Philips PTE4000CT User Manual

ReActiv

Treadmill

4.0 T

User manual

Please read this entire manual carefully before operating your new treadmill and save it for future use.

PTE4000CT

www.philips.com/welcome

Thank you for your recent purchase of the Philips physical rehabilitation treadmill 4.0 T. Philips physical therapy and exercise solutions provide simple, reliable products that oer the most relevant feedback to caregivers and users to achieve best-in-class outcomes and empower individuals to build condence in rebuilding and maintaining healthy lifestyles and keep in touch with their communities. Your new product has been manufactured by one of the world’s leading medical product manufacturers. It is backed by one of the most comprehensive warranties in the industry. Through our dealers, distributors and manufacturer’s representatives, we will do all we can to provide many years of successful and prosperous ownership. Your warranty and service needs will be addressed either through your regional sales representative or our highly trained service technicians.

It is their responsibility to provide you with both the technical knowledge and access to service personnel to make your ownership experience more informed, and resolve any issues quickly.

Product registration

This will ensure we have all your details quickly at hand in dealing with any after sales support. For fastest support visit us and self service solution at : www.philips.com/support

Philips therapy solutions

Delivering better outcomes

Contents

Important safety instructions 4

Important electrical information

Important operation instructions 8

Features 9

Assembly instructions 10

Console operation 17

Using a heart rate transmitter 40

Maintenance 43

Important safety instructions

Attention

Read all instructions in this manual before using this device.

Danger

To reduce the risk of electric shock disconnect this device from the electrical outlet prior to cleaning and/or service work.

Warning

• Before beginning exercise on this product, or any exercise program, consult a physician. This is especially important for persons over the age of 35 or persons with preexisting health conditions.

• There are obvious pinch points and other caution areas that can

cause harm.

• Children under the age of 13 should be supervised to ensure that they do not play with the device.

• Keep hands away from all moving parts.

• Never drop or insert any object into any openings.

• Do not use outdoors.

• Do not operate under a blanket or pillow. Excessive heating can occur and cause ﬁre, electric shock, or injury to persons.

• Do not attempt to use this product for any purpose other than for

the purpose it is intended.

• Do not operate where aerosol (spray) products are being used or

where oxygen is being administered. Sparks from the motor may ignite a highly gaseous environment.

• Never operate the product if it has a damaged cord or plug, if the

product is not working properly, call your dealer. If it has been dropped or damaged, or dropped into water, call your dealer.

• Keep the cord away from heated surfaces.

• The hand pulse sensors are not medical devices. Various factors,

including the user’s movement, may aect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in determining heart rate trends in general.

• Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death. If you feel faint stop exercising

immediately.

• Wear proper shoes. High heels, dress shoes, sandals or bare feet are

not suitable for use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

• The product should never be left unattended when plugged in.

Unplug from outlet when not in use and before putting on or taking o parts.

• Connect the product to a properly grounded outlet only. See

Grounding Instructions.

• This appliance is not intended for use by persons with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Maximum User Weight: 450 lbs,

• ASTM F2115-05 Speciﬁcations 6.1.2.11—The recommended minimum

clearance required around each treadmill for access to, passage around, and emergency dismount shall be stated. The minimum

dimensions are to be: 0.5 m (19.7 in.) on each side of the treadmill, and 1m (39 in.) behind the machine.

Important electrical information

Warning

• Never use a ground fault circuit interrupter (GFCI) wall outlet with

this treadmill. As with any appliance with a large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.

• Never remove any cover without ﬁrst disconnecting AC power. If AC voltage varies by 10% or more outside of speciﬁed range (90 to 120V), the performance of your treadmill may be aﬀected. Such

conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed

electrician for proper testing.

• Never expose this product to rain or moisture. This product is not

designed for use outdoors, near a pool or spa, or in any other high humidity environment. The operating temperature specication is 5

to 48 degrees Celsius (40 to 120 degrees Fahrenheit)and humidity is 95% non-condensing (no water drops forming on surfaces).

• Circuit Breakers: Some circuit breakers are not rated for high inrush

currents that can occur when a treadmill is rst turned on or even

during use. If your treadmill is tripping the circuit breaker (even though it is the proper current rating) but the circuit breaker on the

treadmill itself does not trip, you will need to replace the facility breaker with a high inrush type. This is not a warranty defect. This is a condition we as a manufacturer have no ability to control. This part is available through most electrical supply stores. The electrical

outlet used should have a dedicated 20-amp circuit breaker.

Grounding instructions

This product must be grounded. In the unlikely event that the treadmill’s electrical system should malfunction or break grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

Danger Improper connection of the equipment-grounding conductor can

result in a risk of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not t the outlet. Instead have a proper outlet installed by a

qualied electrician.

Important operation instructions

• Never operate this product without reading and completely

understanding the results of any operational change you request from

the console.

• Understand that changes in speed or incline do not occur immediately.

Set your desired speed or incline level on the console and release the

adjustment key. The console will obey the command gradually.

• Use caution while participating in other activities while on your

Treadmill; such as watching television, reading, etc. These distractions

may cause you to lose balance which may result in serious injury.

• Do not use excessive pressure on console control keys. They are

precision set to function properly with little nger pressure.

Safety tether cord

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the treadbelt. Pulling this safety tether cord will stop treadbelt movement. To use:

• Place the magnet into position on the round metal portion of the

console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from

unauthorized use.

• Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough power to

minimize accidental, unexpected stopping. The clip should be

attached securely to make certain it does not come o. Be familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled o the console. Use the Stop / Pause switch in normal operation.

Features

4.0 T – Treadmill

Parts and adjustments

1. Console

2. Handlebar with heart rate grips

3. Safety tether cord placement

4. Water bottle holder

5. Extended handrails

6. Console mast

7. Motor cover

8. Belt

9. Side rail

10. Tracking / Tension adjustment bolts

Assembly instructions

Unpacking

• Cut the straps, then lift the box over the unit and unpack.

• Carefully remove all parts from the carton and inspect for any damage

or missing parts. If parts are damaged or missing, contact your dealer immediately.

• Locate the hardware package. Remove the tools ﬁrst. Remove the

hardware for each step as needed to avoid confusion. The numbers in

the instructions that are in parenthesis (#) are the item number from

the assembly drawing for reference.

Tools included

• 5mm L Allen Wrench

• 6mm L Allen Wrench

• 1 Phillips Screwdriver

Parts included

• 1 Main Frame

• 2 Console Mast

• 1 Main Panel

• 1 Console

• 1 Console Bracket Cover

• 4 Handrail Cover

• 2 Console Mast Cover

• 2 End Caps

1010

Assembly

Read each step’s instructions and study the drawing carefully to become familiar with all the parts and procedures before beginning each step.

Step 1.

• Attach one Fixing Plate (66) and Left Console Mast (33) to Frame (1) using ﬁve Bolts (128), ﬁve Split Washers (130), and ﬁve Flat Washers (129). Do not tighten before putting the console on.

• Connect Wires (41) from the Right Console Mast (34) with another Wires (178 ) from the Frame (1). Then attach another Fixing Plate (66) and Right Console Mast (34) to Frame (1) using ﬁve Bolts (128), ﬁve Split Washers (130), and ﬁve Flat Washers (129). Do not pinch Wires

(41 & 178). Do not tighten before putting the console on.

Hardware for step 1

Part Type Description

128

129

130

128

Bolt

Flat washer

Split washer

129

130

3/8" × 3"

Ø3/8” × Ø35 x 2T

Ø10 × 2.0T

178

129

Qty

130

129

128

130

128

142

Step 2.

• Connect Wires (41) with Handle Bar Wires (36A) from Handle Bar Frame (5). Do not pinch Wires (41 & 36A).

• Install Handle Bar Frame (3) onto the console masts using Bolts (131), Split Washers (130) and Flat Washers (166). Do not tighten before

putting the console on.

• Connect Wires (40) from Lower Console Assembly (3) with Handle Bar Wires (36A).

• Install Lower Console Assembly (3) onto Handle Bar Frame (3) using Bolts (167), Split Washers (130) and Flat Washers (166). Do not tighten

before putting the console on.

Hardware for step 2

Part

130

131

166

167

Type Description

Split washer

Bolt

Flat washer

Bolt

131 130 166

166 130

Ø10 × 2.0T

M8 × 45mm

Ø8.5 × Ø16 × 1.5T

M8 × 50mm

131 130 166

36(B)

167

166 130

36(A)

Qty

141

Step 3.

• Attach Left Handrail (74) onto Frame (1) and Lower Console Assembly (3), at the top area using two Bolts (131), two Split Washers (130), two Flat Washers (166), one Bolt (132) and one Curved Washer (133), at the bottom area using two Bolts (135), two Split Washers (130) and two Flat Washers (166). Do not tighten before putting both handrails on.

• Attach Right Handrail (74) onto Frame (1) and Lower Console Assembly (3), at the top area using two Bolts (131), two Split Washers (130), two Flat Washers (166), one Bolt (132) and one Curved Washer (133), at the bottom area using two Bolts (135), two Split Washers (130) and two Flat Washers (166).

• Tight all bolts and washers from previous step.

Hardware for step 3

Part Type Description

130

131

132

133

135

137

138

166

Split washer

Bolt

Curved washer

Bolt

Flat washer

Flat Washer

Ø10 × 2.0T

M8 × 45mm

M8 × 80mm

Ø10 × Ø23 × 1.5T

M8 × 20mm

M8 × 35mm

Ø5/16" × Ø23 × 1.5T

Ø8.5 × Ø16 × 1.5T

Qty

132

131

130

137

166

133

138

132

133

166

130

131

137

138

130

135

166

135

166

130

141

Step 4.

• Attach Console Frame (4) on Lower Console Assembly (3) using four Bolts (131), four Split Washers (130) and four Flat Washers (166).

• Connect the Wiring Harness (35、37、38、39、40、58) with Console (28), attach Console (28) on Console Frame (4) using two Screws (116), and two Screws (134).

Hardware for step 4

Part Type Description

116

130

131

134

166

Screw

Split washer

Bolt

Screw

Flat washer

116

131

130

134

166

M5 × 12mm

Ø10 × 2.0T

M8 × 45mm

M5 × 40mm

Ø8.5 × Ø16 × 1.5T

134

166

Qty

143

141

Step 5.

• Attach Right & Left Lower Console Mast (26 & 27) on Frame (1) using four Screws (116) (Black).

• Attach Right & Left Upper Console Mast (64、65) on Right & Left Handrail (74、75) using four Screws (136) (Silver).

• Attach Bottle Holder (31) on Handle Bar Frame (5) using four Tapping Screws (140 ).

• Attach Console Back Cover (32) on Console Frame (4) using four Screws (116).

Hardware for step 5

Part Type Description

116

136

140

Screws

Tapping screws

116

136

M5x 12mm

M5x 10mm

140

136

Qty

136

140

116

143

Console operation

4.0 T Console

Message window

Dot matrix window

Incline/Decline keys

Program keys

Quick Keys

Speed Keys

Function Keys

Power on

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill

below the motor hood. Ensure that the safety key is installed, as the

treadmill will not power on without it.

When the power switch is turned on the console will go to the start up display, also known as Idle Mode. The Message Window will be

scrolling the start up message. You may now begin to use the 4.0 T.

CSAFE feature

Your console is equipped with a CSAFE feature. The Power (POWER)

port can be used for powering a remote controlled audio-visual system by connecting a cable from the remote to the Power port at the back of

the console. The Communication port (COMM) can be used to interact

with software applications.

Quick start

This is the quickest way to start a workout. After the console powers up

you just press the Start key to begin. This will initiate the Quick Start

mode. In Quick Start, the Time will count up from zero, all workout data

will start to accrue and the workload may be adjusted manually by

pressing the Plus and Minus keys. As you increase the workload more rows will light indicating a harder workout.

+ 41 hidden pages