Philips Sil9993 Service Manual

Silicon Image introduces PanelLink CinemaTM, its new flagship consumer electronics product family featuring the first silicon fully compliant with the industry's broadly supported HDMI 1.0 specification. PanelLink Cinema products offer a simple, low-cost method of providing consumers with the highest-quality, all-digital home theater experience. Consumer electronics devices incorporating PanelLink Cinema technology are able to transmit and/or receive uncompressed, premiumquality, digital HD content over a single, low-cost HDMI cable. Built-in backward compatibility with the DVI 1.0 specification allows HDMI devices to connect to any DVI device, protecting consumer's home theater investments.

The PanelLink Cinema SiI 9993 receiver enables digital display devices such as DTVs, plasma displays, LCD TVs and projectors to receive and display secure digital audio and video transmitted from home source devices such as digital set-top boxes, DVD and D-VHS players, and A/V receivers. The SiI 9993 incorporates an extremely flexible audio and video interface. An integrated color space converter provides full backward compatibility with DVI devices. With both digital and analog video (RGB/YPbPr) output, the SiI 9993 easily fits into existing DTV architectures. A S/PDIF port outputs either 2-channel PCM audio or encoded data such as Dolby Digital and DTS. An I

S port outputs

PCM data to low-cost audio DACs.

Each SiI 9993 comes pre-programmed with unique HDCP keys, greatly simplifying the manufacturing process, lowering costs and providing the highest level of HDCP key security available.

The SiI 9993 easily receives HD video from cables in excess of 15 meters for greater system flexibility.

Applications

• DTVs

• Plasma Displays

• LCD TVs

• Projectors

The SiI9993 PanelLink Cinema Receiver

(Set-top Box, DVD, D-VHS, A/V Receiver)

Audio/Video

Source

Host

Pixel Data

Clock

S/PDIF

I2C

I 9190

PanelLink

HDMI

Transmitter

Channels 0, 1, 2

Channel C

DDC

(DTV, Plasma Display, LCD TV, Projector)

I 9993

PanelLink

HDMI

Receiver

Pixel Data

Display

Clock

Audio

DAC

Video

Processing

©2003 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, PanelLink, the PanelLink logo, PanelLink Cinema, the PanelLink Cinema logo, SiI, SiI 9993 and TMDS are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. Other trademarks are the property of their respective holders. Product specifications are subject to change without notice. Printed in the U.S.A.1/03 SiI PB-0037

Silicon Image, Inc. 1060 E. Arques, Sunnyvale, CA 94085 T 408.616.4000 F 408.830.9530 www.siliconimage.com

SiI 9993 Features

PanelLink CinemaTMReceiver

Industry-Standard Compliance

• HDMI 1.0

• DVI 1.0

• EIA/CEA-861B

• HDCP 1.1

Digital Video Output

• Integrated PanelLink®core supports all DTV resolutions (480i/576i/480p/576p/720p/1080i)

• Flexible digital video interface

- 24-bit RGB 4:4:4

- 24-bit YCbCr 4:4:4

- 16/20/24-bit YCbCr 4:2:2

- 8/10/12-bit YCbCr 4:2:2

(ITU.656)

• Analog RGB and YPbPr output

- Integrated 10-bit DAC

- Separate or composite syncs

(sync on Y/G)

• Integrated RGB-to-YCbCr color space conversion

• 4:2:2Ù4:4:4 converter

Digital Audio Output

• Industry-standard S/PDIF and I2S output

• Programmable I2S output supports numerous low-cost audio DACs

• Supports IEC60958 2-channel PCM (48kHz)

• Capable of carrying IEC61937 compressed audio (Dolby Digital, DTS, etc.)

Content Protection

• Integrated High-bandwidth Digital Content Protection (HDCP) cipher engine

• Pre-programmed HDCP keys

- Simplify manufacturing process

- Most secure solution available

- Lower system, manufacturing costs

• Decrypts both video and audio

System Operation

• Register-programmable via slave I2C interface

• Flexible interrupt registers with interrupt pin

Power Management

• 3.3V core provides low-power operation

• Flexible power-down modes

• Standby mode consumes less than 10mW

Part Number - SiI9993CT100 - Production HDCP keys

SiI9993CT100-PUB - Public HDCP keys, for development only SiI9993CTG100 - Production HDCP keys, Pb-free package

Silicon Image’s SiI 9993 Starter Kit (CP9000HDMI)

Contents include:

Hardware

• HDMI Mother Board

• SiI 9190 Transmitter Daughter Board

• SiI 9993 Receiver Daughter Board

• HDMI to HDMI cable

Software

• DemoCP Transmitter Software Tool

• HDMIGear Receiver Software Tool

Documentation

• User’s Guide

• Data Sheets

• Application Notes

The SiI9993 PanelLink Cinema Receiver

DDC

EXT_RES

Tx0

Tx1

Tx2

TxC

PROM

HDCP Keys

PanelLink

Receiver

INT

RESET

SiI 9993

Registers

and

Configuration

Logic

HDCP

Cipher

XOR

Mask

I2C

Audio

Decode

RGB-to-YCbCr

Color Space

Converter/

4:2:2 to 4:4:4 Up/

Down Converter

10-bit

DAC

S/PDIF

I2S

Y/G

Pb/B

Pr/R

D[23-0]

VSYNC

HSYNC

ODCK