Philips tda2595 DATASHEETS

INTEGRATED CIRCUITS

DATA SH EET

TDA2595

Horizontal combination

Product speciﬁcation File under Integrated Circuits, IC02

March 1987

Philips Semiconductors Product speciﬁcation

Horizontal combination TDA2595

GENERAL DESCRIPTION

The TDA2595 is a monolithic integrated circuit intended for use in colour television receivers.

Features

• Positive video input; capacitively coupled (source impedance < 200 Ω)

• Adaptive sync separator; slicing level at 50% of sync amplitude

• Internal vertical pulse separator with double slope integrator

• Output stage for vertical sync pulse or composite sync depending on the load; both are switched off at muting

•ϕ

phase control between horizontal sync and oscillator

• Coincidence detector ϕ3 for automatic time-constant switching; overruled by the VCR switch

• Time-constant switch between two external time-constants or loop-gain; both controlled by the coincidence detectorϕ3

•ϕ1 gating pulse controlled by coincidence detector ϕ

• Mute circuit depending on TV transmitter identification

•ϕ2 phase control between line flyback and oscillator; the slicing levels for ϕ2 control and horizontal blanking can be set

separately

• Burst keying and horizontal blanking pulse generation, in combination with clamping of the vertical blanking pulse (three-level sandcastle)

• Horizontal drive output with constant duty cycle inhibited by the protection circuit or the supply voltage sensor

• Detector for too low supply voltage

• Protection circuit for switching off the horizontal drive output continuously if the input voltage is below 4 V or higher

than 8 V

• Line flyback control causing the horizontal blanking level at the sandcastle output continuously in case of a missing flyback pulse

• Spot-suppressor controlled by the line flyback control

QUICK REFERENCE DATA

Supply voltage (pin 15) V Sync pulse amplitude (positive video) V Horizontal output current I

PACKAGE OUTLINE

18-lead DIL; plastic (SOT102); SOT102-1; 1997 January 07.

March 1987 2

15-5=VP i(p-p)

typ. 12 V min. 50 mV typ. 50 mA

Philips Semiconductors Product speciﬁcation

Horizontal combination TDA2595

March 1987 3

Fig.1 Block diagram.

Philips Semiconductors Product speciﬁcation

Horizontal combination TDA2595

RATINGS

Limiting values in accordance with the Absolute Maximum System (IEC 134)

Supply voltage (pin 15) V Voltages at:

pins 1, 4 and 7 V pins 8, 13 and 18 V pin 11 (range) V

Currents at:

pin 1 I pin 2 (peak value) ± I pin 4 I pin 6 (peak value) ± I pin 7 I pin 8 (range) I pin 9 (range) I

pin 18 ± I Total power dissipation P Storage temperature range T Operating ambient temperature range T

15-5=VP

1;4;7-5 8;13;18-5 11-5

6M 7 8 9

tot stg amb

max. 13,2 V

max. 18 V max. V

−0,5 to + 6V

max. 10 mA max. 10 mA max. 100 mA max. 6 mA max. 10 mA

−5to+1mA

−10 to + 3mA

max. 10 mA max. 800 mW

−25 to + 125 °C 0 to + 70 °C

March 1987 4

+ 8 hidden pages