Philips SBCVL1100 User Manual

For preview purpose only

Philips
Wireless TV link

SBCVL1100

Share your satellite or subscription TV
channels.

Without wires

Watch your TV programmes wirelessly on your second TV.

Watch and listen anywhere!

• Watch any video device on a 2nd TV

• Works with DVD+RW/ DVD/ VCR / set-top box, and many more

• Compatible with most video devices and brands

Operate your TV entertainment anywhere!

• Device can be operated in a closed cabinet

• Record any input source no matter what you are watching

Simple set-up and easy to use

• Less clutter, less fuss and no cable laying or drilling

• Wireless signal passes through walls and ceilings

For preview purpose only

Wireless TV link

Technical specifications Product highlights

Tuner / Reception / Transmission

• TV system: PAL, SECAM

• Typical range indoor: 15-30 m

• Typical range outdoor: 100 m

• Antenna location: Picture & sound: Internal, RC
extender: Internal

• Frequency range: Picture & sound: 2.4 GHz RC
extender: 433 MHz MHz

• Supported IR carrier frequency: 32-40 KHz

• Remote control extender

Accessories

• AC/DC adaptor: 2x 9VDC, 300mA

• SCART duplicator: on SCART input cable

Dimensions

• Receiver dimensions (W x H x D):
144 x 41 x 91 mm

• Temperature (operation): +5ºC to +35ºC

• Transmitter dimensions (W x H x D):
144 x 41 x 91 mm

Power

• Power consumption: 7W

• Power supply: AC/DC Adapter, 220-240V

Receiver

• SCART out: CVBS out, Audio L+R out

Transmitter

• SCART 1: CVBS in, Audio L+R in

•

SBCVL1100/05

Watch any device on a 2nd TV

The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices. If your device has one of these standard
connectors it works with the wireless link

Works with DVD and many more

Extend your possibilities for viewing movies, sports
events, live performances and a range of TV channels
anywhere in your home. The wireless TV link is suitable
for transmission of AV content of all brands of PayTV
and Pay-per-View decoders, satellite receivers, set-top
boxes, DVD players, VCRs and camcorders.

Works on almost all brands

The wireless link uses standard SCART and cinch plugs
that are used by almost every brand of audio/video
devices.

Operates in closed cabinet

If you store your audio/video devices in a cabinet, you
cannot operate these devices with a normal IR remote
control. The Philips wireless remote control link allows
you to operate these devices with the cabinet doors
closed thanks to an RF-based link that picks up the
infrared signals of a remote contro l and t ransla tes th em
into RF. The receiver unit then translates them back to
IR.

Record sources independently

You can record any A/V input source - regardless of
what you are watching on your main TV or on your
second TV - thanks to this record function. You simply
instruct the transmitter box which device should be
recorded on your VCR or DVD-R.

Wireles means no drilling

A 2.4 GHz wireless link between the receiver and
transmitter means you don't have to lay cables or drill
holes through walls.

Wireless goes through walls

The re 's no need to buy or ren t d uplicate A /V equipment .
The wireless RF system extends your possibilities for
viewing DVD movies and your favourite Satellite or TV
channels anywhere in your home. With a range of up to
30 met ers insi de t he h ous e, i t delivers high-quality video
and stereo audio no matter where your second TV is
located.

Date of issue 2006-06-28

Version: 4.0

12 NC: 9082 100 01883
EAN: 87 10895 76749 1

Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
© 2006 Koninklijke Philips Electronics N.V.
All Rights reserved.

www.philips.com