Philips SHB9100WT-00 User Manual

Quick start guide

Philips Bluetooth stereo headset SHB9100WT

Pair the headset with your mobile phone

1 Make sure that your mobile phone is

turned on and its Bluetooth feature is activated.

2 Make sure that the headset is charged

and turned off.

3 Press and hold until the LED starts

ashing white and blue alternately.

» The headset is in pairing mode,

which lasts ve minutes.

4 Pair the headset with your mobile

phone. For details, refer to the user manual of the mobile phone.

10:35

Settings

Bluetooth

Add

Add Bluetooth

Bluetooth device

device

Select

Connectivity

Back

10:36

Settings

Devices Found

Philips SHB6000

Philips SHB9100WT

Select

Back

10:37

Settings

Enter Password

Select

Enter “0000” (4 zeros), if prompted to enter the pin code of the headset.

****

0000

Connectivity

Back

Please refer to www.philips.com/welcome for full user manual.

Use your headset

Turn the headset on.

Turn the headset off.

Play or pause music.

Pick up or terminate a call.

Reject a call.

Redial the last number.

Switch caller in a call.

Transfer a call to your mobile phone. (This function is available if your mobile phone supports this feature.)

Adjust volume. Slide up / down VOL +/-

Skip forward. Press

Skip backward. Press twice

Mute/unmute the microphone in a call. Press

Activate voice dialing Press twice

*Available if supported by your mobile phone.

Press and hold for more than 4 seconds

Press

Press and hold

Press twice

Press and hold for more than 4 seconds

Other status and indicators

The headset is connected to a Bluetooth device, while the headset is in standby mode or while you are listening to music.

The headset is ready for pairing. LED ashes whiteand blue alternately.

The headset is on but not connected to a Bluetooth device.

There is an incoming call. Blue LED ashes twice per second.

Low battery. White LED ashes.

Battery is fully charged. White LED ashes.

The LED is off. The headset is off./Charging is nished.

The headset beeps every 5 seconds The Mic is muted.

Blue LED ashes every 8 seconds.

Blue LED ashes fast.

Welcome to Philips!

For an optimal experience, register your product at

www.philips.com/welcome