- Continuous and prolonged sucking of
uids will cause tooth decay.
- Always check food temperature before
feeding.
- Heating in a microwave oven may
produce localised high temperatures.
Take extra care when you heat up food in
a microwave. Always stir heated food to
ensure even heat distribution and test the
temperature before serving.
- Keep all components not in use out of the
reach of children.
- Do not allow child to play with small parts
or walk/run while using bottles or cups.
- Do not place in a heated oven.
- Drinks other than milk and water, such as
fruit juices and avored sugary drinks are
not recommended. If used, they should
be well diluted and only used for limited
periods.
- Do not use abrasive cleaning agents or
anti-bacterial cleaners. Do not place
components directly on surfaces that have
been cleaned with anti-bacterial cleaners.
- Expressed breast milk can be stored in
sterilized Philips Avent bottles/containers
in the refrigerator for up to 48 hours
(not in the door) or in the freezer for up
to 3 months. Never refreeze breast milk
or add fresh breast milk to already frozen
milk.
- Plastic material properties may
be aected by sterilizing and high
temperatures. This can aect the t of
the cap.
- Do not use handles with glass bottles.
- Throw away any part at the rst signs of
damage or weakness.
- Do not alter the product or parts of it
in any way. This may result in unsafe
functioning of the product.
Teat
- Inspect before each use and pull the
feeding teat in all directions. Throw away
at the rst signs of damage or weakness.
- For hygiene reasons, we recommend
replacing teats after 3 months.
- Keep teats in a dry, covered container.
- Do not leave a feeding teat in direct
sunlight or heat, or leave in disinfectant.
Before rst use
- Before rst use, disassemble all parts,
clean and sterilise the product.
- Clean to ensure hygiene by washing and
rinsing all parts thoroughly.
- Sterilise by using a Philips Avent sterilizer
or boil all parts for 5 minutes.This is to
ensure hygiene.
- During sterilising with boiling water,
prevent the bottle or other parts from
touching the side of the pan. This can
cause irreversible product deformation
or damage that Philips cannot be held
liable for.
- Inspect the feeding teat before use and
pull the feeding teat in all directions.
Do not use damaged products.
Cleaning
- After every use, take all items apart, wash
in warm soapy water and rinse thoroughly.
Make sure that you wash your hands
thoroughly and that the surfaces are clean
before contact with sterilised components.
- Excessive concentration of detergents
may eventually cause plastic components
to crack. Should this occur, replace
immediately.
- Dishwasher safe - food colorings may
discolor components.
- Do not leave a feeding teat in direct
sunlight or heat, or leave in disinfectant
(‚sterilising solution‘) for longer than
recommended, as this may weaken
the teat.
- Clean all parts before each use.
- Inspect the bottle and feeding teat before
each use and pull the feeding teat in all
directions. Throw away at the rst signs of
damage or weakness of any part.
Page 2
Assembly
When you assemble the bottle, make sure
you place the cap vertically onto the bottle so
that the teat sits upright (see image for more
details). To remove the cap, place your hand
over the cap and your thumb in the dimple
of the cap. The teat is easier to assemble if
you wriggle it upwards instead of pulling it up
in a straight line. Make sure you pull the teat
through until its lower part is even with the
screw ring.
Maintenance
- Before each use, inspect all items. Pull the
feeding teat in all directions.
- Throw away any part at the rst signs of
damage or weakness.
- For hygiene reasons, we recommend
replacing teats after 3 months.
- Keep teats in a dry, covered container.
- When not in use, do not leave in sunlight
or heat, or leave in disinfectant (‚sterilising
solution‘) for longer than recommended,
as this may weaken the teat. Do not place
in a heated oven.
Glass natural bottle
Glass bottles may break. Do not use metal
inside the bottle to stir contents or for
cleaning. This can damage the glass on the
inside of the bottle. Before each use, inspect
bottles for sharp edges or glass fragments
inside. Do not use bottles if there are any
cracks on or glass fragments in the bottle.
Do not let babies drink unsupervised with this
bottle. Do not use handles with glass bottles.
Choosing the right teat for your baby
The Philips Avent teats are available with
dierent ow rates to help your baby with
drinking. Over time you can change the teat
accommodating the individual needs of
your baby. Philips Avent teats are clearly
numbered on the side to indicate ow rate
(see image). Make sure you use a teat with the
correct ow rate when you feed your baby.
Use a lower ow rate if your baby chokes,
is leaking milk or has trouble adjusting to
the drinking speed. Use a higher ow rate if
your baby falls asleep during feeding, gets
frustrated or when feeding takes a very long
time.
These Philips Avent teats can be used on
the Natural Philips Avent feeding bottle and
Philips Avent storage cups. Teats are available
for 0m, 0m+, 1m+, 3m+, 6m+, variable
ow (I/II/II) and thick feed (Y).
(0)The teat for 0m can be used from day one.
Extra soft silicone teat and it is the lowest
ow rate available. Ideal for newborn and
breastfed babies of all ages. The teat only has
one opening for uids and the number 0 is
shown on the teat.
(1) The teat for 0m+ has an extra soft silicone
teat. Ideal for newborn and breastfed babies
of all ages. The teat has only one opening for
uid and the number 1 is shown on the teat.
(2) The teat for 1m+ has an extra soft silicone
teat. Ideal for breastfed babies of all ages.
The teat has two openings for uid and the
number 2 is shown on the teat.
(3) The teat for 3m+ has an extra soft silicone
teat. For bottle fed babies at 3 months of age
and up. The teat has three openings for uid
and the number 3 is shown on the teat.
(4) The teat for 6m+ has a bite resistant
silicone teat. The sturdier teat is ideal for
bottle fed babies at 6 months of age and up.
The teat has four openings for uid and the
number 4 is shown on the teat.
(I/II/III) Variable ow: has a bite resistant
silicone teat. The sturdier teat, with an
adjustable ow rate to babies convenience is
ideal for bottle fed babies at 3 months of age
and up. The teat has one slot cut on the top
for uid and the markings I, II, III on the edges
of the teat.
(Y) Thick feed: has a bite resistant silicone teat.
The sturdier teat, designed for thicker feeds is
ideal for bottle fed babies at 6 months of age
and up. The teat has one Y cut for uid and
the symbol Y on the teat.
Note: Every baby is unique and your
baby‘s individual needs may vary from the
description of ow rates.
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Centre in your country
(see the worldwide guarantee leaet for
contact details).
Compatibility
- Spare teats are available separately.
Make sure you use a teat with the correct
ow rate when you feed your baby (see ‚Choosing the right teat for your baby‘).
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to
your Philips dealer. You can also contact
the Philips Consumer Care Centre in your
country.
- When you use an Philips Avent sterilizer,
please check on the website how to place
the Natural bottle.
- The high quality plastic Natural bottle is
compatible with most Philips Avent breast
pumps, spouts, sealing discs and cup tops.
- The glass Natural bottle is compatible
with Philips Avent breast pumps and
sealing discs. For safety reasons, it is not
recommended to use glass Natural bottles
with handles, spouts and cup tops and
spouts. If the bottle falls, it may break.
한국의
아기의 안전과 건강을 위한
경고!
- 본 제품은 반드시 성인의 관리 아래
사용하십시오.
- 젖꼭지를 노리개로 사용하지 마십시오.
- 아기가 장시간 계속하여 액체를 빨면 충치가
생길 수 있습니다.
- 수유나 이유 전에는 반드시 음식의 온도를
확인하십시오.
- 전자레인지로 데우면 특정 부분만 뜨거워질
수 있습니다. 전자레인지로 모유/분유를 데울
때는 각별한 주의가 필요합니다. 열이 고르게
전달될 수 있도록 데운 이유식과 우유를 저은
다음, 먹이기 전에 온도를 확인하십시오.
- 사용하지 않는 모든 부품은 어린이의 손이
닿지 않는 장소에 보관하십시오.
- 젖병이나 컵 사용 시 아기가 소형 부품을
가지고 놀거나, 걷거나 뛰지 않도록 하여
주십시오.
- 가열된 오븐에 넣지 마십시오.
- 우유와 물 외에 과일 주스, 향이 첨가된
청량음료 등은 넣지 않는 것이 좋습니다.
부득이한 경우 적당히 희석하여 단시간
동안만 사용하십시오.
- 연마성 세제 또는 박테리아 방지 세제를
사용하지 마십시오. 부품을 박테리아 방지
세제로 세척한 표면에 바로 접촉하지
마십시오.
- 유축한 모유는 소독된 필립스 아벤트
젖병이나 용기에 넣어 상온이 아닌
냉장고에서 48시간, 냉동고에서 3개월까지
보관할 수 있습니다. 모유를 다시 얼리거나,
신선한 모유를 얼린 모유에 추가하지
마십시오.
- 플라스틱 재질 제품은 고온에 소독하는
경우 변형되어 캡을 끼우는 데 영향을 줄 수
있습니다.
- 유리 젖병과 함께 핸들을 사용하지 마십시오.
- 손상되거나 약해진 부분이 하나라도
발견되면 바로 폐기하십시오.
- 제품이나 부품을 절대 개조하지 마십시오.
제품 작동이 위험해질 수 있습니다.
젖꼭지
- 매 사용 전 젖꼭지를 여러 방향으로 당겨
확인하십시오. 손상되거나 약해진 부분이
발견되면 바로 폐기하십시오.
- 위생상의 이유로 3개월 마다 젖꼭지를
교체하는 것이 좋습니다.
- 젖꼭지를 습기 없는 용기에 뚜껑을 덮어
보관하십시오.
- 젖꼭지를 직사광선이나 화기 근처에 두거나
살균 장치에 넣어 두지 마십시오.
처음 사용 전
- 처음 사용하기 전에 모든 부품을 분해해
제품을 세척 및 소독하십시오.
- 모든 부품을 깨끗이 세척하고 헹궈
위생적으로 사용하십시오.
- 필립스 아벤트 소독기를 사용하거나 모든
부품을 5분간 끓이면 위생적으로 사용할 수
있습니다.
- 끓는 물로 소독하는 동안에는 젖병이나 다른
부품들이 팬의 측면에 닿지 않도록 하십시오.
제품에 회복 불가능한 변형이나 손상을
일으킬 수 있고 필립스는 이에 대해 책임을
지지 않습니다.
- 사용 전 젖꼭지를 여러 방향으로 당겨
확인하십시오. 손상된 제품을 사용하지
마십시오.
세척
- 매 회 사용 후 모든 부품을 분해하여 따뜻한
비눗물로 세척하고 깨끗이 헹구십시오.
소독된 부품을 만지기 전에는 반드시 손을
깨끗이 씻고, 제품이 닿는 면을 깨끗하게
유지하십시오.
- 세제를 과도하게 사용하면 플라스틱
소재가 깨질 수 있습니다. 이 경우 즉시
교체하십시오. 그런 경우 즉시 교체하십시오.
- 식기 세척기로 세척 가능하지만 음식물
색상으로 인해 부품이 변색될 수 있습니다.
- 젖꼭지를 직사광선이나 화기 근처에 두지
마십시오. 또는 살균 장치(“소독제”)
에 권장 시간 이상 넣어 두지 마십시오.
젖꼭지가 약해질 수 있습니다.
- 매 사용 전에 모든 부품을 매번
세척하십시오.
- 매 사용 전 젖병과 젖꼭지를 여러
방향으로 당겨 확인하십시오. 손상되거나
약해진 부분이 하나라도 발견되면 바로
폐기하십시오.
조립
젖병을 조립할 때 젖병 위에 캡을 수직으로
끼워서 젖꼭지를 똑바로 세우십시오(자세한
내용은 이미지 참조). 캡을 분리하려면 손을 캡
위에 올려서 캡의 옴폭 들어간 부분에 엄지를
올려 놓습니다. 젖꼭지를 일직선으로 당기는 것
보다 위쪽으로 흔들어서 당기는 편이 조립하기가
더 쉽습니다. 나사 링으로 젖꼭지의 하단부가
평평해 질 때까지 젖꼭지를 잡아 당기십시오.
유지관리
- 사용하기 전에 모든 부품을
확인하십시오. 젖꼭지를 여러 방향으로
당기십시오.
- 손상되거나 약해진 부분이 하나라도
발견되면 바로 폐기하십시오.
- 위생상의 이유로 3개월 마다 젖꼭지를
교체하는 것이 좋습니다.
- 젖꼭지를 습기 없는 용기에 뚜껑을 덮어
보관하십시오.
- 사용하지 않을 때는 직사광선이나 화기
근처에 두지 마십시오. 또는 살균 장치
(“소독제”)에 권장 시간 이상 넣어 두지
마십시오. 젖꼭지가 약해질 수 있습니다.
가열된 오븐에 넣지 마십시오.
내츄럴 유리 젖병
유리 젖병은 깨질 수도 있습니다. 금속 물체를
넣어 내용물을 젓거나 세척하지 마십시오. 젖병
내부의 유리가 손상될 수 있습니다. 매번 사용
전에 젖병 내부에 날카로운 물체나 유리 조각이
있는지 확인하십시오. 병 안에 금이 갔거나 유리
조각이 발견된 경우 사용하지 마십시오. 아기
혼자 둔 채 젖병을 물리지 마십시오. 유리 젖병과
함께 핸들을 사용하지 마십시오.
Page 3
아기에게 맞는 젖꼭지 선택하기
필립스 아벤트 젖꼭지는 유량이 다양하여 아기가
우유를 편안하게 마실 수 있습니다. 시간이
지나면서 아기의 개인적인 필요에 따라 젖꼭지를
교체할 수 있습니다. 필립스 아벤트 젖꼭지는
측면에 숫자로 뚜렷하게 유량이 표시되어
있습니다(이미지 참조). 아기에게 우유를 먹일 때
유량이 아기에게 맞는 젖꼭지를 사용하십시오.
아기가 숨이 막혀하거나 우유를 흘리거나 마시는
속도에 적응하는 데 문제가 있다면 유량이
낮은 젖꼭지를 사용하십시오. 아기가 우유를
먹다가 잠이 들거나 짜증을 내거나 우유 먹이는
시간이 너무 오래 걸리면 유량이 높은 젖꼭지를
사용하십시오.
필립스 아벤트 젖꼭지는 필립스 아벤트 내츄럴
젖병과 필립스 아벤트 저장 컵에 사용할 수
있습니다. 젖꼭지의 유량은 0m, 0m+, 1m+,
3m+, 6m+, 가변 속도(I/II/II)와 걸쭉한
이유식(Y)용이 있습니다.
(0)0m 젖꼭지는 출생 당일부터 사용할 수
있습니다. 아주 부드러운 실리콘 젖꼭지로서
유량이 가장 낮은 제품입니다. 신생아와 모유
수유 중인 모든 연령대의 아기에게 적합합니다.
이 젖꼭지는 액체 흡입구가 하나뿐이며 숫자 0이
젖꼭지에 표시되어 있습니다.
(1) 0m+ 젖꼭지는 아주 부드러운 실리콘
젖꼭지입니다. 신생아와 모유 수유 중인 모든
연령대의 아기에게 적합합니다. 이 젖꼭지는
액체 흡입구가 하나뿐이며 숫자 1이 젖꼭지에
표시되어 있습니다.
(2) 1m+ 젖꼭지는 아주 부드러운 실리콘
젖꼭지입니다. 모유 수유 중인 모든 연령대의
아기에게 적합합니다. 이 젖꼭지는 액체 흡입구가
두 개이며 숫자 2가 젖꼭지에 표시되어 있습니다.
(3) 3m+ 젖꼭지는 아주 부드러운 실리콘
젖꼭지입니다. 젖병으로 수유하는 3개월 이상의
아기용입니다. 이 젖꼭지는 액체 흡입구가 세
개이며 숫자 3이 젖꼭지에 표시되어 있습니다.
(4) 6m+ 젖꼭지는 깨물어도 찢어지지 않는
실리콘 젖꼭지입니다. 조금 더 튼튼한 젖꼭지로서
젖병으로 수유하는 6개월 이상의 아기용입니다.
이 젖꼭지는 액체 흡입구가 네 개이며 숫자 4가
젖꼭지에 표시되어 있습니다.
(I/II/III) 가변 속도: 깨물어도 찢어지지 않는
실리콘 젖꼭지입니다. 아기에게 맞게 유량을
조정하는 편의 기능이 포함된 조금 더 튼튼한
젖꼭지로서 젖병으로 수유하는 3개월 이상의
아기용입니다. 이 젖꼭지는 상단에 액체용 슬롯
컷이 있고 젖꼭지 끝부분에 I, II, III이 표시되어
있습니다.
(Y) 걸쭉한 이유식: 깨물어도 찢어지지 않는
실리콘 젖꼭지입니다. 걸쭉한 이유식을 먹일
수 있는 조금 더 튼튼한 젖꼭지로서 젖병으로
수유하는 6개월 이상의 아기용입니다. 이
젖꼭지는 Y자 모양의 액체용 컷이 있으며 기호 Y
가 젖꼭지에 표시되어 있습니다.
참고: 모든 아기는 독특한 특성이 있고 아기마다
필요가 다르기 때문에 유량을 조정해야 합니다.
액세서리 또는 예비 부품을 구입하려면
www.shop.philips.com/service를 방문하거나
필립스 대리점에 문의하십시오. 또한 해당 국가의
필립스 고객 상담실에 문의하셔도 됩니다(연락처
정보는 제품 보증서 참조).
호환성
- 여분 젖꼭지는 별도로 사용할 수 있습니다.
아기 (보기 ‚아기에게 맞는 젖꼭지
선택하기‘) 수유 시 올바른 유량의 젖꼭지를
사용하고 있는지 확인하십시오. 액세서리
또는 예비 부품을 구입하려면
www.shop.philips.com/service를
방문하거나 필립스 대리점에 문의하십시오.
또한 필립스 고객 상담실이나 필립스 서비스
센터에 문의하실 수 있습니다.
- 필립스 아벤트 소독기를 사용하는 경우 웹
사이트에서 내츄럴 젖병을 올바르게 놓는
방법을 확인하십시오.
- 고품질 플라스틱 내츄럴 젖병은
대부분의 필립스 아벤트 유축기, 스파우트,
밀봉 디스크 및 컵 덮개와 함께 사용할 수
있습니다.
- 내츄럴 유리 젖병은 필립스 아벤트 유축기
및 밀봉 디스크와 함께 사용할 수 있습니다.
안전한 사용을 위해 내츄럴 유리 젖병을
손잡이, 스파우트, 컵 덮개 및 스파우트와
함께 사용하지 않는 것이 좋습니다. 젖병을
떨어뜨리면 깨질 수 있습니다.