Philips XZ5810, S5888, S5580, S5571, S5570 User Manual

...

Series S5000

XZ5810, S5888, S5580, S5571, S5570, S5560, S5551, S5530, S5380, S5370

26 27

English 6

简体中文

English

General description

1 Protection cap for nose trimmer attachment

(S5530/37 only)

2 Click-on nose trimmer attachment (S5530/37

only)

3 Protection cap for cleansing brush attachment

(XZ5810/70, S5580/68, S5571/68, S5570/43, S5570/33, S5560/33 only)

4 Click-on cleansing brush attachment

(XZ5810/70, S5580/68, S5571/68, S5570/43, S5570/33, S5560/33 only)

5 Comb for beard styler attachment (S5580/68,

S5571/68, S5570/33, S5560/33 only)

6 Click-on beard styler attachment (S5580/68,

S5571/68, S5570/33, S5560/33 )

7 Click-on precision trimmer attachment

(XZ5810/70, S5580/68, S5571/68, S5570/43, S5380/04, S5370/04, S5530/37 only)

8 Protection cap for shaving unit (XZ5810/70,

S5888/75, S5380/04, S5370/04 only) 9 Click-on shaving unit 10 Shaving unit release button 11 On/off button 12 Turbo button 13 Handle 14 Socket for small plug 15 Battery charge indicator with 3 lights 16 Unplug for use symbol 17 Travel lock symbol 18 Replacement reminder 19 Cleaning reminder 20 Cleaning cartridge for SmartClean system

(XZ5810/70, S5888/75, S5570/33, S5560/33,

S5551/27, S5530/37 only) 21 SmartClean system (XZ5810/70, S5888/75,

S5570/33, S5560/33, S5551/27, S5530/37 only)

22 Cap of SmartClean system (XZ5810/70,

S5888/75, S5570/33, S5560/33, S5551/27,

S5530/37 only) 23 On/off button 24 Replacement symbol 25 Rinsing symbol 26 Ready symbol 27 Battery symbol 28 Supply unit 29 Small plug 30 Pouch (XZ5810/70, S5570/43, S5570/33,

S5560/33, S5530/37 only) The accessories supplied may vary for different

products. The box shows the accessories that have been supplied with your product.

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at

www.philips.com/welcome.

Important safety information

Read this important information carefully before you use the appliance and its accessories and save it for future reference. The accessories supplied may vary for different products.

Danger

- Keep the supply unit dry.

English

Warning

Caution

- To charge the battery, only use the detachable

supply unit (HQ8505) provided with the

appliance.

- The supply unit contains a transformer. Do not

cut off the supply unit to replace it with another

plug, as this causes a hazardous situation.

- This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning use of the appliance in a safe way

and understand the hazards involved. Children

shall not play with the appliance. Cleaning and

user maintenance shall not be made by

children without supervision.

- Always unplug the shaver before you clean it

under the tap.

- Always check the appliance before you use it.

Do not use the appliance if it is damaged, as

this may cause injury. Always replace a

damaged part with one of the original type.

- This appliance contains batteries that are non-

replaceable.

- Do not open the appliance to replace the

rechargeable battery.

- Never immerse the cleaning system or the

charging stand in water and do not rinse it

under the tap.

- Never use water hotter than 60°C to rinse the

shaver.

- Only use this appliance for its intended purpose

as shown in the user manual.

- For hygienic reasons, the appliance should only

be used by one person.

- Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the

appliance.

- If your shaver comes with a cleaning system,

always use the original Philips cleaning fluid

(cartridge or bottle, depending on the type of

cleaning system).

- Always place the cleaning system on a stable,

level and horizontal surface to prevent leakage.

- If your cleaning system uses a cleaning

cartridge, always make sure the cartridge

compartment is closed before you use the

cleaning system to clean or charge the shaver.

- When the cleaning system is ready for use, do

not move it to prevent leakage of cleaning fluid.

- Water may drip from the socket at the bottom

of the shaver when you rinse it. This is normal

and not dangerous because all electronics are

enclosed in a sealed power unit inside the

shaver.

- Do not use the supply unit in or near wall

sockets that contain an electric air freshener to

prevent irreparable damage to the supply unit.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

General

- This shaver is waterproof. It is suitable for use in

the bath or shower and for cleaning under the

tap. For safety reasons, the shaver can

therefore only be used without cord.

- The supply unit is suitable for mains voltages

ranging from 100 to 240 volts.

English

- The supply unit transforms 100-240 volts to a

safe low voltage of less than 24 volts.

The display

Battery charge indicator

Note: If you press the on/off button during charging, the 'unplug for use' symbol flashes white to remind you that you have to disconnect the appliance from the wall socket.

Quick charge: When the battery is empty and you connect the appliance to the wall socket, the lights of the battery charge indicator light up one after the other repeatedly. When the appliance contains enough energy for one shave, the bottom light of the battery charge indicator starts flashing slowly.

While the appliance continues to charge, first the bottom light of the battery charge indicator flashes and then lights up continuously. Then the second light flashes and then lights up continuously, and so on until the appliance is fully charged.

Battery fully charged

Note: When the battery is full, the display switches off automatically after 30 minutes.

Note: This appliance can only be used without cord.

When the battery is fully charged, all lights of the battery charge indicator light up white continuously.

Battery low

When the battery is almost empty, the bottom light of the battery charge indicator flashes orange. At this point there is enough energy left for one shave.

Remaining battery charge

The remaining battery charge is shown by the lights of the battery charge indicator that light up continuously.

’Unplug for use’ reminder

The ‘unplug for use’ symbol flashes to remind you that you have to disconnect the appliance from the wall socket before you can switch it on.

Cleaning reminder

Clean the shaver after every use for optimal performance. When you switch off the appliance, the cleaning reminder flashes to remind you to clean the appliance.

English

Travel lock

When you are going to travel, you can lock the shaver to prevent it from accidentally switching on (see 'Activating the travel lock').

Activating the travel lock

3 sec.

English

1 Press the on/off button for 3 seconds to use

the travel lock mode.

While you activate the travel lock, the travel lock

symbol lights up continuously. When the travel

lock is activated, the travel lock symbol flashes.

If you try to switch on the shaver while the

travel lock is active, the travel lock symbol

flashes.

Deactivating the travel lock

1 Press the on/off button for 3 seconds.

While you deactivate the travel lock, the travel

lock symbol lights up briefly and the shaver

produces a short sound. The shaver switches on

and is now ready for use again.

Replacement reminder

For maximum shaving performance, we advise you to replace the shaving heads every two years. The appliance is equipped with a replacement reminder which reminds you to replace the shaving heads. The shaving unit symbol and arrows light up to indicate that you have to replace the shaving heads (see 'Replacing the shaving heads').

Note: After replacing the shaving heads, you can reset the replacement reminder by pressing the on/off button for 7 seconds. If you do not reset the replacement reminder, the shaver resets automatically after 9 shaves.

Turbo setting (specific types only)

The appliance is equipped with a Turbo or Turbo+ setting. This setting is intended for quicker and more intense shaving and makes hard-to-reach areas easier to shave.

Activating the Turbo setting

1 To activate the Turbo setting, press the Turbo

button once when the appliance is switched on.

Deactivating the Turbo setting

1 To deactivate the Turbo setting, press the Turbo

button once.

Charging

Charge the shaver before you use it for the first time and when the display indicates that the battery is almost empty.

Charging takes approx. 1 hour. Note:You cannot use the appliance while it is

charging.

Charging with the supply unit

1 Make sure the appliance is switched off. 2 Put the small plug in the appliance and put the

supply unit in the wall socket. 3 After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Note: When the battery is full, the display

switches off automatically after 30 minutes.

English

Charging in the SmartClean system (specific types only)

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket.

3 Press to open the SmartClean system cap, to be

able to place the shaver in the holder ('click').

4 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean system holder.

5 Place the shaver in the holder, tilt the shaver

backwards and press down the SmartClean

system cap to connect the shaver (‘click’).

The battery symbol flashes to indicate that the

appliance is charging. When the battery is fully

charged, the battery symbol lights up

continuously.

Using the appliance

Note: This appliance can only be used without cord.

Switching the appliance on and off

1 To switch on the appliance, press the on/off

button once. 2 To switch off the appliance, press the on/off

button once. The display lights up for a few seconds to show the

remaining battery status.

Shaving

Skin adaptation period

Your first shaves may not bring you the result you expect and your skin may even become slightly irritated. This is normal. Your skin and beard need time to adapt to any new shaving system. To allow your skin to adapt to this new appliance, we advise you to shave regularly (at least 3 times a week) and exclusively with this appliance for a period of 3 weeks.

Dry shaving

1 Switch on the appliance. 2 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, as this can cause

skin irritation. 3 Clean the appliance after use.

Wet shaving

For a more comfortable shave, you can also use this appliance on a wet face with shaving foam or shaving gel.

To shave with shaving foam or shaving gel, follow the steps below:

English

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to your skin.

3 Rinse the shaving unit under the tap to ensure

that the shaving unit glides smoothly over your

skin.

4 Switch on the appliance.

5 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, this can cause skin

irritation.

Note: Rinse the shaving unit regularly to ensure

that it continues to glide smoothly over your

skin.

6 Dry your face. 7 Clean the appliance after use.

Note: Make sure you rinse all foam or shaving

gel off the appliance.

Turbo setting (specific types only)

The appliance is equipped with a Turbo or Turbo+ setting. This allows you to shave hard-to-reach areas more quickly.

1 Switch on the appliance. 2 To activate the Turbo setting, press the Turbo

button once when the appliance is switched on.

3 Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Circular movements provide better

shaving results than straight movements. 4 To deactivate the Turbo setting, press the Turbo

button once.

Using the click-on attachments

Note: The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product.

Removing or attaching click-on attachments

1 Make sure the appliance is switched off. 2 Pull the attachment straight off the appliance.

Note: Do not twist the attachment while you

pull it off the appliance.

English

3 Insert the lug of the attachment into the slot in

the top of the appliance. Then press down the

attachment to attach it to the appliance (‘click’).

Using the precision trimmer attachment

You can use the precision trimmer attachment to touch up your beard, sideburns and moustache.

1 Attach the attachment to the appliance ('click'). 2 Switch on the appliance.

3 Hold the trimmer attachment perpendicular to

the skin and move the appliance downwards

while you exert gentle pressure. 4 Clean the attachment after use (see 'Cleaning

and maintenance').

Using the beard styler attachment with comb

You can use the beard styler attachment with the comb attached to style your beard at one fixed setting or at different length settings. You can also use it to pre-trim any long hairs before shaving for a more comfortable shave.

The length settings on the beard styler attachment correspond to the remaining hair length after cutting and range from 1 to 5mm (3/64 - 3/16in).

1 Attach the attachment to the appliance ('click').

English

2 Slide the comb straight into the guiding grooves

on both sides of the beard styler attachment

(‘click’).

3 Press the length selector and then push it to

the left or right to select the desired hair length

setting.

4 Switch on the appliance.

5 Move the appliance upwards while you exert

gentle pressure. Make sure the front of the

comb is in full contact with the skin. 6 Clean the attachment after use (see 'Cleaning

and maintenance').

Using the beard styler attachment without comb

You can use the beard styler attachment without the comb to contour your beard, moustache, sideburns or neckline at a length of 0.5mm (1/32in).

1 Pull the comb off the beard styler attachment.

Note: Grab the comb in the center to pull it off

the beard styler attachment. Do not pull at the

sides of the comb. 2 Switch on the appliance.

English

3 Hold the beard styler attachment perpendicular

to the skin and move the appliance downwards

while you exert gentle pressure. 4 Clean the attachment after use (see 'Cleaning

and maintenance').

Using the cleansing brush attachment

Note: For better shaving results, use the click-on cleansing brush attachment before shaving.

Use the rotating cleansing brush with your daily cleansing cream. The cleansing brush removes oil and dirt, contributing to a healthy and oil-free skin. We advise you to use it no more than twice a day.

Do not use the appliance on damaged or irritated skin or on wounds.

1 Place the attachment on the attachment

holder.

2 Attach the attachment to the appliance ('click').

3 Moisten the attachment with water.

Note: Do not use the appliance with a dry

cleansing brush attachment, as this can irritate

the skin.

4 Moisten your face with water and apply a

cleanser to your face.

5 Place the attachment on your cheek. 6 Switch on the appliance.

20 sec.

English

7 Gently move the brush across your skin from

the nose towards the ear. Do not push the

brush too hard onto the skin to make sure that

the treatment remains comfortable.

Note: Do not cleanse the sensitive area around

your eyes.

8 After approx. 20 seconds, move the appliance

to your other cheek and start cleansing this part

of your face.

9 After approx. 20 seconds, move the appliance

to your forehead and start cleansing this part of

your face. Gently move the brush head from left

to right.

Note: We advise you to not overdo the

cleansing and to not cleanse any zone longer

than 20 seconds. 10 Switch off the appliance and clean the

attachment after use. 11 After the treatment, rinse and dry your

face.Your face is now ready for the next step of

your daily skincare routine.

Using the nose/ear trimmer attachment

You can use the nose/ear trimmer attachment to trim your nose and/or ear hair.

Trimming nose hair

When trimming nose hair, make sure your nostrils are clean.

English

1 Attach the attachment to the appliance ('click'). 2 Switch on the appliance. 3 Carefully insert the attachment into one of your

nostrils.

Do not insert the attachment more than 0.5cm

into your nostrils.

4 Slowly move the attachment around to remove

all unwanted hairs in your nostrils. 5 Clean the attachment after use (see 'Cleaning

and maintenance').

Trimming ear hair

When trimming ear hair, make sure your outer ear channels are clean and free from wax.

1 Attach the attachment to the appliance ('click'). 2 Switch on the appliance. 3 Slowly move the attachment along the rim of

the ear to remove hairs that stick out beyond

the rim. 4 Insert the attachment into the outer ear

channel.

Do not insert the attachment more than 0.5cm

into your ear channel, as this could damage the

eardrum.

5 Slowly turn the attachment around to remove

all unwanted hairs from your outer ear channel. 6 Clean the attachment after use (see 'Cleaning

and maintenance').

Cleaning and maintenance

Note: The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your product.

English

Cleaning the shaver in the SmartClean system

Preparing the SmartClean system for use

Caution: Do not tilt the SmartClean system to prevent leakage.

Note: Hold the SmartClean system while you prepare it for use.

Note: If you clean the shaver in the SmartClean system once a week, the SmartClean cartridge lasts approximately three months.

1 Put the small plug in the back of the

SmartClean system.

2 Put the supply unit in the wall socket. 3 While holding the SmartClean system with one

hand, press the button on the side of the

SmartClean system and lift the top part of the

SmartClean system.

4 Pull the seal off the cleaning cartridge.

5 Place the cleaning cartridge in the SmartClean

system.

English

6 While holding the SmartClean system with one

hand, gently push the top part of the

SmartClean system back down (‘click’).

Using SmartClean

Note: If you use the shaver with shaving foam, shaving gel or pre-shave products, briefly rinse the shaver warm water before you clean it in SmartClean.

Caution: Always shake excess water off the shaver before you place it in the SmartClean system.

1 Press to open the SmartClean cap, to be able to

place the shaver in the holder ('click').

2 Hold the shaver upside down above the holder.

Make sure the front of the shaver points

towards the SmartClean holder.

3 Place the shaver in the holder (1), tilt the shaver

backwards (2) and press down the top cap to

connect the shaver ('click') (3).

The battery symbol on SmartClean starts to

flash, which indicates that the shaver is

charging.

English

4 Press the on/off button on SmartClean to start

the cleaning program.

During the cleaning phase, the cleaning symbol

flashes. When the cleaning phase is done (after

approx. 10 minutes), the cleaning symbol lights

up continuously.

Next, the ready symbol lights up continuously.

30 minutes after the cleaning program and

charging are done, SmartClean switches off

automatically.

The battery symbol lights up continuously to

indicate that the shaver is fully charged.

Charging takes approx. 1 hour.

5 To let the shaver dry, you can leave it in the

SmartClean system until your next shave. You

can also remove the shaver from the

SmartClean system, shake off excess fluid, open

the shaving unit and let the shaver air-dry.

Press to open the SmartClean cap, to remove

the shaver from the holder ('click'). Note: If you press the on/off button of SmartClean

during the cleaning program, the program stops. In this case, the cleaning or drying symbol goes out.

Note: If you disconnect SmartClean from its power supply, the cleaning program stops.

Replacing the SmartClean cartridge

Replace the cleaning cartridge when the replacement symbol flashes orange or when you are no longer satisfied with the cleaning result. If you clean the shaver with SmartClean once a week, the cartridge lasts approximately three months.

English

1 While holding SmartClean with one hand, press

the button on the side of SmartClean and lift

the top part of the SmartClean.

2 Remove the cleaning cartridge from SmartClean

and pour out any remaining cleaning fluid. You

can safely pour the cleaning fluid down the sink.

3 Discard the empty cleaning cartridge. 4 Unpack the new cleaning cartridge and pull off

the seal.

5 Place the cleaning cartridge in the SmartClean.

6 While holding SmartClean with one hand, gently

push the top part back down (‘click’).

Cleaning the shaver under the tap

Clean the shaver after every use for optimal performance.

Be careful with hot water. Always check if the water is not too hot, to prevent burning your hands.

Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.

+ 58 hidden pages