Philips P725S, PM725S User Manual

PM725S/P725S

FRONT COVER

PM725.manual 5/27/08 9:23 AM Page 1

Congratulations on your purchase of Philips Universal Remote Control. Philips Universal Remotes let you replace a broken or lost remote or combine more than one remote into one. In addition, this remote is equipped with a command learning feature which lets the remote learn commands from your original equipment remote control!

This remote control operates the common features of most but not all models and brands of IR Infrared Controlled Video Equipment. This remote may provide functions that are not available on your equipment. Some functions of your particular equipment (e.g. menu functions) may not be controlled by this remote. In such cases, use the original remote control for your equipment. Please use this manual to become familiar with your Philips Universal Remote. After you are familiar with your remote the first thing you need to do is to install batteries and setup your remote for your particular product and brand.

Thank you for buying a Philips remote and we hope it will give you many years of service.

Introduction

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Battery Installation. . . . . . . . . . . . . . . . . . . 4

Battery Saver . . . . . . . . . . . . . . . . . . . . . . . 4

Code Saver. . . . . . . . . . . . . . . . . . . . . . . . . 4

Power-On default . . . . . . . . . . . . . . . . . . . . 5

TV Punch Through . . . . . . . . . . . . . . . . . . . . 5

VCR Punch Through . . . . . . . . . . . . . . . . . . . 5

Code Setup . . . . . . . . . . . . . . . . . . . . . . . . 5

Button Functions . . . . . . . . . . . . . . . . . . . . . . . 6

Advanced DVD and SAT Button Functions . . . . . . . 8

TV/VCR Punch-Through . . . . . . . . . . . . . . . . . . . 9

TV/VCR and TV/DVD Combo units. . . . . . . . . . . . . 9

Code Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Direct Code Entry . . . . . . . . . . . . . . . . . . . 10

Code Search . . . . . . . . . . . . . . . . . . . . . . . 11

Code Identification . . . . . . . . . . . . . . . . . . 12

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Code Learning. . . . . . . . . . . . . . . . . . . . . . . . . 13

Tips on Learning . . . . . . . . . . . . . . . . . . . . 14

Learning Commands. . . . . . . . . . . . . . . . . . 14

Clearing Learned commands for a mode . . . . 15

Master Clear . . . . . . . . . . . . . . . . . . . . . . . 15

Product Operation . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 17

Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Table of Contents

PM725.manual 5/27/08 9:23 AM Page 2

POWER-ON DEFAULT

The remote powers on in TV mode.

TV VOLUME/MUTE PUNCH-THROUGH

T h e TV Vo l u me / M ute punc h - t h rough feature lets you c o n t r ol the Vo l u me and Mute func t ion of your TV in a n y mo d e pro g r a m m ed to be a VCR, DVD, Cable or SAT de v i c e, without ne e d i ng to change to TV mo d e. This f e a t u r e is also available if AUX mo de is pro g r a m m e d to cont r ol a second VCR, Cable or SAT de v i c e.

VCR PUNCH-THROUGH

Punch-through to VCR mode is only allowed in TV, VCR and Cable modes. SAT/DBS and CD/Audio are dedicated to their modes.

CODE SETUP

T h e Code Search button is used to setup the re m o t e . You can either setup the re m ote using the code fo r your bra n d of pro duct, from the code tables, or you can search through the library of codes until you f i n d a code that works for your pro duc t .

NOTE: You can store any kind of code under any mode ( e xcept TV). I.E. you can store a VCR code under the CBL ke y, or a DVD code under the VCR ke y, etc. You can store ANY kind of code under the AUX key. However, you can only store TV codes under the TV ke y .

BATTERY INSTALLATION

1. On the back of the remote,

push down on the tab and lift the cover off.

2. Match the batteries to the

+ and - marks inside the battery case, then insert 2 AAA Alkaline batteries.

3. Press the battery cover

back into place.

BATTERY SAVER

Your remote automatically times out if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions).

CODE SAVER

Codes are stored in permanent memory while you are changing batteries so you will not lose any codes stored in the remote while you are changing batteries. If you do not want to delete any stored codes, see page 15.

Setup

Code Search

PM725.manual 5/27/08 9:23 AM Page 4

Button Functions, Cont.

Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. Prev.Ch. may becalled RECALL,or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must be equipped with Prev. Ch. ability for the Prev. Ch. button to operate this feature.

Button Functions

MUTE

Turns off the TV sound while the picture remains.

TV,VCR,CBL, AUX, etc.

Selects product to be operated.

Indicator light

Lights when any button is pressed.

CHANNEL Up/Down

Changes the channels.

VOLUME Up/Down

Changes the volume level of the product, normally the TV.

Prev.Ch.

Returns to the previously selected channel, or DVD repeat toggle.

CC(Subtitle)

TV Closed Caption (if your TV has this feature ) or DVD Subtitle toggle.

LEARN

Used to setup learning functions.

TV/VCR/Input Toggle

For some TVs, press repeatedly to select from available viewing sources (antenna, cablebox,VCR,etc.).

TOGGLE

Swaps TV PIP screens.

GUIDE

Displays on-screen program guide.

QUIT

Used to exit menu functions.

CHAPTER+/-

C o n t r ols DVD/ CD tra c k s e l e c t i on i.e. DVD/CD Track Skip Up/Down (in DVD and SAT mo de s ) . Note: T h e VCR Tra n s p o r t keys also cont r ol DVD w h en in DVD Mo d e.

RECORD,PLAY, STOP, REW, FF, PAUSE

VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan-/+.

Code Search

For setup.

POWER

Turns product On or Off.

SLEEP

Turns off the TV after a period of 1 to 99 minu t e s .

PIP

TV Picture-inPicture control.

NUMBERS

Enter numbers for direct channel selection. Some products require Enter to be pressed after channel selection.

ENTER

Used after direct channel number entry to immediately change to the selected channel.

INFO/Select

displays/selects on-screen channel information, etc.

Access the Menu functions of the device you are controlling.

Selects menu items for the device you are controlling.

N o t e : The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.

PM725.manual 5/27/08 9:23 AM Page 6

TV/VCR PUNCH-THROUGH

VCR Punch-through is automatically available in TV and Cable Modes only i.e. the 6 VCR keys (Play, Pause, Stop,Record, FF and Rewind) will punchthrough to the device programmed under VCR when in either TV or Cable Modes.

The TV/VCR/INPUT button performs the TV/VCR antenna switch function when in VCR Mode.

The TV/VCR/INPUT button performs the A.B switch function when in Cable Mode.

The TV/VCR/INPUT button performs the TV/SAT switch function when in SAT Mode.

The TV/VCR/INPUT button performs the INPUT source switch function when in TV Mode.

The TV/VCR/INPUT button performs the DVD Setup function when in DVD Mode.

The TV/VCR/INPUT button performs nonspecific functions when in CD/Audio Mode.

MISC.

SELECT means same as OKAY - some manufacturers

use OKAY label and others use SELECT label on their remotes.

CC will activate the Closed Caption feature if your device has that feature.

PIP (Picture-in-Picture) and TOGGLE buttons operate your television’s Picture-in-Picture features. Use PIP to activate the feature and TOGGLE to swap between the displayed pictures on your TV.

TV/VCR and TV/DVD Combo units

Note that for some TV/VCR and TV/DVD combo units you might need to set up two different buttons to control both parts of the combo unit. E.G., (referring to the Direct Code Entry section on the following page) you might need to set up a code under the TV button to control the TV part of the combo unit AND a separate code for the VCR or DVD under any other button you choose.

DVD

Scan+ and Scan- buttons control the speed of

Fast Forward and Reverse Playback respectively. Chapter+ and Chapter- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. Subtitle button brings up DVD Subtitle Menu for Subtitle selection and display. Repeat button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track. Info/Select button brings up DVD Display or C o n t r ol Me n u for Chapter/Track/Title nu m b e r, Time re ma i n i n g/elapsed ind i c a t i on, system info r m a t i on, etc. Menu b r i n gs up the DVD disc Me n u screen - use with the Up, Down, Left & Rig h t na v ig a t i on buttons. OK button is used for on-screen Menu selection. Note some DVD players require the Play button to be used. Quit button is used to Exit or Clear on-screen Menu displays. Play button is used to start Disc playback and for Menu selection on some DVD players.

Stop button stops Disc playback. Pause button will pause Disc playback - press Play

to resume.

Note - in DVD Mode the INPUT button activates the DVD Players SETUP Menu.

SAT

Guide button displays on-screen Satellite

Channel Guide. Chapter+ and Chapter- buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems. Info/Select button brings up Satellite Display screen for current Channel and system information. Menu b r i n gs up the Satellite Me n u screen - use with t h e Up, Down, Left & Rig h t na v i g a t ion buttons.

OK button is used for on-screen Menu selection. Quit button is used to Exit or Clear on-screen

Menu displays.

Input button perfo r m s the Satellite TV/SAT func t i o n .

Advanced Button Functions

PM725.manual 5/27/08 9:23 AM Page 8

PROGRAMMING WITH CODE SEARCH

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. P ress and hold Code Search button until the re d i n d i cator stays on. Release the Code Search button.

3. P ress and release the de s i r ed mo d e button (TV, VCR, etc.). The red ind icator blinks, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

The above assumes that you want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure on page 10 and try ANY CBL code from the code tables, e.g. press CBL in step 2, page 10, and then enter ANY VCR code. Then follow the steps above.

Note: If the device does not have a Channel Up button,use Play (VCR only) or Power instead. Code Search starts from the currently stored three digit number under that mode e.g. if the mode has 100 codes and the currently stored code is 050 then the Code Search starts from 051 continuing to 100 before looping back to 000 and finishing at 050. This simplifies the process if you find that several preprogrammed codes operate your device by allowing you to bypass codes already tried.

1 1

DIRECT CODE ENTRY

1. Press and hold the Code Search button until the re d i n d i cator stays on. Release the Code Search button.

2. P r ess and release the de s i r ed mo de button (TV, VCR, etc.). The red ind icator blinks, then stays lit.

3. Enter the 3 digit code from the code tables. No t e : after a valid code ent r y, the red ind i cator turns off. For an invalid code, the red ind icator flashe s.

4. With your device on, press CHANNEL Up. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

Code Entry

1 0

1., 3.

Write your codes down here for easy reference later.

PM725.manual 5/27/08 9:23 AM Page 10

The Sleep feature enables the remote to turn off the TV after a period of 1 to 99 minutes. Remote is to be in TV mode to set a Sleep Timer. This feature works even if your TV does not have this feature.

1. Press and release the TV Mode key.

2. Press and hold the Sleep button until LED remains on (occurring after approx. 2-3 seconds).

3. Release Sleep button.

4. Press and release the numeric keys (01-99) for the time required. The LED will blink off to indicate keypress acceptance and remain off after second keypress.

5. TV Sleep Timer now set.

6. Leave the Remote pointing towards the TV

with an unobstructed path.

To cancel the Sleep Timer, press and hold the Sleep key until the LED blinks or press and release the Power key in TV Mode.

TIPS ON LEARNING

1. Use fresh batteries for both the Learning Remote and the Original Remote.

2. Pe r f orm a Master clear (see page 15) befo re learning .

3. Place the original remote end-to-end with the Learning Remote so the IR transmitters on both remotes are directly in line with each other. Keep the two remotes approximately one inch away from each other.

4. Experiment by learning 2 or 3 commands initially (to ensure compatibility and familiarity) and then carry out a Master Clear before completely learning your original remote’s commands.

5. Do not try to learn directly under an incandescent or low-energy light as these can cause interference with learning. Keep at least three feet away from any such light sources.

Code Learning

Sleep Timer

1 3

CODE IDENTIFICATION

1. P r ess and hold Code Search button until the re d i n d i cator stays on. Release the Code Search button.

2. P r ess and release the de s i r ed mo de button (TV, VCR, etc.). The red ind icator blinks, then stays lit.

3. Press a release the Code Search button. The indicator light blinks off.

4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn. When the indicator light blinks off the number you pressed is the first digit for the code you are searching for.

5. To find the second digit, repeat step 4, this time when the indicator light blinks off this is the second digit.

6. Repeat step 4 again to find the third digit.

Code Indentification

1 2

1.,3.

PM725.manual 5/27/08 9:23 AM Page 12

1 5

1 4

LEARNING COMMANDS

1. P ress and hold the Code Search button until the re d i n d i cator stays on. Release the Code Search button.

2. Press the mode button for the type of device you want to learn (TV, VCR, Cable, etc.). The indicator lights blinks off once.

3. Press the Learn button.

4. Press the button on the Learning Remote that you want to teach, e.g. Power.

5. Point both remotes at each other (see tips on page 11). Press and hold the Original Remote button that you want to learn, e.g. Power, until the indicator light turns off. If there is a problem with learning, the indicator light blinks for three seconds but the remote remains in the Learning mode. If this happens, repeat from Step 4.

6. Repeat Steps 4 and 5 for other buttons you want to learn.

7. Press and release the Code Search button when all desired original remote commands are learned. Code Learning is now complete.

Note: No functions may be stored under the Code Search button, any mode button, AUX button, or the Learn button.

Code Learning, Cont.

TO CLEAR ALL LEARNED COMMANDS UNDER A MODE

1. Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.

2. P r ess and release the button for the mo d e you want to clear (TV, VCR, etc.). The ind i cator blinks of f .

3. Press and release the Learn button TWICE. The indicator blinks off.

4. Press and release Code Search. The indicator blinks off.

All learned Comma n ds under that mo d e are now cleare d .

MASTER CLEAR - TO CLEAR ALL LEARNED COMMANDS, I.E. RETURN TO FACTORY DEFAULTS

1. Press and hold the Code Search button until the indicator light turns on. Release the Code Search button.

2. Press and release the Learn button TWICE. The indicator blinks off.

3. Press and release Code Search. The indicator blinks off.

All Learned comma nds in the re mote are now cleare d .

Code Learning, Cont.

1,4.

1.,3.

Aprox. 1 inch apart

PM725.manual 5/27/08 9:23 AM Page 14

REMOTE DOES NOT OPERATE YOUR PRODUCT.

• Press the mode button of the product you want to control.

• Program the remote with a new code.

• I n stall new batterie s . (You mig h t have to re p r o g ra m your re m ote after ins t a l l i ng new batterie s . )

• R e m ote may not be compatible with your pro d uct.

REMOTE DOES NOT OPERATE SOME FEATURES OF YOUR PRODUCT.

• Program remote with a new code.

• Remote may not be able to operate all features of your product or button names might be different than your product.

I N D I C ATOR LIGHT BLINKS AFTER YOU PROGRAM A PRODUCT CODE.

• Remote did not accept the code.

• Try to pro g r am the code again or try a differe n t code.

Troubleshooting

1 7

1 6

After the batteries are installed and you have p r o g r a m med the re m ote for the codes that opera t e your pro duc t s , you can use your re m ote to operate a T V, VCR, Cable Box, CD Player, or Satellite System, etc.

Product Operation

TO OPERATE:

1. Press the TV, VCR, CBL, SAT, etc. button (depending on which product you want to operate).

2. Aim the remote at the product.

3. Press POWER to turn on the product.

4. Press other buttons to operate the features of your product.

TV (Press TV First)

VCR

(Press VCR First)

DVD Player

(Press DVD First)

Satellite System

(Press SAT First)

CD Player

(Press CD First)

PM725.manual 5/27/08 9:23 AM Page 16

+ 20 hidden pages