Philips TL 40W, TL 20W, TL 65W User Manual

1
Fluorescent lamps TL Standard colours
Type A B B C
TL 20W 589.8 594.5 596.9 604.0 TL 40W 1199.4 1204.1 1206.5 1213.6 TL 65W 1500.0 1504.7 1507.1 1514.2
Commercial Type Cap/ Lamp Lamp Colour Correlated Lumen Average Nett EOC name base voltage current designation colour output luminance weight
temperature
VA Klmcd/cm
2
g
/33
TL TL 20W /33 G13 57 0.37 COOL WHITE 4100 1100 0.59 156 717207 TL TL 40W /33 G13 107 0.43 COOL WHITE 4100 2850 0.73 292 717870 TL TL 65W /33 G13 110 0.67 COOL WHITE 4100 4650 0.94 360 719119
/54
TL TL 20W /54 G13 57 0.37 COOL DAYLIGHT 6200 1000 0.53 156 717382 TL TL 40W /54 G13 107 0.43 COOL DAYLIGHT 6200 2500 0.64 292 718594 TL TL 65W /54 G13 110 0.67 COOL DAYLIGHT 6200 4100 0.83 360 719201
TL Standard colours are mostly used in applications where colour rendering is not an important factor. The colour designation of TL lamps creates a certain atmosphere. It varies from warm white to cool daylight.The colour designation is determined by the colour temperature of the lamp.
Fluorescent lighting is efficient and economical.The efficacy (lumen/watt) of all fluorescent lamps is high compared to most other light sources. Different luminaires are available for various purposes. TL lamps are low-pressure mercury discharge lamps with a clear tubular 38 mm envelope. The tube wall is internally covered with a mixture of fluorescent powders. TL Standard colours have a moderate colour rendering index (CRI 50-70). Especially the red part of the spectral power distribution is moderately covered by Standard colours.
Dimensions in mm
40.5 max.
A B C
2
Fluorescent lamps TL Standard colours
Spectral power distributions
Lumen maintenance
Life expectancy
Life expectancy
Life expectancy
TL /33 Ra = 63
500 400 300 200
µW per 5 nm per lumen
100
0
400 500 600 700
TL Standard colours on conventional gear (inductive/capacitive)
100
90 80
Survivals in %
70 60 50
0
TL Standard colours on conventional gear (50% inductive/50% capacitive)
100
capacitive
90 80
Survivals in %
70 60 50
0
50% inductive 50% capacitive
Typical values:
5.000 hrs: 95%
10.000 hrs: 70%
15.000 hrs: n.a.
inductive
capacitive
5000 10000
5000 10000
inductive
Wavelength in nm
15000
Operating hours
15000
Operating hours
20000
20000
TL /54 Ra = 72
500 400 300 200
µW per 5 nm per lumen
100
0
400 500 600 700
TL Standard colours on conventional gear
100
90
Lumen in %
80 70
Typical values:
5.000 hrs: 81%
60
10.000 hrs: 73%
15.000 hrs: 69%
50
0
5000 10000
Wavelength in nm
15000
Operating hours
20000
TL Standard colours on conventional gear (inductive)
100
90 80
Survivals in %
70
Typical values:
5.000 hrs: 99%
60
10.000 hrs: 90%
15.000 hrs: n.a.
50
0
5000 10000
15000
20000
Operating hours
Loading...