Philips SE565 User Manual

Quick Start Guide

SE565

1 2

Connect

Install

Enjoy

View the phonebook

1 Press .

2 Select a contact and view the available information.

Call from the phonebook

1 Press to access the phonebook.

2 Select a contact in the phonebook list.

3 Press

to make the call.

ECO mode

The ECO mode reduces the transmission power of the handset and base station.

1 Press menu.

2 Select [ADVANCED SET] > [ECO], then press [SELECT] to conrm.

3 Select the new setting, then press [OK] to conrm.

The setting is saved.

ECO

is displayed instead of

in standby mode

Note

When t he • ECO mode is activated, the connection range between the handset

and the base station can be r educed.

Listen to messages recorded on the answering machine (for SE565 only)

Switch on/off the answering machine: Press • . Star t/Stop listening to the recorded messages: Press • 29 .

Adjus t the volume: Press •

+ / –.

Skip backward:•

When you listen to the messages, pr ess ¡ to listen to the message fr om the beginning.

During the rst second of the current message , press ¡ to listen to the previous

message. Skip forward: Press • ™ to skip to the next message . Delete the current message: Press • X.

Note

For mor e infor mation, see the Telephone answering machine section in the user •

manual.

Troubleshooting

Welcome to Philips

Need help?

User Manual

Refer to the User Manual that came with your new phone.

Online help

www.philips.com/support

© 2010 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners.

SE565_EN_QSG_V2.1

wk10452

No dialing tone

Check your phone connections. •

The handset is out of range. Move it closer to the base station.

The signal icon ashes.

The handset is out of range. Move it closer to the base station. •

If the handset displays [UNREGISTERED], register the handset.

The caller ID does not display.

The service is not ac tivated. Check with your service provider. • The caller’s information is withheld or unavailable . For mor e infor mation, see the User Manual.

0168

QSG_SE565_05_EN.indd 5-1 9/11/2010 17:03:39

What’s in the box

Handset*

Base station with bracket

for SE560

Line cord* Power adapter**

Guarantee, user manual and

quick start guide

SE565

Note

* In multi-handset packs, there are addi tional

handsets, chargers and power adapters.

** In some countries, you have to connect t he line

adapter to the line cord, then plug the line cord to the telephone socket.

Caution

Use only the supplied •

batteries and power adapter.

Connect

Connect the base station

Install

Install the handset

1 The batteries are pre -ins talled in the handset. Pull the batter y tape off fr om the

battery door before charging. 2 Place the handset on the base s tation to power up.

Note:

Charge the batteries for 16 hours before rst use. For more information on the battery icon status, see the User Manual.

Enjoy

Make a call

1 Press and dial the phone number; or 2 Dial the phone number and press to dial out the call.

Congure your phone (if necessary)

1 When you see the welcome message, press [OK], selec t your country, press

[SELECT] to conrm.

The country setting is saved.

2 Set the date and time.

The phone is now ready to use.

Answer a call

When the phone rings, press or to answer the call.

End a call

Press .

Adjust the earpiece volume

Press or to adjust the volume during a call.

The adjusted volume level is shown on the screen.

Set the handset’s ringtone

1 Press menu. 2 Select [PERSONAL SET] > [HANDSET TONES] > [RING TONES],

then press [SELECT] to conrm.

3 Select a ring tone, then press [SELECT] to conrm.

The setting is saved.

Add a record

1 Press menu. 2 Select [PHONEBOOK] > [NEW ENTRY ], then press [SELECT] to con -

rm.

3 Enter the name then press [OK] to conrm. 4 Enter the number, then press [SAVE] to conrm.

Connect the output plug of the power

socket to the bottom of the base station: Connect the power socket to a

standard wall outlet. Connect the telephone line cord to the

phone socket at the bottom of the base station and the wall phone socket

Telephone

socket

Power

adapter

Power socket

Telephone

base

station

Check the battery level

When t he handset is of f the base station / charger, the icon indicates the battery level:

Full (steady on)

Medium (ashing)

Low (empty) When you see the empty battery icon and hear an aler t tone from the handset, the battery level is low and needs recharging.

When the handset is on the base

station/charger, the bat tery icon keeps

ashing until charging completes.

When the charging completes, the

battery icon keeps steady on.

QSG_SE565_05_EN.indd 2-4 9/11/2010 17:03:41