Philips S7780/64, S7720/31, S7710/26, S7530/50, S7522/50 User Manual [fr]

Series S7000

S7780/64, S 7720/31,

S771 0/26, S7530/50,

S7522/50, S 7520/50,

S7510/41

1

16

15

24

23

25

9

11

10

14

13

18

17

19

20 21

2

3

4

5

6

7

8

12

22

empty page before TOC

English 6
Deutsch 41
Français 81

English

6

Contents

Introduction_______________________________________________________ 7
Important safety information_____________________________________ 7
Danger____________________________________________________________ 7
Warning___________________________________________________________ 8
Caution____________________________________________________________ 9
Electromagnetic fields (EMF)_____________________________________ 11
General____________________________________________________________ 11
General description_______________________________________________ 11
The display________________________________________________________ 12
Charging___________________________________________________________ 12
Battery fully charged______________________________________________ 13
Battery low________________________________________________________ 13
Remaining battery charge________________________________________ 13
’Unplug for use’ reminder_________________________________________ 14
Cleaning reminder________________________________________________ 14
Travel lock_________________________________________________________ 14
Replacement reminder___________________________________________ 15
Charging___________________________________________________________ 15
Charging with the supply unit____________________________________ 15
Charging in the SmartClean system (specific types only)_______ 16
Using the appliance______________________________________________ 16
Switching the appliance on and off______________________________ 17
Shaving____________________________________________________________ 17
Using the click-on attachments__________________________________ 19
Cleaning and maintenance_______________________________________ 23
Cleaning the shaver under the tap_______________________________ 23
Thorough cleaning________________________________________________ 24
Cleaning the shaver in the SmartClean system__________________ 27
Cleaning the click-on attachments_______________________________ 30
Cleaning the trimmer attachment________________________________ 31
Cleaning the beard styler attachment___________________________ 31

English

English

Cleaning the cleansing brush attachment_______________________ 32
Storage____________________________________________________________ 33
Replacement______________________________________________________ 33
Replacing the shaving heads_____________________________________ 33
Replacing the cleansing brush attachment______________________ 34
Ordering accessories_____________________________________________ 34
Recycling__________________________________________________________ 35
Removing the rechargeable appliance battery__________________ 35
Warranty and support____________________________________________ 37
Warranty restrictions______________________________________________ 37
Troubleshooting__________________________________________________ 37
Shaver_____________________________________________________________ 37
SmartClean system_______________________________________________ 39

Introduction

Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at

www.philips.com/welcome.

Important safety information

Read this important information carefully before
you use the appliance and its accessories and save
it for future reference. The accessories supplied
may vary for different products.

Danger

- Keep the supply unit dry.

7

English

8

Warning

- To charge the battery, only use the
detachable supply unit (HQ8505) provided
with the appliance.

- The supply unit contains a transformer. Do
not cut off the supply unit to replace it with
another plug, as this causes a hazardous
situation.

- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not play
with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.

- Always unplug the shaver before you clean
it under the tap.

- Always check the appliance before you use
it. Do not use the appliance if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.

English

- Do not open the appliance to replace the
rechargeable battery.

Caution

- Never immerse the cleaning
system or the charging stand in
water and do not rinse it under
the tap.

- Never use water hotter than
60°C to rinse the shaver.

- Only use this appliance for its
intended purpose as shown in
the user manual.

- For hygienic reasons, the
appliance should only be used
by one person.

- Never use compressed air,
scouring pads, abrasive
cleaning agents or aggressive
liquids such as petrol or
acetone to clean the appliance.

- If your shaver comes with a
cleaning system, always use the
original Philips cleaning fluid
(cartridge or bottle, depending
on the type of cleaning system).

9

10

English

- Always place the cleaning
system on a stable, level and
horizontal surface to prevent
leakage.

- If your cleaning system uses a
cleaning cartridge, always make
sure the cartridge compartment
is closed before you use the
cleaning system to clean or
charge the shaver.

- When the cleaning system is
ready for use, do not move it to
prevent leakage of cleaning
fluid.

- Water may drip from the socket
at the bottom of the shaver
when you rinse it. This is normal
and not dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.

- Do not use the supply unit in or
near wall sockets that contain
an electric air freshener to
prevent irreparable damage to
the supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.

General

- This shaver is waterproof. It is suitable for use in
the bath or shower and for cleaning under the
tap. For safety reasons, the shaver can
therefore only be used without cord.

- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.

- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.

General description

1 Protection cap for cleansing brush attachment

(S7780/64, S7530/50, S7522/50, S7520/50 only)

2 Click-on cleansing brush attachment (S7780/64,

S7530/50, S7522/50, S7520/50 only)

3 Comb for beard styler attachment (S7780/64,

S7720/31, S7530/50, S7522/50, S7520/50,
S7510/41 only)

4 Click-on beard styler attachment (S7780/64,

S7720/31, S7530/50, S7522/50, S7520/50,
S7510/41 only)

5 Click-on trimmer attachment (S7710/26 only)
6 Click-on shaving unit
7 Handle
8 Socket for small plug

English

11

English

12

The display

Charging

9 Battery charge indicator with 3 lights
10 Unplug for use symbol
11 Travel lock symbol
12 Replacement reminder
13 Cleaning reminder
14 Cleaning cartridge for SmartClean system
15 SmartClean system (S7780/64, S7720/31,

S7710/26 only)

16 Cap of SmartClean system
17 On/off button
18 Replacement symbol
19 Rinsing symbol
20 Ready symbol
21 Battery symbol
22 Cleaning brush
23 Supply unit
24 Small plug
25 Pouch

The accessories supplied may vary for different
products. The box shows the accessories that have
been supplied with your product.

Note: If you press the on/off button during
charging, the 'unplug for use' symbol flashes white
to remind you that you have to disconnect the
appliance from the wall socket.

Quick charge: When the battery is empty and you
connect the appliance to the wall socket, the lights
of the battery charge indicator light up one after
the other repeatedly. When the appliance contains
enough energy for one shave, the bottom light of
the battery charge indicator starts flashing slowly.

While the appliance continues to charge, first the
bottom light of the battery charge indicator flashes
and then lights up continuously. Then the second
light flashes and then lights up continuously, and
so on until the appliance is fully charged.

Battery fully charged

Note: When the battery is full, the display switches
off automatically after 30 minutes.

Note: This appliance can only be used without
cord.

When the battery is fully charged, all lights of the
the battery charge indicator light up white
continuously.

Note: When the battery is full, the display switches
off automatically after 30 minutes.

Battery low

When the battery is almost empty, the bottom light
of the battery charge indicator flashes orange.

Remaining battery charge

The remaining battery charge is shown by the
lights of the battery charge indicator that light up
continuously.

English

13

3 sec.

English

14

’Unplug for use’ reminder

The appliance is equipped with an ‘unplug for use’
reminder. The ‘unplug for use’ symbol flashes to
remind you that you have to disconnect the
appliance from the supply unit before you can
switch it on.

Cleaning reminder

Clean the shaver after every shave for optimal
performance. When you switch off the appliance,
the cleaning reminder flashes to remind you to
clean the appliance.

Travel lock

You can lock the appliance when you are going to
travel. The travel lock prevents the appliance from
being switched on by accident.

Activating the travel lock

1 Press the on/off button for 3 seconds to enter

the travel lock mode.

While you activate the travel lock, the travel lock
symbol lights up continuously. When the travel
lock is activated, the travel lock symbol flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

The travel lock symbol flashes and then lights

1

2

up continuously. The appliance is now ready for
use again.

Replacement reminder

For maximum shaving performance, we advise you
to replace the shaving heads every two years. The
appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The shaving unit symbol lights up
and the arrows flash to indicate that you have to
replace the shaving heads.

Note: After replacing the shaving heads, you need
to reset the replacement reminder by pressing the
on/off button for 7 seconds.

Charging

Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.

Charging takes approx. 1 hour. A fully charged
shaver has a shaving timeof up to 50 minutes.

Note: You cannot use the appliance while it is
charging.

Charging with the supply unit

1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the

supply unit in the wall socket.

3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the
appliance.

English

15

1

2

3

English

16

Charging in the SmartClean system (specific types only)

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.
3 Press the top cap to be able to place the shaver

in the holder ('click').

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points
towards the SmartClean system holder.

5 Place the shaver in the holder, tilt the shaver

backwards and press down the top cap to
connect the shaver (‘click’).

The battery symbol starts to flash to indicate
that the appliance is charging. When the battery
is fully charged, the battery symbol lights up
continuously.

(S7780/64, S7720/31, S7710/26 only)

Using the appliance

Note: This appliance can only be used without
cord.

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once.

2 To switch off the appliance, press the on/off

button once.

Battery charge indicator with 3 lights: The display
lights up for a few seconds to show the remaining
battery status.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system. To allow
your skin to adapt to this new appliance, we advise
you to shave regularly (at least 3 times a week) and
exclusively with this appliance for a period of 3
weeks.

Dry shaving

1 Switch on the appliance.
2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin
irritation.

3 Clean the appliance after use.

Wet shaving

For a more comfortable shave, you can also use
this appliance on a wet face with shaving foam or
shaving gel.

English

17

18

English

To shave with shaving foam or shaving gel, follow
the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your
skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in
different directions. Make sure each shaving
head is fully in contact with the skin. Exert
gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin
irritation.

Note: Rinse the shaving unit regularly to ensure
that it continues to glide smoothly over your
skin.

6 Dry your face.
7 Clean the appliance after use.

Note: Make sure you rinse all foam or shaving gel
off the appliance.

Using the click-on attachments

Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.

Removing or attaching the click-on attachments

1 Make sure the appliance is switched off.
2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you
pull it off the appliance.

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the
attachment to attach it to the appliance (‘click’).

Using the trimmer attachment

You can use the trimmer attachment to groom
your sideburns and moustache.

1 Attach the attachment to the appliance ('click').
2 Switch on the appliance.

English

19

3 Hold the trimmer attachment perpendicular to

the skin and move the appliance downwards
while you exert gentle pressure.

4 Clean the attachment after use (see 'Cleaning

and maintenance').

(S7710/26 only)

2

1

20

English

Using the beard styler attachment with comb

You can use the beard styler with the comb
attached to style your beard at one fixed setting,
but also at different length settings. You can also
use it to pre-trim any long hairs before shaving for
a more comfortable shave.

The length settings on the beard styler attachment
correspond to the remaining hair length after
cutting and range from 1 to 5mm (3/64 - 3/16in).

1 Attach the attachment to the appliance ('click').

2 Slide the comb straight into the guiding grooves

on both sides of the beard styler (‘click’).

3 Press the length selector and then push it to

the left or right to select the desired hair length
setting.

4 Switch on the appliance.

5 Move the appliance upwards while you exert

gentle pressure. Make sure the front of the
comb is in full contact with the skin.

6 Clean the attachment after use (see 'Cleaning

and maintenance').

(S7780/64, S7720/31, S7530/50, S7522/50,
S7520/50, S7510/41 only)

English

Using the beard styler attachment without comb

You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline to a length of 0.5mm (1/32
in).

1 Pull the comb off the beard styler.

Note: Grab the comb in the center to pull it off
the beard styler. Do not pull at the sides of the
comb.

2 Switch on the appliance.

3 Hold the beard styler attachment perpendicular

to the skin and move the appliance downwards
while you exert gentle pressure.

4 Clean the attachment after use (see 'Cleaning

and maintenance').

(S7780/64, S7720/31, S7530/50, S7522/50,
S7520/50, S7510/41 only)

Using the cleansing brush attachment

Use the rotating cleansing brush with your daily
cleansing cream. The cleansing brush removes oil
and dirt, contributing to a healthy and oil-free skin.
We advise you to use it no more than twice a day.

Do not use the appliance on damaged or irritated
skin or on wounds.

1 Attach the attachment to the appliance ('click').

21

20 sec.

20 sec.

20 sec.

22

English

2 Moisten the attachment with water.

Note: Do not use the appliance with a dry
cleansing brush attachment, as this can irritate
the skin.

3 Moisten your face with water and apply a

cleanser to your face.

4 Place the attachment on your cheek.
5 Switch on the appliance.

6 Gently move the attachment across your skin

from the nose towards the ear. Do not push the
attachment too hard onto the skin to make sure
that the treatment remains comfortable.

Note: Do not cleanse the sensitive area around
your eyes.

7 After approx. 20 seconds, move the appliance

to your other cheek and start cleansing this part
of your face.

8 After approx. 20 seconds, move the appliance

to your forehead and start cleansing this part of
your face. Gently move the brush head from left
to right.

Note: We advise you to not overdo the
cleansing and to not cleanse any zone longer
than 20 seconds.

9 After the treatment, rinse and dry your

face.Your face is now ready for the next step of
your daily skincare routine.

10 Clean the attachment after use (see 'Cleaning

and maintenance').

(S7780/64, S7530/50, S7522/50, S7520/50 only)

Cleaning and maintenance

Note: The accessories supplied may vary for
different products. The box shows the accessories
that have been supplied with your product.

Cleaning the shaver under the tap

Clean the shaver after every shave for optimal
performance.

Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.

Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.

1 Switch on the appliance.
2 Rinse the shaving unit under a warm tap.

English

23

3 Switch off the appliance. Pull the shaving head

holder off the bottom part of the shaving unit.

English

24

4 Rinse the hair chamber under the tap.

5 Rinse the shaving head holder under a warm

6 Carefully shake off excess water and let the

7 Attach the shaving head holder to the bottom

Thorough cleaning

We advise you to clean the shaving heads
thoroughly once a month or when the appliance
does not shave as well as it used to.

Note: The shaving heads are locked by a blue or an
orange retaining ring. Follow the correct
instructions.

tap.

shaving head holder air-dry completely.

part of the shaving unit (‘click’).

1

2

English

1 Switch off the appliance.
2 Pull the shaving head holder off the bottom

part of the shaving unit.

3 Rinse the hair chamber and shaving head

holder under the tap.

4 Turn the retaining ring anticlockwise and lift it

off the shaving head.

Repeat this process for the other retaining rings.
Place them aside in a safe place.

5 Remove the shaving heads from the shaving

head holder. Each shaving head consists of a
cutter and guard.

6 Clean the cutter and guard under the tap.

25

1

2

1

2

English

26

7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head

holder.

Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.

10 Blue retaining ring: Place the retaining ring on

the shaving head and turn it clockwise to
reattach the retaining ring.

Place the arrows on the ring in line with the
projections in the shaving head holder. Turn the
ring clockwise until it clicks to indicate that the
ring is fixed.

- Orange retaining ring: Place the retaining ring
on the shaving head and turn it clockwise to
reattach the retaining ring. Repeat this process
for the other retaining rings.

Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.

Hold the shaving head holder in your hand
when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface when you do
this, as this may cause damage.

11 Attach the shaving head holder to the bottom

part of the shaving unit (‘click’).

1

2

English

Cleaning the shaver in the SmartClean system

(S7780/64, S7720/31, S7710/26 only)

Replacing the cartridge of the SmartClean system

Replace the cleaning cartridge when the
replacement symbol flashes orange or when you
are no longer satisfied with the cleaning result. If
you clean the shaver in the SmartClean system
once a week, the SmartClean cartridge lasts
approximately three months.

1 While holding the SmartClean system with one

hand, press the button on the side of the
SmartClean system and lift the top part of the
SmartClean system.

2 Remove the cleaning cartridge from the

SmartClean system and pour out any remaining
cleaning fluid.

You can safely pour the cleaning fluid down the
sink.

3 Discard the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull off

the seal.

5 Place the cleaning cartridge in the SmartClean

system.

27

1

2

28

English

6 While holding the SmartClean system with one

hand, gently push the top part of the
SmartClean system back down (‘click’).

Preparing the SmartClean system for use

Caution: Do not tilt the SmartClean system to
prevent leakage.

Note: Hold the SmartClean system while you
prepare it for use.

Note: If you clean the shaver in the SmartClean
system once a week, the SmartClean cartridge
lasts approximately three months.

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.
3 While holding the SmartClean system with one

hand, press the button on the side of the
SmartClean system and lift the top part of the
SmartClean system.

4 Pull the seal off the cleaning cartridge.

5 Place the cleaning cartridge in the SmartClean

system.

1

2

3

English

29

6 While holding the SmartClean system with one

hand, gently push the top part of the
SmartClean system back down (‘click’).

Using the SmartClean system

Note: If you use the shaver with shaving foam or
gel, quickly rinse under warm water before
cleaning in the SmartClean system.

Caution: Always shake excess water off the
shaver before you place it in the SmartClean
system.

1 Press the top cap to be able to place the shaver

in the holder ('click').

2 Hold the shaver upside down above the holder.

Make sure the front of the shaver points
towards the SmartClean system holder.

3 Place the shaver in the holder (1), tilt the shaver

backwards (2) and press down the top cap to
connect the shaver ('click') (3).

The battery symbol starts to flash, which
indicates that the shaver is charging.

30

English

4 Press the on/off button on the SmartClean

system to start the cleaning program.
During the cleaning phase, the cleaning symbol

flashes. When the cleaning phase is done (after
approx. 10 minutes), the cleaning symbol lights
up continuously.

When the cleaning program is done, the ready
symbol lights up continuously.

30 minutes after the cleaning program and
charging are done, the SmartClean system
switches off automatically.

The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Charging takes approx. 1 hour.

5 To let the shaver dry, you can leave it in the

SmartClean system until your next shave. You
can also remove the shaver from the
SmartClean system, shake off excess fluid, open
the shaving unit and let the shaver air dry.

Note: If you press the on/off button of the
SmartClean system during the cleaning program,
the program stops. In this case, the cleaning or
drying symbol goes out.

Note: If you disconnect the SmartClean system
from its power source, the cleaning program stops.

Cleaning the click-on attachments

Never dry trimmer or beard styler attachments with
a towel or tissue, as this may damage the trimming
teeth.

The accessories supplied may vary for different
products. The box shows the accessories that have
been supplied with your product.