SHB6000-00
Table of contents
Loading...
Register your product and get support at
www.philips.com/welcome
Bluetooth stereo headset
SHB6000/00
SHB6000/28
EN User manual
Contents
1 Important 2
Hearing Safety 2
Electric-, Magnetic- and Electromagnetic Fields (EMF) 2
General information 2
Disposal of your old product 2
Battery disposal 2
Remove the integrated battery 2
Notice for the European Union 3
Notice for USA (FCC) 3
Notice for Canada 3
Trademarks 3
2 Your bluetooth stereo headset 4
Introduction 4
What’s in the box 4
Compatibility 4
Overview of your Bluetooth stereo headset 5
3 Get started 6
Charge the headset 6
Pair the headset with your mobile phone 6
4 Use the headset 7
Connect the headset to your mobile phone 7
Automatic power saving 7
Get the best t 7
Operate the headset 7
Manage 3-way calls 7
LED and sound indication 7
Clean the headset 7
English
5 Technical data 8
6 Frequently asked questions 9
EN
1
2 EN
1 Important
Hearing Safety
The integrated battery shall not be exposed to excessive heat •
such as sunshine, re or the like.
Ensure that there is no foreign objects inside the USB cover •
and close the cover tightly.
Disposal of your old product
Danger
To avoid hearing damage, limit the time you use the headphones at high volume •
and set the volume to a safe level. The louder the volume, the shor ter is the safe
listening time.
Be sure to observe the following guidelines when using your
headphones.
Listen at reasonable volumes for reasonable periods of time.•
Be careful not to adjust the volume continuously upwards as •
your hearing adapts.
Do not turn up the volume so high that you can’t hear what’s •
around you.
You should use caution or temporarily discontinue use in •
potentially hazardous situations.
Excessive sound pressure from earphones and headphones •
can cause hearing loss.
Using this headset with both ears covered while driving is not •
recommended and may be illegal in some areas while driving.
For your safety, avoid distractions from music or phone calls •
while in trafc or other potentially dangerous environments.
Electric-, Magnetic- and Electromagnetic Fields (EMF)
1. Royal Philips Electronics manufactures and sells many products
targeted at consumers, which, like any electronic apparatus, in
general have the ability to emit and receive electromagnetic signals.
2. One of Philips’ leading Business Principles is to take all necessary
health and safety measures for our products, to comply with all
applicable legal requirements and to stay well within the EMF
standards applicable at the time of producing products.
3. Philips is committed to develop, produce and market products that
cause no adverse health effects.
4. Philips conrms that if its products are handled properly for their
intended use, they are safe to use according to scientic evidence
available today.
5. Philips plays an active role in the development of international
EMF and safety standards, enabling Philips to anticipate further
developments in standardization for early integration in its products.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product
it means that the product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste. Correct disposal of
your old product helps to prevent potential negative consequences
for the environment and human health.
Battery disposal
Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on separate collection
of batteries. The correct disposal of batteries helps prevent
potentially negative consequences on the environment and human
health.
Remove the integrated battery
Warning
Make sure the headset is disconnec ted from the USB charging cable •
before removing the bat tery.
If there is no collection/recycling system for electronic products in
your country, you can protect the environment by removing and
recycling the battery before disposing the headset.
General information
To avoid damage or malfunction:
Do not expose the headset to excessive heat.•
Do not drop your headset.•
The headset can be washable under running tape water •
while the charging socket shall not be exposed to dripping or
splashing.
Do not allow your headset to be submerged in water.•
Do not use any cleaning agents containing alcohol, ammonia, •
benzene, or abrasives.
About operating and storage temperatures
Do not operate or store in a place where temperature is •
below -15ºC (5ºF) or above 55ºC (131ºF) as this may shor ten
your battery life.
3
English
EN
Notice for the European Union
Notice for Canada
Hereby, Philips Consumer Lifestyle, BG Accessories, declares that this
Philips Bluetooth headset SHB6000 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
This product has been designed, tested and manufactured according
to the European R&TTE Directive 1999/5/EC.
Notice for USA (FCC)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Relocate the receiving antenna.•
Increase the separation between equipment and receiver.•
Connect the equipment into an outlet on a circuit different •
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for •
help.
Operation is subject to the following two conditions:
a This device may not cause interference3 and
b This device must accept any interference, including
interference that may cause undesired operation of the
device. The term “IC:” before the certication / registration
number only signies that registration was performed based
on a Declaration of Conformity indicating that Industry
Canada technical specications were met. It does not imply
that Industry Canada approved the equipment.
Trademarks
Trademarks are the property of Koninklijke Philips Electronics N.V.
or their respective owners. The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc. and any use of such marks by
Koninklijke Philips Electronics N.V. is under license.
Warning
Changes or modications made to this equipment not expressly •
approved by Philips may void the FCC authorization to operate this
equipment.
Note
FCC/IC Radiation Exposure Statement: This equipment complies •
with FCC/IC r adiation exposure limits set forth for an uncontrolled
environment. End users mus t follow the specic operating instructions
for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction •
with any other antenna or transmitter.
Philips Consumer Lifestyle
A division of Philips Electronics North America Corporation
P.O.Box 10313
Stamford, CT 06904
Phone: 1-888-PHILIPS (744-5477)
Loading...