Datasheet PEMB14, PUMB14 Datasheet (Philips)

查询PEMB14供应商

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors;
R1 = 47 kΩ, R2 = open

Rev. 01 — 17 February 2005 Product data sheet

1. Product profile

1.1 General description

PNP/PNP resistor-equipped transistors.

Table 1: Product overview

Type number Package NPN/PNP

PEMB14 SOT666 - PEMD14 PEMH14
PUMB14 SOT363 SC-88 PUMD14 PUMH14

Philips JEITA

complement

NPN/NPN
complement

1.2 Features

■ Built-in bias resistors

■ Simplifies circuit design

■ Reduces component count

■ Reduces pick and place cost

1.3 Applications

■ Low current peripheral driver

■ Control of IC inputs

■ Replacement of general-purpose transistors in digital applications

1.4 Quick reference data

Table 2: Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

V

CEO

I

O

R1 bias resistor 1 (input) 33 47 61 kΩ

collector-emitter voltage open base - - −50 V
output current (DC) - - −100 mA

Philips Semiconductors

2. Pinning information

Table 3: Pinning

Pin Description Simplified outline Symbol

1 GND (emitter) TR1
2 input (base) TR1
3 output (collector) TR2
4 GND (emitter) TR2
5 input (base) TR2
6 output (collector) TR1

3. Ordering information

Table 4: Ordering information

Type number Package

PEMB14 - plastic surface mounted package; 6 leads SOT666
PUMB14 SC-88 plastic surface mounted package; 6 leads SOT363

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

6 45

1 32

001aab555

Name Description Version

654

R1

TR1

1

TR2

R1

23

006aaa268

4. Marking

Table 5: Marking codes

Type number Marking code

PEMB14 5A
PUMB14 T1*

[1] * = -: made in Hong Kong

* = p: made in Hong Kong
* = t: made in Malaysia
* = W: made in China

[1]

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 2 of 10

Philips Semiconductors

5. Limiting values

Table 6: Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Per transistor

V

CBO

V

CEO

V

EBO

I

O

I

CM

P

tot

T

stg

T

j

T

amb

Per device

P

tot

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

collector-base voltage open emitter - −50 V
collector-emitter voltage open base - −50 V
emitter-base voltage open collector - −5V
output current (DC) - −100 mA
peak collector current - −100 mA
total power dissipation T

SOT363

SOT666
storage temperature −65 +150 °C
junction temperature - 150 °C
ambient temperature −65 +150 °C

total power dissipation T

SOT363

SOT666

amb

amb

≤ 25 °C

≤ 25 °C

[1]

- 200 mW

[1] [2]

- 200 mW

[1]

- 300 mW

[1] [2]

- 300 mW

[1] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.

6. Thermal characteristics

Table 7: Thermal characteristics

Symbol Parameter Conditions Min Typ Max Unit

Per transistor

R

th(j-a)

Per device

R

th(j-a)

[1] Device mounted on a FR4 printed-circuit board, single-sided copper, tin-plated and standard footprint.
[2] Reflow soldering is the only recommended soldering method.

thermal resistance from
junction to ambient

SOT363

SOT666

thermal resistance from
junction to ambient

SOT363

SOT666

T

T

amb

amb

≤ 25 °C

≤ 25 °C

[1]

- - 625 K/W

[1] [2]

- - 625 K/W

[1]

- - 416 K/W

[1] [2]

- - 416 K/W

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 3 of 10

Philips Semiconductors

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

7. Characteristics

Table 8: Characteristics

T

= 25°C unless otherwise specified.

amb

Symbol Parameter Conditions Min Typ Max Unit

Per transistor

I

CBO

collector-base cut-off
current

I

CEO

collector-emitter
cut-off current

I

EBO

emitter-base cut-off

current
h
V

FE

CEsat

DC current gain VCE = −5 V; IC = −1 mA 100 - -

collector-emitter

saturation voltage
R1 bias resistor 1 (input) 33 47 61 kΩ
C

c

collector capacitance VCB = −10 V; IE = ie = 0 A;

VCB = −50 V; IE = 0 A - - −100 nA

VCE = −30 V; IB = 0 A - - −1 µA

= −30 V; IB = 0 A;

V

CE

T

= 150 °C

j

--−50 µA

VEB = −5 V; IC = 0 A - - −100 nA

IC = −10 mA; IB = −0.5 mA - - −150 mV

- - 2.5 pF

f=1MHz

1000

h

FE

100

10

−10

(1)
(2)

(3)

−1

006aaa206

(mA)

C

−10

−10−1

I

VCE = −5 V
(1) T
(2) T
(3) T

= 100 °C

amb

= 25 °C

amb

= −40 °C

amb

Fig 1. DC current gain as a function of collector

current; typical values

−1

V

CEsat

(V)

−1

−10

−2

2

−10

−10

−1

(1)
(2)
(3)

006aaa207

2

−10−1
IC (mA)

−10

IC/IB = 20
(1) T
(2) T
(3) T

= 100 °C

amb

= 25 °C

amb

= −40 °C

amb

Fig 2. Collector-emitter saturation voltage as a

function of collector current; typical values

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 4 of 10

Philips Semiconductors

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

8. Package outline

Plastic surface mounted package; 6 leads SOT363

D

y

pin 1
index

132

e

1

e

E

H

E

AB

X

v M

A

456

Q

A

A

1

b

p

wBM

L

detail X

c

p

0 1 2 mm

scale

DIMENSIONS (mm are the original dimensions)

A

1

UNIT

A

1.1

mm

0.8

OUTLINE

VERSION

SOT363 SC-88

max

0.1

b

cD

p

0.30

0.20

IEC JEDEC JEITA

0.25

0.10

2.2

1.8

E

1.35

1.3

1.15

REFERENCES

e

e

0.65

H

L

Qywv

p

E

1

2.2

0.45

2.0

0.15

0.25

0.15

0.2 0.10.2

EUROPEAN

PROJECTION

ISSUE DATE

97-02-28
04-11-08

Fig 3. Package outline SOT363 (SC-88)

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 5 of 10

Philips Semiconductors

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

Plastic surface mounted package; 6 leads SOT666

D

S

YS

A

E

H

E

X

456

pin 1 index

123

e

b

1

p

e

w M

A

A

c

L

p

detail X

0 1 2 mm

scale

DIMENSIONS (mm are the original dimensions)

UNIT b

mm

OUTLINE

VERSION

SOT666

A

0.6

0.5

0.27

0.17

cD

p

0.18

1.7

0.08

1.5

IEC JEDEC JEITA

1.3

1.1

e

E

1.0

REFERENCES

e

0.5

H

L

w

1

1.7

1.5

p

E

0.3

0.1y0.1

0.1

EUROPEAN

PROJECTION

ISSUE DATE

01-08-27
04-11-08

Fig 4. Package outline SOT666

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 6 of 10

Philips Semiconductors

9. Packing information

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

Table 9: Packing methods

The indicated -xxx are the last three digits of the 12NC ordering code.

Type number Package Description Packing quantity

PEMB14 SOT666 4 mm pitch, 8 mm tape and reel; - -115 ­PUMB14 SOT363 4 mm pitch, 8 mm tape and reel; T1
PUMB14 SOT363 4 mm pitch, 8 mm tape and reel; T2

[1] For further information and the availability of packing methods, seeSection 14.
[2] T1: normal taping
[3] T2: reverse taping

[1]

3000 4000 10000

[2]

-115 - -135

[3]

-125 - -165

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 7 of 10

Philips Semiconductors

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

PEMB14; PUMB14

10. Revision history

Table 10: Revision history

Document ID Release date Data sheet status Change notice Doc. number Supersedes

PEMB14_PUMB14_1 20050217 Product data sheet - 9397 750 14405 -

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 8 of 10

Philips Semiconductors

11. Data sheet status

PEMB14; PUMB14

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

Level Data sheet status

I Objective data Development This data sheet contains data from the objective specification for product development. Philips

II Preliminary data Qualification Thisdata sheet contains data from the preliminary specification. Supplementary data will be published

III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the

[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at

URL http://www.semiconductors.philips.com.

[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.

[1]

Product status

12. Definitions

Short-form specification — The data in a short-form specification is

extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.

Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.

Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warrantythat suchapplications willbe suitable for
the specified use without further testing or modification.

[2] [3]

Definition

Semiconductors reserves the right to change the specification in any manner without notice.

at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.

right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).

13. Disclaimers

Life support — These products are not designed for use in life support

appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.

Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, andmakes no representations or warranties thatthese products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.

14. Contact information

For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [e-mail]

9397 750 14405 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Product data sheet Rev. 01 — 17 February 2005 9 of 10

Philips Semiconductors

PNP/PNP resistor-equipped transistors; R1 = 47 kΩ, R2 = open

15. Contents

1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

6 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3

7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 4

8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5

9 Packing information. . . . . . . . . . . . . . . . . . . . . . 7

10 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 8

11 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . . 9

12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

13 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

14 Contact information . . . . . . . . . . . . . . . . . . . . . 9

PEMB14; PUMB14

© Koninklijke Philips Electronics N.V. 2005

All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights.

Published in The Netherlands

Date of release: 17 February 2005

Document number: 9397 750 14405