Philips T1 User Manual

T1 LightLines
Miniaturized lighting system
Ultra long life
High brightness, High Output
Modular system for continuous light lines
PROVISIONAL
For more information:
Data subject tochange 3222 635 50521 * FEB 2005
1. Outdoor Application:
Bollards created by OLO
2. Kitchen Application:
Furniture created by TOPLIGHT
3.Application:
Created by TEKNA, continuous LightLine
Polar light distributions T1 LightLine
Continuous LightLines are possible
T1 LightLine and TL5 comparison: actual size
Using cold cathode technology long life T1 lamps have two unique benefits:
• A very small diameter: 2.8mm
• An extreme long life: 50,000 hrs to a 30% lumen depreciation in typical usage.
Usage is optimized in a series of fully integrated modules: the Philips LightLine
program. Combining long life T1 lamps, low voltage drivers and a protective
acrylic cover within a slim profile of only 16mm width, these modules are
immediately ready for integration into luminaires, signs, cabinets or other
applications. Narrow and wide beam versions are available. A miniaturized power
supply optimized to operate one or two T1 LightLines is available.This 35W,
25V DC power supply has a cross sectional area of 27mm x 27mm.
Type Profile Profile Profile Input Input System Avg. temp at Luminous Luminance Luminance
Length Width Height Voltage Current Power Profile End Flux (wide beam) (narrow beam)
mm mm mm V (DC) A W ºC lm cd/cm
2
cd/cm
2
T1 LightLine 300 300 16 25 25 0.36 8.9 55 189 0.8 2.5 T1 LightLine 500 500 16 25 25 0.41 10.4 55 314 0.8 2.5 T1 LightLine 700 700 16 25 25 0.48 12.0 55 440 0.8 2.5
Specifications - T1 LightLine*
*Note: For more detailed information ask for specific technical guide.
1. 2. 3.
T1 LightLines
PROVISIONAL
Applications areas
• Retail cabinets
• Signs
• Point of Purchase
• Emergency / orientation
• Downlighters
• Transpor t
• Tunnels and other guidance
• Urban furniture
• Architectural detailing, Indoor
• Architectural detailing, Outdoor
• Kitchens / Furniture
16mm 16mm
Loading...