Philips SPF3071-G7 User Manual [en, es, fr]

Philips Digital PhotoFrame

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the company.

Disclaimer

The company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, the company reserves the right to revise this publication and tomake changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

Safety Instructions

Before operating the PhotoFrame, carefully read and follow the instructions below. Retain this User Manual for future reference.

• Read the safety and operating instructions carefully before using the product. All warnings on the product and in the operating instructions should be observed.

• Do not place this product under direct sunlight or near heat sources, such as in a closed car under sunlight or near a stove. The outer casing of this product may become deformed and the sophisticated sensors inside may become damaged due to excessive heat.

• Do not use this product near water, in the rain or allow any liquid to get inside this product. Water and moisture may cause short-circuit to the electronic components and lead to malfunctions.

EN-i

Philips Digital PhotoFrame

• Do not use this product near strong electromagnetic sources, such as a microwave oven. The electromagnetic interference may cause this product to malfunction.

• Do not drop or apply shock/vibration to this product. Strong impacts may damage the components inside.

• Do not insert objects other than compatible memory cards into the memory card slots of this product. The metal contacts inside the slot can easily become damaged by foreign objects.

• Do not use an unknown power adapter other than the one supplied with the PhotoFrame. Connecting this product to an unknown power adapter is very dangerous and may lead to fire or explosion.

• Do not cut, bend, modify, place heavy objects, or step on the power adapter cord. Otherwise the external insulation may be damaged and result in short-circuit or fire.

• If there are strange odors or heat emitting from this product or any signs of malfunction, disconnect the PhotoFrame from the power immediately and contact your dealer for inspection or service.

• Use a smooth, soft cloth to clean the surface of the screen. Do not use liquid cleaners or glass cleaners.

• Do not attempt to disassemble or modify this product. There are no user serviceable parts inside this product, and any unauthorized modifications will void the warranty.

• Although the LCD panel is made with high-precision technology and has effective pixels of 99.99% or more, black dots or bright points of light (red, blue or green) may appear constantly on the LCD panel. This is a structural property of the LCD panel and is not a malfunction.

EN-ii

Safety Instructions

Philips Digital PhotoFrame

Table of contents

Key features…………………………………………………….. What’s in the box………………………………………………. Overview………………………………………………………….

Right view………………………………………………….....

Rear view ………………………………………………….....

Operating the PhotoFrame…………………………………... Using the control buttons…………………………………… Using the remote control (These models only: SPF3480/ G7,SPF3480X/G7,SPF3480T/G7, SPF3400/G7, and

SPF3400X/G)……….…….…............................................

Getting started …………………………………………………. Step 1:Using the adjustable back stand ………………….. Step 2: Connecting to power……………………………….. Step 3: First usage…………………………………………...

Step 4:Basic setup…………………………………………....

Selecting a language……………………………………... Setting the date and time………………………………… Step 5: Copying photos to internal memory……………… Step 6: Connecting the PhotoFrame to a computer ……. Step 7: Replacing the paper mat………………..…………

Using the main menu ………………… …………………......

Managing photos …………………… ……………………......

Manually copying photos to the internal memory ……….. Tagging photos to an album………………………………… Removing photos from an album………………………… Managing photos by using the TIMELINE album……… Creating a new album ……………………………………… Modifying an album………………………………………… Deleting an album…………………………………………… Using other options in the PHOTO ALBUMS menu……... Deleting photos……………………………… ……………...

1 2

3 4

9 10 10 11 11 11 11 12 13 14

16 17

17 19 21 22 23 24 24 24 24

Table of contents

EN-iii

Philips Digital PhotoFrame

Rotating photos………………………………… …………….....

Applying photo effects……………………………………….......

Viewing photos…………………………………………...............

Running a slideshow by using the TIMELINE album ….........

Using Smart Energy Saver™……………………………….......

Using CLOCK (EZ Access button)………………………….....

Selecting a clock skin…………………………………………....

Switching between Clock view and Slideshow view……… ...

Using SCRAPBOOK……………………………………………...

Using SETTINGS………………………………………………....

Date and Time page………………………………………….....

General Settings page……………………………………….....

Information page………………………………………………...

Frequently asked questions …………………………………...

Regulation and compliance………………………………….....

Recycling………………………………………………...................

Appendix ………………………………………………………......

Specifications………………………………………………….....

For SPF3470/G7, SPF3480/G7, SPF3400/G7 series….........

28 29

29 30

30 31

32 33 34

34 35

EN-iv

Table of contents

Philips Digital PhotoFrame

Dear Customer:

Thank you for bringing our Philips Digital PhotoFrame into your home. Now you will be able to view your growing digital picture library in stunning clarity and share great memories with friends and family.

To get the most out of your new Philips product, please read through this entire User Manual before use.

Key features

This PhotoFrame is equipped with the following features:

 &lear and bright display.  Enables you to display photos that are stored in the

internal memory, a memory card or a USB flash drive.  Allows you to select a preferred power-saving option for the PhotoFrame using the Smart Energy Saver™ feature.  Allows you to use albums to manage and sort your photos easily.  Allows you to display photos in slideshow using various kinds of templates available in S&5APB22K.

 Multi-language 2n-Screen Display 2SD menus.  &lock and &alendar functions.

Key features

EN-1

Philips Digital PhotoFrame

What’s in the box

Carefully open the packing box and ensure that you have the following items.

1. Digital PhotoFrame x 1

2. AC power adapter x 1

3. Remote control x 1 (These models only: SPF3480/G7,SPF3480X/G7, SPF3480T/ G7,SPF3400/G7 andSPF3400X/G7)

4. Quick Start Guide x 1

5. User Manual x 1

6. Registration Card x 1

7. Warranty Card x 1

8. Hook and loop tape for remote control x 1

User Menu

5 6 7

Registration Card

Warranty Card

3 4

Hook and loop tape

• Actual product appearance may vary from the illustrations shown in this User Manual.

• Available accessories may vary depending on the area where you purchased the PhotoFrame.

• The remote control is not included in the SPF3470/G7, SPF3470X/ G7 ,SPF3071/G7and SPF3470T/G7 models.

EN-2

What’s in the box

Philips Digital PhotoFrame

Overview

Rightview

2 3 5

4 6

Description

No.

Adjustable back stand

Power button

Press the Power button to turn on/off the PhotoFrame.

USB port

Allows for a USB flash drive.

 Play back photos stored in the inserted drive  Copy photos from the inserted drive to the PhotoFrame.

Mini USB port

Allows you to connect the PhotoFrame to a computer to manage the files in the internal memory of the PhotoFrame.

Memory card slot

Allows for an SD™/SDHC™, MultiMediaCard™ (MMC), Memory Stick™ (MS), Memory Stick PRO™ (MS PRO), Memory Stick Duo™ (MS Duo) memory card.

 Play back photos stored in the inserted card  Copy photos from the inserted card to the PhotoFrame.

Power jack

Connect one end of the AC power adapter into the power jack and the other end into a power outlet.

Recommended Remote control storage

Use the hook and loop tape included to store your remote control

Rightview

EN-3

Philips Digital PhotoFrame

Rear View

3 4

EN-4

Description

No.

MENU button

See "Using the control buttons" on page 6 for details.

EZ Access button

See "Using the control buttons" on page 6 for details.

ESC button (ESCAPE button)

See "Using the control buttons" on page 6 for details.

Scroll wheel/OK button

See "Using the control buttons" on page 6 for details.

Kensington® security slot

You can attach an anti-theft Kensington® lock and cable to this slot to help prevent possible theft.

Rear View

Philips Digital PhotoFrame

Description

No.

EZ Lock System

You can use the EZ Lock Screws to lock or unlock the wooden frame.

Wall mount hole (for landscape wall mounting)

Allows you to hang the PhotoFrame horizontally on a wall.

Wall mount hole (for portrait wall mounting)

Allows you to hang the PhotoFrame vertically on a wall.

Recommended Remote control storage

Use the hook and loop tape included to store your remote control.

Operating the PhotoFrame

You can use the control buttons on the back or the supplied remote control to operate the photo frame

• In this user manual, instructions or examples provided are based upon operation with the remote control. To know how to use the control buttons, refer to "Using the control buttons" on page 6 for details.

• The remote control is supplied with the SPF3480/G7, SPF3480X/G7, SPF3480T/G7, SPF3400/G7, and SPF3400X/G7 models only.

Operating the PhotoFrame

EN-5

Philips Digital PhotoFrame

Using the control buttons

EN-6

No.

Icon

ESC

Description

ESC button (ESCAPE button)

Cancels current operation and/or returns to the previous page

Scroll wheel/ OK button

• Press this button to enter or confirm your operation/selection.

• Scroll this button to the left to select the previous item.

• Scroll this button to the right to select the next item.

MENU button

Displays the pop-up menu.

EZ Access button

Switches between Clock view and Slideshow view

Operating the PhotoFrame

Philips Digital PhotoFrame

Using the remote control (These models only: SPF3480/G7, SPF 3480X/G7, SPF3480T/G7, SPF 3400/G7and SPF3400X/G7)

Place the hook and loop tape on back of the PhotoFrame for remote storage

hook and loop tape1

hook and loop tape2

Operating the PhotoFrame

EN-7

Philips Digital PhotoFrame

Getting started

Step 1: Using the adjustable back stand

1. Gently pop out the back stand as shown below.

2. To place the PhotoFrame horizontally or vertically, you can rotate the back stand by aligning the triangle mark with the rounded points (1 or 2).

Getting started

EN-9

Philips Digital PhotoFrame

3. Pull out the back stand and adjust accordingly to the preferred viewing angle.

• It is recommended to place the PhotoFrame horizontally, because this direction provides the best viewing and operating experience.

• By using the wall mount holes, you can hang the PhotoFrame horizontally or vertically on the wall.

Step 2: Connecting to power

1. Place the PhotoFrame on a flat surface.

2. Connect the power adapter as below (1), and press the Power button to turn on the PhotoFrame (2)

• Power systems and plug types may vary depending on yourcountry/region.

• To turn off the PhotoFrame, press the Power button.

EN-10

Getting started

Philips Digital PhotoFrame

Step 3: First usage

To help you get the most out of your PhotoFrame, we installed a video tutorial that automatically starts playing when you first turn on your unit. To cancel the looping video and start playing your own photos, press any of the buttons on the back. Follow the five-step process to familiarize yourself with how the control buttons work. This simple process is automatically disabled after the first use. You can turn on the tutorial by going into SETTINGS.

Step 4: Basic setup

Select a language and set the date and time during the first use of the PhotoFrame.

Selecting a language

1. In the main menu, press or to select SETTINGS , and then press“OK”

2. Press The General Settings page appears.

3. Press“OK”, press to go to Language, and then press again.

4. Press or to select a language you wish to use, and then press“OK”

5. Press “ESC” to exit

Setting the date and time

1. In the main menu, press or to select SETTINGS , and then press“OK”. The Date and Time page appears.

Getting started

EN-11

Philips Digital PhotoFrame

2. Press“OK” to highlight the Year field, press or to select a year, and then press“OK” to confirm the setting

3. Press to move to move to the Month field, press“OK” to highlight the Month field, press or to select a month, and the press“OK” to confirm the setting.

4. Repeat Step 3 for the remaining fields, including Date, Hour, Minute, Mode, On Screen Clock, Current Time Zone and Second Time Zone.

5. Press “ESC” to exit

When inserting a memory card or a USB flash drive, you will be asked to copy all photos to the internal memory.

If “Smart Copy” is set to “Resize” under “General Settings”, photos will be resized to the screen resolution when copied to the internal memory to optimize the storage capacity. Please keep a copy of the original photos on

your memory card or USB flash drive.

"Smart Copy" is designed

 To copy all photos contained in the inserted memory card (or USB flash drive), select the check mark and press “OK” to proceed.  To view photos without copying them to the PhotoFrame, select the cross mark and press“OK”. The PhotoFrame will start playing back the photos automatically from the inserted memory card or USB flash drive.

EN-12

Getting started

Philips Digital PhotoFrame

• Do not remove the memory card/USB flash drive before the copy process is completed.

• If the files you wish to copy from the memory card/USB flash drive already

exists in the internal memory of the PhotoFrame, the files will be overwritten when you select to proceed.

Compatible memory card formats :

Memory card format

SD/SDHC MultiMediaCard(MMC) Memory Stick(MS) Mcmory Stick PRO(MS PRO) Memory Stick Duo(MS Duo) USB flash drive

• Maximum capacity specification listed above are subject to change without prior notice

Maximum capacity

32GB 1GB 4GB 2GB 2GB 16GB

Step 6: Connecting the PhotoFrame to a computer

You can connect the PhotoFrame to a computer using a mini USB cable (to be purchased separately) to easily manage the files in the internal memory of the PhotoFrame.

1. Start the computer and turn on the PhotoFrame.

2. Connect the smaller end of the USB cable to the mini USB port of the PhotoFrame.

3. Connect the other end of the USB cable to a USB port on the computer, making sure the connectors are fully inserted.

4. Once connected, the PhotoFrame will enter PC transfer mode automatically.

5. When the computer has detected the PhotoFrame, the PhotoFrame will appear in “My Computer” as “removable disk”.

6. Now you can freely transfer the files in the PhotoFrame as you would on other disk drive.

EN-13Getting started

Philips Digital PhotoFrame

• You can copy photos from the computer to the PhotoFrame, and vice versa.

• The files in the memory cards and USB flash drive cannot be viewed/edited via USB connection.

Step 7: Replacing the paper mat

Your PhotoFrame may come with one or more bonus paper mats depending on your purchased model. You can replace the existing paper mat with the one supplied (if available). Follow the instructions below to replace the supplied paper mat.

1. On a flat table, place the PhotoFrame facing down on top of a soft towel. Be careful not to scratch the unit.

2. Twist the EZ Lock Screws on the back of the PhotoFrame to the “UNLOCK” position, then carefully lift up the core unit from the wood frame.

EN-14

Getting started

Philips Digital PhotoFrame

3. Remove the existing paper mat.

4. Install the supplied bonus paper mat.

5. Install the PhotoFrame to the wooden frame, and secure the PhotoFrame by tightening the EZ Lock Screws to the “LOCK” position.

EN-15Getting started

Philips Digital PhotoFrame

Using the main menu

From the main menu, you can scroll to select the desired option, and then press “OK”. To exit back back to the main menu, press "ESC".

Description

No.

Smart Energy Saver™

Allows you to select a power-saving option for the PhotoFrame. See "Using Smart Energy Saver™" on page 28 for details.

Clock & Calendar

Allows you to set your favorite clock skins. See "Using CLOCK (EZ Access button)" on page 29 for details.

SCRAPBOOK

Allows you to display photos in slideshow with various preloaded templates. See "Using SCRAPBOOK on page 30 for details.

EN-16

Using the main menu

Philips Digital PhotoFrame

DescriptionNo.

SLIDESHOW

Allows you to display photos in slideshow. See "Viewing photos" on page 25 for details.

PHOTO ALBUMS

Allows you to manage your photos and sort them by using different albums. See "Managing photos" on page 17 for details.

SETTINGS

Allows you to configure the settings of the PhotoFrame. See "Using SETTINGS" on page 31 for details.

Managing photos

You can use the PHOTO ALBUMS menu to manage photos in the internal memory, memory card or USB flash drive.

Manually copying photos to the internal memory

In addition to the automatic “Smart Copy” feature , you can manually copy photos from external storage devices to the internal memory and tag photos to an album.

The example below demonstrates how to copy photos from a memory card to the internal memory and tag photos into an album.

1. Insert a compatible memory card to the memory card slot.

2. In the main menu, press or to select PHOTO ALBUMS, and then press “OK”

3. Select Memory Card, and then press “OK”, The screen shows the photos contained in your memory card

Managing photos

EN-17

Philips Digital PhotoFrame

4. If there is more than one page, you can press or to go to the previous or next page to browse photos. (If not, skip this step.)

5. Press “OK” to enable the selection mark

6. Press or to move to the photo you wish to select, and then press “OK” to confirm the selection. The selected photo will have a selection mark

Repeat Step 6 to select more photos as desired.

If you wish to select all the photos shown on the current page, select “Select All” in the pop-up menu and press “OK”. Then continue with Step 7.

7. Press “Menu”

8. From the pop-up menu, press or to select Tag It, and then press “OK”

EN-18

Managing photos

Philips Digital PhotoFrame

9. Select a default target album to copy and sort the photos into this specified album.

Tagging photos to an album

1. In the main menu, press or to select PHOTO ALBUMS, and then press “OK”. The screen shows:

• The file source, including USB, Memory Card and

Internal Memory.

• The default albums in the internal memory, including TIMELINE, Pre-install, Uncategorized, Family,

Friend and Vacation.

• The “USB” and “Memory Card” file sources will only appear when a USB

flash drive and a memory card have been inserted to the PhotoFrame.

• For details about the “TIMELINE” album, see "Managing

photos by using the TIMELINE album" on page 22.

2. Press or to select the source Press or to select the source of your photos, such as the Internal Memory album, and then press “OK”. (You can also select USB or Memory Card, if available.)

Managing photos

EN-19

Philips Digital PhotoFrame

The screen shows all the photos that are available in the internal memory.

3. If there are more than one page, you can press or to go to the previous or next page to browse photos (If not, skip this step.)

4. Press“OK” to enable the selection mark

5. Press or to move to the photo you wish to select, and then press“OK” to confirm the selection. The selected photo will have a selection mark.

Repeat Step 6 to select more photos as desired.

6. Press “MENU”

If you wish to select all the photos shown on the current page, select “Select

All” in the pop-up menu and press”OK”. Then proceed to Step 7.

7. From the pop-up menu, press or to select Tag It, and then press“OK”

EN-20

Managing photos

Philips Digital PhotoFrame

8. Select the destination album for the photos to be stored

Removing photos from an album

1. In the PHOTO ALBUMS menu, press or to select

an album from which you want to remove the photos,

and then press“OK”. The screen shows the photos in the album.

2. Press “OK” to enable the selection mark

3. Press or to move to the photo you wish to select, and then press“OK” to confirm the selection. The selected photo will have a selection mark.

Repeat Step 3 to select more photos as desired.

4. Press “MENU”.

If you wish to select all the photos shown on the current page, select

“Select All” in the pop-up menu and press“OK”. Then proceed to

Step 5.

5．From the pop-up menu, press or to select Uncategorized, and then press “OK”.

The photos will be removed from the album, but will not be deleted from the internal memory.

Managing photos

EN-21

Philips Digital PhotoFrame

Managing photos by using the TIMELINE album

In PHOTO ALBUMS, you can use the TIMELINE album to search for photos in the internal memory according to the time span specified.

1. In the PHOTO ALBUMS menu, press or to select TIMELINE, and then press “OK”

2. Press “OK”. When the marks appear, press or to adjust the settings in the Year field, and then press again.

In this step, you can also search for photos taken in a specific period of time under the TIMELINE album by pressing MENU and selecting the time frame.

3. Press to move to the Month field, and repeat Step 2 to adjust the settings.

EN-22

Managing photos

Philips Digital PhotoFrame

4. Press to move to , and then press “OK” to start playback. The photos taken in the time span you specified above will appear on the screen.

Creating a new album

1. In the PHOTO ALBUMS menu, press “OK” to select “+”, and then press “OK” to Create Album.

2. In the Album Name field that appears, use the on-screen keyboard to enter a desired name.

 Press or to select a letter, and then press “OK” to enter the letter.

 Press MENU to toggle between letters and numbers.  To add a space, press or to move to Space, and

then press “OK”.

3. Now the new album is created.

The PhotoFrame allows you to create up to 12 custom albums.

Managing photos

EN-23

Philips Digital PhotoFrame

Modifying an album

1. In the PHOTO ALBUMS menu, press or to select an album for which you wish to modify the album name, and then press MENU .

2. Select Edit Name, and then press “OK”

3. In the Album Name field that appears, use the on-screen keyboard to enter a desired name.

4. Once you have finished editing the album name, press ESC to exit.

Deleting an album

1. In the PHOTO ALBUMS menu, press or to select an album that you wish to delete, then press MENU.

2. Select Delete Album, and then press “OK”.

Default albums including TIMELINE, Pre-installed Library,

Uncategorized, Family, Friends and Vacation cannot be deleted.

Using other options in the PHOTO ALBUMS menu

Deleting photos

1. In the PHOTO ALBUMS menu, press or to select an album, and then press “OK”.

2. Press “OK” to enable the selection mark

3. Press or to move to the photo you wish to select, and then press “OK” to confirm the selection. The selected photo will have a selection mark.

Repeat Step 3 to select more photos as desired.

EN-24

Managing photos

+ 98 hidden pages