AirFloss Ultra
EN: User manual
RU: Руководство пользователя KZ: Пайдаланушы нұсқаулығы
1
1
2
3
4
5
6
7
8
9
English 6
Русский 16 Қазақша 25
6 English
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Use AirFloss with your favorite mouthwash as part of your oral care routine. In addition to brushing, AirFloss helps reduce the plaque in between teeth in order to improve your gum health.
Read this important information carefully before you use the appliance and save it for future reference.
-Keep the charger away from water. Do not place or store it over or near water contained in a bathtub, washbasin, sink etc. Do not immerse the charger in water or any other liquid. After cleaning, make sure the charger is completely dry before you connect it to the mains.
-The mains cord cannot be replaced. If the mains cord is damaged, discard the charger.
-Always have the charger replaced with one of the original type in order to avoid a hazard.
English
English 7
-Use only charger type HX6100 provided with the AirFloss Ultra to recharge the battery.
-If the appliance is damaged in any way (AirFloss Ultra nozzle, handle and/or charger), stop using it.
-This appliance contains no serviceable parts. If the appliance is damaged, contact the Consumer Care Centre in your country (see chapter ‘Warranty and support').
-Do not use the charger outdoors or near heated surfaces.
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
8 English
-Consult your dentist before you use this appliance if you have had recent oral or gum surgery, suffer from an ongoing dental condition, had extensive dental work in the previous 2 months, or have suspected issues with your dental work (filings, crowns, etc.).
-Consult your dentist if excessive bleeding occurs after using this appliance or if bleeding continues to occur after 4 weeks of use.
-If you have medical concerns, consult your doctor before you use this appliance.
-This Philips appliance complies with the safety standards for electromagnetic devices. If you have a pacemaker or other implanted device, contact your physician or the appliance manufacturer of the implanted appliance prior to use.
-Do not use attachments other than the ones recommended by the manufacturer.
-Do not exert excessive pressure on the nozzle tip of the nozzle.
English 9
-To avoid physical injury, do not fill the reservoir with hot water. Do not put foreign objects in the reservoir.
-Only use the AirFloss Ultra for its intended purpose as described in this user manual.
-To avoid physical injury, do not direct the spray under the tongue or into the ear, nose, eye or other sensitive area.
-Do not clean the AirFloss Ultra nozzle, the handle, the charger, the water reservoir and its cover in the dishwasher or a microwave.
-To avoid an ingestion hazard, do not put isopropyl alcohol or other cleaning fluids in the reservoir.
-The AirFloss Ultra is a personal care appliance and is not intended for use on multiple patients in a dental practice or
institution.
This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
1Nozzle tip
2AirFloss Ultra nozzle
10 English
3Activation button
4Reservoir and reservoir door
5Handle
6Charge & burst mode indicators - Single burst: 1 LED
- Double burst: 2 LEDs - Triple burst: 3 LEDs
7Power/mode button
8Removable nozzle holder (select models)
9Charger
Note: The contents of the box may very based on the model purchased.
Charge the AirFloss Ultra for 24 hours before first use.
1Put the plug of the charger in the electrical outlet.
2Place the handle on the charger.
Charging process: (Fig. 3)
-1 green LED: 33% charged.
-2 green LEDs: 66% charged.
-3 green LEDs: 100% charged.
Note: When it is fully charged, AirFloss Ultra has an operating time of up to 11 days when it is used in triple burst mode, and up to 33 days when it is used in single burst mode.
Note: When the charge indicators flash yellow, the battery is low and needs to be recharged (fewer than 3 uses left).
1Align the nozzle and press the nozzle down onto the handle (‘click’) (Fig. 4).
Note: We advise you to place the tip facing the front of the handle as the illustration shows, but the nozzle can be placed in the handle either way without affecting the function. You can try both options and use what works best for you in your oral care routine.
English 11
Note: Replace the nozzle (HX8032, HX8033) every 6 months for optimal results. Also replace the nozzle if it becomes loose or no longer ‘clicks’ onto the handle.
Note: The AirFloss Ultra only supports AirFloss Ultra nozzles. Do not attempt to use non-AirFloss Ultra nozzles on the AirFloss Ultra handle.
2Open the cover of the reservoir (‘click’) (Fig. 5).
3Fill the reservoir with mouthwash or water. (Fig. 6)
Tip: For the best result and a fresher experience, we advise you to use mouthwash with your AirFloss Ultra.
Note: Do not use mouthwash that contains isopropyl myristate (e.g. Dentyl Active) or high concentrations of essential oils, as it may damage the appliance. This includes all mouthwash sold in glass and ceramic packaging.
4Close the cover of the reservoir by pressing (‘click’) (Fig. 7).
5Press the power/mode button to switch on the appliance. (Fig. 8) The LEDs illuminate.
6Press and hold the activation button until spray comes out of the tip of the nozzle. (Fig. 9)
1Make sure the AirFloss Ultra is switched on. If it is off, press and release the power/mode button to switch on the appliance. (Fig. 8)
You can change the modes to have the desired amounts of bursts each time you press the activation button (Fig. 9). For optimal results, use the triple burst mode (the default setting) from both the outside and inside of your teeth.
To change modes, press the power/mode button to cycle through the modes until you reach your desired mode. The LEDs show the selected mode:
-Single burst: 1 LED (Fig. 10)
-Double burst: 2 LEDs (Fig. 11)
-Triple burst: 3 LEDs (Fig. 12)
12 English
Note: The AirFloss Ultra remembers what mode was selected last and it is ready for the next use. If your AirFloss Ultra becomes fully drained of power, it will go back to the triple burst default mode once it has been recharged.
2Place the nozzle tip between two teeth at your gum line. Slightly close your lips over the nozzle when it is in place, to avoid splashing. (Fig. 13)
3Press the activation button to deliver 1-3 bursts (depending on the selected mode) of air and micro-droplets of mouthwash or water between the teeth. (Fig. 14)
4Slide the nozzle tip along the gum line until you feel it settle between the next two teeth.
5Continue this procedure for all spaces between your teeth, including behind your back teeth. (Fig. 15)
Note: Refill the reservoir as needed.
Hold the activation button to deliver bursts continuously, approximately one second between set of bursts.
The AirFloss automatically turns off if it has not been used for one minute.
If the AirFloss Ultra becomes clogged, or to clean the inside of the AirFloss, fill the reservoir with warm water and press the activation button until the reservoir is empty.
Do not clean the nozzle, handle or charger in the dishwasher.
Do not use cleaning agents to clean the appliance. The formulation or strength of some agents may damage the appliance.
1Remove the AirFloss Ultra nozzle from the handle. Rinse the nozzle after each use to eliminate the residue left in it. (Fig. 16)