Philips SCF312-01 User Manual [en, es, fr]

Call TOLL-FREE: 1.800.54.AVENT

Llame gratuítamente: 1.800.54.AVENT

Appelez SANS FRAIS : 1.800.54.AVENT

This product is a personal care item and therefore cannot be returned once opened. If the pump is defective, we will gladly provide replacement parts or a possible exchange. If you experience any problems with this product, please telephone our toll-free helpline at 1.800.54.AVENT. Our representatives will be happy to assist you. Please do not return this item to the retailer.

Este producto es un artículo de cuidado personal y, por tanto, no puede ser devuelto una vez abierto. Si el extractor está defectuoso, con mucho gusto procederemos a su cambio. Si Ud tiene algún problema con este producto, por favor, llame a nuestro teléfono gratuíto de atención al cliente al

1.800.54.AVENT. Nuestros representantes estarán encantados de ayudarle. Por favor, no devuelva este producto al comerciante.

Pour des raisons d’hygiène, ce produit ne peut être retourné une fois l’emballage ouvert. Toutefois, si le tire-lait s’avère défectueux, nous nous ferons un plaisir de le remplacer. Si vous éprouvez des difficultés avec le produit, composez gratuitement le 1.800.54.AVENT. Un de nos représentants se fera un plaisir de vous aider. Veuillez ne pas retourner cet article au magasin.

www.philips.com/AVENT

USA: Philips Consumer Lifestyle, a Division of Philips Electronics North America Corporation, P.O. Box 10313, Stamford, CT 06904.

Canada: Philips Electronics Ltd, 281 Hillmount Road, Markham, ON L6C2S3

42133 5415 331

Single electronic breast pump Extractor Electrónico

Tire-lait Electronique Simple

Single Electronic Breast Pump Parts Guide

All you need to assemble and use your Philips AVENT single electronic breast pump is shown here. If any of the parts are missing, or if you have any questions, please call customer support at

1.800.54.AVENT or visit www.philips.com/AVENT.

Single Electronic Breast Pump Parts Guide – Detailed

Pump Parts

Bottle Parts

Control Handle

– adjusts the pumping suction, speed and pattern so that your single electronic breast pump can learn and then repeat

your rhythm after only 2 compressions.

Light

Power socket

One-touch Memory Control

– turns pump on and off and automates your pumping rhythm.

Control handle

NEVER SANITIZE OR IMMERSE IN WATER

Battery Pack

1x Control handle

1x Silicone diaphragm

with stem

1x White valve

1x Pump body

1x Milk container

(1x 4oz/125ml) / Adaptor ring

1x Stand (same as )

1x Let-down Massage

Cushion

1x Funnel cover

1x Battery pack

1x Wall plug cord

1x Dome cap

1x Extra soft, newborn

flow nipple

1x Screw ring

1x Sealing base

1x Sealing disc

(0m+)

(same as )

Power cable

Only the following batteries are compatible with the single electronic breast pump Battery Pack: Duracell (Standard Coppertop), Duracell Ultra Digital, Energizer, Energizer Max and Ansmann (NiMH). For Ansmann (NiMH) use/charge in accordance with manufacturer’s guidelines. Dispose of batteries as per manufacturer’s instructions.

NEVER SANITIZE OR IMMERSE IN WATER

Wall Plug Cord

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

IMPORTANT SAFEGUARDS

When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following.

READ ALL INSTRUCTIONS BEFORE USING YOUR PHILIPS AVENT SINGLE ELECTRONIC BREAST PUMP.

WARNING – To reduce the risk of fire, electrocution, or other personal injury:

The breast pump is intended for repeated use by a single user only.

•

• Always unplug from the electrical wall outlet immediately after use.

• Do not use while bathing.

• Do not place or store the product where it can fall or be

pulled into a tub or sink.

• Do not place or drop the control handle, battery pack or wall

plug cord into water or other liquids.

• Do not reach for a product that has fallen into water. Unplug

from the wall outlet immediately.

• Close supervision is necessary when this product is used near

children or persons with disabilities.

• Do not allow children or pets to play with the control handle,

battery pack, wall plug cord or accessories as these parts may pose a choking or strangulation danger.

• Before each use inspect the product, including wall plug cord,

for signs of damage. Never operate this product if it has a damaged cord or plug, if it is not working properly or if it has been dropped, damaged or submerged in water.

• Only use attachments recommended by Philips AVENT.

• Do not use outdoors or where aerosol spray products are

being used, or where oxygen is being administered.

• Equipment not suitable for use in the presence of flammable

anaesthetic mixture with air, or with oxygen or nitrous oxide.

• Only use the wall plug cord and battery pack supplied with

the product.

• There are no user serviceable parts inside the breast pump.

Do not attempt to open, service or repair the breast pump yourself.

• Keep cords away from heated surfaces.

• This product is a personal care item and should not be shared between mothers.

• Do not attempt to remove the pump body from your breast

while under vacuum. Turn the unit off and break the seal between your breast and the pump funnel with your finger, then remove the pump from your breast. Do not operate control handle unless connected to a pump body.

•

• Never use while pregnant, as pumping can induce labor.

• Never use when sleepy or drowsy.

CAUTION – To reduce the risks of injury, device malfunction or failure:

• The product should not be left unattended when plugged into an electrical outlet.

• Never drop or insert any foreign object into any opening.

• Make sure the voltage of the wall plug cord is compatible

with the power source.

• Plug the end of the wall plug cord into the control handle

first, then securely attach the wall plug into the outlet.

• Although compliant with applicable EMC directives, this equipment may still be susceptible to excessive emissions and/ or may interfere with more sensitive material.

• Wash and sanitize the appropriate pump parts before each use.

• Never put the control handle, battery pack or cord in water or

a sterilizer as you can cause permanent damage to the pump.

• Do not continue pumping for more than five minutes at a

time if no result is achieved.

• Do not use antibacterial or abrasive cleaners/detergents when

cleaning breast pump parts.

• If the pressure generated is uncomfortable or causing pain,

turn the unit off, break the seal between the breast and the pump body with your finger and remove the pump from your breast.

SAVE THESE INSTRUCTIONS

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Congratulations!

Soon you will discover what makes this Philips AVENT single electronic breast pump so uniquely yours. The breast pump is designed with an electronic memory that learns and continues your gentle pumping rhythm. It gives you complete control over your comfort, which means that pumping with your single electronic breast pump always feels natural and exactly right for you.

Let-down Massage Cushion has petals that flex

in and out, gently massaging the area around the areola. This is intended to simulate a baby’s feeding action and help stimulate a fast, natural milk flow.

One-touch Memory Control gives you instant

control over comfort, right at your fingertips. By changing the speed and intensity with which you pump, you can imitate your baby’s unique feeding pattern – fast and shallow at the beginning, followed by a slower and stronger rhythm as your milk flows.

Electronic Memory learns from you. Just begin a

comfortable pumping rhythm, press a button and the single electronic breast pump automates it.

Pump, Store, Feed Convenience from the Philips

AVENT natural feeding system. Products work together, so you never have to transfer milk between containers.

Ultra Comfortable, Quiet and Effective making

it easier for you to continue giving your baby the benefits of breast milk.

Please take a few minutes to read through this entire instruction leaflet before using your breast pump for the first time.

PLEASE SAVE THESE INSTRUCTIONS.

Unless advised otherwise by your health professional it is best to wait until your breastfeeding routine is established before expressing – usually around 4 weeks.

What’s Inside:

Pumping with your breast pump (Battery or Electric)

Single Electronic Breast Pump Parts Guide 1-2

Important Safeguards 3-4 Disassembling Your Electronic Pump 6 Cleaning and Sanitizing Your Pump 7 Preparing to Pump 8 Assembling the Pump Body 9-10 Connecting the Electronics 11-12 Pumping with Your Electronic

Breast Pump 13-15

Manual Pumping

Manual Breast Pump Parts Guide 16 Cleaning the Manual Breast Pump 16 Assembling the Manual Breast Pump 17-18 Using the Manual Breast Pump 19

Keeping Parts Clean and Compact for Travel 20

Storing Your Expressed Breast Milk 21 Technical Specifications 22 Limited Warranty 22 Troubleshooting Guide 23-24

Disassembling Your Electronic Pump

Before you use your breast pump for the first time and every time before use, you must disassemble, wash and sanitize as per ‘Cleaning and Sanitizing Your Pump’ on page 7.

Disassembly

If you have already used your breast pump, turn the pump off by pressing and holding down the

One-touch Memory Control until the light goes off. Unplug from the electrical wall outlet and disconnect the wall plug or battery pack cord from the control handle.

You can be quite firm when removing the control handle. First pull directly upwards away

from the diaphragm. Now unhook it from the stem by moving it towards the funnel.

Remove the funnel cover and gently pull the Let-down Massage Cushion away from the funnel.

Remove the silicone diaphragm and stem, unscrew the milk container and remove

the white valve.

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Cleaning and Sanitizing Your Pump

Clean with a Damp Cloth when Necessary:

NOT come into contact with your breast milk.

These components DO

Preparing to Pump

When using your single electronic breast pump for the first time, it will have retained factory settings stored in the memory as a result of quality control testing. If the One-Touch Memory Control is pressed prior to squeezing the control handle upon first use the pump will operate at these settings, which may or may not be comfortable for you. We recommend that prior to engaging the automatic mode, you establish a comfortable rhythm manually, then press the One-Touch Memory Control to continue your preferred rhythm. Using a breast pump takes practice. You may need to make several attempts before you succeed, but because your single electronic breast pump is so simple and comfortable to use, you will soon get used to expressing milk.

CAUTION: NEVER PUT THE CONTROL HANDLE, BATTERY PACK OR WALL PLUG CORD IN WATER OR A STERILIZER, AS YOU CAN CAUSE PERMANENT DAMAGE TO THE PUMP.

Disassemble and Clean Before Every Use (including first use):

Cleaning Instructions:

Before you use your breast pump for the first time and every time before use: Separate all parts, then wash in the dishwasher or in warm soapy water and rinse.

Do not use antibacterial or abrasive cleaners/detergents.

CAUTION: TAKE CARE WHEN CLEANING THE WHITE VALVE. IF IT GETS DAMAGED, YOUR BREAST PUMP WILL NOT FUNCTION PROPERLY. TO CLEAN THE WHITE VALVE, RUB IT GENTLY BETWEEN YOUR FINGERS IN WARM SOAPY WATER. DO NOT INSERT OBJECTS AS THIS MAY CAUSE DAMAGE.

1. Choose a quiet time when you’re not rushed and

unlikely to be disturbed.

2. Having your baby or a photograph of your baby

nearby can help encourage your milk to flow.

3. Warmth and relaxation can also help, so you might

like to try expressing after a warm bath or shower.

4. Placing a warm cloth on your breasts for a few

minutes before you start pumping can encourage your milk flow and soothe painful breasts.

Try expressing from one breast while your baby is feeding

from the other, or continue expressing just after a feed.

6. Repositioning the pump on your breast from time to

time can help stimulate your milk ducts.

To relieve engorgement, we recommend gentle, slow single pumping to relieve the pressure. Practice with your pump to find the best pumping techniques for you. Don’t worry if your milk doesn’t flow immediately, relax and continue pumping.

CAUTION: IF AFTER 5 MINUTES NO RESULT IS ACHIEVED, TRY AGAIN AT ANOTHER TIME OF DAY. IF YOU EXPERIENCE ANY PAIN IN THE BREAST AREA, STOP AND CONSULT YOUR HEALTH PROFESSIONAL OR BREASTFEEDING ADVISOR.

How much milk can you expect?

On average you will need to pump for 10 minutes to express 2-4ozs or 60-125mls of milk. However, this is just a guide and varies from woman to woman. If you find that you regularly express more than 4ozs/125mls of milk per session, attach a 9oz/260ml milk container to the pump body.

HELPFUL TIP!

The Philips AVENT steam sterilizers are designed to hold the washable components of the electronic breast pump and the entire manual Breast Pump.

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Assembling the Pump Body

Before assembling, make sure that your hands are clean and you have correctly washed and sanitized the pump (see ‘Cleaning and Sanitizing Your Pump’ on page 7). Also check that none of the pump components are damaged.

Parts you will need for steps 1-4:

Assembling the Pump Body

Fit the clear silicone diaphragm with stem into the pump body. Ensure a perfect seal around the

rim by pressing down with your fingers. (This is

easier if assembled while the diaphragm is wet).

Pump body

Let-down Massage Cushion White stand

White valve Silicone diaphragm with stem

Milk container

Insert the white valve into the pump body, so that it fits securely into the

small round hole. Make sure the pointed side of the valve is facing down.

Screw the pump body onto the milk container until securely in place.

To ensure that the pump is completely stable, you can use the stand with the 4oz/125ml milk container.

Insert the Let-down Massage Cushion and secure the rim around the funnel making sure

there are no gaps. Run your thumb on the flat surface between each petal to ensure there are no air pockets. (This is easier if assembled while

the Let-down Massage Cushion is wet).

ALWAYS insert the adaptor ring

when using a polypropylene bottle

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Connecting the Electronics

Parts you will need for steps 5-8:

For electric use connect the wall plug cord to the control handle and

plug into an electrical wall outlet.

Connecting the Electronics

Assembled Pump Body (see pages 9-10)

Wall Plug Cord

Control Handle

Battery Pack

Firmly push the control handle onto the pump body so that it sits securely

on top of the silicone diaphragm.

For battery use, open the top of the battery pack and insert 4 x AA

batteries. (For compatible batteries, see page 2).

Connect the power cord to the control handle.

HELPFUL TIP!

Batteries will last for approximately 6 hours. The light on the control handle will display a continuous RED pulsing flash to warn you when it is time to replace them. There will be enough power for approximately 1 more pumping session, with no drop-off in performance, before the pump switches itself off.

11 12

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Pumping with Your Electronic Breast Pump

Before you begin pumping, make sure that you have correctly washed, sanitized and assembled the pump. Consult the ‘Preparing to Pump’ section on page 8 for tips on stimulating let-down and milk flow. Wash your hands thoroughly and make sure your breasts are clean. Relax in a comfortable chair and lean slightly forward so that your milk flows easily down the pump funnel into the milk container (you can use cushions to support your back).

Turn on Pump: Connect the power cord to the control handle and plug into an electrical wall outlet if necessary.

Press and hold the One-Touch Memory Control until the light flashes ORANGE and you hear the pump turn on (this can take up to 5 seconds). Once the light turns a solid GREEN, the pump is ready to use.

If the light is flashing RED, refer to the ‘Troubleshooting Guide’ on page 23.

Create a Reliable Vacuum: Press the pump against your breast to form a complete seal, ensuring that your nipple

fits into the funnel. Check you have a reliable vacuum by compressing and releasing the control handle so you can feel suction.

Initiate Let-down: To encourage let-down, lightly press the handle in a way that feels comfortable and similar

to your baby’s initial rapid suckling action. The petals on the Let-down Massage Cushion will flex in and out around the areola, creating a massaging effect, similar to baby’s natural mouth and jaw movements during breastfeeding. You can choose to automate this let-down phase by pressing the One-touch Memory Control after two compressions (flashing GREEN light). Once your milk begins to flow, press the One-touch Memory Control to return to manual control (solid GREEN light)

CAUTION: LET-DOWN CAN OCCUR IMMEDIATELY, EVEN AFTER JUST A FEW STROKES AND SHOULD NOT LONGER THAN 5 MINUTES (REFER TO PREPARING TO PUMP ON PAGE 8).

Milk Expression: To create a natural and effective breast pumping rhythm that can be maintained for the rest of

your pumping session, compress the handle slowly and more fully (to increase the intensity of the suction), hold for 2-3 seconds and then slowly release. Once you are happy with the level of suction and rhythm, after two compressions, press the One-touch Memory Control and your Electronic Breast Pump will continue your personal pumping rhythm (flashing GREEN light).

TAKE

HELPFUL TIP!

Control Handle Light

Flashing ORANGE – Control Handle Setting Up

Solid GREEN – Motor Ready/Pump in Manual Control

Flashing GREEN – Pump in Automatic Mode

Flashing RED – Warning (see ‘Troubleshooting Guide’ on page 24)

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Note: You do not need to compress the handle fully, only until it feels comfortable. The further you compress the handle, the more suction the pump will provide. If the pressure is uncomfortable, stop the automated pumping by pressing the One-touch Memory Control and break the seal between your breast and pump funnel with your finger.

HELPFUL TIP!

Let-down is your body’s physiological response to on the breast. This stimulates nipple where it is available for baby.

Milk Expression occurs after let-down is achieved and milk begins to flow. It is the phase that is induced by the baby’s deeper more comfortable suckling rhythm.

the breast to produce milk and send it towards the

the suckling action of your baby

1413

Pumping with Your Electronic Breast Pump

Changing or Ending your Pumping Session:

To change your pumping rhythm at any time, press the One-touch Memory Control to revert to manual control (solid GREEN light). You can then set a new pattern by repeating Step 4.

To end your pumping session, press the One-touch Memory Control to revert to manual control (solid

GREEN light). Break the seal between your breast and

the pump funnel with your finger and remove the pump from your breast. Turn the pump off by pressing and holding the control button until the light goes off. Remove the plug from the electrical outlet if necessary, then remove the power cord from the control handle.

While the Manual Breast Pump uses many of the same parts as the Electronic Breast Pump, please note the parts shaded in green are specific to the Manual Breast Pump.

Parts specific to the Manual Breast Pump are included in a separate bag:

Clear pump cover

Forked handle

Manual Breast Pump – Parts Guide

Storing your milk: Make sure that you have not over-filled the milk

container and carefully unscrew it from the pump body. Add a sanitized screw ring and sealing disc to safely store your breast milk in the refrigerator or freezer.

Next time you turn your pump on: Resuming saved session? Even after your Electronic Breast

Pump is turned off, it will remember the last programmed

rhythm. If you have had a short break and your milk is still flowing, ensure you have a good seal against your breast, press the One-touch Memory Control and your pump will continue as before.

Need to re-establish let-down? If you need to re-establish let-down, refer to the beginning of ‘Pumping with Your Electronic Breast Pump’ on page 13.

CONSULT THE GUIDELINES FOR STORING EXPRESSED BREAST MILK ON PAGE 21

Manual Breast Pump

Cleaning the Manual Breast Pump

CAUTION: DO NOT USE ANTIBACTERIAL OR ABRASIVE CLEANERS/ DETERGENTS. TO CLEAN THE VALVE, RUB GENTLY BETWEEN YOUR FINGERS IN WARM SOAPY WATER – DO NOT INSERT OBJECTS AS THIS MAY CAUSE DAMAGE.

Every time before use (including first use): Disassemble and clean all parts of the Manual Breast Pump on the top

rack of the dishwasher, or in warm soapy water and rinse. All parts of the Manual Pump are sterilizer safe. Sanitize your Manual Pump in a steam sterilizer, or by boiling in water for 5 minutes.

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Assembling the Manual Breast Pump

Before assembling, make sure that your hands are clean and you have correctly washed and sanitized the pump (see ‘Cleaning the Manual Breast Pump’ on page 16). Also check that none of the pump components are damaged.

Assembling the Manual Breast Pump

Insert the white valve into the pump body so that it fits securely into the small round hole. Make

sure the pointed side of the valve is facing down.

Fit the silicone diaphragm with stem into the pump body. Ensure a perfect seal around the

rim by pressing down with your fingers. (This is

easier if assembled while the diaphragm is we

Screw the pump body onto the milk container until securely in place.

Insert the Let-down Massage Cushion and secure the rim around the funnel making sure there

are no gaps. Run your thumb on the flat surface between each petal to ensure there are no air pockets. (This is easier if assembled while the

Let-down Massage Cushion is wet).

Place the forked end of the handle under the rounded tip of the diaphragm stem.

Push down gently on the handle until it

t).

clicks into place.

Click the pump cover onto the pump body.

To ensure that the pump is completely stable, you can use the stand with the 4oz/125ml milk container.

white stand

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

ALWAYS insert the adaptor ring when using a polypropylene bottle

Using the Manual Breast Pump

Before you begin pumping, make sure that you have correctly washed, sanitized and assembled the Manual Breast Pump. Consult the ‘Preparing to Pump’ section on page 8 for tips on stimulating letdown and milk flow. Wash your hands thoroughly and make sure your breasts are clean. Relax in a comfortable chair and lean slightly forward so that your milk flows easily down the pump funnel into the milk container (you can use cushions to support your back).

Create a Reliable Vacuum: Press the pump against your breast to form a complete seal, ensuring that your

nipple fits into the funnel. Check you have a reliable vacuum by compressing and releasing the control handle so you can feel suction.

Initiate Let-Down: To encourage let-down, lightly press the handle in a way that feels comfortable and similar

to your baby’s initial rapid suckling action.

CAUTION: LET-DOWN CAN OCCUR IMMEDIATELY, EVEN AFTER JUST A FEW STROKES AND SHOULD NOT TAKE LONGER THAN 5 MINUTES (REFER TO PREPARING TO PUMP ON PAGE 8).

Keeping Parts Clean & Compact for Travel

Pump

Breast Milk Storage Container

After sanitizing all parts, click the

sealing disc into the screw ring

and twist onto the container.

After sanitizing all parts insert the white valve and fit the diaphragm with stem onto the pump body. Clip the funnel cover over the Let-down Massage Cushion and screw the sealing base onto the bottom of the pump body.

Milk Expression: To create a natural and effective breast pumping rhythm that can be maintained for the rest of

your pumping session, compress the handle slowly and more fully (to increase the intensity of the suction), hold for 2-3 seconds and then slowly release.

Note: You do not need to compress the handle fully, only until it feels comfortable. The further you compress the handle, the more suction the pump will provide.

Storing your milk: Make sure that you have not overfilled the milk container and carefully unscrew it from

the pump body. Add a sanitized screw ring and sealing disc to safely store your breast milk in the refrigerator or freezer.

CONSULT THE GUIDELINES FOR STORING EXPRESSED BREAST MILK ON PAGE 21

AVENT Naturally Shaped Nipple

After sanitizing all parts, insert the

nipple into the screw ring and attach

the dome cap over the top of the

nipple. Screw on the sealing base.

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

2019

Storing Your Expressed Breast Milk

Technical Specifications

Using Philips AVENT products interchangeably,

you can pump, store and feed with the same

container, preserving valuable nutrients that

can get lost if breast milk is transferred.

After expressing milk into an Philips AVENT container, click a sealing disc into the screw ring and twist onto the container. To feed, just replace the sealing disc with a Philips AVENT naturally shaped nipple.

ALWAYS insert the adaptor ring when using a polypropylene bottle.

Guidelines for Storing Expressed Breast Milk

Breast milk can be stored in the fridge or freezer in either sterile Philips AVENT breast milk containers (4oz/125ml or 9oz/260ml fitted with sealing discs) or in pre-sterilized VIA cups.

Do not overfill the milk container and be sure to keep it upright.

Expressed milk should be refrigerated immediately. Only milk collected with a sterile pump should be

stored to be fed to your baby. Expressed breast milk can be stored in the refrigerator for up to 24 hours (not in the door),

the freezer for up to 3 months or 6 months in a zero-degree freezer. If you are storing freshly expressed milk in the fridge to add to during the day, only add milk which

has been expressed into a sterile container. Milk can only be kept like this for a maximum of 24 hours from first expression, after which it must be used immediately or frozen for future use.

Frozen breast milk can be defrosted overnight in the refrigerator, heated gradually in warm water or heated on the lowest setting of the Philips AVENT bottle and baby food warmer.

Note:

• NEVER refreeze breast milk.

• DO NOT add fresh breast milk to already frozen milk.

• ALWAYS discard any milk that is left over at the end of a feed.

CAUTION: NEVER IMMERSE A FROZEN BOTTLE OR CUP IN BOILING WATER AS THIS MAY CAUSE IT TO CRACK/SPLIT.

Key to Control Handle Symbols

TYPE B APPLIED PART GENERAL WARNING

ETL LISTED MARK – CANADA/UNITED STATES

LISTED

3045297

Technical Specifications

• Mains Input Voltage 100 – 240 VAC

• Mains Input Frequency 50 – 60 Hz

• Supply voltage fluctuations not exceeding +/- 10% of the nominal voltage

• Ambient Temperature range: +10˚C to +40˚C

FOR INDOOR USE ONLY

• Atmospheric Pressure: 700 to 1060hPa

• Equipment rated for continuous operation

• Maximum speed at maximum vacuum is 60 cycles per minute

FOLLOW OPERATING INSTRUCTIONS

CLASS II EQUIPMENT

FULL TWO-YEAR WARRANTY

Philips Electronics North America Corporation (USA) and Philips Electronics Ltd (CANADA) warrant each new Philips AVENT product, model (SCF312/01) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, or the affixing of any attachment not provided with the product. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

In order to obtain warranty service, simply call toll-free 1.800.54.AVENT.

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

+ 27 hidden pages