Philips SPP4104WA-17 User Manual

Philips Surge protector

Home theater

10 outlets

SPP4104WA

Home Theater System

4300 Joules

Designed for the home theater enthusiast, this advanced surge protector uses Pure Power technology which filters EMI/RFI noise so only clean power enters your electronic equipment. Keeps your picture sharp, data reliable and sound clear.

Ideal for home theater systems

• 3 sets gold coax protection

• Phone line protection

• 1-line splitter

• RJ45 data line protection

Ultimate performance design

• Power blocker

• 70 dB EMI/RFI noise filtration

• 10 outlets

• $500,000 connected equipment warranty

Built-in convenience

• 10 ft power cord

• Offset right-angle plug

• Protection indicator light

Surge protector

Home theater 10 outlets

SPP4104WA/17

Specifications

Packaging

• Quantity: 1

• Gross Weight: 1.429 kg

• Tare Weight: .227 kg

• Net Weight: 1.202 kg

• Length: 41.3 cm

• Width: 21.3 cm

•Height: 10.2 cm

Outer Carton

• EAN/UPC/GTIN: 1 06 09585 13202 0

•Quantity: 6

• Gross Weight: 9.026 kg

• Tare Weight: .454 kg

• Net Weight: 8.572 kg

• Length (cm): 62.2 cm

• Width (cm): 22.5 cm

•Height (cm): 43.1 cm

•

Highlights

3 sets gold coax protection

Gold-plated connectors route the coaxial signal through the surge protector to protect the line from surges and spikes. Allows 3 cable devices to be plugged into the same unit. Gold connectors act to reduce noise (snow, vertical lines, etc) in picture and keep data safer from devices with cable modems.

Phone line protection

These connectors accommodate an RJ11 cord, routing the telephone line through the surge protector to guard against spikes and surges.

1-line splitter

These connectors route the telephone line through the surge protector and split the line to allow two devices to be connected. It offers the convenience of leaving two devices connected constantly even though they may not be used simultaneously

RJ45 data line protection

These connectors route the data line through the surge protector to protect against spikes and surges that may occur through the data line.

Power blocker

This automatic shutdown technology senses when the device has reached capacity and automatically shuts down electricity to your equipment. It protects against subsequent surges, even if you are not present

70 dB EMI/RFI noise filtration

Built-in filtering technology ensures the best performance from your components. It guards against signal interference and loss of data. The higher the dB rating the better the noise reduction.

10 outlets

Converts one outlet into ten outlets allowing you to plug in multiple devices from one single AC outlet

$500,000 equipment warranty

Protects your connected equipment for the life of the product.

10 ft power cord

Provides power to the unit which can be 10 feet from the AC outlet.

Offset right-angle plug

This flat and angled design conveniently directs the cord away from the lower outlet and allows furniture to sit more closely to the wall.

Protection indicator light

This LED alert lights up to indicate the surge protector is working properly.

Issue date 2009-11-06

Version: 1.2.5

12 NC: 8670 000 29608 UPC: 6 09585 13202 3

Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

www.philips.com