Philips SE450XY-ZZ, CD450XY-ZZ, CD4502B-17 User Manual

www.philips.com/welcome

To insert with

US Telephone

Warning

Use only rechargeable batteries. Charge the handset for 24 hours before use.

CD 450

SE 450

Table of contents

1 Important Safety

Instructions 4

2Important 6

2.1 Power requirements 6

2.2 Conformity 7

2.3 Environmental 7

2.4 Recycling & disposal 7

2.5 Electric, Magnetic and Electromagnetic Fields ("EMF") 7

3 Your phone 9

3.1 What’s in the box 9

3.2 Overview of your phone 10

3.3 Overview of the base station 11

3.4 Display icons 12

3.5 The menus 12

4Getting started 13

4.1 Connect the base station 13

4.2 Connect your charger 13

4.3 Install your handset 15

4.4 Checking the battery level 16

4.5 Setting the clock 16

4.6 What is standby mode? 16

4.7 Checking the signal strength 16

Table of contents 1

4.8 Switching your handset ON/OFF 17

4.9 Menu structure 18

5Call 22

5.1 Making a call 22

5.2 Ending a call 23

5.3 Answering a call 23

5.4 During a call 23

5.5 Using the speaker or handsfree 23

5.6 Making a second call 24

6 Intercom and Conference

Calls 25

6.1 Calling another handset 25

6.2 Transferring a call 25

6.3 Making a conference call 25

7 Text and Numbers 27

7.1 Entering text and numbers 27

7.2 Switching between uppercase and lowercase 27

8 Phonebook 28

8.1 Viewing the phonebook 28

8.2 Calling from the phonebook 28

Table of contents

8.3 Adding a record 28

8.4 Editing a record 29

8.5 Setting VIP melodies 29

8.6 Deleting a record 29

8.7 Deleting all records 29

8.8 Using quick dial 29

9 Call log 31

9.1 Viewing the call records 31

9.2 Editing the caller’s number before returning a call 31

9.3 Returning a call 31

9.4 Saving a call record to your phonebook 31

9.5 Deleting a call record 32

9.6 Deleting all call records 32

10 Redial List 33

10.1 Viewing the redial records 33

10.2 Redialing a call 33

10.3 Saving a redial record to your phonebook 33

10.4 Deleting a redial record 33

10.5 Deleting all redial records 33

11 Custom Options 34

11.1 Personalizing your phone’s display 34

11.2 Personalizing your phone’s sounds 34

12 Calling Features 36

12.1 Auto hang up 36

12.2 Auto conference 36

12.3 Dial mode 36

12.4 Flash selection 36

12.5 Call barring 36

12.6 Area code management 37

12.7 Auto prefix 37

12.8 First ring 38

13 Network Services 39

13.1 Call forward 39

13.2 Voicemail 39

13.3 Info center 40

13.4 Call return 40

13.5 Cancel call back 40

13.6 Withholding ID 41

14 Extra Features 42

14.1 Alarm clock 42

2Table of contents

Table of contents

14.2 Easy call 42

14.3 Keypad lock 43

14.4 Missing handset(s) 43

15 The System 44

15.1 Registering handset(s) 44

15.2 Un-registering a handset 44

15.3 Changing your PIN 44

15.4 Restoring default settings 44

16 Default (pre-programmed)

settings 46

17 Technical Data 47

18 Frequently asked

questions 48

19 Appendix 50

19.1 Equipment approval Information 50

19.2 Notification to the local telephone company 50

19.3 Notes 50

19.4 Rights of the Phone Company 50

19.5 Interference Information 51

19.6 Noise 52

19.7 FCC RF Radiation Exposure Statement 52

19.8 Hearing Aid Compatibility (HAC) 52

19.9 Privacy 52

19.10 Additional Information 52

19.11 Terminal Equipment 52

19.12 Radio Equipment 53

19.13 Do not attempt to repair or modify this equipment 53

19.14 The RBRC® seal 53

20 Index 54

Table of contents 3

extension cords as this can result in

1 Important Safety

Instructions

Some of the following information may not apply to your particular product; however, when using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4. Telephones should not be used while you are in a bathtub, shower or pool. Immersion of the telephone or handset in water could cause an electrical shock.

5. Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation unless proper ventilation is provided.

6. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.

8. Do not overload wall outlets and

4 Important Safety Instructions

the risk of fire or electric shock.

9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

11. Do not expose the product to extreme temperatures such as areas near a hot radiator or stove or in a hot car.

12. Do not place lighted candles, cigarettes, cigars, etc., on the telephone.

13. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

14. Never install or modify telephone wiring during a lightning storm.

15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

16. Use caution when installing or modifying telephone lines to prevent electrical shock and/or fire.

17. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord or

plug is damaged or frayed.

B. If the product has been exposed

to rain or water.

C. If the product does not operate

normally by following the operating instructions.

D. If the product’s cabinet has been

damaged.

E. If the product exhibits a distinct

change in performance.

18. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

19. Do not use the telephone to report a gas leak in the vicinity of the leak.

20. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.

IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:

1. Use only the type and size of battery(ies) specified in the user manual.

2. Do not dispose of the battery(ies) in fire. They may explode. Check with local codes for possible special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4. Exercise care in handling battery(ies) in order not to short out the battery(ies) with conducting materials such as rings, bracelets, and keys. The battery(ies) or conductor may overheat and cause burns.

5. Do not attempt to recharge the battery(ies) provided with or identified for use with this product that are not intended to be charged. The battery(ies) may leak corrosive electrolyte or explode.

Important Safety Instructions 5

6. Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery(ies) electrolyte may occur causing burns or irritation to eyes or skin.

7. When replacing battery(ies), all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.)

8. When inserting battery(ies) into this product, the proper polarity or direction must be observed. Reverse insertion of battery(ies) can cause charging, and that may result in leakage or explosion.

9. Remove battery(ies) from this product if storing over 30 days because the battery(ies) could leak and damage the product.

10. Discard “dead” battery(ies) as soon as possible since “dead“ batteries are more likely to leak in a product.

11. Do not store this product, or the battery(ies) provided with or identified for use with this product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage.

12. If your product uses rechargeable battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the User Manual.

SAVE THESE INSTRUCTIONS

• Do not open the handset, base station

2Important

This product is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

2.1 Power requirements

• This product requires an electrical supply of 100-240 volts, single-phase alternating current, excluding IT installations defined in standard UL

60950.

• The electrical network is classified as dangerous according to criteria in the standard UL 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

• The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard UL

60950). Following a power cut, the call in progress, as well as the date and time settings will be lost.

• Use only Class 2 Power Source or Limited Power Source (L.P.S.), rated of

7.5 V dc, 400 mA for Model CD450XY/ZZ and SE450XY/ZZ; rated of 7.5 V dc, 200 mA for Model CD455C and SE455C.

Warning

• Do not allow the handset to come into contact with liquids or moisture.

6Important

or charger. This could expose you to high voltages.

• Do not allow the charging contacts or the battery to come into contact with conductive materials.

• There is a slight chance that your product could be damaged by an electrical storm. We recommend that you unplug the product from the power supply and telephone socket during a storm.

• Do not use the handset in an explosive hazard area such as where there is gas leaking.

• It is recommended that this product is not used near intensive care medical equipment or by persons with pacemakers.

• This product can interfere with electrical equipment such as answering machines, television, radio, and computers if placed too close. We recommend that you position the base station at least one meter from such appliances.

• Use only the main adapter supplied with this equipment. Incorrect adapter polarity or voltage can seriously damage the unit.

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use the recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.

• Handsfree activation could suddenly increase the volume in the earpiece to

a very high level: make sure the handset is not too close to your ear.

• This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com.

• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

• Do not drop your phone or allow objects to fall on your phone.

• Do not use any cleaning agents containing alcohol, ammonia, benzene,

2.3 Environmental

Remember to observe local regulations regarding the disposal of your packaging materials, exhausted batteries and old equipment. Promote their recycling

where possible. or abrasives as these may harm the set.

• Do not use the product in places where there are explosive hazards.

• Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

• Active mobile phones in the vicinity may cause interference.

About operating and storage temperatures:

• Operate in a place where temperature is always between 0 and 40º C.

• Store in a place where temperature is always between -25 and 70º C.

• Battery life may be shortened in low temperature conditions.

Warning

Metallic objects may be retained if placed near or on the handset receiver.

2.2 Conformity

We, Philips declare that the product is in compliance with the essential requirements and other relevant

2.4 Recycling & disposal

Disposal instructions for batteries: Batteries should not be disposed of with general household waste.

Packaging information: Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system. The labelled packaging material is recyclable.

2.5 Electric, Magnetic and Electromagnetic Fields ("EMF")

1. Philips Royal Electronics

manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.

Important 7

2. One of Philips' leading Business Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

3. Philips is committed to develop, produce and market products that cause no adverse health effects.

4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.

5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

8Important

3 Your phone

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

3.1 What’s in the box

with Bracket

Power supply

User Manual

Note

*The line adapter may not be attached to the line cord. You may find the line adapter in the box. In this case, you have to connect the line adapter to the line cord first before plugging the line cord to the line socket.

In multi-handset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.

Your phone 9

HandsetBase station

NiMH AAA Rechargeable

Battery door

Batteries x 2

Guarantee

Belt clip

Line Cord*

Quick start

guide

3.2 Overview of your phone

A Call Log/Up key

Scroll up menu Increase earpiece volume Enter call log

B OK key

Confirm selection Enter options menu

C Back/Clear key

Delete text or digit(s) Cancel operation View more record information

DTalk/Flash key

Make and receive calls Send flash signal

E End /On/Off key

End call Exit menu / operation Turn handset on/off

F Menu key

Access main menu

G Phonebook/Down key

Scroll down menu Decrease earpiece volume Enter phonebook

H Speaker key

Turn speaker on / off

I Redial key

Enter redial list & dial last number

J Digit keys

Dial digit and enter text Use as shortcut key for quick dial

K Star/Keylock/Format key

Dial * Lock / unlock keypad Edit caller’s number in call log review

L Ringer Off/Pause key

Dial # and enter pause Turn ringer on / off Switch between lower and upper case

MMute key

Mute / unmute microphone

N Intercom/Conference key

Make intercom call Make conference call

O New event LED

New calls, messages, voicemails

10 Your phone

3.3 Overview of the base station

A Handset locator key

Locate handset(s) Enter registration mode

PLoudspeaker Q Battery door R Headset jack

Your phone 11

3.4 Display icons

Each icon gives you a visual message of what is happening on your handset.

Battery is fully charged

Battery is fully discharged

Signal strength

Call in progress

Alarm on

Speaker on

Ringer off

Call log

Phonebook

3.5 The menus

Your phone offers a variety of features and functions grouped in the menus.

3.5.1 Browsing the menus

The main menu includes the Phonebook, Personal Set, Clock & Alarm, Advanced Set and Network Service.

From standby mode, you can,

• Press

m to enter the main menu.

• Press

u to enter the incoming call

log.

• Press

d to enter the phonebook.

• Press

l to enter the redial list.

Tip

u or d to navigate the

Use menus.

Tip

Quick Exit.

from any menu instantly. All unconfirmed changes will not be saved.

Press and hold e to exit

Voicemail indicator

More options upward

More options downward

12 Your phone

4 Getting started

4.1 Connect the base station

Connect the output plug of the main

adapter to the bottom of the base station.

Connect the main adapter to a

standard wall outlet. Connect the telephone line cord to

the phone socket at the bottom of the base station and the wall phone socket.

Note

The power adapter (for the phone and charger) are intended to be correctly orientated in a vertical or floor mount position.

4.2 Connect your charger

(For multi-pack models only)

Connect the output plug of the main

adapter to the bottom of the charger.

Connect the main adapter to a

standard wall outlet.

4.2.1 Wall mounting the base (CD450)

The base is designed to support wall mounting. To wall mount the base, follow the instructions below.

Warning

Other wall mounting methods are not recommended and may damage the product.

Remove the bracket from the back of

the base station by pressing down the two latches on the top of the bracket.

Getting started 13

Turn the bracket around.

Re-insert the bracket to the back of

the base station.

Align the mounting holes on the

back of the base with a standard wall phone mounting jack.

Slide the base down into place.

4.2.2 Wall mounting the base (SE450)

The base is designed to support wall mounting. To wall mount the base, follow the instructions below.

Warning

Other wall mounting methods are not recommended and may damage the product.

Remove the bracket from the back

of the base station by pressing down the two latches on the top of the bracket.

14 Getting started

Turn the bracket around.

Re-insert the wall-mount bracket to

the back of the base station.

Align the mounting holes on the back of

the base with a standard wall phone mounting jack.

Slide the base down into place.

4.3 Install your handset

Warning

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.

Note

Charge the handset(s) for 24 hours before initial use!

Warning

Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product.

Place the 2 rechargeable batteries

(included) into the battery compartment.

Getting started 15

Slide the battery door firmly into place.

Place the handset on the base.

Note

Handset may get warm during initial charging. This is normal. The handset may take a few seconds to power up.

4.4 Checking the battery level

The battery icon displays the current battery level.

Battery full

Battery empty. Require charging.

Your handset may power down shortly if it is not charged after the battery is empty. If you are on the phone when the battery is nearly empty, you will hear warning tones. Your call may be cut off shortly after the warning.

4.5 Setting the clock

Your phone has a digital clock. Set the clock before initial use of the phone.

4.5.1 Setting the date and time

Press

1 2

Select

CLOCK & ALARM

DATE/TIME

. Press OK.

SET

Use the digit keys to enter the date.

Press

4.5.2 Setting the date and time

You can choose how your phone displays the date (DD/MM or MM/DD) and time (12-hour or 24-hour). Each handset can have different date and time format.

1 2

4 5

4.6 What is standby mode?

Your phone is in standby mode when it is idle. The standby screen displays the handset name, the handset number, the date and time, the signal icon, and the battery icon.

4.7 Checking the signal strength

The signal icon displays the link status between your handset and the base station. A steady icon means your handset and the base station are linked. A flashing icon means your handset and the base station are not linked. If you move too far away from the base station while you are on the phone, you

• The handset displays the time editing screen.

Use digit keys to enter the time. Scroll to select is in 12-hour format. Press

• The setting is saved.

format

Press Select

FORMAT

Select

FORMAT

Select the setting you want. Press

• The setting is saved.

or PM if the time

CLOCK & ALARM

. Press OK.

DATE FORMAT

TIME

SET

16 Getting started

+ 41 hidden pages