Philips RJ12 User Manual

h
silgnEe

si
açnarFlo

ñ
aps

E

RF IN

AUDIO OUT

CONTROL

DISPLAY

PPV

HDMI OUT

NETWORK

DIGITAL AUDIO

POWER

3.

2.

1.

RF IN

AUDIO OUT

CONTROL

DISPLAY

PPV

HDMI OUT

NETWORK

DIGITAL AUDIO

POWER

Connect Antenna and Display Cables

Note: Some TV sets may already have the cables connected.

Use a HDMI connector cable to
connect the Set-Top Box to the
TV. Attach one end of the
HDMI cable to the jack labeled
HDMI Out on the Set-Top
Box and the other end to the
HDMI jack on the TV. If the TV
has 2 HDMI jacks, ensure that
the cable is connected to the
jack labeled HDMI 1 on the
TV.

Use a RJ12 Data cable to
connect the Set-Top box to the
TV. Attach one end of the RJ12
Data cable to the jack labeled
DISPLAY on the Set-Top box
and the other end to the jack
labeled DATA1 on the TV.

After connecting all the cables,
proceed to the next section and
connect the Power cables.

Connect Power Cables

Note: Some TV sets may already have the cables connected.

Connect the power cable
from the External Power
Adaptor to the jack
labeled Power on the
Set-Top Box.

Connect the antenna cable to
the antenna input of the
Set-Top Box.

Attach the Mains Power
Splitter to the External
Power Adaptor.

Connect the power cable
from the Mains Power
Splitter to the AC-Inlet
on the TV.

Connect the main power
cord (packed with your
TV) into the opening on
the Mains Power Splitter.

After connecting all
cables and devices, plug in
the main power cord to
the wall outlet and switch
on the TV.

'

(

3139 125 38251

5

26” 32” 37”
42” LCD

CAUTION : This is a
Class 1 apparatus. It
must be connected to a
MAINS socket out with
a protective earthing
connection.

4