Philips TD5350GS/421P, TD5350BB/199, TD5350BB/421P, TD5350/GS428P, TD5350/GS038P User Manual

...

manual channel strip key

phoneline indicator light

telephone cable

mains power supply cable

telescopic antenna

phonebook key

talk key

dialling keypad

recall (for use with Network services or attached to a PABX)

and programming key

base station loudspeaker

base station antenna

phoneline / power indicator light

earpiece

LCD display

caller list key

loudspeaker key

SOS key

redial key

microphone

1 2

Thank you for purchasing a

Philips Icana 5350 cordless telephone

Your Icana 5350 cordless telephone incorporates advanced Philips cordless technology for even greater simplicity and user-friendliness.

Your Icana 5350 is fitted with a multi-channel radio system, which allows you to avoid interference during calls using the D2NS system (Dual Dynamic Noise Suppressor) to eliminate hiss.

Your Icana 5350 is fitted with a liquid crystal display screen on the handset, giving you all the features of a real

phonebook - 25 names and telephone numbers. You can also identify the telephone number of the caller (Caller ID)* and consult the Caller ID list*. Lastly, you can see how long your calls last.

This instruction manual will help you discover your product’s features and get to know its wide range of functions.

This product may be used legally in the country where the appropriate authority has given its specific authorisation. This authorisation appears on a label at the back of the base station.

In the interest of improving our products and services. Philips reserves the right to alter the specifications contained in this document at any time without prior notice.

SAFETY INFORMATION:

The only way to cut off the power supply to the telephone is to disconnect the power supply block from the mains outlet. Be sure that the mains outlet is located near the telephone and is easily accessible.

Important! This telephone must be used in conjunction with a remote-powered main telephone (not requiring electrical current).

The mark authorisation, concerning user safety and electromagnetic interference according to directives 73/23/EEC, 89/336/ EEC and 93/68/EEC.

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO EMERGENCY SERVICES.

ELECTRICAL CONNECTION:

Mains power supply 230 volts, single-phase AC, except for installations with the IT diagram as defined in standard EN 60-950. Important ! The voltage of the network is classified as hazardous according to the criteria of standard EN 60-950.

TELEPHONE CONNECTION:

The voltages used on this network are classified as TNV-3 (telecommunications network voltages), defined in standard EN 60-950.

RINGER EQUIVALENCE NUMBER (REN):

Your Icana 5350 has a Ringer Equivalence Number (REN) of 1.0. To determine the maximum number of telephone that can be connected to your line, add together the individual RENs of all the apparatus you wish to connect. If this total exceeds four, one or all of your telephones may not ring correctly.

* Only if you have subscribed to this service provided by your local telephone company.

on the product certifies its compliance with all applicable technical regulations, as of the date of

Package contents

1 cordless handset equipped with a telescopic antenna and a battery.

•

1 base station equipped with a loudspeaker.

•

1 power supply block which provides the base with electrical power.

•

1 telephone cable.

•

1 user’s manual.

•

Your telephone’s operating capacity

Your telephone works from a battery located inside the handset.

Battery charging starts as soon as you place the handset on its base. A completely discharged handset will take

•

about 24 hours to charge. With a fully charged new battery, your handset will be able to operate for about 8 hours on-line and about 8 days

•

on stand-by (in other words when not communicating). To recharge your telephone, the base must be connected to a power supply. Only use the mains adaptor supplied

•

with your phone.

Helpful hint

To ensure maximum handset charge, replace the handset on the base station regularly.

Note:

You can place your handset on the base station with the keypad face up or face down.

Protecting your telephone

Fraudulent use of your telephone line by another cordless phone is unlikely as the base station assigns the handset one of a possible 65,535 identification codes.

This code means that only your handset is authorised to use your line for making calls.

In the event of a power failure

In the event of a power failure, your Icana 5350 cordless telephone will lose:

the Redial memory.

•

any unconfirmed number in course of memorisation.

•

But will save:

the numbers in your phonebook.

•

the caller list.

•

Your telephone’s indicator lights

THE BASE STATION HAS 1 GREEN INDICATOR LIGHT:

Lit when the base station is powered up by the mains adaptor.

•

Flashes in the following cases:

•

THE HANDSET HAS 1 GREEN INDICATOR LIGHT:

•

– during a call (line busy).

Unlit when the base station is not powered up.

Lit when the handset is on-line. Flashes in the following cases:

– when receiving a call. – while establishing a radio link for an outgoing call. – during a programming phase.

Unlit in all other cases.

The sounds your telephone makes

Your telephone makes the following sounds:

a unique ringing tone, if a call is incoming.

•

1 short beep, when you press a key.

•

1 long beep, when the radio link between the base station and the handset has been lost.

•

1 beep, when replacing the handset on the base station.

•

3 beeps, to confirm any programming changes you have made to your telephone.

•

5 beeps, to tell you that your handset needs to be recharged on its base station.

•

Recommendations and precautions

INSTALLATION

Take care not to install the base close to electrical appliances (heater, TV, domestic appliance, etc.) or

•

metal supports (doors/windows, partitions, etc.), which could impair the quality of communication and restrict the range of your phone. Do not install the base in a humid room or close to a strong source of heat.

•

SAFETY

Do not get the handset wet.

•

Do not open the telephone, as this could expose you to high voltages. Contact the customer support service for

•

any repairs. Avoid all contact between the battery and any conducting materials (keys, paper clips, rings, bracelets, etc.).

•

Avoid all contact between the charge terminals (base or handset) and any conducting materials (keys, paper

•

clips, rings, bracelets, etc).

MAINTENANCE

Before cleaning your telephone, disconnect the power supply cable and the telephone cable. Use a cloth or

•

chamois leather moistened with a light soapy water solution, then wipe off with a dry cloth. This will ensure that your telephone stays looking as good as new. Never spray the phone with cleaning products or solvents.

•

We recommend periodically cleaning the charge terminals on the base and the handset with a dry,

•

lint-free cloth.

Setting up your Icana 5350

1 On the top side of the base station, connect

the telephone cable to the smaller of the sockets and then to the telephone socket in the wall.

2 Connect the power supply cable to the larger

of the sockets on the base station and then to the power outlet.

The indicator light on the base station lights up. Your telephone is now correctly connected.

3 Fully extend the base station antenna.

4 Place the handset on its base station and

Mains power supply Telephone line

* Your telephone line is connected to a central. The “tone dialling” mode makes possible the consultation of specific

services of telephone network through short numbers.

leave it to charge for at least 15 minutes.

Your telephone is now ready to make or receive calls in “Tone dialling” mode*.

To charge the battery completely, leave the handset on its base station for 24 hours.

Your handset display

This line of the These symbols tell you what is happening on your phone.

The display of your Icana 5350 has 6 symbols:

indicates that: – you are programming your phone.

indicates that: – you are consulting or modifying your phonebook.

indicates that: – you have the line (flashing) or a call is in progress (on).

indicates that:

– new calls have been stored in the caller list since your last consultation (on). – a network message is sent (flashing).

indicates that: – the base station loudspeaker is on.

indicates that:

– when on the base station, the handset is charging. – when out of the base station, the batteries are not charged enough (flashing).

display shows up

to 10 numbers or

characters.

Changing the dial mode

Your telephone has two possible dial modes: "tone" or "pulse". The factory setting for your telephone is "tone"*. If you are not connected to an electronic central exchange, you need to use "pulse".

To set the dial mode from “tone” to “pulse”:

1 Pick up the handset and press

The indicator light on handset and base station starts flashing.

2 Press the

3 Press the

Your handset emits 3 beeps to confirm. The telephone is now ready to dial in "pulse" mode.

To set the dial mode from "pulse" to "tone":

1 Pick up the handset and press

The indicator light on handset and base station starts flashing.

2 Press the

3 Press the

Your handset emits 3 beeps to confirm. The telephone is now ready to dial in "tone" mode.

When your telephone line is connected to an electronic exchange, the "tone" mode provides faster dialling, and

access to special telephone network services.

key.

®.

Loop Disconnect Signalling:

Although this equipment can use either loop disconnect or DTMF signalling (Tone dialling), only the performance of the DTMF signalling (Tone dialling) is subject to regulatory requirements for correct operation.

It is therefore strongly recommended that this equipment is set to use DTMF signalling (Tone dialling) for access to public or private emergency services. DTMF signalling (Tone dialling) also provides faster call set up.

Changing radio channels during a call

During a call, if the radio link is poor, you can change radio channels and possibly improve sound quality.

To change radio channels during a call:

Press the

Notes:

If you are too far from the base station when the radio channel changes, the call will be cut off.

•

When the radio channel changes during a call, your correspondent will hear a short succession

•

of beeps.

key on the handset.

– If a new channel is found, the call will continue on this channel. – If another channel is not found, the call will continue on the initial channel.

Making a call

1 Pick up the handset and fully extend the

telescopic antenna

Talk key

antenna. NOTE! The handset battery must be charged.

2 Press the

The search for a free channel starts. The flashes. The base station and handset indicator lights flash.

As soon as the link is established, the handset indicator light stop flashing and remain lit. The indicator light on the base station continues flashing and you will hear the dial tone.

3 Dial the number you want.

The display shows the dialled number (for 5 seconds), then the call timer.

4 To hang up, press the

handset, or just replace the handset on the base station.

The display shows the call time for 5 seconds.

key on the handset.

symbol and the

key on the

Answering a call

1 To answer: pick up the handset, fully extend

the antenna, and press the key.

When the phone rings, the telephone number of the caller is displayed (if you subscribe to the caller identification service). Once the call is answered, the call timer is displayed.

2 To hang up: press the

replace the handset on the base station.

The display shows the call time for 5 seconds.

key again, or just

Redialling the last number dialled (Redial)

1 Pick up the handset. 2 Press the

Wait for the tone.

3 Press the

The last number dialled (maximum of 23 digits) is displayed and is automatically redialled.

key on the handset.

symbol

Putting the call on the loudspeaker

Your Icana 5350 base station is equipped with a loudspeaker so that other people with you can listen to the conversation.

1 During a call, press the

The

symbol is displayed and the sound is amplified

through the loudspeaker on the base station.

2 To turn off the loudspeaker, press the key

on the handset again.

key on the handset.

Saving a name and a number in the phonebook

With your Icana 5350, you can save in the phonebook 25 numbers and their associated names (up to 10 characters). This function allows you to automatically dial the numbers you use most often. To ensure correct operation, stay close to the base station during the programming phase.

To store in the phonebook a telephone number and the associated name:

1 Press the phonebook

symbol and the handset indicator light flash. The symbol remains lit when the radio link is established.

The EMPTY is displayed if there is no entry in the phonebook.

2 Press the key.

NAME: is displayed.

3 Enter the name (up to 10 letters) using the handset keypad:

The letters of the alphabet are arranged in groups of three or four beside the numbers key corresponding to the required letter or number 1,2, 3, 4, or 5 times.

– To validate the last character (letter or digit) typed, wait for 3 seconds or press another character. – To delete the last character typed, press the – To type a space between two letters, press the – To type “ – ”, press

Example: to enter the name “A DUMMAS-2”,

– Press once (A), – Press once (A ), – Press once (A D), – Press – Press – Wait for 3 seconds (A DUM), – Press – Press – Press – Press – Press four times (A DUMMAS-2),

twice (A DU), once (A DUM),

once (A DUMM), once (A DUMMA), four times (A DUMMAS), twice (A DUMMAS-),

key on the handset.

to . Press the

key.

twice.

4 Press the key.

NUMBER: is displayed. Now you can store the telephone number associated with the last name typed.

5 Dial the number to be memorised (maximum of 23 digits).

If this number contains an “area code”, insert a pause after this “area code” by pressing the handset.

If you insert a wrong number, you will have to start the procedure again.

6 Press the

RECORD is displayed for 2 seconds. The

handset emits 3 confirmation beeps.

If your handset does not emit the 3 confirmation beeps, the phone number you have just stored has not been saved: start the procedure again from step

key.

symbol and the handset indicator light are switched off. The

key on the

Note:

If the phonebook is full (i.e. 25 names and telephone numbers already stored in the phonebook), pressing the key (step ) will display the “FULL” message: the name and the telephone number are not saved.

Erasing a name and a number from the phonebook

1 Press the key on the handset.

symbol and the handset indicator light flash. The first name is displayed.

The

2 Press

3 When the name to be erased is displayed, press the

ERASE is displayed for 2 seconds. The symbol and the handset indicator light are switched off. The

handset emits 3 confirmation beeps.

or to scroll through the list and choose the name you want to erase.

key.

Note:

If the phonebook is empty, the “EMPTY” message is displayed during 2 seconds.

Calling a number in the phonebook

1 Press the key on the handset.

symbol and the handset indicator light flash. The first name is displayed.

The

2 Press

check the associated telephone number, press the key.

3 Press the

The telephone number is automatically dialled.

or to scroll through the list and choose your correspondent. If you want to

key.

Saving an emergency number - SOS function

With your Icana 5350, you can store an emergency number in the key. Move close to the base station and follow the procedure below. The SOS feature is only available if electric power is supplied to the base station and if the handset battery is charged.

To ensure correct operation, stay close to the base station during the programming phase.

1 Press the key on the handset.

symbol is displayed and the handset indicator light flashes. The base station indicator light flashes and

The

NUMBER: is displayed.

2 Dial the number to be memorised (maximum 23 digits).

If this number contains an “area code”, insert a pause after this “area code” by pressing the handset. The dialled number is displayed.

If you insert a wrong number, you will have to start the procedure again.

3 Press the

This key is now associated with the telephone number you just dialled. The indicator light are switched off. The handset emits 3 confirmation beeps and displays RECORDED for 2 sec.

If you do not hear the 3 confirmation beeps, the number you just dialled has not been saved. Start the procedure again from step

key.

symbol and the handset

key on the

Calling an emergency number - SOS function

1 Extend the handset antenna and press the key. 2 Press the

You have the dial tone. The emergency number is displayed and dialled automatically.

3 Hang up by pressing the

The display shows the call time for 5 seconds.

key on the handset.

Identifying the caller

Your Icana 5350 is designed to store and display specific information provided to subscribers of local telephone company caller identification services.

When you subscribe to these services, your telephone company transmits the telephone number, the date, and the time of each received call. The LCD screen of your product immediately displays this information between the first and second ring, allowing you to identify the calling party. This information is stored in the caller list, that you can consult.

Your Icana 5350 can store up to 25 telephone numbers in this caller list. If 25 calls are already stored and a new call comes in, the oldest caller identification is deleted and the new caller identification is recorded.

Consulting the caller list

To consult the caller list, proceed as follows:

1 Press the

The of the latest call is displayed and the

UNAVAILABLE is displayed.

2 Press

You will hear the dial tone. The emergency number is displayed and is dialled automatically.

3 Press the key to display the date and the time of a call.

key on the handset to access the caller list.

symbol flashes while the radio link is made. Once the radio link is established, the caller identification

symbol stops flashing. If no caller identification is stored,

or to scroll through the telephone numbers in the caller list.

THE CALLER LIST MAY NOT BE EMPTY AT THE

ATTENTION

FIRST TIME. PLEASE CLEAR UP BEFORE USE.

4 Press the key again to display the number of calls received by this person (in this

case, the date and the time of the last call are taken into account).

5 To exit the caller list, press the

key.

Note:

After consulting, the symbol is switched off, even if all the telephone numbers have not been consulted.

•

If you have not subscribed to your local telephone company’s caller identification service, the screen displays

•

NO ID.

If, for any reason, the telephone number of the caller is not available, or if the caller is outside the caller identification

•

service area, the screen displays OUT.

If you want to store in your phonehook a number from the caller list:

When you have selected this number during step , press the key on the handset. NAME: is displayed. Enter the name (up to 10 letters) that is to be associated with this number. Press the displayed for 2 seconds. The handset emits 3 confirmation beeps.

key again. RECORD is

If you want to erase a number from the caller list:

When you have selected the number to be erased during step , press the key on the handset. ERASE is displayed for 2 seconds. The handset emits 3 confirmation beeps.

Dialling from the caller list

When you consult the list of the last 25 calls received, you can call one of the 25 correspondents by selecting the number with

and , then press the key.

Note:

You may wish to add a number (maximum of 10 digits) before trying to call a number in the caller list.

To do this, follow the procedure in step

1 Press key 2 If you wish to add a number to this telephone number, press the key

digits (up to ten). The figures will be automatically placed before the telephone number of your correspondent.

3 Press the

The displayed number is dialled automatically, then the duration of call is displayed.

or to select the telephone number of your correspondent.

key.

then enter the

Switching the battery saver on or off

This function allows you to reduce the handset’s battery consumption and therefore increase its capacity when you are not making calls. However, once you have chosen the battery saver function:

the handset does not ring when off the base station.

•

SAVE BATT is displayed when the handset is not on the base station.

•

the icon is not displayed for incoming calls.

•

Note:

If the battery saver is switched on:

– The base station will ring when an incoming call is received. – To answer the cal on the handset, press the

key.

USER MANUAL

Multichannel cordless telephone with LCD screen and loudspeaker

5350

To switch the battery saver on:

1 Pick up the handset and press the

The

symbol and the handset indicator light flash then the symbol remains lit once the call is received.

PROGRAM is displayed.

2 Press the

TEL SETUP is displayed.

3 Press the

SAVEBATT Y is displayed. The handset emits 3 confirmation beeps.

To switch the battery saver off:

1 Pick up the handset and press the

symbol and the handset indicator light flash then the symbol remains lit once the call is received.

The

PROGRAM is displayed.

2 Press the

TEL SETUP is displayed.

3 Press the

SAVEBATT N is displayed. The handset emits 3 confirmation beeps.

key on the handset.

key.

Changing the handset battery

Contact your local Philips dealer to obtain a new battery.

1 On the back of the handset, lift the battery

compartment cover using the opening at the

top of the cover. 2 Carefully disconnect and remove the battery. 3 Insert the new battery: place the bottom of

the battery against the compartment catches,

then push the battery down into position.

Connect the battery. 4 Replace the battery compartment cover: hook

the cover into the slot of the handset, then

push down to close. 5 Replace the handset on the base station to

charge the new battery.

Maximum capacity will be reached in about 24 hours

charging.

Note:

When your battery is not charged enough to ensure correct operation, your handset emits 5 warning beeps. In this case, place the handset on the base station to recharge the battery.

Your rechargeable batteries contains cadmium. Check your local regulations for special disposal

instructions.

Troubleshooting your Icana 5350

The following table lists situations you may encounter when using your Philips Icana 5350 cordless telephone and how they might be corrected.

Problem

The indicator light on the base station does not light up.

The charge indicator sound on the handset is not heard.

The line indicator light on the handset remains lit even when a call is not in progress.

There is no dialling tone.

The handset remains at last 15 minutes on base station and there is no dialling

tone. There is interference

during calls.

The call was cut off suddenly or there is interference and hissing.

Likely cause

The base station is not connected properly.

The charging contacts are not

•

touching. There is dirt on the charging

•

contacts.

The handset hasn’t been put down properly.

The base station is not connected

•

properly to the telephone line.

The handset battery is

•

discharged.

You are too far from the base

•

station.

Worn out battery.

You are too far from the base

•

station.

You are near other electric

•

devices.

The base station and handset

•

antennas are not extended enough.

The base station is near metal

•

surfaces of electrical apparatus.

You have moved beyond the

•

operating range or the handset battery is discharged.

Check the connections.

•

Lift up the handset then put it

•

back on the base station. Clean the charging contacts with a

•

clean cloth or pencil eraser.

Press the the handset on the base station.

Check the connections.

•

Place the handset on the base

•

station and wait for at least 15 minutes.

Move closer to the base station.

•

Contact your Philips dealer to get a new battery.

Move closer to the base station.

•

Move the base station away

•

from electronic appliances and press the key.

Fully extend the base station

•

and handset antennas.

Move the base station from

•

electronic appliances.

Move near the base station or

•

check the telephone’s range or charge the handset battery.

Solution

key and replace

Your Philips guarantee

Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality

standards. If unfortunately, something should go wrong with this product, Philips guarantees free of charge labour and replacement

parts irrespective of the country where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a consumer.

This Philips guarantee applies provided the product is handled properly for its intended use, in accordance with the operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase, dealer's name and model and production number of the product.

The Philips guarantee may not apply if:

• the documents have been altered in any way or made illegible;

• the model or production number on the product has been altered, deleted, removed or made illegible;

• repairs or product modifications and alterations have been executed by unauthorised service organisations or persons;

• damage is caused by accidents including but not limited to lightning, water or fire, misuse or negligence.

Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country.

Should you have any questions, please contact:

Philips Consumer Communications

P O Box 1056 Kingston & Surbiton Surrey KT1 6YN Phone: 0870 900 9070

4311 256 10632

Type and serial number