Philips SE 745 User Manual

Switch the handset On/Off

Press and hold e key for 3 seconds to switch off the handset in idle mode.

Short press

Keypad lock/unlock

Press and hold * key for 2 seconds to lock/unlock the keypad in idle mode.

Paging

1. Press p key on the base station. All the registered handsets start to ring.

2. Once retrieved, press any key on the handset to end the paging.

Listen to messages recorded on the answering machine (for SE745 only)

Your answering machine is activated by default. If you have new messages, the message counter on your base station will blink with the indication of the number of new messages received.

Press Press

Press

Press delete all messages (except unread messages).

Refer to your SE745 User Manual for details about the answering machine function.

e key to switch on the handset.

P on the base station to play phone messages (the first recorded message will be played first). P again to stop message playback.

R to skip the current message and play the next message. l to go back to the previous message (if pressed within 1 second of current message playback). l to replay current message (if pressed after 1 second of current message playback). V to adjust speaker volume during message playback. x to delete the current message during message playback. Long press x in idle mode to

Frequently asked questions

For more information, please refer to the User Manual that came with your phone.

Problem Solution

• There’s no dialling tone! • Check the connections

• Charge the batteries

• Use the line cable provided in the box

• Caller cannot hear me clearly!

SEARCHING... is displayed

• on handset and icon is

blinking!

• Caller’s number is not displayed!

• Move closer to the base station

• Move the base station at least one metre away from any electrical appliances

• Move closer to the base station

• Make sure that your base station is correctly plugged

• Reset your unit and restart handset registration

• Check your subscription with your network operator

Need help?

User Manual

Refer to the User Manual that came with your SE745.

Online help

www.philips.com/support

Telephone SE745

Welcome

Quick start guide

Connect

Install

Enjoy

Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

Specifications are subject to change without notice.

www.philips.com

3111 285 38641

Printed in China

What’s in the box

Connect

Connect the base station

Enjoy

Handset

Base support

*You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.

In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.

WARNING Always use the cables and batteries that came with your phone.

2 AAA rechargeable

Base station for SE745

Power supply

NiMH batteries

Guarantee

Battery door

Line cord*

Quick Start GuideUser manual

1. Place the base station in a central location near the telephone line socket and electricity socket.

2. Place the base station face down so that you can see the bottom of the base station. Attach the base support to your base station by fitting the tabs of the base support into the corresponding slots on the base unit. Push into place until a click sound is heard.

3. Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown.

4. Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

1211 13

Install

Insert rechargeable batteries and charge

Insert batteries Charge handset for 24 hours

Configure your phone (if necessary)

After charging your phone for a few minutes, a Welcome screen may appear depending on the country where you live. If the Welcome screen appears:

: to the word WELCOME in your preferred language and press mSELECT to confirm

1. Scroll your selection.

: to your country and press mSELECT to confirm your selection.

2. Scroll

3. Press

: to your operator (if necessary) and press mSELECT again to confirm your selection.

Set date and time

1. Press mMENU in idle mode, scroll : to Clock & Alarm and press mSELECT, press

mSELECT again to enter Set Date/Time.

2. Enter the current time (HH:MM) and current date (DD/MM/YY) and press

A validation tone is emitted and your phone is now ready for use.

mOK.

Make a call

Dial the number and press r key.

v key to take the line and dial the number.

Press

Answer a call

When the phone rings, press r key.

End a call

To end a conversation, press e key.

Adjust earpiece volume

During a call, press : to select from Volume 1 to Volume 5.

Set the ring melody

1. Press mMENU in idle mode, scroll : to Personal Set and press mSELECT, press mSELECT to

enter Handset Tones, scroll

: to your desired melody to play the melody.

2. Scroll

3. Press

mSELECT to set the ring melody.

A validation tone is emitted and the screen returns to previous menu.

Store a contact in the phonebook

1. Press mMENU in idle mode, scroll : to Phonebook and press mSELECT, press mSELECT to

enter New Entry.

2. Enter the name of the contact (maximum 14 characters) and press

3. Enter the phone number and press

4. Scroll

: to choose a group (<No Group>, <Group A>, <Group B>, <Group C>) and press

: to Ring Melody and press mSELECT.

mOK.

mSELECT.

A validation tone is emitted.

Access the phonebook

1. Press d in idle mode and scroll : to browse the phonebook.

2. To view the details of a phonebook entry, scroll

3. To dial a number from the phonebook, scroll

: to the phonebook entry and press mVIEW.

: to the phonebook entry and press r.