March 1987 2
Philips Semiconductors Product specification
Horizontal combination TDA2595
GENERAL DESCRIPTION
The TDA2595 is a monolithic integrated circuit intended for use in colour television receivers.
Features
• Positive video input; capacitively coupled (source impedance < 200 Ω)
• Adaptive sync separator; slicing level at 50% of sync amplitude
• Internal vertical pulse separator with double slope integrator
• Output stage for vertical sync pulse or composite sync depending on the load; both are switched off at muting
•ϕ
1
phase control between horizontal sync and oscillator
• Coincidence detector ϕ3 for automatic time-constant switching; overruled by the VCR switch
• Time-constant switch between two external time-constants or loop-gain; both controlled by the coincidence detectorϕ3
•ϕ1 gating pulse controlled by coincidence detector ϕ
3
• Mute circuit depending on TV transmitter identification
•ϕ2 phase control between line flyback and oscillator; the slicing levels for ϕ2 control and horizontal blanking can be set
separately
• Burst keying and horizontal blanking pulse generation, in combination with clamping of the vertical blanking pulse
(three-level sandcastle)
• Horizontal drive output with constant duty cycle inhibited by the protection circuit or the supply voltage sensor
• Detector for too low supply voltage
• Protection circuit for switching off the horizontal drive output continuously if the input voltage is below 4 V or higher
than 8 V
• Line flyback control causing the horizontal blanking level at the sandcastle output continuously in case of a missing
flyback pulse
• Spot-suppressor controlled by the line flyback control
QUICK REFERENCE DATA
PACKAGE OUTLINE
18-lead DIL; plastic (SOT102); SOT102-1; 1997 January 07.
Supply voltage (pin 15) V
15-5=VP
typ. 12 V
Sync pulse amplitude (positive video) V
i(p-p)
min. 50 mV
Horizontal output current I
4
typ. 50 mA