Philips SDV2730-27 User Manual [en, es, fr]

SDV2730/27
EN Amplied indoor antenna 2
FR Antenne intérieure 6
ES Antena amplicada para interiores 11
Register your product and get support at: www.philips.com/welcome
2730_27.indb 1 5/6/08 3:56:50 PM
Table of Contents
4. Using your television antenna 4
4.1 For VHF
reception 4
6. Warranty and service 5
1 Important
Take time to read this manual before you use your Philips indoor television antenna. It contains important information and notes regarding installation and set up.
© 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Please inform yourself about your local collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.
Take the package to your local recycling center.
2
2730_27.indb 2 5/6/08 3:56:50 PM
3
2 Your indoor television antenna
Congratulations on your purchase and welcome to Philips!
To fully benet from the support that Philips offers, register your product at
www.philips.com/welcome.
2.1 Product overview
A VHF antenna
B Power indicator C UHF antenna D Power switch/gain control knob E 6V DC power connection F Out to TV connection G Stand H 120V AC/6V DC power adaptor, included
3 Getting Started
Before you start: For this antenna to work properly, you must access the menu on the television you are connecting this antenna to (consult your television owner’s manual) then set it to receive the signal from an ANTENNA or OFF AIR instead of CABLE or SATELLITE.
3.1 Installation
Determining Signal Strength
Before installation determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, the antenna should be facing towards transmitter.
E Tip Where possible, choose a location near a window which will give the antenna a clear view of the transmitter.
E Tip Do not place the antenna on a metal surface.
ENGLISH
STOP
H
CB
D
A
E F
MAX. MIN.
G
6V 100mA OUTPUT
2730_27.indb 3 5/6/08 3:56:51 PM
4
3.2 Connect to your TV
1 Connect one end of the coaxial cable to
signal output of the antenna and the other end to the input on your TV receiver.
1
2 Connect DC plug to the antenna and the
power supply to a 120V AC outlet.
2
4 Using your indoor television antenna
4.1 For VHF reception
1
Extend the telescoping dipoles to the
longest possible length.
3
2 Turn your TV to the desired channel. Adjust
the dipoles by moving in different directions up and down, until reception is achieved.
3
3 Turn on the amplier by rotating the gain
control knob towards the max position until better reception is achieved.
4
D Note
You may need to turn the gain control down to a lower setting for best reception.
4.2 For UHF reception
1 Turn your TV to the desired channel. 2 Position antenna toward transmitter until
reception is achieved.
3 Turn on the amplier by rotating the gain
control knob towards the max position until reception is improved.
D Note
You may need to turn the gain control down to a lower setting for best reception.
E Tip
This antenna can be placed on a vertical A and horizontal B orientation to extend reception choices. 5
6V 100mA
2
ANT.
TV
OUTPUT
1
3
MAX. MIN.
4
MAX. MIN.
6V 100mA
OUTPUT
MAX. MIN.
6V 100mA OUTPUT
5
-or-
A B
2730_27.indb 4 5/6/08 3:56:55 PM
5
ENGLISH
4.3 Setting up a digital tuner with this antenna
Digital TV tuners require you to program the tuner with the available channels in your area. Generally this automatic process is part of the set-up of the tuner. However, if you do not have the antenna set up properly you may nd that the tuner receives no viewable channels.
If you have access to a rooftop antenna or another antenna which is currently connected to a digital tuner you may use the antenna to program the tuner. The channels will be memorized in the tuner - which will make aligning this antenna easier.
Another method is to connect the antenna directly to your TV (not using the tuner) and tune to analog channels to nd best location of the antenna, then re-connect the digital tuner – if you have adequate signal level you should be able to program the tuner.
5 Frequently asked questions
Will this antenna work with Analog transmissions?
Yes, this antenna is capable of receiving analog television broadcasts in the UHF and VHF bandwidths.
Will this antenna receive digital or work with HD-ATSC broadcasts?
Yes, this antenna is designed to receive Digital ATSC and HDTV broadcasts in the UHF and VHF bandwidths.
Where should I place the antenna in order to get the best reception possible?
Where possible, choose a location that is near a window which will give the antenna a clear view of the transmitter.
D Note
For best reception you should also avoid placing the antenna on a metal surface which may cause interference.
How do I know how much gain (amplication) is required to receive a clear picture?
Once you have the VHF dipoles extended to the longest length turn on the amplier. It is easiest to start with the maximum gain and then reduce as needed. In some cases you may receive a clearer picture with less gain than the maximum setting.
Can I set this antenna up with a digital tuner?
Yes, this antenna can be set up with a digital tuner. See section 4.3 of your user manual.
6 Warranty & Service
Warranty information can be found at: www.philips.com/welcome
For technical support, send us an email with the model number of the product and a detailed description of your problem to: accessorysupport@philips.com
2730_27.indb 5 5/6/08 3:56:55 PM
Loading...
+ 11 hidden pages