Philips SWW1800-27 User Manual
Register your product and get support at
www.philips.com/welcome
SWW1800/27
EN User manual
Contents
1 Important 5
Safety 5
2 Your SWW1800 8
What is in the box 8
Overview 8
3 Installation 10
Connect the transmitter to your HD
devices 10
Connect the receiver to the HDTV set 10
Install remote control batteries 11
4 Activate the SWW1800 function
and set up the link 12
Turn on the power of your HDTV 12
LED indicator status of the receiver 12
Activate the wireless link 12
Enter the standby mode 14
5 Position the transmitter and
receiver 16
6 Wallmount the receiver 17
English
7 Technical data 18
Supported resolution 18
Product specications 18
8 Troubleshooting 20
EN
3
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
Warning
To reduce the risk of re or electric shock, this •
apparatus should not be exposed to rain or
moisture and objects lled with liquids, such as
vases, should not be placed on this apparatus.
Caution
To prevent electric shock, fully inser t the plug. •
(For regions with polarized plugs: To prevent
electric shock, match wide blade to wide slot.)
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including ampliers)
that produce heat.
i Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
k Only use attachments/accessories
specied by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
4
EN
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
Do not mix batteries (old and new •
or carbon and alkaline, etc.).
Remove batteries when the unit is •
not used for a long time.
p Apparatus shall not be exposed to
dripping or splashing.
q Do not place any sources of danger on
the apparatus (e.g. liquid lled objects,
lighted candles).
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Relocate the receiving antenna.•
Increase the separation between •
equipment and receiver.
Connect the equipment into an outlet on •
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced •
radio/TV technician for help.
English
Warning
Use only the provided power supply. •
Manufacturer: SINO-AMERICAN
Model: SA115B-05-A
Interference information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions :
1 This device may not cause harmful
interference; and
2 This device must accept any interference
received, including interference that may
cause undesired operation.
Notice for USA
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
Notice for Canada
Class B Clause
This digital apparatus does not exceed the
Class B limits for radio noise emissions from
digital apparatus as set out in the Radio
Interference Regulations of the Canadian
Depar tment of Communications.
This Class B digital apparatus complies with
Canadian ICES-003.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
The packaging of this product is intended to
be recycled. Contact your local authorities
EN
5
for information about how to recycle the
packaging.
When this logo is attached to a product,
it means a nancial contribution has been
paid to the associated national recovery and
recycling system.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers, which, like any
electronic apparatus, in general have the
ability to emit and receive electromagnetic
signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips conrms that if its products are
handled properly for their intended use, they
are safe to use according to scientic evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
batteries into the trash or municipal waste,
which may be illegal in your area.
Philips’s participation in RBRC® makes it easy
for you to drop off the spent battery at local
retailers participar ting in RBRC® program or
at authorized Philips product service centers.
Please call 1-800-8-BATTERY for information
on Ni-MH battery recycling and disposal bans/
restrictions in your area. Philips’s involvement
in this program is par t of its commitment to
protecting our environment and conserving
natural resources.
RBRC® is a registered trademark of
Rachargeable Battery Recycling Corporation.
HDMI, and HDMI logo and High-Denition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
The RBRC® seal
The RBRC® Seal on the nickel metal hydride
battery indicates that Philips Royal Electronics
is voluntarily par ticipar ting in an industry
program to collect and recycle these batteries
at the end of their useful lives, when taken
out of service within the United States and
Canada.
The RBRC® program provides a convenient
alternative to placing used nickel metal hydride
6
EN
Quick Installation Guide
2 Your SWW1800
Transmitter
SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4
1
234
Receiver
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at www.philips.
com/welcome.
What is in the box
Note
Make sure you have all these items in the •
box. Contact your dealer for any missing or
damaged items.
Transmitter
HDMI cable
Power adaptor x 2
Quick start guide
User manual
English
Receiver
Remote control
Warranty
EN
7
Receiver
1
DC IN
HDMI OUT
2
1
Overview
Transmitter
1
234
4321
POWER
4
3
2
1
SOURCE 1
SOURCE 2
SOURCE 3
SOURCE 4
POWER
Y
Pb
Pr
2
1
SWW1800 Transmitter
SWW1800 Receiver
Front view
Front view
Power indicator
1/2/3/4 Source indicators
Top view
Power button with LED indicators
1/2/3/4 Source selection buttons
Rear view
1 HDMI IN
2 Component YPbPr and L/R Audio IN
3 Power IN connector
8
EN
1 Power indicator
Top view
Rear view
1 HDMI OUT connector
2 Power IN connector
The SWW1800 gives you a total wireless
solution to place your HDTV set or projector
anywhere you want. With the built-in omni-
directional antenna, the transmitter can transmit
an uncompressed video content over 20m/66ft
inside the whole room area without latency. The
receiver can receive signals for viewing on your
HDTV. All you need to do is to:
Connect the transmitter to your HD •
devices. Examples of HD devices are
satellite, cable, ADSL set-top box, blu-ray,
DVD player and game console.
Loading...