrow beam

reector made of high-gloss aluminum

(C-NB)

GMX570 one-piece narrow-beam

reector made of hammered aluminum

(HB-NB)

Philips indoor luminaires 8.41

Light-line systems

TTX400

TL-D

GMX440 one-piece general-lighting

reector made from matt aluminum

GMX465 one-piece narrow beam

reector made from matt aluminum

GMX466 one-piece wide-beam

reector made from high-gloss

hammered aluminum (HB-WB)

GMX460 one-piece narrow beam

reector made from high-gloss

aluminum

GMX465 one-piece narrow beam

reector made from high-gloss

hammered aluminum

GMX466 one-piece wide-beam

reector made from matt aluminum

GMX466 one-piece wall-washer

reector made from high-gloss

hammered aluminum (HB-A)

GMX470 one-piece narrow-beam

reector made from high-gloss

aluminum (C-NB)

GMX467 one-piece asymmetric beam

reector made from matt aluminum

Philips indoor luminaires8.42 Light-line systems

TTX400

Light-line systems

Philips indoor luminaires 8.43

Light-line systems

TTX400

TTX400multi-purposereectors

These multifunctional one-piece reectors for TL5 and TL-D lamps

are designed for applications requiring high technical lighting quality

and design. They can be extended by the addition of various optics,

mirrors and attachments. Installation is done via a simple click-in on

the electrical units.

TTX400 TL5

Multi-purpose reectors

Type GMX555

Suitable electrical unit For 1 and 2 TL5 35 / 49 / 80 W and 28 / 54 W

versions

Material and light

distribution

Installation One click-in action to electrical unit

Accessory Coupling pieces, end plates

Remarks All reectors are in one piece

Main applications Retail (e.g. food, fashion), industry

Type GMX555

Suitable reectors Multi-purpose reectors GMX555 MB, 35 / 49 /

Material and light

distribution

Installation Clicking into reector

Remarks Mirror inserts delivered mounted in reector

Main applications Retail (e.g. food, fashion)

Steel, pre-lacquered white, wide beam (-WB)

Steel, pre-lacquered white, medium beam (-MB)

Steel, pre-lacquered white, perforated, medium

beam (RP-MB)

Reectors can be equipped with various optics,

mirrors and attachments

TTX400 TL5

Mirror inserts

80 W and 28 / 54 W versions

High-gloss aluminum, medium beam, bi-directional,

max at 20º (MB C-BD20 SET)

High-gloss aluminum, medium beam, bi-directional,

max at 40º (MB C-BD40 SET)

High-gloss aluminum, medium beam, bi-directional,

max at 50º (MB C-BD50 SET)

High-gloss aluminum, asymmetrical beam, max at

20º (MB C-A20 SET)

High-gloss aluminum, asymmetrical beam, max at

40º (MB C-A40 SET)

Semi-high-gloss aluminum, medium beam,

bi-directional, max at 20º (MB D-BD20 SET)

(GMX555 MB SET) or as spare parts (GGX555

C-BD/A as universal piece for both beams 20º

and 40º)

TTX400 TL-D

Multipurpose reectors

Type GMX450

Suitable electrical unit For 1 and 2 TL-D 36 and 58 W versions

Material and light

distribution

Installation One click-in action to electrical unit

Accessory Coupling pieces (white or transparent for

Remarks Reectors can be equipped with various optics,

Main applications Retail (e.g. food, fashion), industry

Steel, pre-lacquered white

Steel, pre-lacquered white, perforated (RP)

Steel, pre-lacquered white, slotted (RS)

perforated reectors), end plates

mirror inserts and attachments

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Philips indoor luminaires8.44 Light-line systems

TL5

TTX400

GMX555 TL5 multi-purpose

reector(s) for wide beam light

distribution

GMX555 TL5 multi-purpose

reector(s), for medium-beam light

distribution (MB) and high-gloss bi-

directional optic, 20° (C-BD20)

GMX555 TL5 multi-purpose

reector(s), for medium-beam light

distribution (MB) and high-gloss

asymmetrical optic, 40° (C-A40)

GMX555 TL5 multi-purpose

reector(s), for medium-beam light

distribution (MB)

Light-line systems

GMX555 TL5 multi-purpose

reector(s), for medium-beam light

distribution (MB) and high-gloss

asymmetrical optic, 20° (C-A20)

GMX555 TL5 perforated multi-

purpose reector(s), for medium-beam

light distribution (RP-MB)

TL-D

GMX555 TL5 multi-purpose

reector(s), for medium-beam light

distribution (MB) and high-gloss bi-

directional optic, 50° (C-BD50)

GMX450 TL-D multi-purpose

reector(s) standard version

GMX555 TL5 multi-purpose

reector(s), for medium-beam light

distribution (MB) and high-gloss bi-

directional optic, 40° (C-BD40)

Philips indoor luminaires 8.45

Light-line systems

TTX400

TTX400TL-Dbasicreectors

This basic one-piece white reector is designed for applications

not requiring optics, mirrors or attachments. It is an efcient and

economical solution.

Installation is done via a simple click-in on the electrical units.

TTX400 TL-D

Basic reectors

Type GMX430

Suitable electrical unit For 1 and 2 TL-D 36 and 58 W versions

Material and light

distribution

Installation One click-in action to electrical unit

Accessory Coupling pieces, end plates

Remarks To be used when optics, mirrors and attachments

Main applications Industry

Steel, prelacquered white

are not needed

Reector is of one piece

TMX400 F32 can be tted with 1-lamp reector

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

GMX430 TL-D basic reector(s)

Philips indoor luminaires8.46 Light-line systems

TTX400

Light-line systems

Philips indoor luminaires 8.47

Light-line systems

TTX400

TTX400 louvers and optics

A wide range of different louvers and optics can be mounted in the

multifunctional reector GMX555/GMX450 for TL5 and TL-D lamps

respectively. These attachments offer many possibilities to shield the

lamps and therefore improve comfort. Each attachment is available in

1-lamp and 2-lamp versions. Changing the lamp remains simple and

quick as the attachments are hinged.

The attachments, optics and mirror inserts can only be used in

combination with the respective functional reector.

TTX400 TL5

Louvers and optics

Type GGX555

Suitable reectors Multi-purpose reectors GMX555, 35 / 49 / 80 W

and 28 / 54 W versions

Material and light

distribution

Remarks C6 and M6 can only be mounted in GMX555 MB

Main applications Retail (e.g. food, fashion), industry

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

High-gloss aluminum, double parabolic, closed (C6)

High-gloss aluminum, double parabolic, closed (C6),

with top reector (T)

Matt aluminum, double parabolic louvers, closed

(M6)

Matt aluminum, ribbed cross louvers (M2)

Lamellae louvers, white (L)

Universal insert, beam 20 or 40º (C-BD/A)

L and M2 can be mounted in both GMX555 MB

and WB

Inserts can be mounted only in GMX555 MB

Type GGX450

Suitable reectors Multi-purpose reectors GMX450, 36 and 58 W

Material and light

distribution

Main applications Retail (e.g. food, fashion), industry

TTX400 TL-D

Louvers and optics

versions

High-gloss aluminum, double parabolic, closed (C6)

Semi-high-gloss aluminum, double parabolic (D6)

Matt aluminum, parabolic lamellae (M5)

Matt aluminum, ribbed cross louvers (M2)

Lamellae louvers, white (L)

Lamellae louvers, perforated, white (LP)

Mesh louver, square mesh cover, white (ML)

Prismatic cover (P)

Philips indoor luminaires8.48 Light-line systems

TL5

TTX400

GMX555 TL5 multi-purpose

reector(s) and GGX555 OLC high-

gloss high-quality aluminum optic with

3D lamellae louver (C6)

GMX555 TL5 multi-purpose

reector(s) and GGX555 matt high-

quality aluminum optic with proled

lamellae louver (M2)

GMX555 TL5 multi-purpose

reector(s) and GGX555 high-gloss

bi-directional/asymmetrical optic (C-

BD/A), beam 20 or 40º

GMX555 TL5 multi-purpose

reector(s) and GGX555 white lamella

louver (L)

Light-line systems

GMX555 TL5 multi-purpose

reector(s) and GGX555 OLC matt

high-quality aluminum optic with 3D

lamellae louver (M6)

GMX555 TL5 multi-purpose

reector(s) and GGX555 OLC high-

gloss high-quality aluminum optic with

3D lamellae louver and top reector

(C6T)

Philips indoor luminaires 8.49

Light-line systems

TTX400

TL-D

GMX450 TL-D multi-purpose

reector(s) and GGX450 OLC high-

gloss high-quality aluminum optic with

3D lamellae louver (C6)

GMX450 TL-D multi-purpose

reector(s) and GGX450 OLC semi-

high-gloss high-quality aluminum optic

with 3D lamellae louver (D6)

GMX450 TL-D multi-purpose

reector(s) and GGX450 matt

standard-quality aluminum parabolic

cross-lamellae louver (M5)

GMX450 TL-D multi-purpose

reector(s) and GGX450 standard-

quality aluminum proled cross-

lamellae louver (M2)

GMX450 TL-D multi-purpose

reector(s) and GGX450 white

lamellae louver (L)

Philips indoor luminaires8.50 Light-line systems

TTX400 TL-D mirror inserts

Mirror inserts improve the distribution of light. They are especially

suitable for applications where directed beams are needed. Installing

mirror inserts is as easy as all other components: they are laid into the

edge prole of the multifunctional reector (GMX450).

TTX400 offers various types of mirror insert (narrow, wide and

asymmetrical beam).

TTX400 TL-D

Mirror inserts

Type GGX451, GGX452 (to be mounted in GMX450

1-lamp version)

GGX453, GGX454 (to be mounted in GMX450

2-lamp version)

Suitable reectors Multipurpose reectors GMX450, 36 and 58 W

versions

Material and light

distribution

Installation Clicking into reector

Remarks Reector GGX451 is of one piece, other ones of

Main applications Retail (e.g. food, fashion), industry

GGX451: matt aluminum, narrow beam (M-NB),

1-lamp 36 and 58 W version

GGX452: matt aluminum, wide beam (M-WB),

1-lamp 36 and 58 W version

GGX453: matt aluminum, wide beam (M-WB),

2-lamp 36 and 58 W version

GGX454: high-gloss aluminum, bi-directional beam

(C-BD), 2-lamp 58 W version

two pieces

Mirror inserts delivered separately

TTX400

Light-line systems

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

GMX450 TL-D 1-lamp multipurpose

reector(s) and GGX452 wide-

beam mirror insert made from matt

aluminum (M-WB)

GMX450 TL-D 2-lamps multipurpose

reector(s) and GGX453 wide-

beam mirror insert made from matt

aluminum (M-WB)

Philips indoor luminaires 8.51

Light-line systems

TTX400

TTX400 electrical units

These electrical units are designed for quick-click mounting in TTX400

trunking sections. They are for use with one or two TL5 or TL-D

lamps, with electronic (dimming) ballast (or conventional ballast in the

case of TL-D), and are available in emergency lighting versions and in

versions for the mounting of projectors. They contain all the necessary

electrical and mechanical functions. All components are screwed onto

the electrical unit. The units can be combined with any type of reector

and are made of white sheet steel.

TMX400 is delivered with electronic ballast HFP. The dimmable version

of the TMX400 is delivered with the electronic ballast HFR, allowing

the light output of the TL5 lamps to be regulated from 3 to 100 %. This

unit is ideal for (day)light-dependent control and must be mounted to

the prewired TTX400 section with 7-wire ribbon cable. The TMX400

units with conventional ballasts are supplied with an electrical

connector, starters, any necessary capacitor and lampholders. For

more control options the TMX400 can be equipped with DALI ballasts.

Especially in combination with Linesense controls DALI solutions offer

even greater control and energy savings.

TMX400 is deliverable in versions with in-built 3-hour or 1-hour

emergency lighting. For conguration of both emergency lighting and

regulation or DALI, TTX400 9-wires is to be used with TMX400 9. The

new solution of standard TTX400 7-wires with new units TMX400

C-2R is recommended.

TTX400 TL5

Electrical units

Type TMX400

Light source Fluorescent:

1 x or 2 x MASTER TL5 / G5 / 28, 35, 49, 54,

80 W

Gear Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

High Frequency Regulator (HFR)

High Frequency Regulator, DALI and Touch

(HFR-TD)

Option Emergency lighting:

1 hour (EL1), 3 hours (EL3)

Master/Slave:

1 master + 1 slave (M/S), both master and slave

(M-S)

HFR/HFR-TD with emergency lighting: TMX400 9

for trunking 9 wires or preferably TMX400 2-CR

to be used with TTX400 7-wires (thereby in case

of non-continuous lightline, to order throughwiring

ZTX400 C1300-2 or C1600-2 as accessory)

Material Sheet steel, white

Installation Click-in xation (both mechanical and electrical

connection) on trunking TTX400 with 5- or 7-wire

ribbon cable

Accessory Blind covers (BC)

Throughwiring set to be used in combination

with TMX400 C2R onto TTX400 7, in the case of

non-continuous lightline (ZTX400 C1300-2 for

1 section 28/54 W; ZTX400 C1600 for 1 section

35/49/80 W).

TTX400 TL-D

Electrical units

Type TMX400

Light source Fluorescent:

1 x or 2 x MASTER TL-D / G13 / 36, 58 W

Gear Electro magnetic (low loss), 230 V / 50 Hz:

Inductive (I)

Inductive with possible mounting of capacitor in

parallel (IKP)

Inductive, parallel compensated (IC)

Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

High Frequency Regulator (HFR)

High Frequency Regulator, DALI and Touch

(HFR-TD)

Option Emergency lighting:

1 hour (EL1), 3 hours (EL3)

Master/Slave:

1 master + 1 slave (M/S)

both master and slave (M-S)

2-lamps lampholder with small width (F32)

HFR/HFR-TD with emergency lighting: TMX400 9

for trunking 9 wires or preferably TMX400 C-2R

to be used with TTX400 7-wires (thereby in case

of non-continuous lightline, to order throughwiring

/ ZTX400 C1300-2 or C1600-2 as accessory)

Material Sheet steel, white

Installation Click-in xation (both mechanical and electrical

connection) on trunking TTX400 with 5- or 7-wire

ribbon cable

Accessory Blind covers

Throughwiring set to be used in combination with

TMX400 C-2R onto TTX400 7, in the case of

non-continuous lightline (ZTX400 C1300-2 for

1 section 28/54W; ZTX400 C1600 for 1 section

35/49/80 W)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Philips indoor luminaires8.52 Light-line systems

TL5 TL-D

TTX400

1-lamp TL5 electrical unit

TMX400 2-lamps TL5 electrical unit

TMX400 1-lamp TL-D electrical unit

Light-line systems

TMX400 2-lamps TL-D electrical unit

TMX400 1-lamp TL-D F32 electrical

unit

Philips indoor luminaires 8.53

Light-line systems

TTX400

TTX400 trunking sections

This trunking system for TL5 and TL-D lamps comprises prewired

sections (TTX400) and optional unwired sections (TTX410). The

sections can be easily clicked together using the integrated electrical/

mechanical coupling pieces. The trunking is available with a complete

range of interchangeable components to offer outstanding exibility.

All the trunking sections are made of white prelaquered steel. Round

edges reduce the risk of injury. Flat-ribbon cable (5 or 7 wires), an

integrated phase-selection switch and contact blocks with click

connection make electrical and mains connection quick, simple and

safe (if 3 phases are used equalised, the maximum current is 16 A).

The rigidity of the sections and coupling pieces limits the number of

mounting brackets needed (max. 3 meters when using 493 trunking

sections). The electrical unit is simply clicked into the trunking for both

mechanical and electrical connection.

The prewired section TTX400 is equipped standard with a 5- or

7-wire 2.5 or 1.5 mm² at ribbon cable. The 7-wire at ribbon cable

is used especially for the integration of light regulation or emergency

lighting functions. Hence, no extra contact blocks or wiring need to be

installed. TTX400 is available in lengths of 1, 2 and 3 electrical units of

TL5 28/54 W, 35/49/80 W and TL-D 36 W and 58 W. It is also available

in 9 wires (7-wire at-ribbon plus 2 additional low-voltage cables for

dimming) for the integration of light regulation and emergency lighting

functions. The new optimized and recommended solution, instead of

TTX400 9, consists of the standard TTX400 7-wire at-ribbon and the

new electrical units TMX400 C-2R.

TTX400 is also available with a 5-wire 1.5 mm² ribbon cable, in the

same lengths as mentioned before; to be used in combination with

HFP units.

TTX400 TL5

Standard trunkings

Type TTX400 (prewired)

Length 1 x, 2 x or 3 x length of electrical unit 49 (491, 492

or 493), also applicable for 80 and 35 W electrical

unit

1 x, 2 x or 3 x length of electrical unit 54 (541, 542

or 543), also applicable for 28 W electrical unit

Electrical circuit option TTX400 5: 1 x at ribbon cable, 5 wires, 1.5 and

2.5 mm²

5-wire: standard at ribbon cable (5)

TTX400 7: 1 x at ribbon cable, 7 wires, 2.5 mm²

7-wire: standard at ribbon cable (7)

TTX400 9: 9-wires

7-wire standard at ribbon cable + 2 hardcore

cables 1 mm² (9)

7-wire standard at ribbon cable + 2 cables

1 mm² for communication purpose (9T)

Alternative to TTX/TMX400 9 : TTX400 7 +

TMX400 C-2R

Phase selection switch and contact blocks with

click connection are integrated

Connection Connection box ZTX400 CU or ZTX400 CM

Trunking piece TTX400 CU7 (to be completed

with ZTX400 EP-CU)

Universal TTX400 CM-CU for cable entry at the

beginning of light-line or in the middle

Material Steel, prelacquered white

Accessory Suspension/mounting brackets, external coupling

piece, etc, see TTX400 accessory section

TTX400 TL-D

Standard trunkings

Type TTX400 (prewired)

Length 1 x, 2 x or 3 x length of electrical unit 36 or 58 W

(361, 362 or 363 resp 581, 582 or 583)

Electrical circuit option TTX400 5: 1 x at ribbon cable, 5 wires, 1.5 and

2.5 mm²

5-wire: standard at ribbon cable (5)

TTX400 7: 1 x at ribbon cable, 7 wires, 2.5 mm²

7-wire: standard at ribbon cable (7)

TTX400 9: 9-wires

7-wire standard at ribbon cable + 2 hardcore

cables 1mm² (9)

7-wire standard at ribbon cable + 2 cables

1 mm² for communication purposes (9T)

Alternative to TTX/TMX400 9 : TTX400 7 +

TMX400 C-2R

Option:

1, 2, 3 section prewired trunking with 2 circuits

at ribbon 5 wires (2C5)

1, 2, 3 section prewired trunking with 2 circuits

at ribbon 7 wires (2C7)

Phase selection switch and contact blocks with

click connection are integrated

Connection Connection box ZTX400 CU or ZTX400 CM

Trunking piece TTX400 CU7 (to be completed

with ZTX400 EP-CU)

Universal TTX400 CM-CU for cable entry at the

beginning of light-line or in the middle

Material Steel, prelacquered white

Accessory Suspension/mounting brackets, external coupling

piece, etc, see TTX400 accessory section

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Philips indoor luminaires8.54 Light-line systems

TL5/TL-D

TTX400

Pre-wired TTX400 trunking with 5-

wire ribbon cable

TTX410 (optional)

TTX410 is the unwired trunking section that allows the electrical

units to be mounted in any desired position. On the upper part of the

trunking section, special knock-out openings enable cable entry. The

mains connection can be made with the 7-pole connector ZTX410 TC.

Electrical connection to the electrical unit can be made with a 5-pole

contact block with insert contacts (ZTX400 DC). These connection

blocks can be installed at any place inside the trunking sections. The

required wiring can be xed inside the trunking section by using

internal cable clips (ZTX410 IC). When electrical units are used with

conventional or low-loss ballasts, H07GU (110 ºC) cables should be

Pre-wired TTX400 trunking with 7-

wire ribbon cable

Light-line systems

used. When electronic ballasts are used, H07VU (70 ºC) cables are

sufcient. The TTX410 unwired trunking sections are delivered with

the mechanical coupling piece. This unwired system is also well suited

to mounting waterproof or surface-mounted luminaires.

TTX400 CM-CU

TTX400 491 7 CM-CU-PI is a 1-length 58 W trunking section with a

7-pole connector. It is a universal and exible piece for mains supply

entry at the beginning or middle of the light-line. It is an alternative to

ZTX400 CU, TTX400 CU7 or ZTX400 CM.

TTX400 TL-D

Standard trunkings

Type TTX410 (unwired)

Length 2 x or 3 x length of electrical unit 58 W (582 or

583)

Material Steel, prelacquered white

Accessory Connection units, suspension/mounting brackets,

external coupling piece, etc, see TTX400 accessory

section

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

Unwired TTX410 trunking

Philips indoor luminaires 8.55

Light-line systems

TTX400

TTX400 units for projectors

Increasingly, accent lighting is integrated in functional and general

lighting systems, especially in applications like shops, showrooms

and public buildings such as museums. The TTX400 light-line system

can be equipped with different types of projector to meet these

lighting needs. Thanks to its modular concept, TTX400 offers great

exibility in the installation of projectors. For example, a change in

the conguration of the shop oor lay-out can be easily followed by

changing the positions of the projectors on the light-line.

Electrical unit with 2 connection points

for projectors with e.g. CDM-T or

SDW-T lamps. The projectors are

mounted with the spot bracket on the

trunking section

Electrical unit with an integrated

3-circuit rail. Standard projectors can

be mounted in the rail. The maximum

weight of the mounted projectors is

9 kg. Alternative now available with

surface-mounted rail

Electrical unit with 4 Express

connection points for low-voltage

halogen spots. This unit has 2 built-in 12

V / 105 W transformers

Philips indoor luminaires8.56 Light-line systems

TTX400

Light-line systems

Philips indoor luminaires 8.57

Light-line systems

TTX400

TTX400/410 suspension-/mounting brackets

The TTX400 suspension-/mounting brackets have been designed to

allow maximum ease and speed in installation and to provide the

greatest possible exibility in use. All brackets are simply clicked on the

trunking. They are suitable for direct xation or with chains, threaded

rods and steel cables for suspension xation. Distance between the

brackets is up to 3 meters (when using the 583 trunking sections),

Suspension-/mounting brackets

Chain bracket cable duct for

suspending the TTX400/410 sections

with the plastic cable duct ZTX400

582/583 CD from chains or steel

cables; includes adjustable suspension

hook

resulting in faster installation and lower costs. All mounting

and suspension brackets are constructed from galvanised

stainless steel, painted white.

Prole bracket for mounting

TTX400/410 sections onto system

ceilings with visible 24 mm T-proles

Universal bracket for suspending

TTX400 section including unwired

section TTX410, which then serves as

a cable duct

Ceiling mounting bracket (8 mm

diameter hole) for mounting

TTX400/410 sections directly onto

the ceiling

Adjustable suspension hook with 2

brass nuts for use with ZTX400 UB,

ZTX400 UCD or ZTX400 CDB

Cable suspension bracket for

suspending the TTX400/410 sections

from steel cable M 1.8. Integrated

clasp mechanism allows easy, tool-less

adjustment of the mounting height.

Steel cable can be ordered separately

with accessory ZTX400 SW1.8-10000

Philips indoor luminaires8.58 Light-line systems

TTX400

Universal bracket for suspending

TTX400/410 sections with threaded

rods or M13 internally threaded

suspension tubes

Universal bracket for suspending

TTX400/410 sections, including plastic

cable duct ZTX400 CD 582/583,

with threaded rods or M13 internally

threaded suspension tubes

Chain bracket for suspending

TTX400/410 sections from chains

or steel cables; includes adjustable

suspension hook

Light-line systems

Accessories

Bracket for projectors. This bracket can

be installed on TTX400 with reector

and louver, so no interruption of the

continuous light-line

Mounting bracket for waterproof

luminaire

Connection unit consisting of a 7-pole

contact block with 2.5 mm² contacts

and mains connection strain-relief for

use at the beginning of a light-line. The

same connection unit is used for the

TTX400 with either the internal 5- or

7-wire at ribbon cable

Mounting bracket for surface mounted

luminaire

Philips indoor luminaires 8.59

Light-line systems

TTX400

ZTX400 end caps for GMX450 TL-D

multi-purpose reector(s) (EP1-450/

EP2-450)

ZTX400 end caps for GMX430 TL-D

basic reector(s)

ZTX400 end caps for GMX555 TL5

multi-purpose reector(s)

ZTX400 coupling piece for GMX450

TL-D multi-purpose reector(s)

ZTX400 coupling piece for GMX430

TL-D basic reector(s)

ZTX400 coupling piece for GMX555

TL5 multi-purpose reector(s)

ZTX400 transparent coupling piece

for GMX450 TL-D perforated multi-

purpose reector(s)

Blind cover, used to close the spaces in

the trunking where no electrical units

are mounted. Also available in length of

36, 49 or 58 W.

White plastic end plate to cover the

trunking; includes a knock-out hole of

20 mm, Philips-branded (PHL)

ZTX400 coupling piece for GMX555

TL5 multi-purpose reector(s)

Philips indoor luminaires8.60 Light-line systems

TTX400

Structure parts with xed angles, for

use with prewired TTX400 light-line.

This structure part is delivered with

integrated coupling piece and internal

through-wiring. Can be used for X-,

T- and L congurations

Steel wire, diameter 1.8 mm², length

10 m

Through-wiring connector Electrical connector for attaching

Cable duct, for installing on the

trunking, in white plastic, with a length

of 2 or 3 electrical units. Can be closed

with blind cover strips. To be used

in combination with the suspension

brackets ZTX400 UCD/CCD. Also

available in length of 49, 54 W.

Internal coupling piece

waterproof and surface-mounted

luminaires to the prewired trunking

TTX400. This electrical connector can

be clicked on the connection block as

mounted standard in the TTX400 light-

line (also ZTX400 DC). The electrical

connector comprises insert contacts

and a strain reliever

Light-line systems

A 5-pole connection block for

connecting the electrical unit when

using the unwired TTX410 proles.

The same connection block is used

as an additional block for the pre-

wired TTX400 when connecting to

emergency lighting or light regulation.

The connector is clicked inside the

trunking and allows through-

The middle-of-line connection unit

enables the mains connection to be

made in the middle of a light-line. The

unit comprises two 7-pole connection

blocks for mains connection. To be used

in the middle of a light-line when very

long lines are used, to restart mains

supply in both directions. The same

middle-of-line connection unit is

The continuous-line connection unit

is used at the end of a light-line when

a through-connection is needed to

pass an interruption of the light-line. It

comprises a 7-pole screw connection

block. The same continuous-line

connector is used for the TTX400 with

either the internal 5- or 7-wire at

ribbon cable. Not to be used for

Cable clips for guiding and easy-click

xing of wires in both TTX400 and

TTX410 trunking sections

Philips indoor luminaires 8.61

Light-line systems

TTX400

TTX400 Linesense

TTX400 with Lighting Controls

Applying Lighting Controls in industry contributes to efcient and

effective lighting solutions. For TTX400 applications, Philips Lighting

offers various standard trunking system based controls solutions,

included in the Linesense range. These solutions offer an intelligent

light-line, which remains easy-to-install.

With Linesense, TTX400 and lighting controls are combined in one,

creating an intelligent light-line which is still easy to install. It allows

substantial energy savings of up to 75%. Developed for industrial

applications like warehouses,

Fully assembled TTX400 Linesense unit

Linesense consists of a 618 mm section of trunking, which is fully pre-

equipped and wired for addition to the trunking. The control function

is integrated into this extra unit and can easily be clicked between

the light-line and the electrical connection unit. Movement detectors

are connected with standard RJ-12 cables and mounted at the right

location with the use of dedicated brackets. Linesense is equipped as

standard with a telejack splitter to easily connect the detectors to the

light-line.

Accessories

ZTX400 MDU-D Linesense unit

suitable for movement detection

(dimming or switching off), daylight

linking and manual control; works with

HFR DALI ballasts

Light sensor intended for high-bay

mounting (approx. 7.5 m high).

Intended for use with the Linesense

control (ZTX400 MDU-D). An

installation bracket is included. The

sensor is connected to the control

unit with a modular plug-in (RJ-12)

connector cable

The ZTX400 MB-MDU is a Linesense

mounting bracket for clicking

movement detector LRM 8115/00 or

LRM 8117/00 to the trunking section.

The right tilt angle can be adjusted

manually and is to be checked by a walk

test. The same tilt angle can be easily

reproduced on more sensors thanks to

a click graduation on the bracket

High-bay passive infrared movement

detector (mounting height up to

15 m), equipped with an adjustable

delay timer (up to 35 minutes). Can

be used with all MDU control units. A

dedicated mounting bracket (ZTX400

MB-MDU) is available, into which the

movement detector can be clicked

Philips indoor luminaires8.62 Light-line systems

TTX400

Light-line systems

Philips indoor luminaires 8.63

Light-line systems

TTX150

Philips indoor luminaires8.64 Light-line systems

Tetrix TTX150 – a simple solution

Tetrix TTX150 is a compact light-line characterized by simplicity. It comes with

everything in one box and installation is tool-less. Tetrix is available in 1.5 or 3 m

lengths with a pre-mounted mechanical coupling and through-wiring connector,

TL-D or TL5 lamps, reector, suspension bracket and snap-on nishing pieces. A

starter kit is required to start the light-line. Tetrix is supplied with a white in-laid

reector to cover most standard applications. Conventional and HF versions are

available. Dedicated 1.5 m trunkings can be equipped with emergency lighting.

Maintenance is carried out from below, enabling the system to be used as a

surface-mounted solution. The recommended maximum installation height is 6m.

www.philips.com/lighting

Light-line systems

Philips indoor luminaires 8.65Light-line systems

TTX150

86.3

170

Tetrix

Type TTX150

Length 1 x or 2 x length of 58 W (581 or 582)

Light source Fluorescent

1 x or 2 x MASTER TL-D / G13 / 58 W

Lamp included Yes (lamp color 840)

Gear Electro magnetic (low loss), 230 or 240 V / 50 Hz:

Inductive, parallel compensated (IC)

Electronic, 220 - 240 V / 50 - 60 Hz:

High Frequency Performer (HFP)

Electronic Included (EI)

Electronic Included, pre-heat (EI-PH)

Option Lamp; uorescent TL5

Material Aluminum, white

Installation Suspended; pre-mounted mechanical coupling and

Accessory Reectors for electronic and conventional gear,

Remarks Standard equipped with 5-wire, 2.5 mm² through-

Main applications Retail

through-wiring connector

lamellae louver, acrylic cover (1500 mm)

wiring

Starter kit required to star t the light line

Suspension brackets and end caps are included in

packaging

Empty through-wiring units available (5x2.5)

Separate switching of lamps in line (left/right) (DS),

in 2-lamp version only

Emergency lighting: 3 hours (EL3), in 581 versions

Pre-wired ribbon cable, 7-wire, 2.5 mm², (7x2.5)

Where relevant, for detailed descriptions of Lighting Controls we refer you to chapter 11, and descriptions for e.g. optics/optical covers, lamps data, photometrical diagrams, etc. to the respective sections in chapter 12.

A

x 1530

2

x2x 3060

2

TTX150

Accessories

Tetrix TTX150 light-line with TL-D

uorescent lamp(s)

Starter kit containing suspension

bracket, electrical connector and end

caps

Product ID EOC

ZTX150 MB-EC-2xEP 124445 99

Preferred selection

Product ID Weight

(kg)

TTX150 581 1xTL-D58W IC 4.00 124834 00

TTX150 582 2x2xTL-D58W IC 9.50 124940 00

TTX150 582 2x2xTL-D58W HFB 6.20 124957 00

Please contact your local Philips representative for additional congurations

European Order

Code (EOC)

Starter kit containing suspension

bracket, electrical connector (separate

switching functionality) and end caps

Product ID EOC

ZTX150 MB-2xEP EC-DS 125350 99

Light-line systems

Philips indoor luminaires8.66

TTX150

Light-line systems

Philips indoor luminaires 8.67

Light-line systems