Philips SE655 User Manual

Download

Page 1

www.philips.com/welcome

US-EN Telephone Answering Machine

Warning

Use only rechargeable batteries. Charge the handset for 24 hours before use.

SE650 SE655

Page 2

Page 3

Table of contents

1Important Safety

Instructions 5

2 Environment and safety 7

2.1 Safety information 7

2.2 Power requirements 7

2.3 Battery requirements 7

2.4 Telephone connection 7

2.5 Environmental care 8

2.6 Precautions 8

2.7 Equipment Approval Information 9

2.7.1 Notification to the Local Telephone Company 9

2.7.2 Rights of the Phone Company 9

2.8 Interference Information 10

2.9 Hearing Aid Compatibility (HAC) 11

2.10 FCC RF Radiation Exposure Statement 11

3Important 11

3.1 Power requirements 12

3.2 Electric, Magnetic and Electromagnetic Fields (“EMF”) 13

3.3 Recycle your batteries 13

4 The RBRC® seal 13

4.1 Service Centers 14

5 Your phone 16

5.1 What’s in the box 16

5.2 Overview of your phone 17

5.3 Display icons and Messages19

5.4 Overview of the

6 Getting started 22

6.1 Connect the base station 22

6.2 Wall mounting the base 22

6.3 Install your phone 23

6.3.1 Install battery 23

6.3.2 Charge battery 24

6.4 Remove/Attach belt clip 24

6.5 Install optional headset 25

6.6 Using multipacks 25

6.7 Menu structure 26

7 Using your phone 32

7.1 Make a call 32

7.1.1 Predialling 32

7.1.2 Direct dialling 32

7.1.3 Call from redial list 32

7.1.4 Call from the call log 32

7.1.5 Call from the phonebook 32

7.1.6 Call from the phonebook

7.1.7 Call using Direct Access

7.1.8 Enter a Dialing Pause 33

7.2 Answer a call 33

7.2.1 Handsfree answering 33

7.3 End a call 33

8Use more of

8.1 Switch the handset off/on 34

8.2 Keypad lock/unlock 34

base station 21

while already on the phone 32

Memory 33

your phone 34

Table of contents

Page 4

8.3 Text or number entry 34

8.4 Call in progress 34

8.4.1 Adjust earpiece or speaker volume 34

8.4.2 Mute/Unmute microphone 34

8.4.3 Activate/Deactivate loudspeaker mode 34

8.5 Chain dialing 35

8.6 Using your Phonebook 35

8.6.1 Store a contact in the phonebook 35

8.6.2 Access phonebook 35

8.6.3 Modify a phonebook entry 36

8.6.4 Select phonebook melody 36

8.6.5 Delete a phonebook entry 37

8.6.6 Delete all phonebook entries 37

8.6.7 Direct Access Memory 37

8.7 Using the Redial list 38

8.7.1 Access Redial list 38

8.7.2 View redial number details 38

8.7.3 Save a redial number into the phonebook 38

8.7.4 Delete a redial number 39

8.7.5 Delete all redial numbers 39

8.8 Call waiting 39

8.9 Using the Call log 39

8.9.1 Access the Call log 39

8.9.2 Save call list entry into the phonebook 40

8.9.3 Delete a call list entry 41

8.9.4 Delete all call list entries 41

8.10 Using the Intercom 41

8.10.1 Intercom another handset 41

8.10.2 Transfer an external call to another handset 41

8.10.3 Answer an external call during intercom 42

8.10.4 Switch between an internal

and external call 42

8.10.5 Establish a three-party

conference call 42

8.11 Paging 42

8.12 Clock and Alarm settings 43

8.12.1 Set Date and Time 43

8.12.2 Set Time and Date Format 43

8.12.3 Set Alarm 43

8.12.4 Set Alarm Tone 44

9 Personal settings 44

9.1 Change the Handset Name 44

9.2 Handset Tones 44

9.2.1 Set the Ring Volume 44

9.2.2 Set the Ring Tones 45

9.2.3 Activate/Deactivate

Key Beep 45

9.3 Change the Display Language 45

9.4 Select the Display Wallpaper 45

9.5 Select the Color Theme 46

9.6 Set the Display Contrast 46

9.7 Set the Backlight Time 46

9.8 Deactivate/Activate Auto Hang-Up 46

10 Advanced settings 47

10.1 Easy Call 47

10.1.1 Set Easy Call to On or Off 47

10.1.2 Set Easy Call number 47

10.2 Auto Conference 48

10.3 Call Barring 48

10.3.1 Set Call Barring Mode 48

10.3.2 Set a Call Barring number 48

10.4 XHD Sound 49

10.5 Change PIN 49

10.6 Registration 49

Table of contents

Page 5

10.6.1 Easy registration 50

10.7 Unregister 50

10.8 Reset Unit 50

10.9 Set Area Code 51

10.10 Set Auto Prefix 51

10.11 Change Flash time 52

10.12 Change the Dial Mode 52

10.13 Set First Ring Detection 52

10.14 Default Settings 53

11 Network Service 53

11.1 Call Forward 54

11.1.1 Change Call Forward

Activation Codes 54

11.1.2 Change Call Forward

Deactivation Code 54

11.2 Call Forward when Busy 55

11.2.1 Change Call Forward when

Busy Activation Codes 55

11.2.2 Change Call Forward when

Busy Deactivation Code 56

11.3 Call Forward when Unanswered 56

11.3.1 Change Call Forward when Unanswered Activation Codes 56

11.3.2 Change Call Forward when Unanswered Deactivation Code 57

11.4 Voice Mail 57

11.4.1 Access Voice Mail 57

11.4.2 Set Voice Mail Number 57

11.5 Voice Mail 2 57

11.6 Information Service 57

11.6.1 Access Info Service 58

11.6.2 Set Info Service Number 58

11.7 Information Service 2 58

11.8 Call Return 58

11.8.1 Access the Call Return

Service 58

11.8.2 Set Call Return Service

Number 58

11.9 Cancel Call Back 58

11.9.1 Call the Cancel Call Back

Number 59

11.9.2 Set the Cancel Call Back

Number 59

11.10 Withhold ID 59

11.10.1 Activating Withhold ID 59

11.10.2 Set the Withhold ID Code 59

12 Telephone answering

machine (TAM) 60

12.1 Playing Messages 60

12.1.1 Playback of messages via

handset 60

12.1.2 Functions available during

playback 60

12.2 Delete all messages 61

12.3 Turn the Answering Machine On/Off 61

12.4 Play, Record, or Delete an Outgoing Message 61

12.5 Set the Answer mode 62

12.6 Answering Machine Settings 62

12.6.1 Ring Delay 62

12.6.2 Remote Access 62

12.6.3 Handset Screening 63

12.6.4 Setting the Outgoing Message Language 64

13 Technical data 64

14 Frequently asked

questions 65

14.1 Connection 65

Table of contents

Page 6

14.2 Set-up 65

14.3 Sound 65

14.4 Product behaviour 66

15 INDEX 68

Table of contents

Page 7

1Important Safety

Instructions

Some of the following information may not apply to your particular product; however, when using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1 Read and understand all

instructions.

2 Follow all warnings and instructions

marked on the product.

3 Unplug this product from the wall

outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4 Telephones should not be used

while you are in a bathtub, shower or pool. Immersion of the telephone or handset in water could cause an electrical shock.

5 Slots and openings in the cabinet

back or bottom are provided for ventilation, to protect it from overheating.These openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface.This product should not be placed in a built-in installation unless proper ventilation is provided.

6 This product should be operated

only from the type of power source

indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

7 Do not allow anything to rest on

the power cord. Do not locate this product where the cord will be abused by persons walking on it.

8 Do not overload wall outlets and

extension cords as this can result in the risk of fire or electric shock.

9 Never push objects of any kind into

this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10 To reduce the risk of electric shock,

do not disassemble this product, but take it to a qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

11 Do not expose the product to

extreme temperatures such as areas near a hot radiator or stove or in a hot car.

12 Do not place lighted candles,

cigarettes, cigars, etc., on the telephone.

13 Never touch uninsulated telephone

wires or terminals unless the

Important Safety Instructions

Page 8

telephone line has been disconnected at the network interface.

14 Never install or modify telephone

wiring during a lightning storm.

15 Never install telephone jacks in wet

locations unless the jack is specifically designed for wet locations.

16 Use caution when installing or

modifying telephone lines to prevent electrical shock and/or fire.

17 Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the following conditions:

A When the power supply cord or

plug is damaged or frayed.

B If the product has been exposed to

rain or water.

C If the product does not operate

normally by following the operating instructions.

D If the product’s cabinet has been

damaged.

E If the product exhibits a distinct

change in performance.

18 Avoid using a telephone (other than

a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

19 Do not use the telephone to report

a gas leak in the vicinity of the leak.

20 Do not place this product on an

unstable cart, stand or table.The product may fall, causing serious damage to the product.

IF YOUR PRODUCT UTILIZES BATTERIES,THE FOLLOWING

ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED: 1 Use only the type and size of

battery(ies) specified in the user manual.

2 Do not dispose of the battery(ies)

in fire. They may explode. Check with local codes for possible special disposal instructions.

3 Do not open or mutilate the

battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4 Exercise care in handling

battery(ies) in order not to short out the battery(ies) with conducting materials such as rings, bracelets, and keys.The battery(ies) or conductor may overheat and cause burns.

5 Do not attempt to recharge the

battery(ies) provided with or identified for use with this product that are not intended to be charged.The battery(ies) may leak corrosive electrolyte or explode.

6 Do not attempt to rejuvenate the

battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery(ies) electrolyte may occur causing burns or irritation to eyes or skin.

7 When replacing battery(ies), all

batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture

Important Safety Instructions

Page 9

the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.)

8 When inserting battery(ies) into

this product, the proper polarity or direction must be observed. Reverse insertion of battery(ies) can cause charging, and that may result in leakage or explosion.

9 Remove battery(ies) from this

product if storing over 30 days because the battery(ies) could leak and damage the product.

10 Discard “dead” battery(ies) as soon

as possible since “dead” batteries are more likely to leak in a product.

11 Do not store this product, or the

battery(ies) provided with or identified for use with this product, in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage.

12 If your product uses rechargeable

battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the User Manual.

SAVE THESE INSTRUCTIONS

2 Environment and

safety

2.1 Safety information

This telephone is not designed for making emergency telephone calls when the power fails. An alternative should be made available for access to emergency calling.

2.2 Power requirements

This product requires an electrical supply of 120 volts, single phase alternating current, excluding IT installations defined in standard UL 60950.

2.3 Battery requirements

The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 600mAh (Hr11/45). IF THE INCORRECT TYPE OF BATTERIES ARE USED,A WARNING MESSAGE WILL BE DISPLAYED. Use only Philips Multi-Life 600mAh rechargeable NimH batteries. For servicing or replacement, you can purchase a suitable headset through service centre or retail shop.

2.4 Telephone connection

The voltage on the network is classified as TNV- 3 (Telecommunication Network Voltages, as defined in the standard UL

Environment and safety

Page 10

60950). Following a power cut, the call in progress is lost.

Caution

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

2.5 Environmental care

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling.

2.6 Precautions

• Do not allow the handset to come into contact with liquids or moisture.

• Do not open the handset, base station or charger.This could expose you to high voltages.

• Do not allow the charging contacts of the charger or the battery to come into contact with extraneous conductive materials.

• There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the USB socket and the phone line from the phone wall socket during a storm.

• Because the phone works by sending radio signals between the base unit and the handset, wearers of hearing

aids may experience interference in the form of a humming noise.

• We advise that this phone should not be used near intensive care medical equipment, nor by persons with pacemakers.

• Your phone can interfere with electrical equipment such as answering machines, TV and radio sets, clock radios and computers if placed too close. It is recommended that you position the base unit at least one meter from such appliances.

Caution

Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage the unit. Base adapter: Input: 100 V - 240 VAC 50/60 Hz Output: 6 VDC 500 mA Charger adapter: Input: 100 V - 240 VAC 50/60 Hz Output: 6 VDC 210 mA

Caution

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.

FCC CERTIFICATION NUMBER IS LOCATED ON THE CABINET BOTTOM The term “IC:” before the certification number signifies that Industry Canada technical specifications were met.This certification means that the equipment

Environment and safety

Page 11

meets certain radio communications and operational requ irements.

2.7 Equipment Approval Information

Your telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.

2.7.1 Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed

5. To be certain of the number of devices

you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the

applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

Notes

• This equipment may not be used on coin service provided by the telephone company.

• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.

• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.

• If your home has specially wired alarm equipment connected to the telephone line , ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

2.7.2 Rights of the Phone

Company

Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that

Environment and safety

Page 12

temporary discontinuance of service may be required.Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.

2.8 Interference Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).

• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult your dealer or an experienced radio / television technician for additional suggestions. Also, the Federal Communications

Environment and safety

Page 13

Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-00000345-4 when ordering copies. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2.9 Hearing Aid Compatibility (HAC)

This telephone system meets FCC and Industry Canada standards for Hearing Aid Compatibility.

2.10 FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For hand held operation, this phone has been tested and meets the FCC RF exposure guidelines. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

3Important

Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone.

NOTICE: This product meets the applicable Industry Canada technical specifications. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe systems, if present, are connected together. This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

Important

Page 14

NOTES: This equipment may not be used on coin service provided by the telephone company.

3.1 Power requirements

• This product requires an electrical

supply of 100-240 volts AC. In case of power failure, the communication can be lost.

• The Electrical network is classified as

hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

• The voltage on the network is

classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard UL 60950.

Warnin g

To avoid damage or malfunction:

• Do not allow the charging contacts or

the battery to come into contact with metal objects.

• Do not open it as you could be

exposed to high voltages.

• Do not allow the charger to come

into contact with liquids.

• Never use any other battery than the

one delivered with the product or recommended by Philips: risk of explosion.

• Always use the cables provided with

the product.

• Handsfree activation could suddenly

increase the volume in the earpiece to

a very high level: make sure the handset is not too close to your ear.

• This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

• Do not drop your phone or allow objects to fall on your phone.

• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

• Do not use the product in places where there are explosive hazards.

• Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

• Active mobile phones in the vicinity may cause interference.

About operating and storage temperatures:

• Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).

• Store in a place where temperature is always between -20 and 70º C (-4 to 158º F).

• Battery life may be shortened in low temperature conditions.

Important

Page 15

3.2 Electric, Magnetic and Electromagnetic Fields (“EMF”)

1. Philips Royal Electronics

manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.

2. One of Philips’ leading Business

Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

3. Philips is committed to develop,

produce and market products that cause no adverse health effects.

4. Philips confirms that if its products

are handled properly for their intended use, they are safe to use according to scientific evidence available today.

5. Philips plays an active role in the

development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

3.3 Recycle your batteries

Do not dispose your rechargeable batteries. Call the toll fee number 1-800822-8837 to get instructions on how to recycle your batteries.

4 The RBRC® seal

The RBRC® Seal on the nickel metal hydride battery indicates that Philips Royal Electronics is

participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste, which may be illegal in your area. Philips’s participation in RBRC easy for you to drop off the spent battery at local retailers participating in the RBRC product service centers. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and disposal bans/restrictions in your area. Philips’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC Rechargeable Battery Recycling Corporation.

program or at authorized Philips

is a registered trademark of

voluntarily

program provides a

makes it

The RBRC® seal

Page 16

4.1 Service Centers

US service center Philips Accessories & Computer Peripherals North America1881 Route 46 WestLedgewood, NJ 07852 Phone: (800) 233-8413 E-mail support: http://www.support.philips.com/support

The RBRC® seal

Page 17

The RBRC® seal

Page 18

5 Your phone

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

5.1 What’s in the box

Handset with belt clip Base Station with bracket Battery door

2 AAA rechargeable

batteries

User manual Guarantee

Note

In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.

Power supply Line cord

Do not return

leaflet

Quick Start

Guide

Yo u r ph o ne

Page 19

5.2 Overview of your phone

CDisplay

See section 5.3 for an overview of the

display icons.

D Select key o

Select the function displayed on the screen or go to the next lower level in a menu. Also used to confirm entries (for example when setting date and time).

EBack/Clear key c

Press to clear (delete) a character or number when making an entry. Long press to clear all.

When navigating menus, press to move

E F

to the previous higher menu level (Back

is displayed).

F Navigation keys n

In idle mode: Scroll up u to access the Call log and scroll down d to access the Phonebook. During a call: Scroll n to increase or decrease earpiece and speaker volume. Editing and entry: Move to the previous character u or next character d. In other modes: Scroll up u and down d a menu list or go to the previous or next record in the Phonebook, Redial list, or Call log.

AEvent LED

The event LED on your handset blinks when there is a new message recorded on your telephone answering machine. If you have subscribed to Caller Line Identification, the event LED also blinks when there is a new call, or a new voice mail message.

BEarpiece

G Talk key t

In idle mode: Make an external call or answer an incoming external or internal call. During a call: Activate the flash function. In other modes: Dial the selected number in the Phonebook, Redial list, or Call log.

H Hang-up/Exit key h

In idle mode: Long press (5 seconds) to switch off the handset.

When the handset is switched off: Long press (1 second) to switch it on.

Yo u r ph o ne

Page 20

During a call: Hang up a call. In other modes: Press to return to idle mode.

I Menu key m

In idle mode: Go to the main menu.

J Redial key r

Access the Redial list in idle mode.

K Loudspeaker key l

In idle mode: Turn on the loudspeaker and dial the number. Answer an incoming call using handsfree mode. During a call: Toggle the loudspeaker on/ off.

L Number keys

Use to dial numbers and write characters. With key 1, a long press dials your voice mail subscriber access number. With keys 3 to 9, a long press dials one of your direct memory access numbers.

M */Keypad lock & Format key *

In idle mode: Long press to lock/ unlock keypa d. Predialling or editing: Press to enter a “*”. Off hook: Long press to temporarily switch to tone (DTMF) dialling if using pulse. During call log display: Toggles area code and long distance display on/off.

N #/Ringer on/off & Pause key #

In idle mode: Long press to turn the ringer on/off. Dialling or editing: Long press to insert a pause (during predialling) and short press to insert a “#”. Editing: Short press to switch upper/ lower case.

I J K

M N

O P Q

OMute key s

When off hook: Deactivate/activate the microphone.

P Call transfer key & Intercom

key i

In idle mode: Initiate an internal call. During a call: Short press to hold the line and page another handset. Long press to set up a conference between an external call and two handsets.

Q Microphone R Belt clip S Loudspeaker (underneath the

belt clip)

War nin g

Handsfree activation can suddenly increase the volume of the earpiece to a very high level. Make sure the handset is not too close to your ear.

T Headset jack UBattery door

Yo u r ph o ne

Page 21

5.3 Display icons and Messages

Indicates that the battery is fully charged. This icon blinks during charge and when the battery is low. When the Icon is empty the battery is practically discharged.

Note

War nin g Ba tt

with a blinking batter y icon, batteries of the wrong type are installed in the handset. Replace with batteries of the correct type. Blinks when there is an incoming call. Steady On during a call. Blinks when there is new voice mail. Indicates new and missed calls in the call log records. Blinks when there are missed calls. Appears when the alarm clock is activated. Blinks when the alarm time comes. Appears when the loudspeaker is activated. Appears when the ringer is off.

Yo u r ph o ne

flashes together

Steady on when the answering machine is on. Blinks when messages have been received by the answering machine; blinks rapidly when an swe ring machine memory is full. Indicates that the handset is registered and within range of the base station. Icon blinks when the handset is out of range or is searching for a base.

Select/OKSelect appears when in menu

mode. Press the key directly below to move to the next menu level or to confirm a selection. OK appears to request confirmation of an operation. Press the key directly below to confirm. Indicates that more options are available in a scroll list, or that you can adjust the volume.

Page 22

Back/

Back appears when in menu

Clear

mode. Press the key directly below to return to the previous menu level. Clear appears when making an entry. Press the key directly below to clear (delete) a character or number when making an entry. Long press to clear all.

Yo u r ph o ne

Page 23

5.4 Overview of the base station

D E F G H

A Handset locator key a

Locate handset. Long press to start registration procedure.

BSpeaker C Message counter

Steady ON: shows the number of old messages. Blinking: Shows the number of new messages only. Two horizontal bars “--” blinking: Indicates that the answering machine memory is full. Also shows the base volume level when adjusting the volume.

DOn/Off key e

Short press to switch the answering machine on/off.

EVolume keys -+

Increase or decrease the speaker volume. There are 5 volume levels during playback. There are 5 volume levels plus OFF during idle mode and call screening.

Yo u r ph o ne

FErase key x

Short press to delete the current message during message playback. Long press (2 seconds) when in idle mode to delete all old messages. (New messages will not be deleted.)

G Previous key b

Go to previous message if pressed within 1 second of current message playback. Replay current message if pressed after 1 second of current message playback.

H Next key f

Skip to the next message during message playback.

I Play/Stop key p

Play phone messages (the first recorded will be played first). Voice prompts are played between messages and when all messages have been played. Stop message playback.

Page 24

6 Getting started

6.1 Connect the base station

1 Place the base station in a central

location near the telephone line socket and electricity socket.

2 Connect the line cord and the

power cable to their corresponding connectors at the back of the base station.

3 Connect the other end of the line

cord and power cable to their respective sockets

Note

The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.

War nin g

Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base.

War nin g

Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible. The power adaptor and telephone line cord have to be connected correctly, as incorrect connection could damage the unit. Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone.

6.2 Wall mounting the base

The base is designed to support wall mounting. To wall mount the base, follow the instructions below.

1 Remove the bracket from the back

of the base station by ➀ pressing the two latches on the inside of the

Getting started

Page 25

bracket and ➁ rotating the bracket outward.

5.20

83.00

17.00

2 Turn the bracket around.

3 Attach the bracket to the opposite

side of the base station.

4 Use the pedestal wall mounting to

plug your base station.

Getting started

5.20

6.3 Install your phone

Before using the handset, the batteries have to be installed and fully charged.

War nin g

When the batteries are inserted for the first time, the unit will not be able to start normally due to the low battery. You must charge the batteries on the base station before you can use the handset.

6.3.1 Install battery

War nin g

Always use AAA rechargeable batteries supplied with your unit. If alkaline batteries are used instead of rechargeable batteries, “Warning Batt” will show on the display and the battery icon will blink quickly.

1 Slide out the battery cover.

Page 26

2 Place the batteries in the correct

polarity as indicated and replace the cover.

hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time. The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink.

Tip

When you reach the range limit the conversation may become crackly. Move closer to the base.

6.3.2 Charge battery

Warnin g

The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor warns you by blinking the battery icon. If this occurs during a conversation, an alert tone sounds to inform you that the battery is low. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the icon starts blinking and any function in progress will not be saved.

1 Place the handset on the charging

cradle of the base station. A beep is emitted if the handset is placed correctly.

2 The battery icon on the display

blinks during charge.

The battery icon becomes steady when the handset is fully charged.

Note

Optimal battery life is reached after 3 cycles of complete charging (over 15

6.4 Remove/Attach belt clip

A belt clip allows you to carry your handset on your belt.

1 To remove the belt clip, simply pull

the clip away from the handset.

2 To attach the belt clip to your

handset, fit the tabs on the belt clip into the slots at the back of the handset and push into place.

Getting started

Page 27

6.5 Install optional headset

Your phone may be used with an optional headset (not included in the box). To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations.

Diameter: 2.5 mm

6.6 Using multipacks

If you have purchased a multipack you will have additional handsets, chargers, power adaptors and AAA rechargeable batteries.

1 Plug the chargers into a power

socket.

2 Install the batteries supplied into the

handsets.

3 Place the handsets on the chargers

to charge the batteries.

Getting started

Page 28

6.7 Menu structure

The SE650/655 has six menus as shown in the following table.

Menu Name Icon

1 Phonebook 2 Personal Settings 3 Clock and Alarm 4 Advanced Settings 5 Network Services 6 Answer Machine

Press the menu key m to enter menu mode. Use navigation keys n to navigate within the menus and all submenus.

Press o Select to enter the next lower menu level. Press c Back to go to the previous menu level.

The charts below show the menu trees of your phone.

Phonebook

Phonebook New Entry Enter Name: Enter Number:

List

Edit Entry

Select Melody

for selected entr y

Delete

Delete All Delete All?

Delete

Direct Memory Key list and status

Entry list displayed

Melody details List of melodies

Delete?

Edit

Getting started

Page 29

Per son a l S e tti ngs

Personal Set Handset Name Enter name

Handset Tones Ring Volume No bar (off)

One bar

…

Five bars

Progressive

Ring Tones Name of tones 1

…

Name of tones 15

Key Beep On

Off

Language List of languages

Wallpaper Wallpaper 1

Wallpaper 2

Wallpaper 3

Wallpaper off

Color Theme Color 1

…

Color 4

Contrast Level 1

…

Level 5

Backlight Time 20 Seconds

40 Seconds

60 Seconds

Auto Hang-up On

Off

Getting started

Page 30

Clock and Alarm

Clock & Alarm Set Date/Time Enter date & time

Set Format Time Format 12 Hours

24 Hours

Date Format DD/MM

MM/DD

Alarm Off

On Once

On Daily

Alarm Tone Melody 1

Melody 2

Melody 3

Getting started

Page 31

Advanced Settings

Advanced Set Easy Call Mode On Enter Number :

Off

Number Enter number

Conference

Off

Call Barring Enter PIN Mode On

Off

Number Number 1

…

Number 4

XHD Sound On

Off

Change PIN

Unregister

Reset Reset?

Area Code Enter number

Auto Prefix Detect Digit: Prefix

Flash Time Short

Long

Dial Mode Tone

Pulse

First Ring On

Off

On (by default)

(by default)

Getting started

Page 32

Network Services

Netw. Services Call Forward Activate Enter Number:

Deactivate

Change Code Activation

Deactivation Change Code

Call Fwd Busy Activate Enter Number :

Deactivate

Change Code Activation

Deactivation Change Code

Deactivate

Change Code Activation

Deactivation Change Code

Voicemail Call

Settings Enter Number

Voicemail 2 Call

Settings Enter Number

Info Call

Settings Enter Number

Info 2 Call

Settings Enter Number

Call Return Call

Settings Enter Number

Withhold ID Activate

Settings Enter Number

Call Fwd Unans

Cancel Call BK

Activate Enter Number:

Call

Prefix (enter code)

Suffix (enter code)

Prefix (enter code)

Suffix (enter code)

Prefix (enter code)

Suffix (enter code)

Getting started

Page 33

Answer Machine

Answer Machine Play Repeat

Delete

Delete All

Answer On/Off On

Off

Record OGM Answer & Rec. Play

Record Message

Delete

Answer Only Play

Record Message

Delete

Answer Mode Answer & Rec.

Answer Only

Settings Ring Delay 3 Rings

4 Rings

5 Rings

6 Rings

7 Rings

8 Rings

Economy

Remote Access Activate

HS Screening On

Off (by default)

Voice Language List of languages

Deactivate (by default)

Getting started

Page 34

7 Using your phone

7.1 Make a call

7.1.1 Predialling

1 Enter the number. (A maximum of

24 digits including * and # are allowed. Press c Clear to delete the last digit.) Or long press to delete all.

2 Press t.

• The call is initiated.

7.1.2 Direct dialling

1 Pick up the handset and press t.

(Or press l to start a call in speaker mode.)

2 Dial the number.

• The call is initiated.

7.1.3 Call from redial list

1 Press r in idle mode. 2 Scroll n to an entry in the redial

list.

3 Press t.

• The call is initiated.

Note

• In multihandset packs, each handset

has its own redial list.

• You can also press t first and then

press c Redial to enter the redial list. Then scroll n to select a number in the list and press o Select. The number is dialed automatically.

7.1.4 Call from the call log Note

• In multihandset packs, the call log is

shared between all handsets.

• You need to subscribe to Caller Line

Identification service to be able to see the caller’s number or name in the call log. See section 8.9.1 - “Access the Call log”.

1 Press u in idle mode, then scroll

n to an entry in the call list.

Note

If the list is empty, then “List Empty” is displayed.

2 Press t.

• The call is initiated.

7.1.5 Call from the phonebook

1 Press d in idle mode. 2 Scroll n to a phonebook entry. 3 Press t.

• The call is initiated.

Tip

Instead of scrolling n to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc.

7.1.6 Call from the phonebook

while already on the phone

1 While on the phone, press o

Option and then o Select to enter the phonebook name list.

2 Scroll n to a phonebook entry.

Using your phone

Page 35

3 Press o Select.

• The call is initiated.

7.1.7 Call using Direct Access Memory

Press a number key 3 to 9 for more than 2 seconds to dial a stored direct access memory number.

Note

• In multihandset packs, each handset

has its own direct access memories.

• See section 8.6.7 for instructions on

how to store, edit, and delete direct access memory numbers.

Tip

You can mute the ring tone of an incoming call before answering by pressing on c Silent.

7.2.1 Handsfree answering

Danger

Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

When the phone rings, press l.

• The handset loudspeaker is activated.

7.1.8 Enter a Dialing Pause

Long press # to enter a pause in the dialling sequence. The pause is indicated by a P.

7.2 Answer a call

Danger

When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.

When the phone rings, press the t key.

• The call is established.

Note

• Incoming call has priority over other

events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted.

Using your phone

7.3 End a call

To end a conversation, press h.

• The call ends.

Tip

When auto hang-up is on, you can simply place the handset back to its base station or charger to end the call. This feature is activated by default.

Note

The call duration (MM:SS) will be displayed on the handset screen for about 5 seconds.

Page 36

8 Use more of your

phone

8.1 Switch the handset off/on

To switch the handset off, press and hold h in idle mode for at least 5 seconds. To switch it on, press and hold h for at least one second.

8.2 Keypad lock/unlock

Press and hold * for 3 seconds to lock/ unlock the keypad in idle mode.

8.3 Text or number entry

When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times. For example, to enter the name “PA U L”:

1 Press 7 once: P 2 Press 2 once: PA 3 Press 8 twice: PAU 4 Press 5 three times: PAUL

The table below gives you the character assignment during text or number entry:

Keys Assigned characters

2 3 4 5

. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \ ^ ~ | SPACE 1 @ _ # = < > ( ) & € £ $ ¥ [ ] { } ¤ § ... a b c 2 à æ ä å d e f 3 è é Δ Φ g h i 4 ì Γ j k l 5 Λ

Keys Assigned characters

6 7 8 9

•Press c Clear to delete the last

• Short press # to shift between

•Long press # to insert a pause.

8.4 Call in progress

Some options are available to you during a call. The available options are :

8.4.1 Adjust earpiece or speaker

During a call, press n to select from

level 1 to level 5.

8.4.2 Mute/Unmute microphone

When the microphone is muted, your correspondent cannot hear you.

1 During a call, press s to turn off

2 Press s again to turn on the

8.4.3 Activate/Deactivate

Handsfree activation can suddenly increase the volume in the earpiece to a

m n o 6 ñ ö ò p q r s 7 ß Π Θ Σ t u v 8 ù ü w x y z 9 ø Ω Ξ Ψ

Tip

digit or character entered or long press to delete all.

lowercase and uppercase.

volume

the microphone.

microphone.

loudspeaker mode

Danger

Use more of your phone

Page 37

very high level. Make sure the handset is not too close to your ear. 1 During a call, press l to activate

the loudspeaker mode.

2 Press l again to return to

deactivate the loudspeaker mode.

8.5 Chain dialing

This feature allows you to dial an extension to a number already saved in the phonebook during a call.

1 Press t or l on the handset to

take the line. Then, press o Option and then o Select to enter the phonebook name list.

2 Scroll n to a phonebook entry. 3 Press o Select.

• The first part is dialed.

4 Enter the extension.

8.6 Using your Phonebook

Your phone can store up to 200 phonebook memories. Each phonebook entry can have a maximum of 24 digits for the phone number and 14 characters for the name. All names and numbers in the phonebook must be unique.

Note

If you have more than one handset, the phonebook can only be accessed by one user at a time.

8.6.1 Store a contact in the phonebook

1 Press m in idle mode.

Phonebook is highlighted; press o Select.

2 New Entry is highlighted; press

o Select.

3 Enter Name is displayed. Enter

the name of the contact (maximum 14 characters) and press o OK.

4 Enter Number is displayed. Enter

the number (maximum 24 digits) and press o OK.

• A validation tone is emitted.

Note

•Press c Clear to delete the last

digit or character entered or long press to delete all.

• To return to the previous menu, press

c Back.

Tip

You cannot store a new phonebook entry when the memory is full. In this case, you have to delete existing entries to make space for new entries.

8.6.2 Access phonebook

1 Press d in idle mode and scroll

n to browse the phonebook. (You

can also access the phonebook through the menu mode. m ➝ Phonebook ➝ List)

• The phonebook entries will be listed in alphabetical order.

2 To view the details, press o

View.

Use more of your phone

Page 38

Tip

3 Press t to dial the number. (Press

h to return to idle mode.)

8.6.3 Modify a phonebook entry

1 Press m in idle mode.

Phonebook is highlighted; press o Select.

2 Scroll n to Edit Entry and press

o Select.

3 Scroll n to select an entry to edit. 4 Press o Select to display the

name.

5 Press c Clear to erase the

letters one by one.

6 Edit the name and press o OK to

confirm.

7 Edit the number and press o OK

to confirm.

• A validation tone is emitted.

Note

While editing, press c Clear to delete the last digit or character entered or long press to delete all.

8.6.4 Select phonebook melody

With this function you can personalize the melody played when someone in the phonebook calls you.

Note

You need to subscribe to Caller Line Identification service to be able to benefit from this feature.

1 Press m in idle mode.

Phonebook is highlighted; press o Select.

2 Scroll n to Select Melody and

press o Select.

3 Scroll n to the entry you want to

select a melody for, then press o View.

4 The screen shows the melody

currently selected for that entry. Press o Change to change the melody.

5 Scroll n the list of melodies.

(There are 15 melodies plus No Melody to choose from. The

melodies play as you scroll through them.)

6 Press o Select to select the

melody you prefer.

• A validation tone is emitted and the screen returns to the

Phonebook menu.

Note

When first ring detection is set On, a normal tone sounds first, then it changes to the personalized phonebook melody. When it is set Off, the personalized phonebook melody plays from the start. See Section 10.13 for how to set first ring detection On or Off.

Use more of your phone

Page 39

8.6.5 Delete a phonebook entry

1 Press m in idle mode.

Phonebook is highlighted; press o Select.

2 Scroll n to Delete and press o

Select.

3 Scroll n to select an entry to

delete and press o Select.

4 Delete? is displayed on the screen.

Press o OK to confirm deletion.

• A validation tone is emitted.

Note

Press c Back to discard the deletion. The screen returns to the phonebook list.

8.6.6 Delete all phonebook entries

1 Press m in idle mode.

Phonebook is highlighted; press o Select.

2 Scroll n to Delete All and press

o Select.

3 Delete All? is displayed on the

screen. Press o OK to confirm deletion.

• A validation tone is emitted.

8.6.7 Direct Access Memory

There are 7 direct access memories (Keys 3 to 9) included in the phonebook memory. A long press on the keys in idle mode will automatically dial the stored phone number.

Note

Key 1 and key 2 are reserved for use with Voicemail 1 and Voicemail 2 in the network services menu. If you subscribe

to these services, this allows you to dial your voice mail access numbers using key 1 or key 2.

8.6.7.1 Add/Edit Direct Access

1 Press m in idle mode.

2 Scroll n to Direct Memory and

3 Scroll n to the key you wish to

4 Scroll n to Edit and press o

6 Press o OK to confirm.

Each handset has its own direct access memories.

Memory

Phonebook is highlighted; press

o Select.

press o Select.

• The current number stored in the direct access memory location will be displayed. If no number is stored, No number will be displayed.

edit (Key 3 to Ke y 9 ) and press

o Menu.

Select.

The Phonebook list will be displayed. Scroll

to the Phonebook entry you wish to store in the selected direct access memory number and press

o Select

• A validation tone is emitted and

the screen returns to the previous menu.

Note

Use more of your phone

Page 40

8.6.7.2 Delete Direct Access Memory

1 Press m in idle mode.

Phonebook is highlighted; press o Select.

2 Scroll n to Direct Memory and

press o Select.

3 Scroll n to the key you wish to

delete the memor y from and press o Menu.

4 Scroll n to Delete and press o

Select.

• A validation tone is emitted and the screen returns to the previous menu.

8.7 Using the Redial list

The redial list stores the last 10 numbers dialed. A maximum of 32 digits can be displayed for each entry.

8.7.1 Access Redial list

1 Press r to go to the redial list and

scroll n to browse the redial list.

• The last number dialed will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead.

2 To open the redial list options, press

o Menu. Note

Press c Back to return to the previous menu.

8.7.2 View redial number details

1 Press r in idle mode, scroll n to

select an entr y and press o Menu.

2 View is highlighted on the screen;

press o Select to display information about the number dialed.

3 Press o Next to display further

information. Afterward, you can press o Prev. to return to the former screen. After viewing, press c Back to return to previous menu levels.

8.7.3 Save a redial number into the phonebook

1 Press r in idle mode, scroll n to

select an entr y and press o Menu.

2 View is highlighted on the screen.

Scroll n to Save Number and press o Select.

3 Enter Name is displayed. Enter

the name of the contact (maximum 14 characters) and press o OK.

4 Enter Number is displayed and

the selected number from the redial list appears in the number field. At this time you can edit the number if you wish to.

5 Press o OK. The screen returns

to the redial list.

Note

Press c Clear to delete the last digit or character entered. Long press c Clear to clear the entire entry.

Use more of your phone

Page 41

8.7.4 Delete a redial number

1 Press r in idle mode, scroll n to

select an entry and press o Menu.

2 Scroll n to Delete and press o

Select.

3 Delete? is displayed on the screen. 4 Press o OK to confirm deletion.

• A validation tone is emitted.

Note

Press c Back to discard the deletion. The screen returns to the previous menu.

8.7.5 Delete all redial numbers

1 Press r in idle mode, and press

o Menu.

2 Scroll n to Delete All and press

o Select.

3 Delete All? is displayed on the

screen.

4 Press o OK to confirm deletion.

• A validation tone is emitted.

8.8 Call waiting

If you have subscribed to Call Waiting services, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service. To answer the second call, press t.

8.9 Using the Call log

The call log stores the last 50 external calls and any new voice mail received. In idle mode, the icon flashes on the display for new and unanswered calls. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed. During CLI display, you can press * to toggle area code and long distance code display on/off.

Note

If the identity of the caller is witheld, External Call is displayed in the call log along with the date and time of the call. If you have not subscribed to Caller Line Identification service, there will not be any caller information displayed in the call log.

8.9.1 Access the Call log

1 Press u in idle mode, press o

Select to select Call List, and scroll n to browse the call log.

• The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list. If the call is unviewed and unanswered, New appears on the display. After you view the message, New disappears.

•Press t to dial out the number of the selected call log entry.

2 To view the call details, press o

Menu and then press o Select.

Use more of your phone

Page 42

The display shows the caller information.

• Press c Back at any time to

return to the previous menu.

8.9.1.1 To choose the format for call log display

You must choose the correct format to dial the area code and number of the call log record chosen. The original incoming number from the call log will appear as a 7, 10 or 11-digit number. If it is a long distance call, the prefix digit 1 will automatically appear in front of the 10digit local calls.

1 When viewing the call log, press *

to change the format of the call log display as it should be dialed from your location. For example, if the call log entry appears as “234-5678900”:

• Press * once t o display “1-234-

567-8900”

• Press * twice to display “567-

8900”

• Press * 3 times to display “1-

567-8900”

• Press * 4 times to display

“234-567-8900” again.

2 To dial the current displayed

number, press t key.

• The call is initiated.

Note

You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log (see section 8.9.1 - “Access the Call log”).

When you store an incoming number in the phonebook, the digits of the number will be saved exactly as they appear on the screen. If the first 3 digits of the incoming number corresponds to the local area code set in your phone, they will be filtered automatically when you press the t or l key to dial. To change the local area code, see section 10.9 - “Set Area Code”.

8.9.2 Save call list entry into the phonebook

1 Press u in idle mode, press o

Select to select Call List, then scroll n to select an entry and press o Menu.

2 Scroll n to Save Number and

press o Select.

3 Enter Name is displayed on the

screen. Enter the name of the contact (maximum 14 characters) and press o OK.

4 Enter Number is displayed and

the selected number from the call list appears in the number field. At this time you can edit the number if you wish to.

5 Press o OK.

• A confirmation tone sounds and the screen returns to call log.

Note

Press c Clear to delete the last digit or character entered or long press to delete all.

Use more of your phone

Page 43

8.9.3 Delete a call list entry

1 Press u in idle mode, press o

Select to select Call List, then scroll n to select an entry and select o Menu.

2 Scroll n to Delete and press o

Select.

3 Delete? is displayed on the screen. 4 Press o OK to confirm deletion.

• A validation tone is emitted, the call list entry is deleted, and the display goes to the next entry in the call list.

Note

Press c Back to discard the deletion. The screen returns to the Call List menu.

8.9.4 Delete all call list entries

1 Press u in idle mode, press o

Select to select Call List, and then press o Menu.

2 Scroll n to Delete All and press

o Select.

3 Delete All? is displayed on the

screen. Press o OK to confirm deletion.

• A validation tone is emitted. The display shows List Empty for 2 seconds and returns to the idle mode.

8.10 Using the Intercom

Warnin g

Intercom and call transfer is only possible when you have at least 2 handsets registered to the same base station.

It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.

8.10.1 Intercom another handset Note

If the handset does not belong to SE650/ 655 range, this function may not be avail abl e.

1 Press i in idle mode.

• Intercom is established

immediately if there are only 2 registered handsets.

2 If there are more than 2 registered

handsets, scroll n to select the handset to call and press o OK.

• Once the intercom call is

initiated the icon is displayed on the handset.

3 Press t on the called handset.

• The intercom is established.

Note

Pressing h on any handset will exit intercom mode and return other handsets to idle mode. If an external call arrives during intercom mode and you want to accept this call, you must first exit intercom mode.

8.10.2 Transfer an external call to

another handset

1 During the call, press i to put the

external call on hold (the caller can no longer hear you).

• The display shows the numbers

of the handsets registered to the base.

Use more of your phone

Page 44

2 Scroll n to the handset number

you wish to transfer your external call to and press o Select.

3 Press t on the called handset to

answer the internal call, where both internal callers can talk.

• Intercom is established.

4 Press h on the first handset to

transfer the external call to the called handset.

• The external call is transferred.

Note

If there is no answer from the called handset, press i to resume the external call.

8.10.3 Answer an external call during intercom

1 During intercom, a new call tone is

emitted when there is an incoming external call.

2 Press h to exit intercom mode. 3 Press t to pick up the external

call.

8.10.4 Switch between an internal and external call

During the call, press i to switch between an internal or external call.

8.10.5 Establish a three-party conference call

The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties

can share the conversation and no network subscription is required.

1 During the call, press i to put the

external call on hold (the caller can no longer hear you).

• The display shows the numbers of the handsets registered to the base.

2 Scroll n to the number of the

handset you wish to establish the conference call with and press o Select.

3 Press t on the called handset to

answer the internal call, where both internal callers can talk.

• Intercom is established.

4 Press c Conf. or long press i

on the first handset to start the three-party conference.

• Conference will be displayed on the screen once the conference call is established.

8.11 Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

1 Press a on the base station.

• All the registered handsets start to ring.

• Once a handset is found, press c Silent on a handset to stop its ringing.

2 Press a again to end the paging.

Note

If there are no key presses within 30 seconds, the handset will automatically return to idle mode.

Use more of your phone

Page 45

8.12 Clock and Alarm settings

This feature allows you to set the date, time and alarm settings for your phone.

8.12.1 Set Date and Time

1 Press m in idle mode, scroll n to

Clock & Alarm, and press o Select.

2 Set Date/Time is highlighted.

Press o Select.

3 The last stored date and time are

displayed. Enter the current time and current date (HH:MM DD/MM/ YY). Press u to move the cursor left, or press d to move i t ri ght. If using the 12 hour format, just after setting the minutes, use * to switch between AM and PM.

4 Press o OK.

• A validation tone is emitted and the screen returns to the idle mode.

Note

You can change the format as shown in the next section.

8.12.2 Set Time and Date Format

8.12.2.1 Set Time Format

1 Press m in idle mode, scroll n to

Clock & Alarm, and press o Select.

2 Scroll n to Set Format and press

o Select.

3 Time Format is highlighted in the

display. Press o Select, then

scroll n to select 12hours or 24hours.

4 Press o Select to select the

option.

• A validation tone is emitted and

the screen returns to the Set

Format menu.

8.12.2.2 Set Date Format

1 Press m in idle mode, scroll n to

Clock & Alarm, and press o Select.

2 Scroll n to Set Format and press

o Select.

3 Scroll n to Date Format and

press o Select.

4 Scroll n to select DD/MM or

MM/DD and press o Select to

select the option.

• A validation tone is emitted and

the screen returns to the Set

Format menu.

8.12.3 Set Alarm

Press m in idle mode, scroll n to

Clock & Alarm Select

2 Scroll n to Alarm and press o

Select.

3 Scroll

4 If you select On Once or On

Daily and press

Daily, enter the time (HH-MM) for

the alarm. (If using the 12 hour format, you can switch between AM and PM by pressing OK to confirm.

, and press o

to Off, On Once, or On

Select.

.) Press o

Use more of your phone

Page 46

• A validation tone is emitted and the screen returns to the Alarm menu. And the alarm icon is displayed.

• If you select Off, a validation tone is emitted and the screen returns to the Clock & Alarm menu.

Note

The alarm tone and alarm icon will sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset.

8.12.4 Set Alarm Tone

1 Press

2 Scroll

3 Scroll

in idle mode, scroll n to

Clock & Alarm, and press Select.

to Alarm Tone and press

Select.

to select the tone. (Three tones are available. The tones sound as you scroll.) Press confirm your selection.

• A validation tone is emitted and

the screen returns to the Clock & Alarm menu.

Select to

9 Personal settings

9.1 Change the Handset Name

You can name the handset and display the handset name in idle mode. The default handset name of your handset is Philips.

1 Press m in idle mode, scroll n to

Pers ona l S e t and press o Select.

2 Handset Name is highlighted;

press o Select.

3 The last stored name is displayed.

Press c Clear to delete the characters one by one or a long press to delete all.

4 Enter the new name and press o

OK to confirm.

• A validation tone is emitted and the screen returns to the

Per son a l Se t menu.

9.2 Handset Tones

9.2.1 Set the Ring Volume

Danger

When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.

In multihandset packs, you can set the ring volume independently on each registered handset. There are 5 ringer volume levels plus progressive and off. The default is level 3.

1 Press m in idle mode, scroll n to

Pers ona l S e t, and press o Select.

2 Scroll n to Handset Tones and

press o Select. Ring Volume is highlighted; press o Select.

Personal settings

Page 47

3 Scroll n to your de sired volu me

level. The ring tone sounds at each level.

4 Press o OK to confirm.

• A validation tone is emitted and the screen returns to the

Handset Tones menu.

Note

If ring volume is set to off, the icon will be displayed on the screen. If ring volume is set to progressive, the ringer will start at level 1 and go up one level volume every ring.

9.2.2 Set the Ring Tones

There are 15 ring tones available on your handset.

1 Press m in idle mode, scroll n to

Per son a l S e t, and press o Select.

2 Scroll n to Handset Tones and

press o Select. Then scroll n to Ring Tones and press o Select.

3 Scroll n to your desired melody.

The melodies will play as you scroll them.

4 Press o Select to set the ring

tone.

• A validation tone is emitted and the screen returns to the Handset Tones menu.

1 Press m in idle mode, scroll n to

Pers ona l S e t, and press o Select.

2 Scroll n to Handset Tones and

press o Select. Then scroll n to Key Beep and press o Select.

3 Scroll n to select On or Off and

press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Handset Tones menu.

9.3 Change the Display Language

Your handset can support different display languages.

1 Press m in idle mode, scroll n to

Pers ona l S e t, and press o Select.

2 Scroll n to Language and press

o Select.

3 Scroll n to your desired language

and press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Per son a l Se t menu.

Note

Once the display language is set, the option menus on the handset will immediately switch to display in the selected language.

9.2.3 Activate/Deactivate Key Beep

A single beep tone is emitted when a key is pressed. You can enable or disable the key beep.

Personal settings

9.4 Select the Display Wallpaper

There are 3 wallpaper images available on your handset as well as an option to set it off.

Page 48

1 Press m in idle mode, scroll n to

Per son a l S e t, and press o Select.

2 Scroll n to Wallpaper and press

o Select.

3 Scroll n to your desired wallpaper.

The image on the display will change as you scroll.

4 Press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Per son a l S e t menu.

9.5 Select the Color Theme

There are 4 color themes available on your handset.

1 Press m in idle mode, scroll n to

Per son a l S e t, and press o Select.

2 Scroll n to Color Theme and

press o Select.

3 Scroll n to your desired color

theme. The color theme used on the display will change as you scroll.

4 Press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Per son a l S e t menu.

9.6 Set the Display Contrast

You can change the contrast of the text on the display. There are 5 contrast levels available on your handset. The default is level 3.

1 Press m in idle mode, scroll n to

Per son a l S e t, and press o Select.

2 Scroll n to Contrast and press

o Select.

3 Scroll n to the desired display

contrast, and press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Per son a l Se t menu.

9.7 Set the Backlight Time

You can change the backlight timing for the display. There are 3 options available

- 20, 40, or 60 seconds.

1 Press m in idle mode, scroll n to

Pers ona l S e t, and press o Select.

2 Scroll n to Backlight Time and

press o Select.

3 Scroll n to the desired backlight

time, and press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Per son a l Se t menu.

9.8 Deactivate/Activate Auto Hang-Up

If auto hang-up is set to On, it will automatically release the line when the phone is put back on the cradle. If auto Hang-up is set to Off, putting the handset back on the cradle while in talk mode will switch the handset to hands free talk mode. This allows you to charge the handset during calls. The default setting for auto hang up is On.

Personal settings

Page 49

1 Press m in idle mode, scroll n to

Per son a l S e t, and press o Select.

2 Scroll n to Auto Hang-up and

press o Select.

3 Scroll n to On or Off and press

o Select to confirm.

• A validation tone is emitted and the screen returns to the Per son a l S e t menu.

10 Advanced settings

10.1 Easy Call

When activated, this feature allows you to dial a preset number by pressing any key on the handset (except c Cancel). This feature is useful for fast access to emergency services.

10.1.1 Set Easy Call to On or Off

Follow this procedure to switch Easy Call on. To switch Easy Call off, see the Note at the end of this section.

1 Press m in idle mode, scroll n to

Advanced Set and press o Select.

2 Easy Call is highlighted. Press o

Select to enter the Easy Call menu.

3 Mode is highlighted in the display.

Press o Select again to select Mode, then scroll n to On.

4 Press o Select to confirm the

selection.

• If an Easy Call number has not been set, you will be prompted to input the Easy Call number.

• If an Easy call number has already been set, the screen returns to idle mode. If you want to edit the number, press c Cancel and scroll to Number and press o Select, edit the new number and press o OK.

Note When you switch Easy Call on, Easy Call On will be displayed on your screen

in standby mode. You can still answer any incoming call as normal. To switch Easy Call off from idle mode, press c Cancel. Mode is highlighted in the display. Press o Select again to select Mode, and then scroll n to Off. Press o Select to confirm.

10.1.2 Set Easy Call number

1 Press m in idle mode, scroll n to

Advanced Set and press o

Select.

2 Easy Call is highlighted in the

display. Press o Select to enter

the Easy Call menu.

3 Mode is highlighted in the display.

Scroll n to Number and press

o Select.

4 Input the Easy Call number. 5 Press o OK to confirm.

• A validation tone is emitted and

the screen returns to the Easy Call menu.

Advanced settings

Page 50

10.2 Auto Conference

If activated, this feature allows another handset to join a conversation with an external call by simply pressing t. The default setting is On.

1 Press m in idle mode, scroll n to

Advanced Set and press o Select.

2 Scroll n to Conference and press

o Select.

3 Scroll n to select On or Off and

press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Advanced Set menu.

10.3 Call Barring

If activated, this function prevents dialing out to numbers beginning with designated barring numbers. This is useful for preventing outgoing long distance calls or calls to specific prefixes. You can store up to four numbers, each with up to 4 digits.

Note If you switch call barring on, Call Barr On is displayed on the screen in idle

mode. By default call barring is off.

10.3.1 Set Call Barring Mode By default, Call Barring is OFF.

1 Press m in idle mode, scroll n to

Advanced Set and press o

Select.

2 Scroll n to Call Barring and

press o Select.

3 Enter the PIN number.

• If you enter and incorrect PIN number, an error tone will sound and “Wrong PIN!” will be displayed. Then, the display will return to idle screen.

4 Mode is highlighted in the display.

Press o Select.

5 Scroll n to select On or Off and

press o Select to confirm.

• If a Call Barring number has not been set, you will be prompted to input a Call Barring number.

Note

To switch Call Barring mode off again from idle mode, press c Cancel and enter the PIN number. Mode is highlighted in the display. Press o Select to select Mode, then scroll n to Off and press o Select.

10.3.2 Set a Call Barring number

1 Press m in idle mode, scroll n to

Advanced Set and press o Select.

2 Scroll n to Call Barring and

press o Select.

3 Enter the PIN number. 4 Mode is highlighted in the display.

Scroll d to Number and press o Select.

5 Scroll n to select a call barring

number location, and press o

Select to confirm.

6 Input the call barring number (up to

4 digits) and press o OK.

• A validation tone is emitted and the screen returns to the Call Barring menu.

Advanced settings

Page 51

10.4 XHD Sound

XHD (extra high definition) Sound can increase voice quality when On. The default setting is On. To turn it off:

1 Press m in idle mode, scroll n to

Advanced Set and press o Select.

2 Scroll n to XHD Sound and

press o Select.

3 Scroll n to select On or Off and

press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Advanced Set menu.

10.5 Change PIN

The PIN is used for setting call barring numbers and registration/unregistration of handsets. The default PIN number is

0000. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

Note

The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

1 Press m in idle mode, scroll n to

Advanced Set and press o Select.

2 Scroll n to Change PIN and

press o Select.

3 Old PIN: will be displayed. Enter

the current PIN and press o OK.

• The PIN entered will be shown as asterisks (*) on the screen.

• If you enter an incorrect PIN number, an error tone will sound and “Wrong PIN!” will be displayed. Then, you will be prompted to enter the current PIN again.

4 New PIN: will be displayed. Enter

the new PIN and press o OK.

5 Confirm PIN: will be displayed.

Enter the new PIN again and press o OK to confirm PIN change.

• A validation tone is emitted, Saved! is displayed and the screen returns to the Advanced

Set menu.

Tip

If you forget your PIN, you will need to reset your phone to its default settings. For more details, see section 10.8 “Reset Unit.”

10.6 Registration

If you wish to register an additional handset or if you have inad vert ently unregistered your phone’s handset and want to re-register it, follow the procedure described below. This is the procedure for registering SE65 handsets. Procedures may vary for other types of handsets. In this case, please refer to the manufacturer of the handset. Additional handsets must be registered to the base station before you can use them. Up to 8 handsets can be registered to one base station. The PIN is required before you can register or unregister handsets.

Advanced settings

Page 52

Note

By default, the PIN is 0000.

1 On the base station, press and hold

a for 3 seconds. A beep sounds to indicate that the base is ready to accept registration.

Note

If no action is taken on the handset within 90 seconds, the registration procedure will be aborted. If this happens, repeat from Step 1.

On the handset, press m, scroll n to

Advanced Set

Select

4 Enter the PIN when prompted and

10.6.1 Easy registration

1 Insert the unregistered handset in

2 Registering… is displayed on the

Scroll n to

Select

press

o OK to confirm.

Registering… is displayed on the screen.

• Upon successful registration, a validation tone is emitted and the handset number (1 to 8) will be assigned by the base automatically.

the base station to automatically begin registration.

screen.

• Upon successful registration, a validation tone is emitted and the handset number (1 to 8) will be assigned by the base automatically.

and press o

Note

The easy registration is possible only when PIN has not been changed and is still the default PIN 0000.

10.7 Unregister

1 Press m in idle mode, scroll n to

Advanced Set and press Select

2 Scroll

3 Enter the PIN when prompted and

4 Scroll n to select the handset

You can only use a SE650/655 handset to unregister a handset that does not belong to the SE650/655 range.

10.8 Reset Unit

You can reset your phone to its default settings with this feature. (see 10.14 “Default Settings”)

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.

You may have to configure your phone once again.

to Unregister and press

o Select.

press

o OK to confirm.

number to unregister and press o Select. Press o OK to confirm.

• A validation tone is emitted to indicate successful unregistration.

Note

Caution

Note

Advanced settings

Page 53

1 Press m in idle mode, scroll n to

Advanced Set and press Select

2 Scroll n to Reset and press

3 Reset? is displayed on the screen.

Select

Press

o OK to confirm.

• A validation tone is emitted.

• The unit is reset to its default settings. (See section 10.14 below.)

1 Press m in idle mode, scroll n to

Advanced Set and press o Select.

2 Scroll n to Area Code and press

o Select.

3 Area Code will appear in the

display. Input your area code and press o OK to confirm.

• A validation tone is emitted and the screen returns to the

Advanced Set menu.

10.9 Set Area Code

This feature is useful when you have subscribed to Caller Line Identification service. It allows you to set an area code in your phone. Once the local area code is set, the phone automatically filters the area code for all incoming calls, by removing the area code for local calls and retaining the area code for calls from other areas. If it is a local call, then only the phone number of the caller is displayed during an incoming call or when you call the number from the call log. If it is a long distance call, then both the area code and phone number will be displayed in a proper format to be dialed out directly from the call log, or saved into the phonebook.

Note

You can enter 3 digits for the area code. You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. See 7.1.4 “Call from the call log” for details.

Advanced settings

10.10 Set Auto Prefix

This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” - section 7.1.1). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialing. You can enter up to a maximum of 5 digits for the detect string and 10 digits for the auto prefix number.

1 Press m in idle mode, scroll n to

Advanced Set and press Select

2 Scroll n to Auto Prefix and press

3 Detect Digit: is displayed on the

4 Prefix: is displayed on the screen.

o Select

screen. Enter a detect string number (maximum 5 digits) and press

Enter the prefix number (maximum 10 digits) and press confirm.

o OK to confirm.

o OK to

Page 54

• A validation tone is emitted and the screen returns to the

Advanced Set menu.

Note

If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed. For numbers starting with *, # or P, the prefix number will not be added to the predial number after t is pressed.

10.11 Change Flash time

Flash time is the time delay by which the line will be disconnected after you press the t key. It can be set to short or long. The default value is Long.

1 Press m in idle mode, scroll n to

Advanced Set, and press o Select.

2 Scroll n to Flash Time and press

o Select.

3 Scroll n to Short or Long and

press o Select to confirm.

• A validation tone is emitted and the screen returns to the

Advanced Set menu.

Note

The use of your SE650/655 cannot be guaranteed on all PABX.

10.12 Change the Dial Mode

The default value for dial mode that is preset in your handset should be the best suited for your subscribed network and

therefore you should not need to change it.

1 Press m in idle mode, scroll n to

Advanced Set, and press Select

2 Scroll n to Dial Mode and press

3 Scroll n to To n e or Pulse and

10.13 Set First Ring Detection

First ring detection allows the phone to ring upon reception of the first ring signal. It is recommended that you set first ring detection Off if you subscribe to caller line identification service. (When using personalized phonebook melodies, this will prevent a normal ring tone from sounding before a melody starts playing.) If you do not subscribe to caller line identification service, it is recommended that you set first ring detection On. (See Section 8.6.4.)

1 Press m in idle mode, scroll n to

2 Scroll n to First Ring and press

3 Scroll n to On or Off and press

o Select

press

• A validation tone is emitted and

Advanced Set, and press Select

o Select

• A validation tone is emitted and

o Select

the screen returns to the Advanced Set menu.

to confirm.

the screen returns to the Advanced Set menu.

to confirm.

Advanced settings

Page 55

Note

The default setting for first ring detection is On. The setting automatically switches to Off when you receive a call containing caller line identification. However, this occurs only if you do not first manually change the setting. (It does not change automatically if you manually change the first ring setting even once .)

10.14 Default Settings Parameter Default Value

Ring Volume Level 3 Ring Tone Ring 1 Earpiece Vo lu me Speaker Vo lu me Key Beep On Display Language Wallpaper Wallpaper 1 Color Theme Display Contrast Backlight Time Auto Hang-UpOn

Handset Name Time/Date Format Time/Date 00:00 01/01/2008 Set Alarm Off Alarm Tone Bell 2

Level 3

English

Color 1

Level 3

20 Seconds

Philips

MM/DD 12Hours

Parameter Default Value

Dial Mode Tone Flash Time Long PIN Code 0000 Call Barring Off Call Barring Number XHD Sound On Easy Call Off Easy Call Number Auto Prefix Cleared Set First Ring On Phonebook Memory

Redial Memory CLI Memory Cleared Network Service Auto Conference

Cleared

After a reset, phonebook is maintained as it was just before the reset Cleared

Empty (no preset numbers) On

11 Network Service

The network service functions provide a convenient way for you to access some network provider services. Subscriptions are required in order to benefit from these services. Contact your network provider for details. Depending on your subscribed network, some of the services and menus described in this

Network Service

Page 56

chapter may not be available in your SE650/655.

Note The Call Forward, Call Forward when Busy, and Call Forward when Unanswered functions require

activation codes (prefix and suffix) and a deactivation code. You must get these codes from your service provider.

11.1 Call Forward

You can use Call Forward to forward incoming calls to another number. This can be useful if you want calls to go to another number overnight or when traveling. You can activate or deactivate Call Forward as follows:

1 Press m in idle mode, scroll n to

Netw. Services, and press o

Select.

2 Scroll n to Call Forward and

press o Select.

3 To a c ti va te Call Forward, scroll

n to Activate and press o

Select. To deactivate Call

Forward, scroll to Deactivate

and press o Select.

4 If you selected Activate, you will

be prompted to enter the number

for call forward. Enter the number

(maximum 24 digits) and press o

OK.

5 The Call forward codes and the

number are dialed. Press h and

return to idle mode.

11.1.1 Change Call Forward Activation Codes

There are two parts to the Call Forward activation code - a prefix and a suffix.

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Forward and

press o Select.

3 Scroll n to Change Code and

press o Select.

4 Scroll n to Activation and press

o Select.

5 You are now at the Activation

screen. Scroll n to Prefix or Suffix, then press o Select.

6 You will be prompted to enter the

prefix/suffix code. Enter the number (maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Activation screen.

Note

Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry.

7 Repeat from step 5 until you are

finished inputting both the prefix and suffix codes.

11.1.2 Change Call Forward Deactivation Code

You must get the deactivation code from your service provider.

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

Network Service

Page 57

2 Scroll n to Call Forward and

press o Select.

3 Scroll n to Change Code and

press o Select.

4 Scroll n to Deactivation and

press o Select.

5 Enter the deactivation code

(maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Call Forward screen.

Note

Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry.

11.2 Call Forward when Busy

This function will forward incoming calls to another number if the line is busy. You can activate or deactivate Call Forward when Busy as follows:

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Fwd Busy and

press o Select.

3 To a c ti va te Call Fwd Busy, scroll

n to Activate and press o Select. To deactivate Call Fwd Busy, scroll to Deactivate and press o Select.

4 If you selected Activate, you will

be prompted to enter the number for call forward when busy. Enter the number (maximum 24 digits) and press o OK.

5 The Call forward when busy codes

and the number are dialed. Press h and return to idle mode.

11.2.1 Change Call Forward when Busy Activation Codes

There are two parts to the Call Forward when Busy activation code - a prefix and a suffix.

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Fwd Busy and

press o Select.

3 Scroll n to Change Code and

press o Select.

4 Scroll n to Activation and press

o Select.

5 You are now at the Activation

screen. Scroll n to Prefix or Suffix, then press o Select.

6 You will be prompted to enter the

prefix/suffix code. Enter the number (maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Activation screen.

Note

Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry.

7 Repeat from step 5 until you are

finished inputting both the prefix and suffix codes.

Network Service

Page 58

11.2.2 Change Call Forward when Busy Deactivation Code

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Fwd Busy and

press o Select.

3 Scroll n to Change Code and

press o Select.

4 Scroll n to Deactivation and

press o Select.

5 Enter the deactivation code

(maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Call Fwd Busy screen.

Note

Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry.

11.3 Call Forward when Unanswered

This function will forward unanswered calls to another number. You can activate or deactivate Call Forward when Unanswered as follows:

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Fwd Unans and

press o Select.

3 To activate Call Fwd Unans, scroll

n to Activate and press o Select. To deactivate Call Fwd Unans, scroll to Deactivate and press o Select.

4 If you selected Activate, you will

be prompted to enter the number for call forward when unanswered. Enter the number (maximum 24 digits) and press o OK.

5 The Call forward when unanswered

codes and the number are dialed. Press h and return to idle mode.

11.3.1 Change Call Forward when Unanswered Activation Codes

There are two parts to the Call Forward when Unanswered activation code - a prefix and a suffix.

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Fwd Unans and

press o Select.

3 Scroll n to Change Code and

press o Select.

4 Scroll n to Activation and press

o Select.

5 You are now at the Activation

screen. Scroll n to Prefix or Suffix, then press o Select.

6 You will be prompted to enter the

prefix/suffix code. Enter the number (maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Activation screen.

Note

Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry.

Network Service

Page 59

7 Repeat from step 5 until you are

finished inputting both the prefix and suffix codes.

11.3.2 Change Call Forward when Unanswered Deactivation Code

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Fwd Unans and

press o Select.

3 Scroll n to Change Code and

press o Select.

4 Scroll n to Deactivation and

press o Select.

5 Enter the deactivation code

(maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Call Fwd Unans screen.

Note

Press c Clear to delete entered numbers. Long press c Clear to clear the entire entry.

11.4 Voice Mail

Use this function to access your voice mail account.

11.4.1 Access Voice Mail

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Vo ic em ai l and press

o Select.

3 You are now at the Vo ic em ai l

menu and Call is highlighted. Press o Select to connect to the voice mail account number.

Note

You can also access your voice mail number by long-pressing 1.

11.4.2 Set Voice Mail Number

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Vo ic em ai l and press

o Select.

3 Scroll n to Settings and press

o Select.

4 Enter the voice mail account

number (maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Voi ce mail screen.

11.5 Voice Mail 2

Use this function to access an alternate voice mail account. Access and setting procedure is same as for Voice Mail.

Note

You can also access your voice mail number by long-pressing 2.

11.6 Information Service

Use this function to access your information service account.

Network Service

Page 60

11.6.1 Access Info Service

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Info and press o

Select.

You are now at the

Call

is highlighted. Press o to connect to the information service account number.

11.6.2 Set Info Service Number

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Info and press o

Select.

3 Scroll n to Settings and press

o Select.

4 Enter the information service

account number (maximum 14 digits) and press o OK.

• A confirmation tone will sound

and the display will return to the

Info screen.

11.7 Information Service 2

Use this function to access a second information service account. Access and setting procedure is same as for Info Service.

11.8 Call Return

This function allows you to get information on who called you last.

Info

menu and

Select

11.8.1 Access the Call Return Service

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Return and press

o Select.

3 You are now at the Call Return

menu and Call is highlighted. Press o Select to connect to the call return account number.

11.8.2 Set Call Return Service Number

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Call Return and press

o Select.

3 Scroll n to Settings and press

o Select.

4 Enter the call return service number

(maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Call Return screen.

11.9 Cancel Call Back

When calling a busy line, some operators prompt you to press a key to activate a call back option. By activating the call back option, you will receive a call from the network as soon as your correspondent’s line is free. When responding to this call, the network will automatically connect you to that correspondent. Your

Network Service

Page 61

answering machine will not answer to this call and your call log will not record this call either. The Cancel call back feature enables you to deactivate the call back feature when you have activated it.

11.9.1 Call the Cancel Call Back Number

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Cancel Call BK and

press o Select.

3 You are now at the Cancel Call

BK menu and Call is highlighted.

Press o Select to connect to the Cancel Call Back number.

11.9.2 Set the Cancel Call Back Number

Get the cancel call back number from your service provider.

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Cancel Call BK and

press o Select.

3 Scroll n to Settings and press

o Select.

4 Enter the cancel call back number

(maximum 14 digits) and press o OK.

• A confirmation tone will sound and the display will return to the

Cancel Call BK screen.

11.10 Withhold ID

Use this function to make a call without sending your ID.

11.10.1 Activating Withhold ID

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Withhold ID and

press o Select.

3 You are now at the Withhold ID

menu and Activate is highlighted. Press o Select to activate the withhold ID function.

11.10.2 Set the Withhold ID Code

When withhold ID is active (see above), this code is appended before the number you dial to tell the handset to withhold ID information. Get this code from your service provider.

1 Press m in idle mode, scroll n to

Netw. Services, and press o Select.

2 Scroll n to Withhold ID and

press o Select.

3 Scroll n to Settings and press

o Select.

4 Enter the withhold ID code and

press o OK.

• A confirmation tone will sound and the display will return to the Withhold ID screen.

Network Service

Page 62

12 Telephone

12.1 Playing Messages

answering machine

(TAM)

Your phone features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 59 messages. The maximum recording time is 3 minutes per message, or 30 minutes for all messages. The maximum length of an outgoing message is 1 minute. You can use the control keys on the base station to perform the basic functions of the answering machine such as message playback, deleting messages and adjustment of volume on the base station. For a description of each function of the control keys on the base station, please see “Overview of the base station” (section 5.4) for more details. You can also use the answering machine menu on the handset to access the answering machine functions. Those procedures are covered below. There is also a menu to set the answering machine options. The telephone answering machine is ON by default. To switch the answering machine between on and off, press your base station. Alternatively, you may switch the answering machine on and off via your handset (see section 12.6.2).

12.1.1 Playback of messages via handset

The answering machine message counter blinks when there are new messages and display the number of new messages. The first recorded message is played first via the loudspeaker. When all new messages have been played, the answering machine will stop and the message counter will stop blinking.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Play is highlighted. Press o

Select to start playing new messages.

• The handset displays New and

the number of new messages in the format 01/04, where 01 is the number of the message being played and 04 is the number of new messages.

• If there are no new messages, the handset displays the number of old messages in the same format (however ‘New’ is not displayed.) and plays the old messages.

12.1.2 Functions available during playback

During playback, you can enable the following functions by pressing o Menu. Use n to scroll between the functions and press o Select to confirm.

Telephone answering machine (TAM)

Page 63

Repeat Replay the current

message

Next Listen to the next

message.

Previous Listen to the previous

message.

Delete Delete the message

currently playing.

12.2 Delete all messages

Warnin g

Deleted messages cannot be recovered.

Note

Unplayed messages will not be deleted.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Delete All and press

o Select.

3 Delete All? is displayed on the

screen. Press o OK to confirm deletion of all your messages.

• Waiting… is displayed while the

messages are deleted; then, Deleted is displayed for 2 seconds, and the display returns to the Answer Machine menu.

12.3 Turn the Answering Machine

On/Off

You can turn the answering machine on or off from the handset as follows.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Answer On/Off and

press o Select.

3 Scroll n to select On or Off and

press o Select.

• A validation tone is emitted and

the screen returns to Answer

Machine menu.

12.4 Play, Record, or Delete an Outgoing Message

You can record a personalized message to be played when the answering machine picks up an incoming call.

Note

The maximum length of an outgoing message is 1 minute.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Record OGM and

press o Select.

3 Scroll n to select Answer & Rec.

or Answer Only and press o Select.

4 Scroll n to select Play, Record

Message, or Delete and press o Select.

• If Play is selected, the current

outgoing message is played.

• If Record Message is selected,

a beep sounds and the handset starts automatically recording a message.

• If Delete is selected and a

personal outgoing message was previously recorded, Deleted is displayed. The predefined OGM is reinstated automatically.

Telephone answering machine (TAM)

Page 64

12.5 Set the Answer mode

There are 2 answer modes available: Answer Only and Answer & Record. By default, the answer mode is Answer & Record, which lets your caller leave a message on the answering machine. This can be changed to Answer Only mode, which does not allow your caller to leave any messages on the answering machine.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Answer Mode and

press o Select.

3 Scroll n to select Answer & Rec.

or Answer Only and press o Select.

• A validation tone is emitted and

the screen returns to Answer

Machine menu.

Note

Depending on the answer mode you have selected, the appropriate default outgoing message is played once the answering machine picks up an incoming call.

Tip

You can set the answering machine to play a personalized outgoing message. See 12.4 above.

playing your greeting message after 3 to 8 rings or the “Economy” option. The default ring delay is Economy.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Settings and press

o Select.

3 Ring Delay is highlighted. Press

o Select, then scroll n to select from 3 to 8 or Economy.

4 Press o Select to confirm.

• A validation tone is emitted and the display returns to the

Settings menu.

Note

If Economy is selected, the ring delay depends on the answering machine’s condition.

• If there are new messages in the answering machine, it will pick up the line after 2 rings.

• If there are no new messages in the answering machine, it will pick up the line after 4 rings.

• Hence, if you want to check if you have any messages without incurring call charges, you can hang up the call after the 3rd ring.

12.6 Answering Machine Settings

12.6.1 Ring Delay

This is the number of rings before the answering machine answers and starts playing your greeting message. You can set the answering machine to start

12.6.2 Remote Access

You can check the messages on your answering machine by calling in from an outside line and entering the remote access code*. The keypad on the phone you use to dial in acts like the functions on your answering machine.

Telephone answering machine (TAM)

Page 65

Note

This feature is deactivated by default. * The remote access code (which is the same as your PIN code) prevents any unauthorised remote access of your answering machine.

12.6.2.1 Activate/Deactivate Remote Access

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Settings and press

o Select. Then, scroll n to

Remote Access and press o Select.

3 Scroll n to select Activate or

Deactivate and press o Select.

• A validation tone is emitted and

the screen returns to Settings menu.

12.6.2.2 Controlling the Answering Machine from an external call

1 From your external phone, dial

home.

• The answering machine answers and starts playing your greeting message.

2 Press # key and a voice prompt

invites you to enter your PIN code. Enter the remote access code (same as your PIN code).

• If the access code is incorrect, a voice prompt “Security code error, please enter again” will

sound. Then enter the PIN code again. If the PIN code is still incorrect, the answering machine will drop the line immediately.

• If the remote access code is correct, a short validation tone will be heard.

Note

Operation is cancelled if the PIN code is not entered within 8 seconds. If the answering machine is off, the phone will enter into the remote access mode after 10 rings. A voice prompt “Please enter your PIN code” will then sound, prompting you to enter the PIN code. Enter the PIN (default is 0000) to activate the remote access feature. You can then turn ON the answering machine and play the recorded messages.

The following table indicates how to access the functions of the answering machine using the telephone keypad.

Key

1 Go to previous message. 2 Play the message. 3 Skip to the next message. 6 Delete the playing message. 7 Turn on the answering

8 Stop message playback. 9 Turn off the answering

12.6.3 Handset Screening

When Handset call screening is set to On, you can press o Screen to start call screening for incoming messages. If

Action

machine.

Telephone answering machine (TAM)

Page 66

you decide to pick up the call, press t. Once you pick up, the recording will stop automatically.

Note

If you have multiple handsets, only one handset can enable handset call screening for each call.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Settings and press

o Select. Then, scroll n to HS Screening and press o Select.

3 Scroll n to select On or Off and

press o Select.

• A validation tone is emitted and

the screen returns to Settings menu.

12.6.4 Setting the Outgoing Message Language

The language of the default outgoing messages and the voice prompts is originally set to English. However you can change the language of the default outgoing messages as follows.

1 Press the m key in idle mode,

scroll n to Answer Machine, and press o Select.

2 Scroll n to Settings and press

o Select. Then, scroll n to

Voice Language and press o Select.

3 Scroll n to select the language and

press o Select.

• A validation tone is emitted and

the screen returns to Settings menu.

13 Technical data

Display

• Color LCD with backlight

• Selectable wallpaper

• Selectable color theme

General telephone features

• Caller name & number identification

• 5 standard + 10 polyphonic ringer melodies

• Wideband synthesis for receiver and loudspeaker

Phonebook list, Redial list and Call log

• Phonebook list with 200 entries

• Redial list with 10 entries

• Call log with 50 entries

Battery

• 2 × AAA, 600mAh batteries

Radio specifications

• Frequence Band: 1920 - 1930Mhz

• Maximum output power: 120mW

Weight and dimensions

Base:

• 189.5 grams

• 77mm × 115mm × 131mm (H × D × W)

Handset:

• 128.5 grams

• 162mm × 31.5mm × 48mm (H × D × W)

Te c h ni c al d a ta

Page 67

Temperature range

• Operation: Between 0 and 35ºC (32 to 95ºF).

• Storage: Between -20 and 70ºC (-4 to 158ºF).

Relative humidity

• Operation: Up to 95% at 40°C

• Storage: Up to 95% at 40°C

14 Frequently asked

questions

icon is not blinking during

charge!

• Battery is full: There is no need to charge the battery.

• Bad battery contact: Adjust the handset slightly.

• Dirty contact: Clean the batteries contact with a cloth moistened with alcohol.

Communication is lost during a call!

• Charge the battery

• Move closer to the base station.

The phone is “Out of range”!

• Move closer to the base station.

www.philips.com/support

In this chapter, you will find the most frequently asked questions and answers about your phone.

14.1 Connection

The handset does not switch on!

• Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on.

• You may have accidentally switched off the handset. In this case, press and hold h for at least 1 second to switch it on again (see section 8.1 “Switch the handset off/on”).

The handset does not charge!

• Check charger connections.

Frequently asked questions

14.2 Set-up

Searching... is displayed on handset and icon is blinking!

• Move closer to the base station.

• Make sure that your base station is on.

• Reset your unit and restart handset registration.

14.3 Sound

Handset does not ring!

Check that the Ring Volume is not set to no bars (Ringer Off), and make sure the icon is not displayed on the screen (see section 9.2.1 - “Set the Ring Vol um e” ).

Page 68

Caller does not hear me!

Microphone may be muted: During a call, press s.

There’s no dialling tone!

• No power: Check the connections.

• Batteries are empty: Charge the batteries.

• Move closer to the base station.

• Wrong line cable used: Use the line cable provided.

• Line adaptor is required: Connect the line adaptor to the line cord.

Caller does not hear me clearly!

• Move closer to the base station.

• Move the base station at least one metre away from any electronic appliances.

Frequent noise interference on my radio or television!

• Move the base station as far away as possible from the electrical appliances.

The handset cannot be registered to the base station!

• Maximum number of handsets (8) has been reached. To register a new handset, unregister an existing handset.

• Remove and replace the handset batteries.

• Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see section 10.6).

Caller number is not displayed!

• Service is not activated: Check your subscription with your network operator.

I cannot change the settings of my voice mail!

• Operator voice mail is managed by your operator and not the phone itself. Please contact your operator should you want to change the settings.

14.4 Product behaviour

Keypad does not work!

• Unlock your keypad: Long press *

in idle mode.

The handset warms up when making a long call and when it is on the base station!

• This is a normal behavior. The handset consumes energy while calling and charging.

My handset keeps going into idle mode!

• If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station (if auto hang-up feature is on).

Frequently asked questions

Page 69

Phonebook entry cannot be stored and Memory Full is displayed!

• Delete an entry to free memory before saving your contact again.

The PIN code is wrong!

• The default PIN is 0000.

• Reset the handset to revert to the default PIN code if it has been changed before (see “Reset Unit” Section 10.8).

The answering machine does not record calls.

• Make sure the answering machine is connected to the power adaptor, and the power adaptor is plugged into mains supply which is switched on.

• Check if the answer machine is off, or Answer only mode is selected.

• Check to see if the answering machine is memory full. If so, delete some or all messages.

• Try switching off the power at the mains socket, and then turn it on again after 1 minute.

Unable to perform remote operation

• Make sure the remote access is on (see Section 12.6.2).

• Make sure you entered the correct remote access code.

• Use a touch-tone phone.

Note

If the above solutions do not help, remove the power from both the handset and the base. Wait for 1 minute and try again.

Frequently asked questions

Page 70

15 INDEX

Access Info Service 58 Access phonebook 35 Access Redial list 38 Access the Call log 39 Access the Call Return Service 58 Activate/Deactivate loudspeaker

mode 34

Activate/Deactivate Remote Access 63 Activating Withhold ID 59 Adjust earpiece or speaker volume 34 Advanced settings 47 Advanced Settings menu tree 29 Answer a call 33 Answer an external call during

intercom 42

Answer Machine menu tree 31 Answering Machine Settings 62 Auto Conference 48 Auto hang-up 46 Auto Prefix 51

Backlight timing 46 Base station 21 Batteries 23

Call Barring 48 Call Forward 54 Call Forward when Busy 55 Call Forward when Unanswered 56 Call from redial list 32 Call from the call log 32 Call from the phonebook 32

Call Return 58 Call the Cancel Call Back Number 59 Call using Direct Access Memory 33 Cancel Call Back 58 Change Call Forward Activation

Codes 54

Change Call Forward Deactivation

Code 54

Change Call Forward when Busy

Activation Codes 55

Change Call Forward when Busy

Deactivation Code 56

Change Call Forward when Unanswered

Activation Codes 56

Change Call Forward when Unanswered

Deactivation Code 57 Change PIN 49 Change the Dial Mode 52 Change the Display Language 45 Change the Handset Name 44 Charge battery 24 Clock and Alarm menu tree 28 Clock and Alarm settings 43 Color themes 46 Connect the base station 22 Contrast 46

Deactivate/Activate Auto Hang-Up 46 Default PIN code 49 Default settings 53 Delete a call list entry 41 Delete a phonebook entry 37 Delete a redial number 39 Delete all call list entries 41

INDEX

Page 71

Delete all messages 61 Delete all phonebook entries 37 Delete all redial numbers 39 Delete Direct Access Memory 38 Dial mode 52 Direct Access Memory 37 Direct dialling 32 Display icons and Messages 19 Display languages 45

Make a call 32 Menu structure 26 Modify a phonebook entry 36 Mute/Unmute microphone 34

Network Service 53 Network Services menu tree 30

Easy Call 47 End a call 33 Establish a three-party conference call 42

Frequently asked questions 65 Functions available during playback 60

Getting started 22

Handset name 44 Handset Screening 63 Handset Tones 44 Handsfree answering 33

Information Service 1 57 Install battery 23 Install your phone 23 Intercom 41

Key Beep 45 Keypad lock/unlock 34

INDEX

Overview of the base station 21 Overview of your phone 17

Paging 42 Personal settings 44 Personal Settings menu tree 27 Personalized message 61 Phonebook menu tree 26 PIN 49 Play, Record, or Delete an Outgoing

Message 61 Playback of messages via handset 60 Playing Messages 60 Power requirements 7 Predialling 32

Registration 49 Remote Access 62 Reset Unit 50 Ring Delay 62 Ring tones 45 Ring Volume 44

Save a redial number 38 Save call list entry 40

Page 72

Select phonebook melody 36 Select the Color Theme 46 Select the Display Wallpaper 45 Set a Call Barring number 48 Set Alarm 43 Set Alarm Tone 44 Set Auto Prefix 51 Set Call Barring Mode 48 Set Call Return Service Number 58 Set Date and Time 43 Set Date Format 43 Set Easy Call number 47 Set Easy Call to On or Off 47 Set First Ring Detection 52 Set Info Service Number 58 Set the Answer mode 62 Set the Backlight Time 46 Set the Cancel Call Back Number 59 Set the Display Contrast 46 Set the Ring Tones 45 Set the Ring Volume 44 Set the Withhold ID Code 59 Set Time Format 43 Set Voice Mail Number 57 Setting the Outgoing Message

Language 64 Store a contact in the phonebook 35 Switch between an internal and external

call 42 Switch the handset off/on 34

Technical data 64 Telephone answering machine 60 Text or number entry 34 The call log 39 Transfer an external call 41 Turn the Answering Machine On/Off 61

Unregister 50 Using the Call log 39 Using the Intercom 41 Using the Redial list 38 Using your phone 32 Using your Phonebook 35

Voice Mail 57

Wallpaper images 45 What’s in the box 16 Withhold ID 59

XHD Sound 49

Your phone 16

UCZZ01937UA(0)

INDEX

Page 73

Reproduction in whole or in part is prohibited without the

written consent of the copyright owner

Document order number: 3111 285 47022 (US-EN)

Philips SE655 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Important Safety Instructions

2.1 Safety information

2.2 Power requirements

2.3 Battery requirements

2.4 Telephone connection

Environment and safety

2.5 Environmental care

2.6 Precautions

2.7 Equipment Approval Information

2.8 Interference Information

2.9 Hearing Aid Compatibility (HAC)

2.10 FCC RF Radiation Exposure Statement

3Important

3.1 Power requirements

3.2 Electric, Magnetic and Electromagnetic Fields (“EMF”)

3.3 Recycle your batteries

4 The RBRC® seal

4.1 Service Centers

5 Your phone

5.1 What’s in the box

5.2 Overview of your phone

5.3 Display icons and Messages

5.4 Overview of the base station

6 Getting started

6.1 Connect the base station

6.2 Wall mounting the base

6.3 Install your phone

6.4 Remove/Attach belt clip

6.5 Install optional headset

6.6 Using multipacks

6.7 Menu structure

7 Using your phone

7.1 Make a call

7.2 Answer a call

7.3 End a call

8.1 Switch the handset off/on

8.2 Keypad lock/unlock

8.3 Text or number entry

8.4 Call in progress

Use more of your phone

8.5 Chain dialing

8.6 Using your Phonebook

8.7 Using the Redial list

8.8 Call waiting

8.9 Using the Call log

8.10 Using the Intercom

8.11 Paging

8.12 Clock and Alarm settings

9 Personal settings

9.1 Change the Handset Name

9.2 Handset Tones

9.3 Change the Display Language

9.4 Select the Display Wallpaper

9.5 Select the Color Theme

9.6 Set the Display Contrast

9.7 Set the Backlight Time

9.8 Deactivate/Activate Auto Hang-Up

10 Advanced settings

10.1 Easy Call

10.2 Auto Conference

10.3 Call Barring

10.4 XHD Sound

10.5 Change PIN

10.6 Registration

10.7 Unregister

10.8 Reset Unit

10.9 Set Area Code

10.10 Set Auto Prefix

10.11 Change Flash time

10.12 Change the Dial Mode

10.13 Set First Ring Detection

10.14 Default Settings Parameter Default Value

11 Network Service

11.1 Call Forward

11.2 Call Forward when Busy

11.3 Call Forward when Unanswered