Philips SC198X User Manual [uk]

4222_100_3961_1_FrontCover_A5_fc.pdf 1 03-07-15 14:53

Lumea

SC198X

21 3

7 6

English 4

Қазақша 26 Русский 49 Українська 77

English

Welcome

Welcome to the beauty world of Lumea! You are only a few weeks away from silky-smooth skin.

Philips Lumea uses Intense Pulsed Light (IPL) technology, known as one of the most effective methods to continuously prevent hair regrowth. In close collaboration with skin experts we adapted this light-based technology, originally used in professional beauty salons, for easy and effective use in the safety of your home. Philips Lumea is gentle and offers convenient and effective treatment at a light intensity that you find comfortable. Unwanted hairs are finally a thing of the past. Enjoy the feeling of being hair-free and look and feel amazing every day.

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. For further information, please go to www.philips.com/lumea to find our experts' advice, tutorial videos and FAQs and make the most of your Lumea.

Device overview

1 Light exit window with integrated UV filter 2 Integrated safety system 3 Skin tone sensor 4 Flash button 5 On/off button 6 Intensity lights (1-5) 7 'Ready to flash' light 8 Device socket 9 Adapter 10 Small plug

English

Who should not use Lumea? Contraindica tions

Never use the device if you have skin type V and VI (You rarely to never sunburn, very dark tanning). In this case you run a high risk of developing skin reactions, such as hyperpigmentation and hypopigmentation, strong redness or burns.

Never use the device if you are pregnant or breast feeding as the device was not tested on pregnant or breast feeding women.

Never use the device if you suffer from any of the diseases listed below:

If you have a skin disease such as active skin cancer, you have a history of skin cancer or any other localized cancer in the areas to be treated.

If you have pre-cancerous lesions or multiple atypical moles in the areas to be treated.

If you have a history of collagen disorder, including a history of keloid scar formation or a history of poor wound healing.

If you have a history of vascular disorder, such as the presence of varicose veins or vascular ectasia in the areas to be treated.

If your skin is sensitive to light and easily develops a rash or an allergic reaction.

English

If you have infections, eczema, burns, inflammation of hair follicles, open lacerations, abrasions, herpes simplex, wounds or lesions and haematomas in the areas to be treated.

If you have had surgery in the areas to be treatedin the last three weeks.

If you have epilepsy with flashlight sensitivity.

If you have diabetes, lupus erythematodes, porphyria or congestive heart disease.

If you have any bleeding disorder.

If you have a history of immunosuppressive disease (including HIV infection or AIDS)

If you have received radiation therapy or chemotherapy within the past 3 months.

Never use the device if you take any of the medications listed below:

If your skin is currently being treated with or has recently been treated in the past week with Alpha-Hydroxy Acids (AHAs), BetaHydroxy Acids (BHAs), topical isotretinoin and azelaic acid.

If you have taken any form of isotretinoin Accutane or Roaccutane in the last six months. This treatment can make skin more susceptible to tears, wounds and irritations.

If you are on painkillers which reduce the skin's sensitivity to heat.

If you are taking photosensitising agents or medications, check the package insert of your medicine and never use the device if it is stated that it can cause photo-allergic reactions, photo-toxic reactions or if you have to avoid sun when taking this medicine.

English

If you take anticoagulation medications, including heavy use of aspirin, in a manner which does not allow for a minimum 1-week washout period prior to each treatment.

If you take immunosuppressive medications.

Never use the device on the following areas:

Around the eyes and near the eyebrows.

On nipples, areolas, labia minora, vagina, anus and the inside of the nostrils and ears.

Men must not use it on the scrotum and face.

Over or near anything artificial like silicone implants, pacemakers, subcutaneous injection ports (insulin dispenser) or piercings.

On moles, freckles, large veins, darker pigmented areas, scars, skin anomalies without consulting your doctor. This can result in a burn and a change in skincolor, which makes it potentially harder to identify skin-related diseases.

On warts, tattoos or permanent make-up. This can result in a burn and a change in skin color.

On areas, where you use long-lasting deodorants. This can result in skin reactions.

Never use the device on sunburned, recently tanned or fake-tanned skin.

Note: This list is not exhaustive. If you are not sure whether you can use the device, we advise you to consult a doctor.

English

Important

Danger

Warning

Keep the device and the adapter dry.

If the device is broken, do not touch any inner part to avoid electric shock.

Never insert any objects into the device.

This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the device.

The device is not intended for children under the age of 15 years. Teenagers aged between 15 and 18 years can use the device with the consent and/or assistance of their parents or the persons who have parental authority over them.Adults of 18 years and older can use the device freely.

Always check the device before you use it. Do not use the device or adapter if it is damaged. Always replace a damaged part with one of the original type.

The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation.

Do not use the device if the UV filter of the light exit window is broken.

Caution

This device is not washable. Never immerse the device in water and do not rinse it under the tap.

For hygienic reasons, the device should only be used by one person.

Use the device only at settings suitable for your skin type. Use at higher settings than those recommended can increase the risk of skin reactions and side effects.

Only use the device for its intended purpose as shown in the user manual.

Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the device.

Always return the device to a service centre authorised by Philips for examination or repair. Repair by unqualified people could cause an extremelyhazardous situation for the user.

Electromagnetic fields (EMF)

This Philips device complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

English

How IPL works

With IPL technology, gentle pulses of light are applied to the skin and absorbed by the hairroot. The darker the hair, the better the pulses of light are absorbed.

The pulses of light stimulate the hair follicle to go into a resting phase. As a consequence, the hair sheds naturally and hair regrowth is prevented, leaving your skin continuously silky-smooth.

The cycle of hair growth consists of different phases. IPL technology is only effective when the hair is in its growing phase.Not all hairs are in the growing phase at the same time. This is why we recommend an 8-week treatment schedule followed by touch-ups to make sure all hairs are effectively treated in the growing phase.

Note: Treatment with Lumea is not effective if you have light blond, blond as light hairs do not absorb enough light. Below you can see the hair colors for which Lumea is suitable and effective.

Suitable body hair colors

What to expect

Immediately after the 1st treatment

Afterthe first treatment, it can take 1 to 2 weeks for the hairs to fall out. In the first weeks following the initial treatments, you still see some hairs growing.These are likely to be hairs that were not in their growing phase during the first treatments.

After 2-3 treatments

After 2-3 treatments, you should see a noticeable reduction in hair growth. However, to effectively treat all hairs, it is important to keep on treating according to the recommended treatment schedule.

After 4-5 treatments

After 4-5 treatments, you should see a significant reduction of hair growth in the areas that you treated with Lumea. A reduction of hair density should be visible as well. Keep on treating with frequent touch-ups (every 4-8 weeks)to maintain the result.

English

Tanning advice

Tanning with natural or artificial sunlight

Intentionally exposing your skin to natural or artificial sunlight with the aim of developing a tan influences the sensitivity and color of your skin. Therefore the following is important:

English

After each treatment, wait at least 48 hours before tanning. Even after 48 hours, make sure that the treated skin does not show any redness from the treatment anymore.

In case of exposing your skin to the sun (without tanning intentionally) in the 48 hours after treatment, use a sunblock SPF 50+ on the treated areas. After this period, you can use a sunblock SPF 30+ for two weeks.

After tanning, wait at least 2 weeks before you use Lumea. Perform a skin test to determine the appropriate light intensity setting.

Do not use Lumea on sunburned body areas.

Note: Occasional and indirect sun exposure does not qualify as tanning.

Tanning with creams

If you have used an artificial tanning lotion, wait until the artificial tan has disappeared completely before you use the device.

Before you use your Lumea

Pretreating your skin

Before you use Lumea, you should pretreat your skinby removing hairs on the surface of your skin. This allows the light to beabsorbed by the hair parts below the skin surface to ensure effective treatment. You can either shave, short-trim, epilate or wax. Do not use depilatory creams, as chemicals may cause skin reactions.

Skin test

English

If you chose to wax, please wait 24 hours before using Lumea to let your skin rest.We recommend that you take a shower before the treatment to ensure that all possible residue of wax has been removed from your skin.

1 Pretreat the areas you intend to treat with

Lumea.

2 Clean your skin and make sure it is hair-free,

entirely dry and free from oily substances.

Note: Once the hairs stop growing back, which usually happens after 4-5 treatments, you no longer have to pretreat your skin before you use the device.

When you use Lumea for the first time or after recent tanning, perform a skin test on each area to be treated. The skin test is necessary to check your skin's reaction to the treatment and to determine the correct light intensity setting for each bodyarea.

1 Choose an area close to the area you intend to

treat.

2 Turn on the device. Make sure you select

setting 1.

3 Put the device against your skin and press the

flash button to release a flash.

4 Slide the device over the skin to the next area

to be treated.

5 Increase the setting by one level, apply a flash

and slide the device to the next area. Repeat this for all levels within the recommended range for your skin type.

English

6 After the skin test, wait 24 hours and check your

skin for any reaction. If your skin shows reactions, choose the highest setting that did not result in any skin reaction for subsequent use.

Using your Philips Lumea

Skin tone sensor

For extra safety, the integrated skin tone sensor measures the skin tone at the beginning of each session and occasionally during the session. If it detects a skin tone that is too dark for treatment with Lumea,the 'ready to flash' light starts blinking orange rapidly and the device automatically disables to prevent you from developing skin reactions. This means that it does not emit pulses when you press the flash button.

Selecting the right light intensity

Lumea provides 5 different light intensities. Depending on your skin type and light intensity level you find comfortable, you can select the right light intensity setting.

1 Consult the table below to select the right

setting.

2 To adjust the light intensity setting, press the

on/off button one or more times until you have reached the required setting. The corresponding intensity light lights up green.

English

Note: Thedevice automatically disables when your skin tone is too dark, to prevent you from developing skin reactions. The integrated skin tone sensor does not tell you which light intensity setting to use, as Philips Lumea gives you the freedom to select the light intensity that you find most convenient.

3 Lumea should never be painful. If you

experience discomfort, reduce the light intensity setting.

4 After recent tanning, perform a skin test to

determine the right light intensity setting.

Skin type Skin tone Light intensity setting

I White: you always

sunburn, never tan.

II Beige: you easily

sunburn, tan minimally.

III Light brown: you

sunburn easily, tan slowlyto light brown.

IV Mid brown: youou

rarely sunburn, tan easily.

V Dark brown: you

rarely sunburn, tan very easily.

VI Brownish black or

darker: you rarelyornever sunburn, very dark tanning.

4/5

3/4

1/2/3

You cannot use the device

90º

English

Note:Your skin may react differently on different days/occasions for a number of reasons.

Handling the device

1 Before use, clean the light exit window. 2 Put the small plug in the device and put the

adapter in the wall socket.

3 Switch on the device and select the right light

intensity for your skin tone.

4 Place the device at a 90° angle on the skin so

that the integrated safety system is in contact with your skin.

The integrated safety system prevents unintentional flashingwithout skin contact.

5 Press the devicefirmly onto your skin to

ensureproper skin contact. The device then automatically performs a skin tone analysis and the'ready to flash' light blinks orange slowlyto indicate that you can proceed with the treatment.

Note: When the ‘ready to flash’ light starts blinking suitable for treatment. In this case, the device automatically disables. You can try to use the device on other areas with a lighter skin tone.

orange rapidly, your skin is not

English

Note: If the 'ready to flash' light lights up orange continuously the device is not completely in contact with your skin.

TIP: If you use Lumea on your bikini area and want to leave some hair in place, make sure that the skin tone sensor is not placed on the remaining hair during the treatment, as this can cause the device to block

6 Press the flash button to release a flash.The

devices makes a soft popping sound. You should feel a warm sensation because of the flash.

Note: The light produced by the device is harmless to your eyes. It is not necessary to wear goggles during use. Use the device in a well-lit roomso that the light is less glaring to your eyes.

7 Place the device on the next area to be treated.

After each flash, it takes up to 3.5 seconds until the device is ready to flash again. You can release a flash when the 'ready to flash' light lights up again.

8 To make sure that you have treated all areas,

release the flashes close to each other. Effective light only comes out of the light exit window, therefore there should be some overlap.However, make sure you flash the same area only once. Flashing the same area twice doesn't improve the effectiveness of the treatment, but increases the risk of skin reactions.

9 When you have finished the treatment, press

and hold the on/off button for 2 seconds to switch off the device.

English

Two treatment modes: Stamp & Flash and Slide & Flash

YourPhilips Lumea has two treatment modes for more convenient use on different body areas:

The Stamp & Flash mode is ideal to treat small orcurvy areas like knees and underarms. Simply press and releasethe flash button to release a single flash.

The Slide & Flash mode offers convenient use on larger areas like legs. Keep the flash button pressed while you slide the device over your skinto release several flashes in a row.

Recommended treatment schedule

For the first 4 to 5 treatments, we advise you to use Philips Lumea once every two weeks to ensure that all hairs are treated.

Touch-up phase

After the initial treatment phase (4-5 treatments), we recommend touch-ups every 4 to 8 weeks,when you see hairs growing back. This is to maintain results and enjoy smooth skin for months.The time between treatments may vary based on your individual hair regrowth and also across different body areas.

Treatment time per area

11 min.

1,5 min.

6 min.

19 min.

2,5 min.

English

SC1985 is 40% faster than SC1984, SC1983 and offers you shorter treatment times.

English

After use

Common skin reactions

Your skin may show slight redness and/or may prickle, tingle or feel warm. This reaction is absolutely harmless and disappears quickly.

Dry skin and itching may occur due to shaving or a combination of shaving and light treatment. You can cool the area with an ice pack or a wet face cloth. If dryness persists, you can apply a nonscented moisturizer on the treated area 24 hours after the treatment.

Aftercare

After use, you can safely apply lotions, creams, deodorant, moisturizer or cosmetics to the treated areas. If you experience skin irritation or skin redness after treatment, wait until it disappears before applying any product to your skin. If you experience skin irritation after applying a product to your skin, wash it off with water.

Cleaning & storage

1 After use, switch off the device, unplug it and let

it cool down.

2 Moisten a soft cloth with a few drops of water

and use it to clean the following parts:

the light exit window

the skin tone sensor

3 Store the device in a dust-free and dry place at

a temperature between 0 °C and 60 °C.

English

Guarantee and support

If you need information or support, please visit www.philips.com/support or read the separate worldwide guarantee leaflet.

Recycling

This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).

Follow your country's rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Technical specifications

 SC198X

Rated voltage

Rated frequency

Rated input 36W

Protection against electric shock

Protections rating

100V-240V

50Hz-60Hz

Class II

IP 30 (EN 60529)

English

Operating conditions

 Relative humidity: 30% to 75%

Spectrum >475nm

Temperature:+10 ºC to 35°C



Troubleshooting

This chapter summarizes the most common problems you could encounter with the device. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Center in your country.

Problem Possible cause Solution

The device/adapter becomes warm during use

When I place the device on theskin, it does not release a flash. The 'ready to flash' light blinks orangerapidly.

This is normal. No action required.

Your skin tone in the area to be treated is too dark.

Treat other body areas with lighter skin tones with Lumea.

Problem Possible cause Solution

English

The 'ready to flash' light doesn't light up when I place the attachment on my skin, but the cooling fan works.

The 'ready to flash' lightblinks orange slowly but the device does not produce a flash when I press the flash button.

I cannot increase or decrease the light intensity settings/The intensity lights and the 'ready to flash' light are all on.

The device produces a strange smell.

The overheat protection has been activated.

The device needs to be reset.

The light exit window or the skin tone sensor is dirty.

You have not removed the hairs on the area to be treated properly. These hairs may get burned and can cause the smell.

When the overheat protection has been activated, the fan still works. Do not switch off the device, but let it cool down for approx.15 minutes before you continue to use it.

To reset the device, switch it off and switch it on again.

Clean thelight exit window and the skin tone sensorcarefully.

Pretreat your skin before you use Lumea.

English

Problem Possible cause Solution

The skin feels more sensitive than usual during treatment/I experience an unacceptable pain sensation when I use the device.

The skin reaction after treatment lasts longer than usual.

The light intensity setting you use is too high.

You did not remove the hairs on the areas to be treated.

The UV filter of the light exit window is broken.

You treated an area for which the device is not intended.

You have used a light intensity setting which is too high for you.

Check if you have selected the right light intensity setting. If necessary, select a lower setting.

Pretreat your skin before you use Lumea.

If the UV filter is broken, do not use the device anymore. Contact the Consumer Care Center in your country, your Philips dealer or a Philips service center.

Never use the device on the following areas: inner labia, anus, nipples, areolas, lips,inside the nostrils and ears, around the eyes and near the eyebrows. Men must not use it on the face, neckor on the scrotum.

Select a lower intensity next time.Seechapter 'Using your Philips Lumea', section 'Selecting the right light intensity'.

Problem Possible cause Solution

English

The results of the treatment are not satisfactory.



You have used a light intensity setting which is too low for you.

You did not flash an area adjacent to an area you treated before.

The device is not effective on your body hair color.

You do not use the device as often as recommended.

You respond more slowly to IPL treatment.



Select a higher setting next time.

You have to release the flashes close to each other.

If you have light blond, grey, or red hair, the treatment is not effective.

To remove all hairs successfully, we advise you to follow the recommended treatment schedule. You can reduce the time between treatments, but do not treat more often than once every two weeks.

Continue using the device for at least 6 months, as hair regrowth can still decrease over the course of this period.

Қазақша

Қош к

елдіңіз

Lumea сұлулық әлеміне қош келдіңіз! Нәзік теріге бірнеше апта ғана қалды.

Philips Lumea жүйесінде түктің қайта өсуін үздіксіз бақылайтын өте тиімді әдістердің бірі ретінде белгілі қарқынды импульсті жарық шығару (IPL) технологиясы пайдаланылады. Тері мамандарымен іскерлесе келе үй қауіпсіздігінде оңай және тиімді пайдалануға арналған кәсіби сұлулық салондарында пайдаланылатын осы жарық негізіндегі технологияға бейімдедік. Philips Lumea жеңіл және ыңғайлы әрі жарық қарқынында үйлесімді және тиімді өңдеу жолын ұсынады. Қажетсіз түктер ақырында керек болмайды. Түксіз болып сезініп, әрбір күнді керемет қарсы алыңыз.

Philips ұсынатын қолдауды толығымен рахатыңызға қолдану үшін, өзіңіздің өніміңізді www.philips.com/welcome бойынша тіркеуге отырғызыңыз. Қосымша ақпаратты, мамандар кеңесін, оқыту бейнелерін алу үшін

www.philips.com/lumea торабына өтіңіз және Lumea жүйесін жаңартыңыз.

Құрылғыға шолу

1 Біріктірілген UV сүзгісі бар жарық шығару

терезесі

2 Тұтас қауіпсіздік жүйесі 3 Тері реңкінің датчигі 4 Жарық түймесі 5 Қосу/өшіру түймесі 6 Қарқындылық жарықтары (1-5) 7 «Дайын» жарығы 8 Құрылғы розеткасы 9 Адаптер 10 Шағын аша

Қа

зақша

Қазақша

Lumea құрылғысын кім пайдаланбауы керек? Қолдануға болмайтын жағдайлар

Егер тері түрі V және VI болса, құрылғыны пайдаланбаңыз (Мүлдем күнге күймейсіз, өте қара түске қараясыз). Бұндай жағдайда гипопигменттеу, гиперпигменттеу, қатты қызылдану немесе күйіктер сияқты тері реакцияларының даму қаупі бар.

Егер жүкті немесе емізулі болсаңыз, құрылғыны ешқашан пайдаланбаңыз, себебі құрылғы жүкті немесе емізулі әйелдерде сыналмаған.

Егер төменде берілген аурулардың біреуімен ауырсаңыз, құрылғыны ешқашан пайдаланбаңыз:

Сізде тері обыры сияқты тері ауруы болса, түкті алу аумақтарында тері обыры немесе қандайда бір жергілікті ісік ауруы болғанда.

сіздегі түкті алу аумақтарында обырға дейінгі жарақаттар немесе бірнеше дақ болғанда;

коллагеноз бұзылуы, соның ішінде күйік тыртығы немесе нашар жазылған жаралар болғанда;

түк алынатын тұстарда варикоздық көк тамыр болғанда немесе тамыр кеңеюі сияқты тамыр аурулары болғанда;

теріңіз жарыққа сезімтал болып, қауіпті не аллергиялық реакция оңай берілгенде;

Қазақша

түк алынатын тұстарда жұқпалы жара, экзема, күйік, түк фолликулаларының қабынуы, ашық жарақаттар, сызат, асқынған ұшық, жара немесе жарақат және гематома болғанда;

түк алынатын аумақтарға соңғы үш аптадаоперация жасалғанда;

жарық сезімталдығымен талма ауруы болғанда;

қант диабеті, тері туберкулезі, порфирия немесе қан ұйыған жүрек ауруларында;

қан айналымыңыз дұрыс болмағанда;

иммуносуппрессорлық аурумен (оның ішінде АИВ немесе ЖИТС) ауырғаныңызда).

соңғы 3 айда сәулелі терапиялық немесе химиотерапиялық ем қабылдасаңыз.

Егер төменде берілген дәрілердің біреуін қабылдап жүрсеңіз, құрылғыны ешқашан пайдаланбаңыз:

теріңізге соңғы аптада альфагидроқышқыл (АГҚ), бетагидроқышқыл (БГҚ), жергілікті

изотретиноин және азелаинды қышқыл қолданылып жатқанда немесе қолданылғанда;

соңғы алты айда Accutane немесе Roaccutance изотретиноинын ішкенде;

ондай кезде теріңіз жарылуға, жараларға және қышынуға бейім болуы мүмкін;

терінің ыстыққа сезімталдығын төмендететін, ауруды басатын дәріні қабылдаған кезде;

+ 76 hidden pages