Philips SHB6017 User Manual

Quick start guide
Exchangeable ear caps
Power on/off
Mic
LED
Charging socket
Settings Connectivity
Select
Back
Enter Password
Settings
Devices Found
Select
Back
Philips SHB6017
Settings Connectivity
Bluetooth
Select
Back
Add Bluetooth device
Philips Bluetooth stereo headset SHB6017
EN
Charge the headset
1 Remove the USB cap.
2 Plug the headset into a powered
USB por t with USB charging cable.
Get the best fit
1 Choose the earbuds that best t for your ear canal. 2 Gently blend the earhook to t into your ears. 3 Adjust the rubber par t of the earhook to the height
that you feel t.
4 Twist the earbuds to the right position for best t and
noise isolation.
Pair the headset with your mobile phone
1 Ensure that the mobile phone is turned
on and its Bluetooth feature is activated.
2 Ensure that the headset is charged and
turned off.
3 Press
and blue alternately. Do not stop pressing the button after seeing the blue LED only.
»
4 Pair the headset with the mobile phone.
For details, refer to the user manual of the
mobile phone.
Please refer to www.philips.com/welcome for full user manual.
until the LED starts ashing red
The headset is in pairing mode, which
lasts ve minutes.
The PIN code ''0000''
is not required for
some mobile phones.
Operate the headset
Turn headset on/off
Play / Pause music
Stop music
Next / Previous track Tap /
Adjust volume Press VOL +/VOL -
Pick up / End a call
Reject a call
Redial the last number
Activate voice dialing*
Mute/Unmute the Mic
Transfer a call to a mobile phone
*Available if supported by your mobile phone.
Hold
Tap
Hold
Tap
Hold
Press
Hold
Double tap
Hold
until LED turns on/off.
twice quickly.
until beep occurs.
during a call.
during a call.
LED and sound indication
The red/blue LED ashes alternately. The headset is ready for pairing.
The blue LED ashes once every 6
seconds.
The blue LED ashes twice every 3
seconds.
The blue LED ashes once every half a
second.
The blue LED ashes once every second. The headset is active on a call.
The red LED ashes three times and beeps twice every minute.
Solid red LED. The headset is charging.
The LED is off. The headset is off./Charging is nished.
The headset beeps every 5 seconds. The Mic is muted.
The headset is connected to the device.
The headset is not connected.
There is an incoming/outgoing call.
The battery is low in power.
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. V1.0
Loading...