Philips SPP4220WA-17 User Manual

Philips Surge protector
Theatre director
12 outlets
SPP4220WA
Home Theater System
Simple, powerful and stackable this unique surge protector resides within your component case for easy access. Completely isolates connected equipment from the power source during a catastrophic over voltage event and then automatically res
Ideal for home theater systems
• 4 sets coax protection
• Phone line protection
• 1-line splitter
• RJ45 data line protection
Ultimate performance design
• s-OV technology
• V3 Advanced Surge Technology
• 80 dB EMI/RFI noise filtration
• 12 outlets
High performance design
• $1,000,000 connected equipment warranty
Built-in convenience
• 8 ft power cord
• 2 always on outlets
Surge protector
Theatre director 12 outlets
SPP4220WA/17
Specifications
Packaging
• Quantity: 1
• Gross Weight: 6.6 kg
• Tare Weight: 1.633 kg
• Net Weight: 4.967 kg
• Length: 55.9 cm
• Width: 20.1 cm
•Height: 50.5 cm
Outer Carton
• EAN/UPC/GTIN: 1 06 09585 13193 1
•Quantity: 2
• Gross Weight: 14.901 kg
• Tare Weight: .227 kg
• Net Weight: 14.447 kg
• Length (cm): 102.4 cm
• Width (cm): 21.3 cm
•Height (cm): 57.7 cm
Highlights
4 sets coax protection
Gold-plated connectors route the coaxial signal through the surge protector to protect the line from surges and spikes. Allows 4 cable devices to be plugged into the same unit. Gold connectors act to reduce noise (snow, vertical lines, etc) in picture and keep data safer from devices with cable modems.
Phone line protection
These connectors accommodate an RJ11 cord, routing the telephone line through the surge protector to guard against spikes and surges.
1-line splitter
These connectors route the telephone line through the surge protector and split the line to allow two devices to be connected. It offers the convenience of leaving two devices connected constantly even though they may not be used simultaneously
s-OV technology
This technology automatically senses an overvoltage and reacts quickly by completely disconnecting power from the main source, while continually delivering power to connected equipment from battery power. Power will be automatically reconnected to the main source once the surge event is over.
V3 Advanced Surge Technology
This new surge protection technology provides 27% greater surge protection capacity and better heat dissipation for safe, more reliable and longer lasting surge protection.
80 dB EMI/RFI noise filtration
Built-in filtering technology ensures the best performance from your components. It guards against signal interference and loss of data. The higher the dB rating the better the noise reduction.
12 outlets
Converts one outlet into 12 outlets allowing you to plug in multiple devices from one single AC outlet.
$1,000,000 equipment warranty
Protects your connected equipment for the life of the product.
8 ft power cord
Provides power to the unit which can be 8 feet from the AC outlet.
2 always on outlets
Two outlets that are not controlled by the master power switch. Constant power is maintained for devices like rechargers, fax machines, etc.
RJ45 data line protection
These connectors route the data line through the surge protector to protect against spikes and surges that may occur through the data line.
Issue date 2009-11-06
Version: 1.1.4
12 NC: 8670 000 29598 UPC: 6 09585 13193 4
© 2009 Koninklijke Philips Electronics N.V. All Rights reserved.
Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
www.philips.com
Loading...