Philips PET830/98 Quick Start Guide
PET830_93-qsg.qxd 2007.7.25 10:59 Page 1
Philips Portable DVD Player PET830
Quick start guide
Register your product and get support at www.philips.com/welcome
1 Charge
user. |
1 |
|
|
|
|
||
|
|
2 |
3 |
|
|
|
|
1 |
Switch OFF the set. |
|
|
2 |
Connect the supplied adaptor to the set |
||
|
and the AC outlet. |
|
|
3 |
The RED light comes on. |
|
|
registered |
|
|
|
4 |
The battery pack will be fully charged in |
||
|
approximately 4 hours.When the RED light |
||
forgoes off, it means that the battery pack is |
|||
|
fully charged. |
|
|
TIPdemo Your battery will continue to charge while the player is in use. However, the RED light will appear and it will take approximately 8
hours to fully charge the battery pack.
2 Enjoy
1 5
6
3
2
1
2The GREEN light comes on.
3Slide the disc into the slot on the right side of the player with the label side of the disc facing the front of the player.
4The set will automatically start to play.
5Use the control keys on the set or the remote control.
6To eject the disc, press 9 / twice.
IMPORTANT Do not load any 8-cm mini DVD discs into the player.The DVD player does not play mini DVD discs. If the disc gets stuck inside the player, press 9 / twice to eject the disc.Try the following steps if the disc remains stuck inside the player.
1Power off and then power on the player. Press 9 / to eject the disc.
2If this does not work, hold the player with the slot facing down, gently shake the player until the disc comes out.
3 Connect to TV
1Connect the set to the TV as shown.
2Please select an appropriate input or source on the TV.You can consult the user’s guide of your TV. (If your TV does not have Audio and Video inputs, you will need to purchase a RF modulator. Please consult your dealer for more information.)
PHILIPS
Loading...