Philips SM8889/00 user manual [uk]

EN USER MANUAL

CS UŽIVATELSKÁ PŘIRUČKA CNR UPUTSTVO ZA KORISNIKE DA BRUGERVEJLEDNING DE BENUTZERHANDBUCH ET KASUTUSJUHEND ES MANUAL DEL USUARIO FR MODE D’EMPLOI HR KORISNIČKI PRIRUČNIK IT MANUALE UTENTE LV LIETOT JA ROKASGR MATA LT NAUDOTOJO VADOVAS HU FELHASZNÁLÓI KÉZIKÖNYV NL GEBRUIKSAANWIJZING NO BRUKERHÅNDBOK PL INSTRUKCJA OBSŁUGI PT MANUAL DO UTILIZADOR RO MANUAL DE UTILIZARE SQ MANUALI I PËRDORIMIT SL UPORABNIŠKI PRIROČNIK SK NÁVOD NA POUŽITIE SR УПУТСТВО ЗА КОРИШЋЕЊЕ FI KAYTTÖOPAS SV ANVÄNDARHANDBOK EL ΕΓΧΕΙΡΊΔΙΟ ΧΡΉΣΗΣ BG РЪКОВОДСТВО ЗА ПОТРЕБИТЕЛЯ MK КОРИСНИЧКО УПАТСТВО

RU РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

UK ПОСІБНИК КОРИСТУВАЧА KK ПАЙДАЛАНУШЫ НҰСҚАУЛЫҒЫ

Le respect du Café Уважение к кофе

WWW.SAECO.COM/CARE

A2A1

A4A3

A12

A11

A10

A28 A29 A30

A27A25A24 A26

A13

A22 A20A21

A23

A19

A16

A14

A15

A18

A17

A5 A6

Drinks

Espresso

Cappuccino

Latte MacchiatoCaCo ee

iii

Se le ct yo ur dri nk

Xelsis DELUXE: SM8780, SM8782, SM8785

Espresso

Cappuccino

Latte Macchiato

Ca è LatteiCo ee

u Lait

Drinks

Se le ct yo ur d ri nk

Xelsis SUPREMA: SM8885, SM8889

B3 B4 B5 B6 B8 B9B7

C3 C4 C5 C6 C8 C9C7

A7A22A23A24 A29 A9 A10 A20 A25 A26A19A1 A21A12

English 4 Čeština 25 Crnogorski 47 Dansk 69 Deutsch 90 Eesti 114 Español 136 Français 159 Hrvatski 182 Italiano 204 Latviešu 227 Lietuviškai 248 Magyar 270 Nederlands 292 Norsk 314 Polski 335 Português 358 Română 381 Shqip 403 Slovenščina 426 Slovensky 448 Srpski 471 Suomi 493 Svenska 515

Ελληνικά

537 Български 560 Македонски 584 Русский 608 Українська 633

Қазақша

656

English

Contents

Machine overview (Fig. A) ____________________________________________________________________________ 4 Control panel _________________________________________________________________________________________ 5 Introduction __________________________________________________________________________________________ 5 Special functions _____________________________________________________________________________________ 6 Brewing drinks________________________________________________________________________________________ 7 Adjusting machine settings __________________________________________________________________________ 11 AquaClean water filter _______________________________________________________________________________ 12 Removing and inserting the brew group ____________________________________________________________ 12 Cleaning and maintenance __________________________________________________________________________ 13 Descaling procedure _________________________________________________________________________________ 16 Error codes ___________________________________________________________________________________________ 17 Ordering accessories _________________________________________________________________________________ 17 Software updates ____________________________________________________________________________________ 18 Troubleshooting ______________________________________________________________________________________ 18 Technical specifications______________________________________________________________________________ 23 Declaration of Conformity____________________________________________________________________________ 24 Wi-Fi __________________________________________________________________________________________________ 24

Machine overview (Fig. A)

A1 Lid of bean hopper A2 Lid of pre-ground coffee compartment A3 Cup tray A4 Control panel A5 Socket for cord A6 Main switch A7 Drip tray A8 Drip tray release grip A9 HygieSteam container A10 HygieSteam cover with milk tube holder A11 Height-adjustable coffee and milk

dispensing spout A12 Internal cappuccinatore A13 Power cord with plug

A14 Grind setting knob (to learn more, visit www.saeco.com/care)

A15 Bean hopper A16 Service door A17 Coffee funnel A18 Coffee residues drawer A19 Brew group (to learn more, visit

www.saeco.com/care) A20 Coffee grounds container A21 Water tank A22 'Drip tray full' indicator A23 Drip tray cover

Accessories

A24 Milk container A25 Milk tube A26 Cleaning brush A27 Grease tube

A28 AquaClean filter A29 Measuring spoon A30 Water hardness test strip

English

Control panel

There are two versions of this espresso machine. Their control panels look different, but all icons work the same way. Refer to figures B and C for an overview of all icons. Below you can find the descriptions.

B1 Off icon C1 On/off icon B2/C2 Drinks B3/C3 Drinks menu B4/C4 Personal profiles

B5/C5 Beans B6/C6 Machine settings B7/C7 Status menu B8/C8 Shop B9/C9 Start/stop icon

Introduction

Congratulations on your purchase of a Saeco full-automatic coffee machine! To fully benefit from the online support that Saeco offers, you can use the control panel to register your machine via the builtin Wi-Fi connection, or go to www.saeco.com/MyCoffeeMachine and register your product there.

Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference.

Your Saeco full-automatic coffee machine allows you to connect with your Wi-Fi network to enhance your coffee experience.

By connecting your machine to your Wi-Fi network, you will be able to:

receive personalized recommendations based on machine learning

enjoy regular software updates to enhance your user experience

make use of the shop functionality, if available in your country

you can link your machine to your Amazon account for accessory replenishment, if this option is available in your country

connect to your Alexa home device to make use of voice control, if available in your country

Note: This machine has been tested with coffee. Although it has been carefully cleaned, there may be some coffee residues left. We guarantee, however, that the machine is absolutely new.

Switching on the machine when you have a Xelsis SUPREMA (SM8885, SM8889 only)

Switch on the machine by pressing the main switch on the back of the machine. Touch the center of the control panel to make the 'on' icon appear on the screen. Tap the 'on' icon and follow the step-bystep instructions on the control panel.

Please connect and update the machine at first installation and regularly check for manual

updates.

English

Switching on the machine when you have a Xelsis DELUXE (SM8780, SM8782, SM8785 only)

Switch on the machine by pressing the main switch on the back of the machine. Tap the 'on' icon and follow the step-by-step instructions on the control panel.

Please connect and update the machine at first installation and regularly check for manual

updates.

Connecting to Wi-Fi

Connect your coffee machine to a 2.4 GHz 802.11 b/g/n home Wi-Fi network. Connecting your coffee machine to your home Wi-Fi network, provides you with an enhanced user

experience.

Make sure that the coffee machine and the Wi-Fi router are within range of each other.

Follow the steps below to connect your coffee machine to your Wi-Fi network.

1 Tap the Settings icon and swipe from left to right to find the Wi-Fi icon. 2 Tap the Wi-Fi icon. 3 Follow the steps on the screen to connect your machine to your Wi-Fi network.

You are now ready to start your connected experience.

The machine will perform the automatic rinsing cycle when it is switched on and off via voice control and when the machine has been inactive for a while and switches off. Please make sure that the environment of the machine is safe.

Special functions

Special function Purpose

With BeanMaestro you are able to select the type and roast of your beans. It then optimizes the brewing settings automatically, to get the best out of your coffee beans.

HygieSteam function automatically cleans the milk system, removing microorganisms: use it after brewing cappuccino or other milk-based drinks.

Our durable grinder is made from 100% ceramic to be exceptionally hard and precise. It can be adjusted to your taste with 12-step levels.

The Maintenance Dashboard gives you a helpful overview and notifies you with status information on things like your water level or tell you that the AquaClean is running low.

Brewing drinks

General steps

To brew a drink, you need to follow a few simple steps.

English

1 Fill the water tank with tap water and fill the bean hopper with beans. 2 Place one or two cups under the height-adjustable dispensing spout. Slide the dispensing spout

up or down to adjust the height to the size of the cup or glass you are using.

3 Tap the Drinks icon to enter the 'Drinks' menu. Swipe from left to right to select your drink by

tapping on it.

Tap the '2x' icon if you want to brew two cups. The machine automatically carries out two grinding cycles in sequence of the selected drinks.

The '2x' icon is not available for all drinks.

4 After selecting a drink, you can adjust the settings to your preference by swiping the adjustable

bars up and down.

5 Press the start/stop icon to start brewing the selected drink.

Do not use caramelized or flavored coffee beans.

Turn the grind setting knob in small steps and after brewing 5 cups of coffee you start to taste the difference.

Support on drink parameters

To get additional information about a specific drink parameter, press and hold an adjustable bar for 3 seconds.

English

Brewing milk-based drinks

To brew milk-based drinks, you need to follow a few simple steps.

1 Fill the water tank with tap water and fill the bean hopper with beans.

Tip: When the flexible milk tube is connected to the cappuccinatore, slide the dispensing spout to the uppermost position for easy access to the water tank.

2 Unscrew the lid of the milk container and fill the milk container with milk.

Always use milk coming directly from the fridge for optimal results.

3 Connect the flexible milk tube to the cappuccinatore. 4 Place the metal milk tube in the container. 5 Tap the Drinks icon, scroll and select the milk-based drink icon of your choice. 6 You can adjust the settings to your preference by swiping the adjustable bars up and down. 7 Press the start/stop icon at any time to start brewing the selected drink.

For specific drinks, the machine first dispenses milk and then coffee. For a number of other drinks this is the other way around, the machine will first dispense coffee and then milk.

To stop dispensing milk before the machine has dispensed the preset amount, press the start/stop icon (SM8780, SM8782, SM8785 only) or press the stop icon (SM8885, SM8889 only).

To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and hold the start/stop icon (SM8780, SM8782, SM8785 only) or press the stop icon (SM8885, SM8889 only).

Directly after dispensing the milk, the 'HygieSteam Shot' is performed. The machine shoots steam through the internal milk system to rinse it quickly.The metal part of the milk tube may become hot. To avoid the risk of burns, let it cool down first.

Tip: You can also use a regular milk carton to brew your milk-based drinks. Place the metal milk tube directly into the milk carton.

English

Brewing coffee with pre-ground coffee

To brew coffee with pre-ground coffee, you need to follow a few simple steps.

1 Open the lid of the pre-ground coffee compartment and pour one measuring spoon of pre-ground

coffee into it. Then close the lid.

2 Tap the Drinks icon, scroll from left to right and select your drink. 3 Tap the pre-ground coffee icon. 4 You can adjust the settings to your preference by swiping the adjustable bars up and down. 5 Press the start/stop icon to start brewing the selected drink.

If you select pre-ground coffee, you cannot adjust the coffee strength or brew more than one drink at the same time.

Dispensing hot water

1 Make sure that the internal cappuccinatore is correctly attached to the machine (Fig. 1). 2 Place a cup under the spout. 3 Tap 'Hot Water' (Fig. 2). 4 Slide the adjustable bars up and down to adjust the hot water quantity or temperature to your

preference (Fig. 3).

5 Press the start/stop icon. 6 To stop dispensing hot water before the machine is finished, press the start/stop icon again

(SM8780, SM8782, SM8785 only) or press the stop icon again (SM8885, SM8889 only).

Personalization

The machine allows you to adjust the settings of a drink to your own preference and to store the adjusted drink in a personal profile. You can choose your own icon and your own profile name.

Get the best out of your beans with the BeanMaestro function

With BeanMaestro you are able to select the type and roast of your beans. It then optimizes the brewing settings automatically, to get the best out of your coffee beans.

1 Tap on the Beans icon in the main menu (Fig. 4). 2 Tap the BeanMaestro function (Fig. 5). 3 Select the type of beans. You can choose between Arabica and Robusta blend. 4 Select the roasting level of your beans. 5 The brewing settings are optimized automatically. 6 Enjoy your next coffee.

English

Speed up with CoffeeMaestro

Your machine offers the possibility to select taste profiles instead of adjusting all settings separately with the CoffeeMaestro function. You can choose between Delicato, Intenso and Forte. To select a CoffeeMaestro taste profile:

1 Tap the drink icon of your choice (Fig. 6). 2 Tap the CoffeeMaestro icon repeatedly (Fig. 7).

The main settings of the drink are now adjusted accordingly.

3 Press the start/stop icon to start brewing the drink.

Personalize your drink with the CoffeeEqualizer Touch+ function

After selecting a drink, the CoffeeEqualizer Touch+ function is activated automatically, allowing you to adjust the drink settings. Long press on each of the items on the display to activate the help function and receive further information.

With the CoffeeEqualizer Touch+ function you can adjust the following settings:

1 Aroma strength 2 Coffee quantity 3 Milk quantity 4 Water quantity 5 Drink temperature

Note: It depends on the drink you choose which settings you can adjust.

6 Foam amount 7 Coffee flavor 8 You can also decide to prepare 1 or 2 cups 9 The order of first dispensing coffee or milk

Save your favorite drinks in a profile

The machine allows you to adjust the settings of a drink to your own preference and to store the adjusted drink in a personal profile. You can select a profile and store a recipe using the profiles.

You can create a profile and add a drink using the profile icon.

1 Tap the profile icon on the main menu (Fig. 8). 2 Tap the Plus icon (Fig. 9). 3 Type your name and select your favorite icon. 4 You are ready to add a drink. Tap the drink icon of your choice. 5 Personalize the drink via the CoffeeEqualizer Touch+ or the CoffeeMaestro function. 6 Tap on the 'Safe to profile' icon to store it in your personal profile (Fig. 10).

Extra shot (ExtraShot)

Your machine offers you the possibility to add an extra shot of Ristretto to your coffee and milk drinks, for example if you want to have a stronger coffee.

1 Place a cup under the spout. 2 Tap one of the one-touch drinks icons to select a drink (Fig. 6). 3 Slide the adjustable bar up to set the strength to the top level and select the ExtraShot function

(Fig. 11).

4 Then press the start/stop icon (SM8780, SM8782, SM8785 only) or press the start icon (SM8885,

SM8889 only) to start brewing the drink.

5 To stop dispensing the drink before the machine has finished, press the start/stop icon again

(SM8780, SM8782, SM8785 only) or press the stop icon again (SM8885, SM8889 only).

When you have selected the ExtraShot function, you can only brew one coffee at a time.

The extra shot function is not available for all drinks.

English

Adjusting machine settings

You can adjust most machine settings by tapping the Settings icon and follow the steps on the screen.

For online support (frequently asked questions, movies etc.), scan the QR code on the cover of this booklet or visit www.saeco.com/care

Setting the water hardness

We advise you to adjust the water hardness setting to the water hardness level in your region for optimal performance and a longer lifetime of the machine. This also prevents you from having to descale the machine too often. The default water hardness setting is 4: hard water.

Use the water hardness test strip supplied in the box to determine the water hardness in your region:

1 Immerse the water hardness test strip in tap water or hold it under the tap for 1 second (Fig. 12). 2 Wait 1 minute. The number of squares on the test strip that turn red indicate the water hardness

(Fig. 13).

Set the machine to the correct water hardness:

1 Tap the Settings icon and scroll from left to right to select 'Water hardness'. 2 Select the water hardness level. The number of red squares selected on the display should be the

same as the number of red squares on the test strip (Fig. 14).

3 When you have set the correct water hardness, tap the confirmation icon to confirm.

Adjusting the grind setting

You can change the coffee strength with the grind setting knob inside the bean container. The lower the grind setting, the finer the coffee beans are ground and the stronger the coffee becomes. There are 12 different grind settings you can choose from.

The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you not to adjust the grind setting until you have brewed 100-150 cups (approx. 1 month of use).

You need to brew 2 to 3 drinks before you can taste the full difference.

Do not turn the grind setting knob more than one notch at a time to prevent damage to the grinder.

1 Tap the Beans icon in the main menu. 2 Tap on ¨Grinder¨. 3 Watch the how to video.

Restoring factory settings

The machine offers you the possibility to restore the factory settings at any moment.

1 Tap the Settings icon. 2 Scroll from left to right to select 'Factory settings'. Confirm by tapping the confirmation icon.

The settings are now restored.

The following factory settings are restored to default: water hardness, standby time, display brightness, sound, front illumination, profiles, tank light, measure/units, home screen settings,

BeanMaestro preferences, Wi-Fi credentials, software update preferences, Saeco credentials, Amazon credentials.

English

AquaClean water filter

Your machine is AquaClean enabled. You can place the AquaClean water filter in the water tank to preserve the taste of your coffee. It also diminishes the need for descaling by reducing limescale build-up in your machine. You can purchase an AquaClean water filter from your local or online retailer or from authorized service centers.

AquaClean filter status indication

The status of the AquaClean filter is always visible in the 'Status' menu as a percentage.

If the status of the AquaClean filter is 10% or less, the screen shows a message for 2 seconds each time you switch on the machine. This message advises you to buy a new filter.

If the status of the filter is 0%, the machine asks you to replace the AquaClean filter every time you switch on the machine.

Activating the AquaClean water filter (5 min.)

The machine does not automatically detect that a filter has been placed in the water tank. Therefore you need to activate each new AquaClean water filter that you install in the 'Status' menu.

When the machine stops showing the filter activation message, you can still activate an AquaClean water filter, but you will need to descale the machine first.

Your machine has to be completely limescale-free before you start using the AquaClean water filter.

Before activating the AquaClean water filter, it has to be prepared by soaking it in water as described below. If you don't do this, air might be drawn into the machine instead of water, which makes a lot of noise and prevents the machine from being able to brew coffee.

1 Tap the 'Status' icon and scroll from left to right to select 'AquaClean'. 2 Tap the confirmation icon again when the activation screen appears. Follow the instructions on

the screen.

Replacing the AquaClean water filter (5 min.)

After 95 liters of water have flowed through the filter, the filter will cease to work. The AquaClean status indicator drops to 0% to remind you to replace the filter. If you do not replace the AquaClean water filter in time, you can still replace the filter but you first need to descale the machine.

When the AquaClean status indicator drops to 0% or when the machine reminds you to replace the AquaClean filter:

1 take out the old AquaClean water filter. 2 install a new filter and activate it as described in chapter 'Activating the AquaClean water filter (5

min.)'.

Replace the AquaClean water filter at least every 3 months, even if the machine does not yet indicate that replacement is required.

Removing and inserting the brew group

Go to the 'Status' menu on the screen and select 'Brew group clean' or visit www.saeco.com/care for detailed video instructions on how to remove, insert and clean the brew group.

Removing the brew group from the machine

1 Open the service door (Fig. 15).

English

2 Remove the coffee residues drawer (Fig. 16). 3 Press the PUSH button (Fig. 17) and pull at the grip of the brew group to remove it from the

machine (Fig. 18).

Reinserting the brew group

Before you slide the brew group back into the machine, make sure it is in the correct position. 1 Check if the arrow on the yellow cylinder on the side of the brew group is aligned with the black

arrow and N (Fig. 19).

If they are not aligned, push down the lever until it is in contact with the base of the brew group (Fig. 20).

2 Make sure that the yellow locking hook on the other side of the brew group is in the correct

position.

To position the hook correctly, push it upwards until it is in uppermost position (Fig. 21).

3 Slide the brew group back into the machine along the guiding rails on the sides (Fig. 22) until it

locks into position with a click (Fig. 23). Do not press the PUSH button.

4 Place back the coffee residues drawer and close the service door.

Cleaning and maintenance

Your machine will advise you when to perform cleaning and maintenance. Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting

coffee for a long time with a steady coffee flow. Consult the table below for a detailed description of when and how to clean all detachable parts of

the machine. You can find more detailed information and video instructions on www.saeco.com/care. See figure C for an overview of which parts can be cleaned in the dishwasher.

Item When to clean How to find in the control panel/

What to do

AquaClean filter When the machine asks you or

every three months.

The machine does not automatically detect that a filter has been placed in the water tank.

Therefore you need to activate each new AquaClean filter that you install in the 'Status' menu.

Your machine has to be completely limescale-free before you start using the AquaClean filter. Replace the AquaClean filter at least every 3 months, even if the machine does not yet indicate

that replacement is required.

Brew group Weekly STATUS -> PERFORMANCE ->BREW

Before you slide the brew group back into the machine, make sure it is in the correct position. The arrow on the yellow cylinder on the side of the brew group has to be aligned with the black arrow and N (Fig. 19).

Monthly STATUS -> PERFORMANCE ->COFFEE OIL

STATUS->CLEANING->AQUACLEAN. Follow the steps to activate the AquaClean filter.

GROUP CLEAN. Follow the steps to remove and clean the brew group.

REMOVAL. Follow the steps of the selfcleaning process to automatically remove coffee oil residues from the brew group.

English

Item When to clean How to find in the control panel/

What to do

Milk system/internal cappuccinatore

Milk container Weekly Disassemble the milk container (Fig. 24) and

HygieSteam container (milk tube holder)

Pre-ground coffee compartment

After every day of use STATUS -> HYGIESTEAM. Follow the steps

Weekly Remove and disassemble the internal

Monthly STATUS -> HYGIESTEAM -> DEEP MILK

Weekly or when the machine reminds you

Check the pre-ground coffee compartment weekly to see if it is clogged

of the self-cleaning process to clean the milk system. Wipe the outside of the metal milk tube with a damp cloth before placing it into the milk tube holder.

cappuccinatore. Rinse all parts under the tap with some washing-up liquid.

CLEAN. Follow the steps of the self-cleaning process to clean the milk system.

push out the ball using the pin of the milk tube (Fig. 25). Clean all parts of the milk container under the tap or in the dishwasher.

Remove the HygieSteam container from the machine (Fig. 26) and remove the HygieSteam cover (Fig. 27). Clean the HygieSteam container and cover under the tap.

Unplug the machine and remove the brew group. Open the lid of the pre-ground coffee compartment and insert the spoon handle into it. Move the handle up and down until the clogged ground coffee falls down (Fig.

28). Go to www.saeco.com/care for detailed video instructions.

Coffee grounds container

Drip tray Empty the drip tray daily or as

Lubrication of the brew group

Water tank Weekly Rinse the water tank under the tap.

Machine front Weekly Clean with a non-abrasive cloth.

Empty the coffee grounds container when prompted by the machine. Clean it weekly

soon as the red 'drip tray full' indicator pops up through the drip tray (Fig. 29). Clean the drip tray weekly

Every 2 months Lubricate the brew group with the by-

Remove the coffee grounds container while the machine is switched on. Rinse it under the tap with some washing-up liquid.

Remove the drip tray (Fig. 30) and rinse it under the tap with some washing-up liquid.

packed grease (see 'Lubricating the brew group'). Go to www.saeco.com/care for detailed video instructions.

English

Item When to clean How to find in the control panel/

What to do

Descaling of the machine

When the machine asks you to descale

STATUS -> DESCALING. Follow the steps to descale the machine. When descaling is needed, the machine asks you to descale it, press the OK icon to start and follow the steps.

Cleaning the brew group

Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Go to the 'Status' menu on the screen and select 'Brew group clean' or visit www.saeco.com/care for support videos on how to remove, insert and clean the brew group.

Cleaning the brew group under the tap

1 Tap the 'Status' icon and scroll to select 'Brew group clean'. 2 Tap the confirmation icon to confirm and then follow the instructions on the screen.

Cleaning the brew group with the coffee oil remover tablets

Only use Philips coffee oil remover tablets.

1 Tap the 'Status' icon and scroll to select 'Brew group clean'. 2 Tap the confirmation icon to confirm and then follow the instructions on the screen.

Lubricating the brew group

To improve your machine's performance, we suggest that you lubricate the brew group every 2 months, to ensure that the moving parts continue to move smoothly.

1 Apply a thin layer of grease on the piston (grey part) of the brew group (Fig. 31). 2 Apply a thin layer of grease around the shaft (grey part) in the bottom of the brew group (Fig. 32). 3 Apply a thin layer of grease to the guiding rails on both sides (Fig. 33).

Cleaning programs for the internal cappuccinatore

The machines tells you when to clean the internal cappuccinatore.

The machine has three programs to clean the internal cappuccinatore:

'HygieSteam Shot': during the preparation of a milk-based drink, the machine automatically shoots

steam through the internal cappuccinatore to rinse it quickly.

'HygieSteam': the machine thoroughly cleans the internal milk system with steam. Make sure that

the HygieSteam container is correctly assembled (Fig. 34) and attached to the machine (Fig. 35).

Place the milk tube in the milk tube holder (Fig. 36) and follow the instructions on the screen.

'Deep Milk Clean': Perform the 'Deep Milk Clean' procedure with the Philips milk circuit cleaner for a

thorough cleaning of the internal milk system.

Cleaning the internal cappuccinatore under the tap

1 Open the door of the internal cappuccinatore (Fig. 37). 2 Remove the internal cappuccinatore by pulling it down (Fig. 38). 3 Disassemble the internal cappuccinatore by pulling the bottom part off the top part (Fig. 39). 4 Disassemble all parts (Fig. 40) and clean them under the tap.

English

5 Reassemble the internal cappuccinatore. 6 To place back the internal cappuccinatore, put it in upright position and make sure the holes are

aligned with the two tubes on the machine. Then move the internal cappuccinatore upwards until it

locks into place (Fig. 1).

7 Close the door. Visit www.saeco.com/care for detailed video instructions.

Descaling procedure

Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and will not dissolve the limescale properly. Not using the Philips descaler will void your warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaler from your local or online retailer or from authorized service centers.

1 When the machine asks you to descale it, tap the confirmation icon to start. To start descaling

without being prompted by the machine, tap the 'Status' icon and select 'Descale'.

2 Remove the drip tray, the coffee grounds container and the HygieSteam container (Fig. 26), empty

them and put them back into place.

3 Remove the water tank and empty it. Then remove the AquaClean filter. 4 Pour the whole bottle of Philips descaler into the water tank and then fill it with water up to the

CALC CLEAN level (Fig. 41). Then place the water tank back into the machine.

5 Place a large container (1.5 l) under the coffee dispensing spout. 6 Make sure that the HygieSteam container is correctly assembled (Fig. 34) and attached to the

machine (Fig. 35). Place the milk tube in the milk tube holder.

7 Follow the instructions on the screen to start the descaling procedure. The descaling procedure

lasts approx. 30 minutes and consists of a descaling cycle and a rinsing cycle.

8 Once the descaling cycle is finished, you need to rinse the water tank and water circuit. Follow the

instructions on the screen.

9 Place a new AquaClean filter in the water tank and activate it (see 'Activating the AquaClean water

filter (5 min.)').

Tip: Using the AquaClean filter reduces the need for descaling!

What to do if the descaling procedure is interrupted

You can exit the descaling procedure by pressing the on/off icon on the control panel. If the descaling procedure is interrupted before it is completely finished, some descaling liquid may remain in the water tank or the water circuit. In that case, do the following:

1 Empty and rinse the water tank thoroughly. 2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine

back on. The machine will heat up and perform an automatic rinsing cycle.

3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual rinsing cycle, first

dispense half a water tank of hot water and then brew 2 cups of pre-ground coffee without adding

ground coffee.

Note: If the descaling procedure was not completed, the machine will require another descaling procedure as soon as possible.

English

Error codes

Below you find a list of the error codes showing problems that you can solve yourself. Video instructions are available on www.saeco.com/care. If another error code appears, please contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.

Error code

Problem Possible solution

01 The coffee funnel is

clogged.

03 The brew group is dirty

or not well-greased.

04 The brew group is not

positioned correctly.

05 There is air in the water

circuit.

The AquaClean filter was not prepared properly before installation or it is clogged.

11 The machine needs to

adjust to room temperature

Switch off the machine and unplug it. Remove the brew group. Then open the lid of the pre-ground coffee compartment and insert the spoon handle. Move the handle up and down until the clogged ground coffee falls down (Fig. 28). Visit www.saeco.com/care for detailed video instructions.

Switch off the machine. Rinse the brew group with fresh water, let it air-dry and then lubricate it (see 'Lubricating the brew group'). Consult chapter 'Cleaning the brew group' or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again.

Switch off the machine. Remove the brew group and reinsert it. Make sure that the brew group is in the correct position before you insert it. Consult chapter 'Handling the brew group' or visit www.saeco.com/care for detailed video instructions. Then switch the machine on again.

Restart the machine by switching it off and on again. If this works, dispense 2-3 cups of hot water. Descale the machine if you have not done so for a longer period of time.

Remove the AquaClean filter and try to brew a coffee again. If this works, make sure that the AquaClean filter is prepared properly before you place it back (see 'Activating the AquaClean water filter (5 min.)'). Put the AquaClean filter back into the water tank. If this still does not work, the filter might be clogged and needs to be replaced.

Allow some time for the machine to adjust from transport/outdoor temperature to room temperature. Switch off the machine for 30 minutes and switch it on again. If this does not work, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.

14 The machine is

overheated.

19 The machine is not

connected to the wall socket properly.

Switch off the machine and switch it back on after 30 minutes.

Make sure that the small plug of the power cord is properly connected to the socket on the back of the machine.

Ordering accessories

To clean and descale the machine, only use Philips maintenance products. These products can be purchased by enabling Amazon Smart Reorders, from your local or online retailer or from authorized service centers.

English

To be able to use Amazon Smart Reorders, you first need to activate this service on Amazon. Then follow the steps on the screen of your machine to connect your Amazon account to your Saeco account. After you have completed these steps, you can use the Amazon Smart Reorder service.

In the 'Shop' menu on the control panel of the machine you can view the availability of Philips maintenance products and accessories at local retailers.

To find a full list of spare parts online, enter the type number of your machine. You can find the type number on the inside of the service door.

Maintenance products and type numbers:

Descaling solution CA6700

AquaClean filter CA6903

Brew group grease HD5061

Coffee oil remover tablets CA6704

Milk circuit cleaner CA6705

Maintenance kit CA6707

Software updates

Updating is essential to safeguard your privacy and proper functioning of your coffee machine. You can set whether you want to update your machine manually or whether you want it to be done automatically.

When you have selected automatic updates, make sure that the machine is also plugged in at night and Wi-Fi is enabled, so that the machine can receive the software updates overnight.

Updates are made available when there are software improvements, new features for the machine and to prevent a possible security issue.

Mandatory firmware updates are started automatically when the coffee machine is in stand-by mode. During a firmware update the coffee machine cannot be used.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the machine. Support videos and a complete list of frequently asked questions are available on www.saeco.com/care. If you are unable to solve the problem, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.

Problem Cause Solution

There are some coffee residues inside my new coffee machine.

The machine is in DEMO mode.

The drip tray fills up quickly / there is always some water in the drip tray.

This machine has been tested with coffee.

You pressed the standby icon for more than 8 seconds.

This is normal. The machine uses water to rinse the internal circuit and brew group. Some water flows through the internal system directly into the drip tray.

Although it has been carefully cleaned, there may be some coffee residues left. However, the machine is absolutely new.

Switch the machine off and then on again with the main switch on the back of the machine.

Empty the drip tray daily or as soon as the red 'drip tray full' indicator pops up through the drip tray cover (Fig. 29). Tip: place a cup under the dispensing spout to collect rinsing water that comes out of it.

Problem Cause Solution

English

The 'empty coffee grounds container' icon remains on.

The machine prompts to empty the coffee grounds container even though the container is not full.

The coffee grounds container is too full and the 'empty coffee grounds container' icon did not appear on the display.

I cannot remove the brew group.

I cannot insert the brew group.

You emptied the coffee grounds container while the machine was unplugged from the wall socket, or you placed it back too fast.

The machine did not reset the counter the last time you emptied the coffee grounds container.

You removed the drip tray without emptying the coffee grounds container.

The brew group is not in the correct position.

Remove the coffee grounds container, wait at least 5 seconds and then insert it again.

Always wait approx. 5 seconds when you place back the coffee grounds container. In this way, the coffee pucks counter will be reset to zero and the number of coffee pucks is counted correctly.

When you remove the drip tray, also empty the coffee grounds container even if it contains only a few coffee pucks. This ensures that the coffee pucks counter is reset to zero and that the number of coffee pucks is counted correctly.

Reset the machine in the following way: close the service door. Switch the machine off and back on again and wait until the machine is ready for use. Try to remove the brew group again. See chapter 'Removing and inserting the brew group' for step-by-step instructions.

Reset the machine in the following way: close the service door. Leave the brew group out. Switch off the machine and unplug it. Wait for 30 seconds and then plug the machine back in, switch it on and wait until the machine is ready for use. Then put the brew group in the correct position and reinsert it into the machine. See chapter 'Removing and inserting the brew group' for step- bystep instructions.

The coffee is watery. The brew group is dirty or needs

to be lubricated.

The machine is performing its self-adjustment procedure. This procedure is started automatically when you use the machine for the first time, when you change to another type of coffee beans or after a long period of non-use.

Remove the brew group, rinse it under the tap and leave it to dry. Then lubricate the moving parts (see 'Lubricating the brew group').

Brew 5 cups of coffee initially to allow the machine to complete its selfadjustment procedure.

English

Problem Cause Solution

The grinder is set to a too coarse setting.

The coffee is not hot enough.

 Adding milk reduces the

Coffee does not come out or coffee comes out slowly.

The temperature is set too low. Set the temperature to the maximum

A cold cup reduces the temperature of the drink.

temperature of the drink.

The AquaClean water filter was not prepared properly for installation.

The AquaClean water filter is clogged.

The grinder is set to a too fine setting.

Set the grinder to a finer (lower) setting. Brew 2 to 3 drinks to be able to taste the full difference.

setting (Fig. 42).

Preheat the cups by rinsing them with hot water.

Regardless of whether you add hot or cold milk, adding milk always reduces the temperature of the coffee. Preheat the cups by rinsing them with hot water.

Remove the AquaClean filter and dispense some hot water. If this works, the AquaClean filter was not installed properly. Reinstall and activate the AquaClean filter and follow all steps in chapter 'AquaClean water filter'.

After a long period of non-use, you need to prepare the AquaClean water filter for use again and dispense 2-3 cups of hot water.

Replace the AquaClean water filter every 3 months. A filter that is older than 3 months can become clogged.

Set the grinder to a coarser (higher) setting. Note that this will impact the coffee taste.

 The brew group is dirty. Remove the brew group and rinse it

 The coffee dispensing spout is

dirty.

The pre-ground coffee compartment is clogged

The machine circuit is blocked by limescale.

under the tap (see 'Cleaning the brew group under the tap').

Clean the coffee dispensing spout and its holes with a pipe cleaner or needle.

Switch off the machine and remove the brew group. Open the lid of the preground coffee compartment and insert the spoon handle into it. Move the handle up and down until the clogged ground coffee falls down (Fig. 28).

Descale the machine with Philips descaler (see 'Descaling procedure'). Always descale when the machine prompts you.

Problem Cause Solution

English

The milk does not froth. The internal cappuccinatore is

dirty or not inserted correctly.

The type of milk used is not suitable for frothing.

The milk is splashing. The milk you use is not cold

enough.

' The flexible milk tube is not

connected properly.

The cappuccinatore and milk tubes are not clean.

Clean the internal cappuccinatore and make sure that you position and insert it correctly (see 'Cleaning the internal cappuccinatore under the tap').

Different types of milk result in different amounts of froth and different froth qualities.

Make sure you use cold milk coming directly from the fridge.

Open the door of the coffee dispensing spout (Fig. 37) and check if the flexible milk tube is fully connected to the cappuccinatore (Fig. 43). Note that the cappuccinatore and milk tubes may be hot. Let the cappuccinatore and the tubes cool down before you touch them.

Remove and disassemble the internal cappuccinatore (see 'Cleaning the internal cappuccinatore under the tap'). Rinse all parts under the tap. For thorough cleaning, use Philips milk circuit cleaner and perform the Deep Milk Clean procedure via the 'Status' and 'Hygiesteam' menu. Note that if the parts have been cleaned in the dishwasher, they may have become clogged by food particles or detergent residues. A visual check that they are not obstructed is also recommended.

The machine seems to be leaking.

We advise you to perform the HygieSteam program every day: 1) Press 'Status' on the control panel. 2) Select 'HygieSteam'. 3) Then confirm all steps on the display.

The milk tubes are clogged. Always store the milk container without

The machine uses water to rinse the internal circuit and brew group. This water flows through the internal system directly into the drip tray. This is normal.

the milk tubes in the refrigerator. Leftover milk could accumulate inside the milk tubes and block the flow of milk through the tubes. Rinse the milk tubes before storage.

Empty the drip tray every day or as soon as the 'drip tray full' indicator pops up through the drip tray cover (Fig. 29). Tip: Place a cup under the dispensing spout to collect rinsing water and reduce the amount of water in the drip tray.

English

Problem Cause Solution

I cannot activate the AquaClean water filter and the machine asks for descaling.

The new water filter does not fit.

The machine is making a loud noise.

The drip tray is too full and has overflowed which makes it look like the machine is leaking.

The water tank is not fully inserted, some water is leaking out of the water tank and air is drawn into the machine.

The brew group is dirty/clogged. Rinse the brew group.

The machine is not placed on a horizontal surface.

The filter has not been installed or replaced in time after the screen showed the AquaClean reminder. This means your machine is not completely free of limescale anymore.

You are trying to install another filter than the AquaClean water filter.

The rubber ring on the AquaClean water filter is not in place.

It is normal that your machine makes some noise during use.

Empty the drip tray every day or as soon as the 'drip tray full' indicator pops up through the drip tray cover (Fig. 29).

Make sure the water tank is in the correct position: remove it and reinsert it into the machine as far as possible.

Place the machine on a horizontal surface so that the drip tray does not overflow and the 'drip tray full' indicator works properly.

Descale your machine first and then install the AquaClean water filter.

Only the AquaClean water filter fits into the machine.

Place back the rubber ring on the AquaClean water filter.

If the machine starts to make a different kind of noise, clean the brew group and lubricate it (see 'Lubricating the brew group').

When I try to connect the machine to Wi-Fi for the first time, the machine cannot connect to the Wi-Fi network.

The AquaClean water filter was not prepared properly and air is now drawn into the machine.

The water tank is not fully inserted and air is drawn into the machine.

Your Wi-Fi name and password are not correct.

The coffee machine and the WiFi router are not within range of each other.

Remove the AquaClean water filter from the water tank and prepare it for use properly before you place it back. See chapter 'AquaClean water filter' for step-by-step instructions.

Make sure the water tank is in the correct position: remove it and reinsert it by pushing it into the machine as far as possible.

Check your Wi-Fi name and password.

Ensure that the coffee machine and the Wi-Fi router are within range of each other.or use a Wi-Fi repeater.

Problem Cause Solution

English

The machine is not able to find the home Wi-Fi network.

I cannot use Alexa and Amazon Smart Reorders yet.

The Wi-Fi connectivity of the machine used to work but is not working anymore.

The Wi-Fi router is not working properly.

The machine is not within range of the router.

The router your coffee machine is trying to connect to is 5GHz dual-band and your coffee machine is not trying to connect to a 2.4GHz network.

You have not yet connected to your Amazon to your Saeco account.

Your Wi-Fi name and/or password has changed.

The Wi-Fi password has changed.

Please make sure that the Wi-Fi router is working properly and is connected to the internet.

Make sure the machine is within range of the router. You can also use a Wi-Fi signal repeater.

5GHz networks are not supported.Temporarily switch off the 5GHz band in your router and try to pair your coffee machine again to another band of the same router (2.4GHz). Switch on your 5GHz band again after successful pairing

Please follow the instructions on the control panel of the machine to connect your Amazon account to your Saeco account to be able to use Alexa voice control and Amazon Smart Reorders.

Note: To be able to use these features you need to have an Alexa app or an Alexa device and you need to enable the Smart Reorders service on Amazon.

Follow the instructions of section 'Connecting to Wi-Fi' and choose the network with the new Wi-Fi name to connect to.

Follow the instructions of section 'Connecting to Wi-Fi' and enter the new Wi-Fi password.

Your Wi-Fi router is not working properly.

The Wi-Fi connectivity can be interrupted by electromagnetic or other interferences.

None of the solutions mentioned above work.

Check the router and make sure it is working.

Keep the appliance away from other electronic devices that may cause interferences.

Switch the machine off and then on again with the main switch on the back to recheck the Wi-Fi connection.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the preset quantities are approximate.

Description Value

Size (w x h x d) 287 x 396 x 487 mm

English

Weight 11 - 12.4 kg

Power cord length 1200 mm

Water tank 1.7 liters, removable

Bean hopper capacity 450 g

Coffee grounds container capacity 15 pucks

Milk container capacity 600 ml

Height-adjustable spout height 75-148 mm

Nominal voltage - Power rating - Power supply See data plate on the inside of service door

Wi-Fi frequency band 2.4 GHz 802.11 b/g/n

Declaration of Conformity

Hereby, DAP B.V. declares that the fully automatic espresso machines SM8780, SM8782, SM8785, SM8885 and SM8889 are in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://www.saeco.com.

The fully automatic espresso machines SM8780, SM8782, SM8785, SM8885 and SM8889 are equipped with a Wi-Fi module, 2.4GHz 802.11 b/g/n (channels 1..13). Maximum transmitting power <100mW(20dBm).

Wi-Fi

The machine is a networked equipment, in compliance with reg. (EU) No 801/2013, and it is intended to be used permanently connected to a 2.4 GHz 802.11 b/g/n network.

Čeština

Obsah

Přehled přístroje (obr.A) _____________________________________________________________________________ 25 Ovládací panel________________________________________________________________________________________ 26 Úvod __________________________________________________________________________________________________ 26 Speciální funkce ______________________________________________________________________________________ 27 Vaření nápojů_________________________________________________________________________________________ 28 Úprava nastavení přístroje ___________________________________________________________________________ 32 Vodní filtr AquaClean ________________________________________________________________________________ 33 Vyjmutí avložení varné sestavy______________________________________________________________________ 33 Čištění aúdržba ______________________________________________________________________________________ 34 Postup odstranění vodního kamene ________________________________________________________________ 37 Chybové kódy ________________________________________________________________________________________ 38 Objednávání příslušenství____________________________________________________________________________ 39 Aktualizace softwaru _________________________________________________________________________________ 39 Řešení problémů _____________________________________________________________________________________ 40 Technické specifikace ________________________________________________________________________________ 45 Prohlášení oshodě___________________________________________________________________________________ 46 Wi-Fi __________________________________________________________________________________________________ 46

Přehled přístroje (obr. A)

A1 Víko násypky na kávová zrna A2 Víko přihrádky na mletou kávu A3 Tácek našálky A4 Ovládací panel A5 Zásuvka pro kabel A6 Hlavní vypínač A7 Odkapávací tácek A8 Rukojeť uvolnění odkapávacího tácku A9 HygieSteam Nádoba A10 Kryt HygieSteam sdržákem trubičky na

mléko A11 Výškově nastavitelná hubice dávkování kávy

a mléka A12 Vnitřní napěňovač mléka A13 Napájecí kabel se zástrčkou

A14 Knoflík nastavení mletí (více informací najdete na stránce www.saeco.com/care)

A15 Násypka na kávová zrna A16 Obslužná dvířka A17 Nálevka na kávu A18 Zásuvka na zbytky kávy A19 Varná sestava (více informací najdete na

stránce www.saeco.com/care) A20 Nádoba na kávovou sedlinu A21 Nádržka na vodu A22 Indikátor „Plný odkapávací tácek“ A23 Kryt odkapávacího tácku

Příslušenství

A24 Nádržka na mléko A25 Trubička na mléko A26 Čisticí kartáček A27 Tuba splastickým mazivem

A28 Filtr AquaClean A29 Odměrka A30 Testovací proužek ke zjišťování tvrdosti

vody

Čeština

Ovládací panel

Tento espresovač existuje ve dvou verzích. Jejich ovládací panely vypadají odlišně, všechny ikony však fungují stejně. Přehled všech ikon naleznete na obrázcích B aC. Níže jsou uvedeny popisy.

B1 Ikona Vypnuto C1 Ikona Zapnuto/Vypnuto B2/C2 Nápoje B3/C3 Nabídka nápojů B4/C4 Osobní profily

B5/C5 Zrna B6/C6 Nastavení přístroje B7/C7 Stavová nabídka B8/C8 Obchod B9/C9 Ikona Spuštění/Zastavení

Úvod

Gratulujeme vám kzakoupení plně automatického kávovaru Saeco! Chcete-li plně využívat výhod online podpory nabízené společností Saeco, můžete pomocí ovládacího panelu provést registraci přístroje přes vestavěné Wi-Fi připojení, případně můžete navštívit web www.saeco.com/MyCoffeeMachine asvůj produkt zaregistrovat tam.

Před prvním použitím kávovaru si pečlivě přečtěte samostatnou brožuru sbezpečnostními informacemi a uschovejte ji pro budoucí použití.

Plně automatický kávovar Saeco nabízí prostřednictvím připojení kWi-Fi síti rozšířené možnosti. Přístroj připojený kWi-Fi síti nabízí uživateli tyto funkce:

příjem personalizovaných doporučení na základě strojového učení,

stahování pravidelných aktualizací softwaru pro vylepšení uživatelského prostředí,

možnost využití funkce obchodu, pokud je ve vaší zemi kdispozici,

propojení přístroje súčtem Amazon za účelem nákupu příslušenství, pokud je služba ve vaší zemi kdispozici,

připojení kdomácímu zařízení Alexa avyužití hlasového ovládání (pokud je ve vaší zemi kdispozici).

Poznámka: Tento přístroj byl zkoušen spoužitím kávy. Ikdyž byl pečlivě vyčištěn, mohly vněm zůstat zbytky kávy. Zaručujeme však, že přístroj je zcela nový.

Zapnutí přístroje, pokud máte Xelsis SUPREMA (pouze modely SM8885, SM8889)

Přístup zapněte stisknutím hlavního vypínače na zadní straně. Stisknutím středu ovládacího panelu zobrazíte na displeji ikonu „Zapnout“. Klepněte na ikonu „Zapnout“ apostupujte podle pokynů na ovládacím panelu.

Při první instalaci připojte aaktualizujte přístroj apravidelně kontrolujte manuální aktualizace.

Zapnutí přístroje, pokud máte Xelsis DELUXE (pouze modely SM8780, SM8782, SM8785)

Přístup zapněte stisknutím hlavního vypínače na zadní straně. Klepněte na ikonu „Zapnout“ apostupujte podle pokynů na ovládacím panelu.

Čeština

Při první instalaci připojte aaktualizujte přístroj apravidelně kontrolujte manuální aktualizace.

Připojení kWi-Fi síti

Připojte svůj kávovar kdomácí Wi-Fi síti 2,4 GHz 802.11 b/g/n.

Připojení vašeho kávovaru kdomácí Wi-Fi síti vám poskytne lepší uživatelský zážitek.

Ujistěte se, že kávovar a směrovač Wi-Fi jsou ve vzájemném dosahu. Pomocí níže uvedených kroků připojte kávovar kWi-Fi síti.

1 Klepnutím na ikonu Nastavení a přejetím zleva doprava najděte ikonu Wi-Fi. 2 Klepněte na ikonu Wi-Fi. 3 Podle pokynů na obrazovce připojte svůj přístroj kWi-Fi síti.

Nyní jste připraveni využívat všechny užitečné funkce.

Přístroj provede automatický cyklus proplachování při zapnutí avypnutí pomocí hlasového ovládání ataké vpřípadě, že byl déle nečinný avypnul se. Ujistěte se, že je prostředí přístroje bezpečné.

Speciální funkce

Speciální funkce Účel

SBeanMaestro si můžete zvolit druh apražení kávových zrn. Tato funkce poté automaticky optimalizuje nastavení přípravy kávy, díky čemuž zkávových zrn získáte ten nejlepší výsledek.

Funkce HygieSteam se automaticky postará očištění systému na mléko aodstraní mikroorganismy: tuto funkci používejte po přípravě cappuccina nebo jiných nápojů obsahujících mléko.

Čeština

Náš odolný mlýnek je vyroben ze 100% keramiky, aby byl výjimečně tvrdý a přesný. Díky 12 stupňovému nastavení si ho můžete přizpůsobit podle vlastní chuti.

Řídicí panel údržby vám poskytuje užitečný přehled o přístroji a upozorňuje vás na stav věcí, jako je hladina vody nebo končící životnost filtru AquaClean.

Vaření nápojů

Obecný postup

Chcete-li připravit nápoj, postupujte podle několika jednoduchých kroků.

1 Naplňte nádržku na vodu vodou zkohoutku anásypku na kávová zrna naplňte kávovými zrny. 2 Pod výškově nastavitelnou dávkovací hubici umístěte jeden nebo dva šálky. Výšku hubice lze podle

velikosti šálku nebo sklenice nastavit posunutím dávkovací hubice nahoru nebo dolů.

3 Přejděte do nabídky nápojů klepnutím na ikonu nápojů . Přejíždějte zleva doprava a klepnutím

vyberte požadovaný nápoj.

Pokud chcete připravit dva šálky, klepněte na ikonu „2×“. Přístroj automaticky provede dva cykly mletí vpořadí vybraných nápojů.

Ikona „2×“ není kdispozici pro všechny nápoje.

4 Po výběru nápoje můžete posouváním nastavitelných sloupků nahoru a dolů upravit nastavení

podle svých preferencí.

5 Přípravu vybraného nápoje poté spusťte stisknutím ikony spuštění/zastavení .

Nopoužívejte karamelizovaná nebo jinak ochucená kávová zrna.

Knoflíkem nastavení mletí otáčejte vmalých krocích. Rozdíl vchuti se projeví po uvaření 5šálků kávy.

Podpora týkající se parametrů nápojů

Chcete-li získat další informace okonkrétním parametru nápoje, stiskněte apodržte nastavitelný sloupek po dobu 3sekund.

+ 656 hidden pages

Philips SM8889/00 user manual [uk]

Specifications and Main Features

Frequently Asked Questions

User Manual