Philips SBCRU151/00S, SBCRU151/05, SBCRU151/00H, SBCRU151/00 User Manual

Universal

SBC RU 151

Instructions for use English 4

Mode d'emploi Français 8

Bedienungsanleitung Deutsch 12

Gebruiksaanwijzing Nederlands 16

Instrucciones de manejo Español 20

Manual de utilização Português 24

Instruzioni per l'uso Italiano 28

 

 32

Bruksanvisning Svenska 36

Brugsanvisning Dansk 40

Bruksanvisning Norsk 44

Käyttöohje Suomi 48

Instrukcja użytkowania

Polski 52

RU151.qxd 04-06-2004 16:51 Pagina 1

UNIVERSAL

SBC RU 151

PROG

VOL

RU151.qxd 04-06-2004 16:51 Pagina 3

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Automatically setting the remote control. . . . . . . . . . . . . . . . . . . . . . . . . 6

3. Keys and functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . 56-59

1. Introduction

Congratulations on your purchase of the Philips SBC RU151 universal remote control. After installing the remote control it can operate the most-used functions of almost any brand of TV.

You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’.

2. Installing the remote control

Inserting the batteries 1 Press the cover inwards and slide it in the

direction of the arrow.

2 Place two R03, UM4 or AAA type batteries

into the battery compar tment, as shown.

3 Slide the cover back and click it firmly into

place.

Testing the remote control

The remote control has been programmed to operate the most-used functions of almost any brand of TV. Because the RU151 may use different signals for each make and even for different models of the same make, it is advisable to test whether your TV responds to the RU151. The example below instructs you how to do this.

1 Tu rn your TV on manually or use the original remote control.

Tune to channel 1.

2 Check whether all the keys are working.

For an overview of the keys and their functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the RU151 is ready for use.

• If the device does not respond at all or not to all of the key commands, follow the instructions under ‘Setting the remote control’.

Instructions for use

English

RU151.qxd 04-06-2004 16:51 Pagina 4

PROG

VOL

PROG

English

Instructions for use

Setting the remote control

This is only necessary if your TV does not respond to the RU151. If that is the case, the RU151 does not recognize the brand and/or model of your TV and you need to program the remote control to do so. The example below instructs you how to do this.

1 Tu rn on the TV manually or use the original remote control.

Tune in to channel 1.

2 Look up the brand of your TV in the code list at the back of this

manual. One or more five-figure codes are shown for each brand. Note the first code.

3 Keep keys s and y on the RU151 pressed

simultaneously for five seconds until the green LED remains lit.

4 Then enter the code noted in step 2

using the remote control keys as follows:

-PROG + for entering 1;

-VOL – for entering 2;

-VOL + for entering 3;

-PROG – for entering 4;

- Mute (s) + for entering 5.

– The green LED will now flash twice.

If the LED flashes once for an extended period, the code has not been entered properly or the wrong code has been entered. Start again from step 2.

5 Point the RU151 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the RU151 is ready for

use. Do not forget to note your code.

• If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list.

RU151.qxd 04-06-2004 16:51 Pagina 5

PROG

VOL

PROG

VOL

PROG

VOL

+ 7 hidden pages