Philips SIC4014H/G7 User manual

Glide Handheld Scanner

SIC4014H/G7

User Manual

Scanner à main Glide

Manuel d'utilisation

Escáner de mano deslizante

Manual del usuario

ENGLISHFRANÇAISESPAÑOL

Package Contents

• Glide Handheld Scanner • Mini USB Cable • Software CD

•

Four AAA Battery • User Manual • Quick Start Guide

•

Calibration Sheet • Cleaning Cloth • Pouch

Important Safety Instruction

• Keep away from water or moisture and dusty areas.

• Do not place this product under direct sunlight or near heat sources, such as in a closed car under sunlight or near a stove. The outer casing of this product may become deformed and the sophisticated sensors inside may become damaged due to excessive heat.

• The battery and inside of the scanner become hot during large volume scanning operation. Allow few minutes to cool-down before operating the unit again.

• Ambient temperature ranges from 0°C to +40°C.

• Only use attachments/accessories speciﬁ ed by the manufacture.

• Avoid using the scanner in a dusty environment. Dust particles and other foreign objects may damage the unit. Place the scanner in the pouch if not in use.

• Operate the scanner on a level, well-grounded work surface, free of excessive vibration.

• Do not attempt to disassemble or modify this product. Attempting to do so is extremely dangerous and will void the warranty.

• When replacing AA A batteries, only use the ones with same capacity. Do not mix new batteries with used ones.

• Please recycle the batteries in accordance with local regulations. Disposing of a battery in ﬁ re may cause an explosion.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer

where you purchased the product.

Table of Contents

Package Contents ...................................................................................... 1

Important Safety Instruction ........................................................................ 1

Product Overview ....................................................................................... 3

Placing AAA Batteries ................................................................................. 4

Inserting a microSD Card ........................................................................... 4

Power on/off ...............................................................................................4

Scanning ..................................................................................................... 5

Playback ..................................................................................................... 6

Viewing the images ................................................................................... 6

Zoom ........................................................................................................ 6

Delete ...................................................................................................... 6

Settings ....................................................................................................... 7

Connecting to a PC ....................................................................................8

Transferring the Scanned Images to PC ..................................................8

Disconnect the scanner from a PC .......................................................... 8

ezScanPal V2.0 Software Installation ......................................................... 9

A glance at ezScanPal V2.0 ....................................................................... 9

Cleaning and Calibrating .......................................................................... 10

Cleaning the scanner .............................................................................. 10

Calibrating the scanner ........................................................................... 10

Helpful Hints ............................................................................................. 10

Speciﬁ cations ........................................................................................... 12

One (1) Year Limited Warranty ................................................................. 13

Product Overview

Battery Indicator

LCD Screen

Left button

2 3 4 5 6

8 9

10 11

• Moves left in the menu.

• Moves to the previous scanned image.

Menu button

• Moves up in the menu.

• Brings up the Mode menu.

Right button

• Moves right in the menu.

• Moves to the next scanned image.

Power/Scan

button

Battery cover

Playback

Setting

• Press and hold to turn the power on/off.

• Press slightly to start/stop the image scan.

• Select to view the scanned images.

• Select to make Scan Setting and System Setting.

Delete button

• Moves down in the menu.

• Brings up the Delete menu.

OK/Zoom button

• Press to make or conﬁ rm the selection in the menu.

• Zoom the scanned image.

MicroSD card slot

Mini USB port • Connects to PC for ﬁ le transfer.

Alignment guide • Alignment reference before scanning.

• Compatible with a microSD card up to 32GB.

Placing AAA Batteries

1. Gently push and slide the battery cover away from the LCD screen.

2. Place 4 alkaline batteries according to the polarity indicators inside the compartment.

3. Slide back the battery cover.

Note:

• A new set of batteries will scan approximately 300 A4-sized color

documents at 300 dpi or 200 A4-sized color documents at 600 dpi with new batteries installed.

• Remove batteries if the scanner is not used for long time.

Inserting a microSD Card

Insert a microSD card into the card slot with metal side up to scan and store the images.

Note: The microSD card must be formatted by the scanner for the ﬁ rst time use. It is recom- mended to save any images on the memory

card before reformatting.

Formatting the microSD memory card

1. Insert a new microSD card into the scanner, then turn on the scanner.

2. Select

3. Select

4. Press

OK/Zoom button.

5. Select "Yes" to comﬁ rm formatting.

(Setting), and press OK/Zoom button.

SYSTEM

(System Setting), and press OK/Zoom button.

Left / Right button repeatedly to select FORMAT and press

microSD card (required, not included) should be inserted

with metal side up.

Power on/off

• Press and hold Power/Scan button for a few seconds to turn ON/OFF.

Scanning

1. Press and hold Power/Scan button to turn on the power.

Note:

2. Select

3. Place the scanner ﬂ at against the document with the scanning lens facing

4. Press

5. Follow the arrow indication on the LCD screen to

6. To stop scanning, press Power/Scan button again.

7. To start a new scan, repeat the steps 3~6.

Note:

• The progress bar status during the scanning:

message appears on the screen if no card is inserted.

CARD

(Setting) >

(Scan Setting)

SCAN

> Direction to set the scan

direction to Up or Down.

down. Make sure the area you want to scan is between the Alignment guides.

Power/Scan button to activate the Scan. The

Scanning

scanning

Scanning

icon appears.

slowly slide the scanner up or down and keep your hand stable to get the best quality picture.

The scanned image will show on the screen and save to the memory card automatically.

Green Good scan.

Orange Poor scan. Lower the scan speed.

Exclamation mark Unsuccessful scan. Please re-scan.

Helpful Hints:

• Scan at a slow and constant speed to optimize scan quality.

• When scanning books or magazines, begin scan from the bind and glide

outward.

Playback

Viewing the images

1. Select (Playback), and then press OK/Zoom button.

2. Press Left or Right button to view the previous or

next images.

Note: To return to the main menu, press Menu button.

Zoom

1. Select the image you want to zoom in the (Playback) mode.

2. Press OK/Zoom button repeatedly to zoom in the image.

Press the directional buttons ( Up/ Down/ Left / Right) to

navigate around the image.

4. To exit the Zoom mode, press OK/Zoom button repeatedly.

Delete

1. Select the image you want to delete in the (Playback) mode.

2. Press Delete button, select DELETE ONE or

DELETE ALL, then press OK/Zoom button.

3. Select Yes, and then press OK/Zoom button to

delete.

4. To exit the Delete menu, press Menu button.

DELETE

Main Menu

ONE

DELETE

ALL

Settings

1. Select Setting, and then press OK/Zoom button.

2. Press

System Setting and then press OK/Zoom button.

3. Press

and then press OK/Zoom button.

Left / Right button to select either

Scan Setting or

SCAN

Left / Right button to select the option you wish to change

SYSTEM

Note: To return to the

Setting mode for more tasks, press Menu

button.

Menu Sub-menu Descriptions

Color Mode Select Color or Gray mode for the scanning. Resolution Select 300 dpi or 600 dpi for the scanning. Direction Sets the scanning direction to Down or Up.

Scan Setting

System Setting

File Type

Calibration

Language

Format

Factory Default

Select JPG or PDF ﬁ le format for the scanning.

Calibrates the scanner. Refer to Calibrating the scanner for details.

Select a screen display language list out the languages.

Formats all the data stored in the memory card.

Restores the current settings to the factory presets.

Connecting to a PC

Transferring the Scanned Images to PC

1. Turn off the power before connecting to a PC.

2. With the microSD inserted to the scanner, connect the mini USB cable to

the Scanner and then to a USB port on your computer.

Note:

microSD card should be inserted with metal side up.

3. Turn on the power of the scanner.

4. Your computer will recognize the scanner as a removable disk. Click

“Open folder to view ﬁ les”.

5. You may transfer the scanned images to your PC using the drag and drop

method.

Disconnect the scanner from a PC

• Double click the "Safely Remove Hardware" icon in Windows before re-

moving the USB connection.

Note:

• The above steps may vary in different Windows versions.

•

If the removable device window did not launch automatically, go to “My

Computer” and ﬁ nd the device under removable disk.

ezScanPal V2.0 Software Installation

1. Insert the software CD into your CD/DVD drive. The installation will start automatically.

2. Follow the on-screen instructions to complete the process.

Note:

•

You must install ABBYY FineReader and Adobe Acrobat Reader to

enable the OCR Utility and PDF Utility in ezScanPal V2.0

• The software contained in this CD is compatible with Windows XP/Vista/7.

A glance at ezScanPal V2.0

ezScanPal V2.0 is an easy-to-use image processing application which enables the direct communication between the scanner and the PC.

Toolbar

Help

Thumbnail Window

Note: ezScanPal V2.0 does not support PDF display. You may use Adobe Acrobat Reader to open PDF ﬁ les instead. For detailed information on how

to use each function, please refer to the Help section.

Cleaning and Calibrating

• To get high image quality and good recognition results, please perform the

step below from time to time.

• Make sure the cleaning cloth and calibration paper are clean and free of

dust before use.

Cleaning the scanner

• Wipe the scanner lens lightly using the supplied cleaning cloth.

• Do not use any solvent to clean the scanner.

• Do not use rough material such as nylon scouring pad to wipe the scanner.

Calibrating the scanner

1. Place the calibration paper on a ﬂ at surface with the white side facing up.

2. Turn on the scanner.

3. Select CALIBRATION by following the

steps below: SETTING > SCAN SETTING > CALIBRATION> Yes.

4. Hold the calibration paper ﬁ rmly by one hand, with the other hand slide

forward/backward the scanner slowly against the paper. The calibration starts.

5. When the calibration is done, a message "Complete" appears and the

scanner will shut down automatically.

Helpful Hints

•

Why isn't the scanner turning on?

Please push to open the battery compartment to verify that all batteries

are installed properly.

•

Why won't the memory card ﬁ t?

Philips Glide only uses microSD cards. While inserting the memory card,

push the card in with metal side face up, until the "click".

To remove the card, simply press down on the card. Memory card will

push out automatically.

•

Why isn't the scanned image clear?

It is recommended to clean scanning sensor before usage with supplied

cleaning cloth. Scanning at a consistently slow speed will increase scanning quality.

•

Why is the scanned image not proportional?

Scan at a slow and constant speed will increase scanning quality.

•

What's the best way to scan from inside of a book?

When scanning a source with a binding, we recommend you start from

the binding and glide outward.

•

Why are the scanned images backwards?

You must scan in the direction the arrow is pointing.

To change the scan direction:

1. Press the MENU button and Choose SETTINGS.

2. Scroll to Scan Setting.

3. Choose DIRECTION to personalize the direction you are comfortable

scanning from.

•

How do I view the pictures from my computer?

1. With the scanner in the OFF position, establish USB connection with

mini USB cable (Included).

2. Plug the bigger USB connector into your computer.

3. Turn on the scanner by pressing the power button.

4. Your computer will detect this computer as a "portable drive", same as

a USB ﬂ ash drive.

•

How can I contact Philips for more support? You can reach us at : 1-877-784-0999 Monday-Friday: 10am - 10pm EST Saturday-Sunday: 12pm - 9pm EST closed on all nationally observed holidays.

•

I want to change the "File Created" date on these photos scanned, how

can I do that?

1. Install ezScanPal V2.0 software that came with your scanner.

2. Insert microSD (with SD adaptor) into your PC.

3. Open EzScanPal V2.0 software then RIGHT click on the photo desired, then press PROPERTIES.

4. Click on File Date, then change from the menu.

5. Conﬁ rm your changes by pressing the green check mark.

If you have additional questions about this scanner, please refer to the FAQ’s at www.philips.com/support and lookup product SIC4014H/G7.

Speciﬁ cations

Scanner Type: A4 CIS

Display:1” Color STN LCD (64 x 96 pixels)

Scan Size: Up to A4 size

Scan Mode: Color 24-bit / Gray 24-bit

Scan Resolution: 300 / 600 dpi

Scan Speed: 5 seconds for a A4 color document at 300 dpi

Auto Power Off: 2 minutes

Memory Card Slot: MicroSD (Up to 32GB)

I/O Ports: USB mini-B

Power Supply: Alkaline batteries (AAA x 4)

File Format: JPG/PDF

Dimensions: 258 x 32.9 x 30.7 mm ; 10.2" x 1.3" x 1.2"

Weight: 163g/0.4lbs (without battery)

Supported OS for Mass Storage: Windows XP / Vista / 7 ; Mac OS X 10.4 ~ 10.7

Philips Glide Handheld Scanner

10 seconds for a A4 color document at 600 dpi

One (1) Year Limited Warranty

WARRANTY COVERAGE:

This warranty obligation is limited to the terms set forth below.

WHO IS COVERED:

This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (”Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product. The Company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for the remaining portion of the original product’s warranty. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes the company’s property. When a refund is given, your product becomes the company’s property.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED – EXCLUSIONS AND LIMITATIONS:

This Limited Warranty applies only to the new products that can be identiﬁ ed by the trademark, trade name, or logo afﬁ xed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips hardware manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

The Company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than an Authorized Service Location, (c) to a product or a part that has been modiﬁ ed without written permission, or (d) if any serial number has been removed or defaced, or (e) to a product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips products sold “As IS” by some retailers.

+ 33 hidden pages