Philips SPA4270BT-37 User Manual

Always there to help you

Question?

Contact

Philips

Register your product and get support at

www.philips.com/welcome

SPA4270BT

User manual

Contents

1 Important 2

Safety 2
Notice 4

2 Your multimedia speaker 5

Get started 5

3 Play 6

Play through Bluetooth 6
Play through the audio cable 6
Control Play 7

4 Product information 8

5 Troubleshooting 9

English

EN

1

1 Important

Safety

This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause
an electrical shock. For the safety of
everyone in your household, please
do not remove product covering.

The ‘exclamation point’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.

d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation

openings. Install in accordance with
the manufacturer’s instructions.

h Do not install near any heat sources

such as radiators, heat registers,
stoves, or other apparatus (including

ampliers) that produce heat.

i Do not defeat the safety purpose of

the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.

If the provided plug does not t into

your outlet, consult an electrician for
replacement of the obsolete outlet.

Warning

To reduce the risk of fire or electric shock, this

•

apparatus should not be exposed to rain or moisture
and objects filled with liquids, such as vases, should not
be placed on this apparatus.
To completely disconnect the power input, the mains

•

plug of the product shall be disconnected from the
mains.
The mains plug of the product should not be

•

obstructed OR should be easily accessed during
intended use.

• No naked ame sources, such as lighted candles, shall

be placed on the products.

Important Safety Instructions

a Read these instructions.
b Keep these instructions.
c Heed all warnings.

2 EN

j Protect the power cord from being

walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.

k Only use attachments/accessories

specied by the manufacturer.

l Unplug this apparatus during

lightning storms or when unused
for long periods of time.

m Refer all servicing to qualied service

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,

the apparatus has been exposed to
rain or moisture, does not operate
normally, or has been dropped.

n Apparatus shall not be exposed

to dripping or splashing.

o Do not place any sources of

danger on the apparatus (e.g. liquid

lled objects, lighted candles).

p Where the MAINS plug or an

appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.

Warning

• Never remove the casing of this unit.

• Never lubricate any part of this unit.

• Place this unit on a at, hard and stable surface.

• Never place this unit on other electrical equipment.

• Keep this unit away from water, moisture and liquid-

lled objects.

• Keep this unit away from direct sunlight, naked ames

or heat.

Notice for the USA

This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.

However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:

• Relocate the receiving antenna.

• Increase the separation between

equipment and receiver.

• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced
radio/TV technician for help.

This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:

• This device may not cause harmful
interference, and

• This device must accept any interference
received, including interference that may
cause undesired operation.

This equipment complies with FCC’s and IC’s
RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.

Notice for Canada

This device complies with Industry Canada
licence-exempt RSS standard(s): Operation is
subject to the following Two conditions:(1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.

CAN ICES(B)/NMB-3(B)

English

EN

3

Notice

Class II equipment symbol:

Any changes or modications made to this

device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.

Disposal of your old product and
batteries

Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.

Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences
on the environment and human health.

Your product contains batteries, which cannot
be disposed of with normal household waste.

Please inform yourself about the local
rules on separate collection of batteries.
The correct disposal of batteries helps
prevent potentially negative consequences
on the environment and human health.

Please visit www.recycle.philips.
com for additional information on
a recycling center in your area.

Environmental information

All unnecessary packaging has been omitted.
We have tried to make the packaging easy
to separate into three materials: cardboard
(box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)

Your system consists of materials which
can be recycled and reused if disassembled
by a specialized company. Please observe
the local regulations regarding the
disposal of packaging materials, exhausted
batteries and old equipment.

CLASS II apparatus with double insulation, and
no protective earth provided.

Note

• The type plate is located on the back panel of the right

speaker.

4 EN

2 Your multimedia

speaker

Congratulations on your purchase
and welcome to Philips!

To fully benet from the support that

Philips offers, register your product
at www.philips.com/welcome.

Get started

Caution

• Use of controls or adjustments or performance of

procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

Always follow the instructions in
this chapter in sequence.

Installation

1 Insert the RCA cable from the left speaker

to the SPEAKER OUT socket on the right
speaker.

2 Connect the AC plug to AC power socket.

English

EN

5

3 Play

Play through Bluetooth

The multimedia speaker uses Bluetooth
wireless technology to stream music from
your portable device to the system.

3 Play audio with the media player of your

device.

» The audio comes out through the

multimedia speaker.

» Next time you switch on Philips

SPA4270BT, the speaker connects to

the last paired device automatically.

» To connect Philips SPA4270BT to

another Bluetooth device, switch off
Bluetooth on current Bluetooth device.

Note

• Your Bluetooth device should be with Bluetooth

software of version 2.1 or above.

• Before you connect a Bluetooth device to this

multimedia speaker, familiarize yourself with the
Bluetooth capabilities of the device.

• Keep this multimedia speaker away from other

electronic devices that may cause interference.

• Make sure that the multimedia speaker is installed

properly before using.

1 On the side panel of the right speaker,

rotate the VOL knob clockwise.

» Bluetooth will be activated

automatically.

» The LED indicator on the multimedia

speaker blinks.

• To switch off the speaker, rotate
the VOL knob counter-clockwise,
until you hear one click.

2 On your Bluetooth device, activate

Bluetooth and search for Philips
SPA4270BT.

• For the rst-time connection, select

Philips SPA4270BT to start pairing.

» For some devices, you may need to

input “0000” as pairing password.

» If connection is successful, you will hear

double beep conrmation.

» The LED indicator lights in blue.

Tip

• The effective operation range between the multimedia

speaker and the paired device is approximately 10
meters (30 feet).

• Any obstacle between the speaker and the device can

reduce the operational range.

Play through the audio cable

Note

• Make sure that the multimedia speaker is installed

properly before using.

You can also play music from an external
audio device, such as a computer,
mobile phone, MP3 player, etc.

1 Connect the 3.5mm audio in cable (xed

to the AUX-IN socket on the right
speaker) to the headphone socket on the
external device.

» SPA4270BT exits Bluetooth pairing

mode when the audio cable is
connected to an external audio device.

2 On the side panel of the right speaker,

rotate the VOL knob clockwise.

» The LED indicator on the multimedia

speaker turns on stably.

3 Play music from the device.

• After use, rotate the VOL knob
counter-clockwise to switch off the
multimedia speaker and unplug.

6 EN

Control Play

To increase or decrease volume,

• When the multimedia speaker is turned on,
rotate the VOL knob on the side panel of
the right speaker to adjust the volume.

To adjust bass or treble level,

• Rotate the BASS knob on the back panel
of the right speaker to adjust the bass.

• Rotate the TREBLE knob on the back
panel of the right speaker to adjust the
treble.

English

EN

7

4 Product

information

AC power

Input 120V~, 60Hz

150mA

Operation power
consumption

Standby power consumption <1W
Dimensions (W x H x D) 143 x220 x

Bluetooth version V3.0

System Requirements:

PC Mac

Windows® 98SE, Windows® ME,
Windows® 2000, Windows® X P,
or Windows® Vista™, Windows 7

15W

150 mm

Mac OS9/
OS® X,
or later

8 EN

5 Troubleshooting

To keep the warranty valid, never try
to repair the system yourself.

If you encounter problems when using the
product, check the following points before
requesting service. If the problem remains
unsolved, register your product and get
support at www.philips.com/support.

• Make sure that the speakers are correctly
installed.

• Make sure the LED lights up.

English

EN

9

P&F USA Inc.

PO Box 2248

Alpharetta, GA 30023-2248

Phone [phone]

Meet Philips at the Internet

http://www.philips.com/welcome

2014 © WOOX Innovations Limited.
All rights reserved.
This product was brought to the market by WOOX
Innovations Limited or one of its affiliates, further referred to in
this document as WOOX Innovations, and is the manufacturer
of the product. P&F is the warrantor in relation to the product
with which this booklet was packaged. Philips and the Philips
Shield Emblem are registered trademarks of Koninklijke Philips
N.V.

SPA4270BT_37_UM_V2.0