Philips SPP4210WA-17 User Manual

Philips Surge protector

Theatre director

10 outlets

SPP4210WA

Home Theater System

5040 Joules

Simple, powerful and stackable this unique surge protector resides within your component case for easy access. Completely isolates connected equipment from the power source during a catastrophic over voltage event and automatically resets.

Ideal for home theater systems

• 3 sets gold coax protection

• Phone line protection

• 1-line splitter

• RJ45 data line protection

Ultimate performance design

• s-OV technology

• V3 Advanced Surge Technology

• 80 dB EMI/RFI noise filtration

• 10 outlets

• $750,000 connected equipment warranty

Built-in convenience

• 8 ft power cord

• Offset right-angle plug

• 2 always on outlets

Surge protector

Theatre director 10 outlets

SPP4210WA/17

Specifications

Packaging

• Quantity: 1

• Gross Weight: 6.554 kg

• Tare Weight: 1.633 kg

• Net Weight: 4.921 kg

• Length: 55.9 cm

• Width: 20.3 cm

•Height: 50.8 cm

Outer Carton

• EAN/UPC/GTIN: 1 06 09585 13192 4

•Quantity: 2

• Gross Weight: 14.787 kg

• Tare Weight: .227 kg

• Net Weight: 14.560 kg

• Length (cm): 102.9 cm

• Width (cm): 21.6 cm

•Height (cm): 57.7 cm

•

Highlights

3 sets gold coax protection

Gold-plated connectors route the coaxial signal through the surge protector to protect the line from surges and spikes. Allows 3 cable devices to be plugged into the same unit. Gold connectors act to reduce noise (snow, vertical lines, etc) in picture and keep data safer from devices with cable modems.

Phone line protection

These connectors accommodate an RJ11 cord, routing the telephone line through the surge protector to guard against spikes and surges.

1-line splitter

These connectors route the telephone line through the surge protector and split the line to allow two devices to be connected. It offers the convenience of leaving two devices connected constantly even though they may not be used simultaneously

RJ45 data line protection

These connectors route the data line through the surge protector to protect against spikes and surges that may occur through the data line.

s-OV technology

This technology automatically senses an overvoltage and reacts quickly by completely disconnecting power from the main source, while continually delivering power to connected equipment from battery power. Power will be automatically reconnected to the main source once the surge event is over.

V3 Advanced Surge Technology

This new surge protection technology provides 27% greater surge protection capacity and better heat dissipation for safe, more reliable and longer lasting surge protection.

80 dB EMI/RFI noise filtration

Built-in filtering technology ensures the best performance from your components. It guards against signal interference and loss of data. The higher the dB rating the better the noise reduction.

10 outlets

Converts one outlet into ten outlets allowing you to plug in multiple devices from one single AC outlet

$750,000 equipment warranty

Protects your connected equipment for the life of the product.

8 ft power cord

Provides power to the unit which can be 8 feet from the AC outlet.

Offset right-angle plug

This flat and angled design conveniently directs the cord away from the lower outlet and allows furniture to sit more closely to the wall.

2 always on outlets

Two outlets that are not controlled by the master power switch. Constant power is maintained for devices like rechargers, fax machines, etc.

Issue date 2009-11-06

Version: 1.1.4

12 NC: 8670 000 29597 UPC: 6 09585 13192 7

Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

www.philips.com