Philips SCF285 User Manual

Call FREE on 0800 289 064

Teл. 8-800-200-0883

0 801 35 37 37

06 1 363 2903

8 044 501 19 90

+4 021 3172505

Numéro Vert 0800 90 81 54 (France seulement)

(+971) 800AVENT

0216- 573 62 00

+98-21-82430

+386 1548 4300

286 854 411 3

080-628-8800

Philips AVENT, a business of Philips Electronics UK Ltd. Philips Centre, Guildford Business Park, Guildford, Surrey, GU2 8XH

www.philips.com/AVENT

42133 5435 220

Philips AVENT Electric Bottle and Baby Food Warmer

GB GB

Please take 5 minutes to read through the whole of this leaflet before you use your Electric Bottle and Baby Food Warmer for the first time and retain for future reference.

The Electric Bottle and Baby Food Warmer allows you to warm all AVENT Feeding Bottles as well as baby food jars and tins safely and quickly. The Electric Bottle and Baby Food Warmer isn’t meant for keeping liquid or food warm as vitamins can be destroyed.

The speed at which the warmer heats the milk or food depends on the size of the bottle or container and the starting temperature of the milk or food (e.g. room temperature 20°C or out of fridge 5°C). Diagram 2 gives an indication of approximate warming time. Always test the temperature before feeding.

The following guidelines are the approximate temperature the water

container can reach. This is not a heating guide

for liquid or food!

Setting Approximate water* temperature

1 35 – 45 °C 2 45 – 75 °C 3 75 – 85 °C

Contents

a) Basket b) Warmer body c) Dial

Instructions for Use

For AVENT Feeding Bottles

1) Ensure basket is in place inside the warmer.

2) Place the assembled, filled bottle in the warmer.

3) For 125ml/4oz Bottles, fill the warmer with water to just above the level of milk in the bottle.

4) For larger AVENT Bottles (260ml/9oz), fill the warmer to 15mm (1/2 inch) below the rim of the warmer.

5) Never let the water level rise above the neck of the bottle or spill over the edge of the warmer.

6) Plug in the unit and switch on at the mains. Turn the dial to setting 3.

7) The light will illuminate to indicate the warmer is working.

* surrounding the

surrounding the container

8) During the warming process, the light will come on and off to indicate that the water surrounding the bottle is being heated to the maximum temperature of the setting.

9) Always test the feed and when it has reached the required temperature, remove immediately.

10) Shake the bottle gently and check the temperature of the milk by sprinkling a few drops on to your wrist before you feed your baby.

11) Take care not to overheat the milk.

NB: please refer to the timings in Diagram 2. NB: The basket can be removed when heating the AVENT Magic Cup and other makes of bottles.

For baby food jars and tins

1) Ensure basket is in place inside the warmer.

2) Remove the lid and place jar or tin in the warmer.

3) Fill the warmer with water to 15 mm (1/2 inch) below the top of the jar/tin.

4) Plug in the unit and switch on at the mains. Turn the dial to setting 3.

5) Continue as 7-9 above.

6) The warmer will work in the same way as for feeding bottles. Take care when removing the jar or tin as they, and the water surrounding them, will be hot.

7) For small jars/tins you may find it beneficial to place a screw ring from an AVENT Bottle below the jar/tin before adding the water in order to remove the container easily.

8) Stir the food and test it on a spoon yourself to ensure it is not too hot for your baby.

9) Take care not to overheat the feed.

NB: please refer to the timings in Diagram 2.

Care of your warmer

Unplug and allow to cool before cleaning. Remove basket and wipe inside and outside with a damp cloth only, this will keep the warmer looking new. DO NOT

USE AN ABRASIVE CLEANER. It may be advantageous

to use pre-boiled or filtered water in your warmer in order to reduce limescale build up.

De-scaling

You should de-scale your Electric Bottle and Baby Food Warmer every four weeks to ensure it continues to work 100 % effectively.

EITHER:

Mix one sachet of citric acid (10g) with 200ml/7oz of water. Ensure basket is in place and pour solution into warmer. Heat for 10 minutes on setting 3. After 10 minutes, switch off by unplugging from the wall and leave to stand for 30 minutes. Pour the solution away and rinse the warmer with tap water. Citric acid is available from most chemists and through Philips AVENT Customer Service.

Pour 50ml/2oz of vinegar (white) mixed with 100ml/4oz of cold water into the warmer (with basket in place). Allow to stand in the unit until any limescale has dissolved. Empty the unit and rinse thoroughly.

Warning!

The Electric Bottle and Baby Food Warmer is fitted with a non-rewireable moulded plug. The mains supply cord of the appliance CANNOT be replaced. If the cord is damaged, the appliance should be discarded.

The lead supplied must not be used on any other appliance and no other lead should be used with the Electric Bottle and Baby Food Warmer.

This product is manufactured to comply with the Radio Interference Requirements and the EEC Directive 89/336/EEC.

• Wheninusethewarmercontainshotwater.

• Alwaysplacecontainerintowarmerbefore

adding water.

• Ensurewaterhasbeenaddedbefore switching the unit on.

• Ifthefeedisleftinthewarmer,thetemperature will continue to increase as the thermostat cuts in/out whilst connected to the electric mains.

• Alwaystestthefeedandwhenithasreached the required temperature, remove immediately.

• Alwaysunplugfromthesocketaftereach use to switch the bottle warmer off.

• NEVER IMMERSE IN WATER.

• Thisapplianceisintendedforusebyresponsible

persons, keep out of the reach of small children and the infirm.

• Thisapplianceisnotintendedforusebypersons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Childrenshouldbesupervisedtoensurethatthey

do not play with the appliance.

For your child’s safety and health Warning!

Before first use, clean the product. Dishwasher safe. Sterilise using a Philips AVENT Steam Steriliser or boil for 5 minutes. Before each use, inspect the product. Throw away at the first sign of damage or weakness. Do not leave in sunlight when not in use or for longer than recommended in heat or sterilising solution, as this may weaken the product. Always use this product with adult supervision. Always check food temperature before feeding.

Guarantee

Philips AVENT guarantees that should the Electric Bottle and Baby Food Warmer become faulty during 24 months from the date of purchase, it will be replaced free of charge during this time. Please return it to the retailer where it was purchased. Please keep your receipt as a proof of purchase, together with a note of when and where purchased. For the guarantee to be valid, please note:

• TheElectricBottleandBabyFoodWarmermustbe

used according to the instructions in this leaflet and connected to a suitable electricity supply.

• Theclaimmustnotbearesultofaccident, misuse, dirt, neglect or fair wear and tear.

This does not affect your statutory rights.

Philips AVENT is here to help

GB:

Call FREE on

IRL:

Call FREE on

AU: 1 300 364 474

www.philips.com/AVENT

0800 289 064 1800 509 021

Электрический подогреватель бутылочек

RU RU

и детского питания Philips AVENT

PL PL

+ 11 hidden pages