Page 1
Model No.: SPF1002B/G7, SPF1002R/G7, SPF1002N/G7 and SPF1002P/G7
Personalized Key Chain
User’s Manual
Features
1.5 inch LCD screen
Supports JPEG, BMP and GIF - still digital photo formats
Automatic slide show
Customizable settings
Built-in rechargeable lithium battery
Contents of the Package
Digital Picture Frame
User Manual
USB cable
Keychain
Button Description
V1.1
- 1 -
Page 2
① Keychain attachment.
② Previous –go to the previous picture or menu item.
③ Next –go to the next picture or menu item.
④ Menu–displays the main menu, or confirms your menu item selection.
⑤ LCD Display – displays photos and menus.
⑥ USB port –connect to a computer using the provided USB cable.
⑦ Reset –resets the unit when it freezes or stops responding.
Charge the Battery Before 1stUse
This device has a built-in rechargeable battery. It comes per-charged from the
factory, but for optimal performance during your first use, it is recommended to
charge the battery fully before using the PhotoFrame for the first time. To charge
the battery, connect the included USB cable to the device and to a USB port on
your computer. If you do not have a computer, you will need to use a separate
USB/AC charger, commonly found at cell-phone stores. While charging, a battery
symbol will appear on-screen. When the battery image is static and full, the charge
is complete. It may take up to 3 hours for a complete charge.
Power On/Power Off
To turn ON the device, press and hold down the MENU (4) button for 3 seconds.
To turn OFF the Device either:
1. Press and hold down the MENU (4) button for 3 seconds.
Or
2. Briefly press the MENU (4) button to display the PhotoFrame’s menu. Press the
“NEXT” (3) (“ ”) button repeatedly until the "Power Off" menu item is highlighted.
Press the MENU (4) button again to confirm.
Transferring Photos from a Computer to the PhotoFrame
Note: Your Key Chain PhotoFrame comes with 8MB of internal memory, which
can hold up to a 100 pictures depending on their size.
How to Connect the PhotoFrame to your Computer:
1) Connect the PhotoFrame to a USB port on your computer using the included
USB cable. You can add up to 100 pictures depending upon file size
2) Briefly press the MENU (4) button on the PhotoFrame to display the menu.
3) Select “USB Connect”from the list of menu items. Press the MENU (4) button
to confirm. A submenu will appear with a choice of “yes” or “no.”
- 2 -
Page 3
4) Select “Yes” to connect to the computer. Press the MENU (4) button to
confirm.
5) Once the unit is connected to the computer, DPFMate, the image file
transfer utility, will run automatically. If DPFMate does not appear, do the
following: In the Windows start menu, go to “My Computer,”and find the drive
letter of the PhotoFrame. Double click on the PhotoFrame drive (or right-click
and choose “Explore”) to reveal the PhotoFrame’s files. Find the DPFMate
application. Double click on DPFMate to run the application.
6) Using the DPFMate Utility to Transfer Photos to the PhotoFrame.
a. In the left upper pane, select a file from your computer that you would like
to copy and transfer to your PhotoFrame. The selected file is previewed
on the left lower panel.
b. Edit the selected picture in the preview panel.
Click the “+” button to zoom in or the “-“button to zoom out the view of
the photo.
The selection frame shows you what part of the photo will appear on
the picture frame display. Click your mouse and drag the selection
frame to choose the desired area of the picture.
Click RotateL or RotateR to rotate the picture left or right.
c. Click the “Add” button, or double-click on the previewed picture to add it
to the list of photos to be downloaded. The photo will appear in the right
pane.
d. Click “Save All”to save the pictures you have chosen to download to the
PhotoFrame.
- 3 -
Page 4
e. Click “Download”to download all files that appear in the right pane to the
digital photo frame.
f. Wait until the download is complete before disconnecting the PhotoFrame
from the computer.
could damage the PhotoFrame.
To upload files from the photo frame:
Find the desired photo in the right pane. Click on the photo, then click the
“Save” button to save it to the computer. To upload all photos, click the “Save
All”button to save all of the displayed photos to your computer.
To delete one file from the digital photo frame: Select a photo in the right
pane, then click “Delete.”
To delete all files: click the “All”button to select all files. With all photos
selected, click the “Delete” button to delete all files.
6) After the file upload has finished, you can safely disconnect the unit from the
computer.
WARNING:
images. Doing so may result in damage to the PhotoFrame and will void the
warranty
NOTE:
Using your PhotoFrame
NOTE: Before you can view photos on your PhotoFrame, you must charge the
battery fully and download photos from your computer.
To view photos, press and hold the MENU(4) button to turn on the device. Photos
should appear immediately on the LCD screen. If you have chosen “auto slide
show”the photos will change at the desired intervals. If the PhotoFrame is in
manual mode, briefly press the NEXT(3)(“ ”) button to view the next picture or
press the PREVIOUS (2) (“ ”) button to return to the previous picture.
System Settings
To set up and customize your PhotoFrame, briefly press the MENU(4) button to
display the menu. Press the PREVIOUS(2) (“ ”) or NEXT(3) (“ ”) button to
select a menu item, and press the MENU button to confirm your selection. A
submenu will appear.
Below is a list of menu items and their submenus with the corresponding
customized device settings.
Do not disconnect the USB cable during reading or downloading of
.
The DPF will be formatted the first time when it is connected to a PC.
Disconnecting prior to completion of the download
- 4 -
Page 5
Menu Submenu
USB Connect ·Yes - Connects to the computer.
Slide Show ·On –Enables the auto slide show feature. Set the time
Clock ·Digital Clock –Displays the current date and time
Auto OFF ·On –Set the length of time the device is idle after which
Backlight Sets brightness of the LCD display.
Contrast Sets contrast of the LCD display.
Delete ·Delete One –Deletes the current picture from the
Power Off Turns off the device.
Language Selectable: English, Spanish and French
Version Displays the softwrare version information
Exit Exits the menu.
·No –Disconnects from the computer.
interval between slides.
·Off –Disables the auto slide show feature and enables
manual mode.
·Cancel –Exit to previous menu screen
on-screen in 12hr or 24hr format.
·Analog Clock –Displays the time on-screen as an analog
clock.
·Set Clock –Set the date and time. Press the MENU button
to switch between Year, Month and Day. Press the “ ”
or “ ”button to change the date and time.
·Calendar –Displays the calendar on-screen .
·Cancel –Exit to the previous menu screen.
the device turns off automatically.
·Off –Disables auto off.
·Cancel –Exit to the previous menu screen.
PhotoFrame.
·Delete All –Deletes all pictures from the PhotoFrame.
·Cancel –Exit
.
Frequently Asked Questions & Troubleshooting Guide
The following section will help you to troubleshoot problems, and answer common
questions about the PhotoFrame. If the following answers fail to solve your problem,
please contact customer service. Never attempt to disassemble the device, as this
will void the warranty.
- 5 -
Page 6
1.Question: What photo formats can be displayed on the PhotoFrame?
Answer: The PhotoFrame can display digital photos that are stored in the
JPEG/BMP/GIF (still) format; TIFF or RAW digital camera photo formats are not
supported.
2. Question: What should I do if the photos do not download to the
PhotoFrame?
Answer: If there is no transfers of photos occurring from the PC to the PhotoFrame,
disconnect the PhotoFrame from the computer. Then reconnect it to the computer
and try again.
3. Question: What do I do if the frame freezes up or does not respond to
button presses?
Answer: Reset the device. Place the end of an opened paper clip into the “reset”
hole on the bottom of the PhotoFrame. Push it in for 3 seconds then release. This
will reset the device to all of the default settings
Technical Specifications
USB Interface USB2.0（full speed）
Built-in Internal Memory 8MB (Nor Flash)
Photo Format JPEG/BMP/GIF(still)
Supported Language English, Spanish and French
Play Mode Auto slide show / manual
Display 1.5-inch CSTN screen, 128 x 128 pixels
Charge time About 3h
Standby time About 8h-10h
Battery Type Rechargeable lithium-ion battery
Storage Temp* -20℃ ～ +65℃
Ambient Temp* 0℃ ～ +55℃
Operation Relative Humidity* 20% ～ 90%（40℃）
Storage Relative Humidity* 20% ～ 93%（40℃）
Item Description
- 6 -
Loading...